The node.yaml has some logic that will be also used by the kubernetes
master on trusty work (issue #16702). This change moves the code
shared by the master and node configuration to a separate script, and
the master and node configuration can source it to use the code.
Moreover, this change stages the script for GKE use.
This scopes down the initially ambitious PR:
https://github.com/kubernetes/kubernetes/pull/14960 to replace just
`pause` and `fluentd-elasticsearch` to come through `beta.gcr.io`.
The v2 versions have been pushed under new tags, `pause:2.0` and
`fluentd-elastisearch:1.12`.
NOTE: `beta.gcr.io` will still serve images using v1 until they are repushed with v2. Pulls through `gcr.io` will still work after pushing through `beta.gcr.io`, but will be served over v1 (via compat logic).
This registry can be accessed through proxies that run on each node
listening on port 5000. We send the proxy images to the nodes directly
to avoid requests that hit the network during cluster launch. For now,
we continue to pull the registry itself over the network, especially
given its large size (we should be able to dramatically shrink the
image). On GCE we create a PD and use that for storage, otherwise we
use an emptyDir. The registry is not enabled outside of GCE. All
communication is currently plain HTTP. In order to use SSL, we will
need to be able to request a certificate/key from the apiserver signed
by the apiserver's CA cert.
Some versions of docker display image listings like this:
docker.io/golang 1.4 ebd45caf377c 2 weeks ago
The regular expression used to detect presence of images
needs to be updated. It's unfortunate that we're still
screen-scaping here, due to:
https://github.com/docker/docker/issues/8048
This commit does 4 things:
* Adds a script which will: (a) clone from a git tag, make release,
and give you very detailed instructions as to what to do from that
point.
* Changes `push-official-release.sh` so we can't push "dirty"
releases anymore (which `build-official-release.sh` also double
checks at the end.)
* Fixes#9576 by ensuring a correct umask.
* Changes common.sh to gtar all the way through, to ensure that
bloody OS X tar never touches the release process, because I don't
want to have to understand two tar programs and how release
artifacts are created from both (c.f. #10615.)
This commit does 4 things:
* Adds a script which will: (a) clone from a git tag, make release,
and give you very detailed instructions as to what to do from that
point.
* Changes `push-official-release.sh` so we can't push "dirty"
releases anymore (which `build-official-release.sh` also double
checks at the end.)
* Fixes#9576 by ensuring a correct umask.
* Changes common.sh to gtar all the way through, to ensure that
bloody OS X tar never touches the release process, because I don't
want to have to understand two tar programs and how release
artifacts are created from both (c.f. #10615.)
Slightly neuters #8955, but we haven't had a build succeed in a while
for whatever reason. (I checked on Jenkins and the images in the build
log where deletion was attempted were actually deleted, so I think
this is primarily an exit code / API issue of some sort.)
Also by pre-staging and pushing all at once, and by doing the ACL
modify in parallel, this shaves the push time down anyways, despite
the extra I/O.
Along the way: Updates to longer hashes ala #6615
Rework the parallel docker build path to create separate docker build
directories for each binary, rather than just separate files,
eliminating the use of "-f Dockerfile.foo". (I think this also shaves
a little more time off, because it was previously sending the whole
dir each time to the docker daemon.)
Also some minor cleanup.
Fixes#6463
Adds a kube::release::gcs::publish_latest_official that checks the
current contents of this file in GCS, verifies that we're pushing a
newer build, and updates it if so. (i.e. it handles the case of
pushing a 0.13.1 and then later pushing a 0.12.3.) This follows the
pattern of the ci/ build, which Jenkins just updates unconditionally.
I already updated the file for 0.13.1. After this we can update the
get-k8s script, so we don't have to keep updating it.
Change provisioning to pass all variables to both master and node. Run
Salt in a masterless setup on all nodes ala
http://docs.saltstack.com/en/latest/topics/tutorials/quickstart.html,
which involves ensuring Salt daemon is NOT running after install. Kill
Salt master install. And fix push to actually work in this new flow.
As part of this, the GCE Salt config no longer has access to the Salt
mine, which is primarily obnoxious for two reasons: - The minions
can't use Salt to see the master: this is easily fixed by static
config. - The master can't see the list of all the minions: this is
fixed temporarily by static config in util.sh, but later, by other
means (see
https://github.com/GoogleCloudPlatform/kubernetes/issues/156, which
should eventually remove this direction).
As part of it, flatten all of cluster/gce/templates/* into
configure-vm.sh, using a single, separate piece of YAML to drive the
environment variables, rather than constantly rewriting the startup
script.
