diff --git a/api/openapi-spec/swagger.json b/api/openapi-spec/swagger.json index 4e85edc5d3a..53a6dca8158 100644 --- a/api/openapi-spec/swagger.json +++ b/api/openapi-spec/swagger.json @@ -5919,7 +5919,7 @@ "description": "EndpointPort is a tuple that describes a single port.", "properties": { "appProtocol": { - "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and http://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", + "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", "type": "string" }, "name": { @@ -10133,7 +10133,7 @@ "description": "ServicePort contains information on service's port.", "properties": { "appProtocol": { - "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and http://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", + "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", "type": "string" }, "name": { @@ -10934,7 +10934,7 @@ "description": "EndpointPort represents a Port used by an EndpointSlice", "properties": { "appProtocol": { - "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and http://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", + "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", "type": "string" }, "name": { @@ -11136,7 +11136,7 @@ "description": "EndpointPort represents a Port used by an EndpointSlice", "properties": { "appProtocol": { - "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and http://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", + "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", "type": "string" }, "name": { diff --git a/api/openapi-spec/v3/api__v1_openapi.json b/api/openapi-spec/v3/api__v1_openapi.json index 489422436c9..793a6797062 100644 --- a/api/openapi-spec/v3/api__v1_openapi.json +++ b/api/openapi-spec/v3/api__v1_openapi.json @@ -1378,7 +1378,7 @@ "description": "EndpointPort is a tuple that describes a single port.", "properties": { "appProtocol": { - "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and http://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", + "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", "type": "string" }, "name": { @@ -5853,7 +5853,7 @@ "description": "ServicePort contains information on service's port.", "properties": { "appProtocol": { - "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and http://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", + "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", "type": "string" }, "name": { diff --git a/api/openapi-spec/v3/apis__discovery.k8s.io__v1_openapi.json b/api/openapi-spec/v3/apis__discovery.k8s.io__v1_openapi.json index 5c45a7ac5c8..181a0dff115 100644 --- a/api/openapi-spec/v3/apis__discovery.k8s.io__v1_openapi.json +++ b/api/openapi-spec/v3/apis__discovery.k8s.io__v1_openapi.json @@ -124,7 +124,7 @@ "description": "EndpointPort represents a Port used by an EndpointSlice", "properties": { "appProtocol": { - "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and http://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", + "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", "type": "string" }, "name": { diff --git a/api/openapi-spec/v3/apis__discovery.k8s.io__v1beta1_openapi.json b/api/openapi-spec/v3/apis__discovery.k8s.io__v1beta1_openapi.json index a816f8a6062..40ed081b3e5 100644 --- a/api/openapi-spec/v3/apis__discovery.k8s.io__v1beta1_openapi.json +++ b/api/openapi-spec/v3/apis__discovery.k8s.io__v1beta1_openapi.json @@ -120,7 +120,7 @@ "description": "EndpointPort represents a Port used by an EndpointSlice", "properties": { "appProtocol": { - "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and http://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", + "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", "type": "string" }, "name": { diff --git a/pkg/apis/core/types.go b/pkg/apis/core/types.go index 26aff9f8b45..ae711788eee 100644 --- a/pkg/apis/core/types.go +++ b/pkg/apis/core/types.go @@ -3938,7 +3938,7 @@ type ServicePort struct { // The application protocol for this port. // This field follows standard Kubernetes label syntax. // Un-prefixed names are reserved for IANA standard service names (as per - // RFC-6335 and http://www.iana.org/assignments/service-names). + // RFC-6335 and https://www.iana.org/assignments/service-names). // Non-standard protocols should use prefixed names such as // mycompany.com/my-custom-protocol. // +optional @@ -4088,7 +4088,7 @@ type EndpointPort struct { // The application protocol for this port. // This field follows standard Kubernetes label syntax. // Un-prefixed names are reserved for IANA standard service names (as per - // RFC-6335 and http://www.iana.org/assignments/service-names). + // RFC-6335 and https://www.iana.org/assignments/service-names). // Non-standard protocols should use prefixed names such as // mycompany.com/my-custom-protocol. // +optional diff --git a/pkg/apis/discovery/types.go b/pkg/apis/discovery/types.go index 