Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Add configuration item to allow kubeadm join to use a dns name pointing to control plane
This adds a new flag (`--apiserver-advertise-dns-address`) to kubeadm which is used in node kubelet.confg to point to API server allowing users to define a DNS entry instead of an IP address.
Fixeskubernetes/kubeadm#411
```release-note
Adds new flag `--apiserver-advertise-dns-address` which is used in node kubelet.confg to point to API server
```
// @timothysc @craigtracey
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Update bazelbuild/rules_go, kubernetes/repo-infra, and gazelle dependencies
**What this PR does / why we need it**: updates our bazelbuild/rules_go dependency in order to bump everything to go1.9.4. I'm separating this effort into two separate PRs, since updating rules_go requires a large cleanup, removing an attribute from most build rules.
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 59767, 56454, 59237, 59730, 55479). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
kubeadm: add configuration option to not taint master
**What this PR does / why we need it**:
Although tainting the master is normally a good and proper thing to do in some situations (docker for mac in our case, but I suppose minikube and such as well) having a single host configuration is desirable.
In linuxkit we have a [workaround](443e47c408/projects/kubernetes/kubernetes/kubeadm-init.sh (L19...L22)) to remove the taint after initialisation. With the change here we could simply populate `/etc/kubeadm/kubeadm.yaml` with `noTaintMaster: true` instead and have it never be tainted in the first place.
I have only added this to the config file and not to the CLI since AIUI the latter is somewhat deprecated.
The code also arranges to _remove_ an existing taint if it is unwanted. I'm unsure if this behaviour is correct or desirable, I think a reasonable argument could be made for leaving an existing taint in place too.
Signed-off-by: Ian Campbell <ijc@docker.com>
**Release note**:
Since the requirement for this option is rather niche and not best practice in the majority of cases I'm not sure if it warrants mentioning in the release notes? If it were then perhaps
```release-note
`kubeadm init` can now omit the tainting of the master node if configured to do so in `kubeadm.yaml`.
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Feature Gate - Kubeadm Audit Logging
Fixeskubernetes/kubeadm#623
Signed-off-by: Chuck Ha <ha.chuck@gmail.com>
**What this PR does / why we need it**:
This PR enables [Auditing](https://kubernetes.io/docs/tasks/debug-application-cluster/audit/) behind a featureGate. A user can supply their own audit policy with configuration option as well as a place for the audit logs to live. If no policy is supplied a default policy will be provided. The default policy will log all Metadata level policy logs. It is the example provided in the documentation.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixeskubernetes/kubeadm#623
**Special notes for your reviewer**:
**Release note**:
```release-note
kubeadm: Enable auditing behind a feature gate.
```
Although tainting the master is normally a good and proper thing to do in some
situations (docker for mac in our case, but I suppose minikube and such as
well) having a single host configuration is desirable.
In linuxkit we have a [workaround](443e47c408/projects/kubernetes/kubernetes/kubeadm-init.sh (L19...L22))
to remove the taint after initialisation. With the change here we could simply
populate /etc/kubeadm/kubeadm.yaml` with `noTaintMaster: true` instead and have
it never be tainted in the first place.
I have only added this to the config file and not to the CLI since AIUI the
latter is somewhat deprecated.
The code also arranges to _remove_ an existing taint if it is unwanted. I'm
unsure if this behaviour is correct or desirable, I think a reasonable argument
could be made for leaving an existing taint in place too.
Signed-off-by: Ian Campbell <ijc@docker.com>
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
kubeadm: imagePullPolicy option in init config
**What this PR does / why we need it**:
This PR adds `imagePullPolicy` option to the `kubeadm init` configuration file.
The new `imagePullPolicy` option is forwarded to the generated kubelet static pods for etcd, kube-apiserver, kube-controller-manager and kube-scheduler. This option allows for precise image pull policy specification for master nodes and thus for more tight control over images. It is useful in CI environments and in environments, where the user has total control over master VM templates (thus, the master VM templates can be preloaded with the required Docker images for the control plane services).
**Special notes for your reviewer**:
/cc @kubernetes/sig-cluster-lifecycle-pr-reviews
/area kubeadm
/assign @luxas
**Release note**:
```release-note
kubeadm: New "imagePullPolicy" option in the init configuration file, that gets forwarded to kubelet static pods to control pull policy for etcd and control plane images.
```
Audit logs are configurable via the MasterConfiguration file.