The build is only looking for GNU tar as gtar on OSX, which is the name used when installed using brew. Macports installs it as gnutar, so check for that name if gtar is not found.
This implements phase 1 of the proposal in #3579, moving the creation
of the pods, RCs, and services to the master after the apiserver is
available.
This is such a wide commit because our existing initial config story
is special:
* Add kube-addons service and associated salt configuration:
** We configure /etc/kubernetes/addons to be a directory of objects
that are appropriately configured for the current cluster.
** "/etc/init.d/kube-addons start" slurps up everything in that dir.
(Most of the difficult is the business logic in salt around getting
that directory built at all.)
** We cheat and overlay cluster/addons into saltbase/salt/kube-addons
as config files for the kube-addons meta-service.
* Change .yaml.in files to salt templates
* Rename {setup,teardown}-{monitoring,logging} to
{setup,teardown}-{monitoring,logging}-firewall to properly reflect
their real purpose now (the purpose of these functions is now ONLY to
bring up the firewall rules, and possibly to relay the IP to the user).
* Rework GCE {setup,teardown}-{monitoring,logging}-firewall: Both
functions were improperly configuring global rules, yet used
lifecycles tied to the cluster. Use $NODE_INSTANCE_PREFIX with the
rule. The logging rule needed a $NETWORK specifier. The monitoring
rule tried gcloud describe first, but given the instancing, this feels
like a waste of time now.
* Plumb ENABLE_CLUSTER_MONITORING, ENABLE_CLUSTER_LOGGING,
ELASTICSEARCH_LOGGING_REPLICAS and DNS_REPLICAS down to the master,
since these are needed there now.
(Desperately want just a yaml or json file we can share between
providers that has all this crap. Maybe #3525 is an answer?)
Huge caveats: I've gone pretty firm testing on GCE, including
twiddling the env variables and making sure the objects I expect to
come up, come up. I've tested that it doesn't break GKE bringup
somehow. But I haven't had a chance to test the other providers.
This pushes artifacts in a similar manner to the official release,
except that instead of release/vFOO, it goes to ci/$(git describe),
e.g.: gs://kubernetes-release/ci/v0.7.0-315-gcae5722
It also pushes a text file to gs://kubernetes-release/ci/latest.txt,
so anyone can do, for instance:
gsutil ls gs://kubernetes-release/ci/$(gsutil cat gs://kubernetes-release/ci/latest.txt)
(In a parallel change, I'm going to flip the jenkins scripts over to
use git describe, since it's shorter and a little more descriptive)
Add test artifacts to the build. This lets you do:
tar -xzf kubernetes.tar.gz
tar -xzf kubernetes-test.tar.gz
cd kubernetes
go run ./hack/e2e.go -up -test -down
without having a git checkout.
This commit brings two main changes, notably:
Two new options that can be set as environment variables
- DOCKER_OPTS: any arbitrary set of docker options. Example: --tlsverify
- DOCKER_NATIVE: This forces the use of the native docker available.
This is most useful if you're on OS X and do not want
to use boot2docker.
Now uses 'docker cp' instead of tar piping to transfer files. This
currently must be done by copying the binaries off of the docker volume
and into a local filesystem (/tmp) before a docker cp is done. This
workaround will no longer be necessary after bug fix
https://github.com/docker/docker/pull/8509 makes it into stable.
This was necessary because the tar | tar method was creating corrupted
archives on OS X even with the < /dev/null workaround.
apiserver becomes kube-apiserver
controller-manager -> kube-controller-manager
scheduler and proxy similarly.
Only thing I promise is that right now hack/build-go.sh and
build/release.sh exit with 0. That's it. Who knows if any of this
actually works....
If the failure is a problem, the build will fail later. But it is
possible that this is not a fatal issue and we should let things go
forward. (a filesystem mounted with context=something in permissive
would cause chcon to fail, but the build to work)
* Rewrite a bunch of the hack/ directory with modular reusable bash libraries.
* Have 'build/*' build on 'hack/*'. The stuff in build now just runs hack/* in a docker container.
* Use a docker data container to enable faster incremental builds.
* Standardize output to _output/{local,dockerized}/bin/OS/ARCH/*. This regularized placement makes cross compilation work.
* Move travis specific scripts under hack/travis
With new dockerized incremental builds, I can do a no-op `make quick-release` in ~30s. This is a significant improvement.
If you have two repos that are both building at the same time we don't want to have them stomp on each other as they deal with docker. Work around this by hashing the KUBE_ROOT and mixing that in to the name.
Also a bunch of script clean up. Make make-clean.sh faster and more robust.
Building the docker run images and uploading to GCS are now optional and turned off by default. Doing a release shouldn't hit the network now (I think).