2752447d893..20c81e8dada 100644 --- a/pkg/apis/discovery/types.go +++ b/pkg/apis/discovery/types.go @@ -165,7 +165,7 @@ type EndpointPort struct { // The application protocol for this port. // This field follows standard Kubernetes label syntax. // Un-prefixed names are reserved for IANA standard service names (as per - // RFC-6335 and http://www.iana.org/assignments/service-names). + // RFC-6335 and https://www.iana.org/assignments/service-names). // Non-standard protocols should use prefixed names such as // mycompany.com/my-custom-protocol. // +optional diff --git a/staging/src/k8s.io/api/core/v1/generated.proto b/staging/src/k8s.io/api/core/v1/generated.proto index 07d4b61c3e9..791dbaa15a1 100644 --- a/staging/src/k8s.io/api/core/v1/generated.proto +++ b/staging/src/k8s.io/api/core/v1/generated.proto @@ -1052,7 +1052,7 @@ message EndpointPort { // The application protocol for this port. // This field follows standard Kubernetes label syntax. // Un-prefixed names are reserved for IANA standard service names (as per - // RFC-6335 and http://www.iana.org/assignments/service-names). + // RFC-6335 and https://www.iana.org/assignments/service-names). // Non-standard protocols should use prefixed names such as // mycompany.com/my-custom-protocol. // +optional @@ -4918,7 +4918,7 @@ message ServicePort { // The application protocol for this port. // This field follows standard Kubernetes label syntax. // Un-prefixed names are reserved for IANA standard service names (as per - // RFC-6335 and http://www.iana.org/assignments/service-names). + // RFC-6335 and https://www.iana.org/assignments/service-names). // Non-standard protocols should use prefixed names such as // mycompany.com/my-custom-protocol. // +optional diff --git a/staging/src/k8s.io/api/core/v1/types.go b/staging/src/k8s.io/api/core/v1/types.go index d0ccfbbc6b9..bdba5ab69bb 100644 --- a/staging/src/k8s.io/api/core/v1/types.go +++ b/staging/src/k8s.io/api/core/v1/types.go @@ -4507,7 +4507,7 @@ type ServicePort struct { // The application protocol for this port. // This field follows standard Kubernetes label syntax. // Un-prefixed names are reserved for IANA standard service names (as per - // RFC-6335 and http://www.iana.org/assignments/service-names). + // RFC-6335 and https://www.iana.org/assignments/service-names). // Non-standard protocols should use prefixed names such as // mycompany.com/my-custom-protocol. // +optional @@ -4738,7 +4738,7 @@ type EndpointPort struct { // The application protocol for this port. // This field follows standard Kubernetes label syntax. // Un-prefixed names are reserved for IANA standard service names (as per - // RFC-6335 and http://www.iana.org/assignments/service-names). + // RFC-6335 and https://www.iana.org/assignments/service-names). // Non-standard protocols should use prefixed names such as // mycompany.com/my-custom-protocol. // +optional diff --git a/staging/src/k8s.io/api/core/v1/types_swagger_doc_generated.go b/staging/src/k8s.io/api/core/v1/types_swagger_doc_generated.go index 1dc28b9985b..1ebe5171660 100644 --- a/staging/src/k8s.io/api/core/v1/types_swagger_doc_generated.go +++ b/staging/src/k8s.io/api/core/v1/types_swagger_doc_generated.go @@ -506,7 +506,7 @@ var map_EndpointPort = map[string]string{ "name": "The name of this port. This must match the 'name' field in the corresponding ServicePort. Must be a DNS_LABEL. Optional only if one port is defined.", "port": "The port number of the endpoint.", "protocol": "The IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.", - "appProtocol": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and http://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", + "appProtocol": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", } func (EndpointPort) SwaggerDoc() map[string]string { @@ -2243,7 +2243,7 @@ var map_ServicePort = map[string]string{ "": "ServicePort contains information on service's port.", "name": "The name of this port within the service. This must be a DNS_LABEL. All ports within a ServiceSpec must have unique names. When considering the endpoints for a Service, this must match the 'name' field in the EndpointPort. Optional if only one ServicePort is defined on this service.", "protocol": "The IP protocol for this port. Supports \"TCP\", \"UDP\", and \"SCTP\". Default is TCP.", - "appProtocol": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and http://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", + "appProtocol": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", "port": "The port that will be exposed by this service.", "targetPort": "Number or name of the port to access on the pods targeted by the service. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. If this is a string, it will be looked up as a named port in the target Pod's container ports. If this is not specified, the value of the 'port' field is used (an identity map). This field is ignored for services with clusterIP=None, and should be omitted or set equal to the 'port' field. More info: https://kubernetes.io/docs/concepts/services-networking/service/#defining-a-service", "nodePort": "The port on each node on which this service is exposed when type is NodePort or LoadBalancer. Usually assigned by the system. If a value is specified, in-range, and not in use it will be used, otherwise the operation will fail. If not specified, a port will be allocated if this Service requires one. If this field is specified when creating a Service which does not need it, creation will fail. This field will be wiped when updating a Service to no longer need it (e.g. changing type from NodePort to ClusterIP). More info: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport", diff --git a/staging/src/k8s.io/api/discovery/v1/generated.proto b/staging/src/k8s.io/api/discovery/v1/generated.proto index d04889aa445..3e95bd456fd 100644 --- a/staging/src/k8s.io/api/discovery/v1/generated.proto +++ b/staging/src/k8s.io/api/discovery/v1/generated.proto @@ -141,7 +141,7 @@ message EndpointPort { // The application protocol for this port. // This field follows standard Kubernetes label syntax. // Un-prefixed names are reserved for IANA standard service names (as per - // RFC-6335 and http://www.iana.org/assignments/service-names). + // RFC-6335 and https://www.iana.org/assignments/service-names). // Non-standard protocols should use prefixed names such as // mycompany.com/my-custom-protocol. // +optional diff --git a/staging/src/k8s.io/api/discovery/v1/types.go b/staging/src/k8s.io/api/discovery/v1/types.go index b278b74f03d..13591436d14 100644 --- a/staging/src/k8s.io/api/discovery/v1/types.go +++ b/staging/src/k8s.io/api/discovery/v1/types.go @@ -177,7 +177,7 @@ type EndpointPort struct { // The application protocol for this port. // This field follows standard Kubernetes label syntax. // Un-prefixed names are reserved for IANA standard service names (as per - // RFC-6335 and http://www.iana.org/assignments/service-names). + // RFC-6335 and https://www.iana.org/assignments/service-names). // Non-standard protocols should use prefixed names such as // mycompany.com/my-custom-protocol. // +optional diff --git a/staging/src/k8s.io/api/discovery/v1/types_swagger_doc_generated.go b/staging/src/k8s.io/api/discovery/v1/types_swagger_doc_generated.go index 84fcfa2395e..bb3c8769fd6 100644 --- a/staging/src/k8s.io/api/discovery/v1/types_swagger_doc_generated.go +++ b/staging/src/k8s.io/api/discovery/v1/types_swagger_doc_generated.go @@ -68,7 +68,7 @@ var map_EndpointPort = map[string]string{ "name": "The name of this port. All ports in an EndpointSlice must have a unique name. If the EndpointSlice is dervied from a Kubernetes service, this corresponds to the Service.ports[].name. Name must either be an empty string or pass DNS_LABEL validation: * must be no more than 63 characters long. * must consist of lower case alphanumeric characters or '-'. * must start and end with an alphanumeric character. Default is empty string.", "protocol": "The IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.", "port": "The port number of the endpoint. If this is not specified, ports are not restricted and must be interpreted in the context of the specific consumer.", - "appProtocol": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and http://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", + "appProtocol": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", } func (EndpointPort) SwaggerDoc() map[string]string { diff --git a/staging/src/k8s.io/api/discovery/v1beta1/generated.proto b/staging/src/k8s.io/api/discovery/v1beta1/generated.proto index ec9f47e4b15..f4b23eae1bc 100644 --- a/staging/src/k8s.io/api/discovery/v1beta1/generated.proto +++ b/staging/src/k8s.io/api/discovery/v1beta1/generated.proto @@ -144,7 +144,7 @@ message EndpointPort { // The application protocol for this port. // This field follows standard Kubernetes label syntax. // Un-prefixed names are reserved for IANA standard service names (as per - // RFC-6335 and http://www.iana.org/assignments/service-names). + // RFC-6335 and https://www.iana.org/assignments/service-names). // Non-standard protocols should use prefixed names such as // mycompany.com/my-custom-protocol. // +optional diff --git a/staging/src/k8s.io/api/discovery/v1beta1/types.go b/staging/src/k8s.io/api/discovery/v1beta1/types.go index 095fca706b4..8620004f44f 100644 --- a/staging/src/k8s.io/api/discovery/v1beta1/types.go +++ b/staging/src/k8s.io/api/discovery/v1beta1/types.go @@ -182,7 +182,7 @@ type EndpointPort struct { // The application protocol for this port. // This field follows standard Kubernetes label syntax. // Un-prefixed names are reserved for IANA standard service names (as per - // RFC-6335 and http://www.iana.org/assignments/service-names). + // RFC-6335 and https://www.iana.org/assignments/service-names). // Non-standard protocols should use prefixed names such as // mycompany.com/my-custom-protocol. // +optional diff --git a/staging/src/k8s.io/api/discovery/v1beta1/types_swagger_doc_generated.go b/staging/src/k8s.io/api/discovery/v1beta1/types_swagger_doc_generated.go index 2466a48cea6..96e6d13ef7f 100644 --- a/staging/src/k8s.io/api/discovery/v1beta1/types_swagger_doc_generated.go +++ b/staging/src/k8s.io/api/discovery/v1beta1/types_swagger_doc_generated.go @@ -67,7 +67,7 @@ var map_EndpointPort = map[string]string{ "name": "The name of this port. All ports in an EndpointSlice must have a unique name. If the EndpointSlice is dervied from a Kubernetes service, this corresponds to the Service.ports[].name. Name must either be an empty string or pass DNS_LABEL validation: * must be no more than 63 characters long. * must consist of lower case alphanumeric characters or '-'. * must start and end with an alphanumeric character. Default is empty string.", "protocol": "The IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.", "port": "The port number of the endpoint. If this is not specified, ports are not restricted and must be interpreted in the context of the specific consumer.", - "appProtocol": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and http://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", + "appProtocol": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", } func (EndpointPort) SwaggerDoc() map[string]string { diff --git a/staging/src/k8s.io/cli-runtime/artifacts/openapi/swagger.json b/staging/src/k8s.io/cli-runtime/artifacts/openapi/swagger.json index 2a7146571af..3d17720e438 100644 --- a/staging/src/k8s.io/cli-runtime/artifacts/openapi/swagger.json +++ b/staging/src/k8s.io/cli-runtime/artifacts/openapi/swagger.json @@ -6269,7 +6269,7 @@ "description": "EndpointPort is a tuple that describes a single port.", "properties": { "appProtocol": { - "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and http://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol. This is a beta field that is guarded by the ServiceAppProtocol feature gate and enabled by default.", + "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol. This is a beta field that is guarded by the ServiceAppProtocol feature gate and enabled by default.", "type": "string" }, "name": { @@ -10300,7 +10300,7 @@ "description": "ServicePort contains information on service's port.", "properties": { "appProtocol": { - "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and http://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol. This is a beta field that is guarded by the ServiceAppProtocol feature gate and enabled by default.", + "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol. This is a beta field that is guarded by the ServiceAppProtocol feature gate and enabled by default.", "type": "string" }, "name": { @@ -11034,7 +11034,7 @@ "description": "EndpointPort represents a Port used by an EndpointSlice", "properties": { "appProtocol": { - "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and http://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", + "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", "type": "string" }, "name": { diff --git a/staging/src/k8s.io/kubectl/testdata/openapi/swagger.json b/staging/src/k8s.io/kubectl/testdata/openapi/swagger.json index 3f170551ec9..3bf6fd8caf3 100644 --- a/staging/src/k8s.io/kubectl/testdata/openapi/swagger.json +++ b/staging/src/k8s.io/kubectl/testdata/openapi/swagger.json @@ -6269,7 +6269,7 @@ "description": "EndpointPort is a tuple that describes a single port.", "properties": { "appProtocol": { - "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and http://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol. This is a beta field that is guarded by the ServiceAppProtocol feature gate and enabled by default.", + "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol. This is a beta field that is guarded by the ServiceAppProtocol feature gate and enabled by default.", "type": "string" }, "name": { @@ -10300,7 +10300,7 @@ "description": "ServicePort contains information on service's port.", "properties": { "appProtocol": { - "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and http://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol. This is a beta field that is guarded by the ServiceAppProtocol feature gate and enabled by default.", + "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol. This is a beta field that is guarded by the ServiceAppProtocol feature gate and enabled by default.", "type": "string" }, "name": { @@ -11034,7 +11034,7 @@ "description": "EndpointPort represents a Port used by an EndpointSlice", "properties": { "appProtocol": { - "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and http://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", + "description": "The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.", "type": "string" }, "name": {