All options are ignored unless the FeatureGate is enabled.
Fixeskubernetes/kubeadm#623
Signed-off-by: Chuck Ha <ha.chuck@gmail.com>
Automatic merge from submit-queue (batch tested with PRs 59344, 59595, 59598). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Fix kubeadm typo
**What this PR does / why we need it**:
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
```
Automatic merge from submit-queue (batch tested with PRs 57824, 58806, 59410, 59280). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
2nd try at using a vanity GCR name
The 2nd commit here is the changes relative to the reverted PR. Please focus review attention on that.
This is the 2nd attempt. The previous try (#57573) was reverted while we
figured out the regional mirrors (oops).
New plan: k8s.gcr.io is a read-only facade that auto-detects your source
region (us, eu, or asia for now) and pulls from the closest. To publish
an image, push k8s-staging.gcr.io and it will be synced to the regionals
automatically (similar to today). For now the staging is an alias to
gcr.io/google_containers (the legacy URL).
When we move off of google-owned projects (working on it), then we just
do a one-time sync, and change the google-internal config, and nobody
outside should notice.
We can, in parallel, change the auto-sync into a manual sync - send a PR
to "promote" something from staging, and a bot activates it. Nice and
visible, easy to keep track of.
xref https://github.com/kubernetes/release/issues/281
TL;DR:
* The new `staging-k8s.gcr.io` is where we push images. It is literally an alias to `gcr.io/google_containers` (the existing repo) and is hosted in the US.
* The contents of `staging-k8s.gcr.io` are automatically synced to `{asia,eu,us)-k8s.gcr.io`.
* The new `k8s.gcr.io` will be a read-only alias to whichever regional repo is closest to you.
* In the future, images will be promoted from `staging` to regional "prod" more explicitly and auditably.
```release-note
Use "k8s.gcr.io" for pulling container images rather than "gcr.io/google_containers". Images are already synced, so this should not impact anyone materially.
Documentation and tools should all convert to the new name. Users should take note of this in case they see this new name in the system.
```
This is the 2nd attempt. The previous was reverted while we figured out
the regional mirrors (oops).
New plan: k8s.gcr.io is a read-only facade that auto-detects your source
region (us, eu, or asia for now) and pulls from the closest. To publish
an image, push k8s-staging.gcr.io and it will be synced to the regionals
automatically (similar to today). For now the staging is an alias to
gcr.io/google_containers (the legacy URL).
When we move off of google-owned projects (working on it), then we just
do a one-time sync, and change the google-internal config, and nobody
outside should notice.
We can, in parallel, change the auto-sync into a manual sync - send a PR
to "promote" something from staging, and a bot activates it. Nice and
visible, easy to keep track of.
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Update kubeadm supported etcd version to 3.2.14 in 1.10
**What this PR does / why we need it**:
Kubernetes will upgrade to etcd server 3.2.14 in 1.10 cycle (#58645), update DefaultEtcdVersion in kubeadm to this version.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
relevant PR: #57480#58645
fixes: https://github.com/kubernetes/kubeadm/issues/621
**Special notes for your reviewer**:
/cc @kubernetes/sig-cluster-lifecycle-pr-reviews
**Release note**:
```release-note
NONE
```
kubeadm don't need to advertise this in release notes.
With IPv4, the node CIDR prefix is set to /24, which gives 256 pods per node
and 256 nodes, when assuming a /16 is used for the pod subnet.
For IPv6, the node CIDR prefix, is hard coded to /64. This does not work,
because currently the pod subnet prefix must be /66 or higher and must be a
larger subnet (lower value) than the node CIDR prefix.
In addition, the bit mask used to track the subnets (implying the number of
nodes), can only handle 64K entries, so the difference between pod subnet
prefix and node CIDR prefix cannot be more than 16 (bits). The node CIDR
value needs to support this restriction.
To address this, the following algorithm is proposed...
For pod subnet prefixes of /113 or smaller, the remaining bits will be used
for the node CIDR, in multiples of 8, and 9-16 bits will be reserved for the
nodes, so that there are 512-64K nodes and 256, 512, 768, ... pods/node.
For example, with a pod network of /111, there will be 17 bits available. This
would give 8 bits for pods per node and 9 bits for nodes. The node CIDR would
be /120. For a pod network of /104, there will be 24 bits available. There will
be 8 bits for nodes, and 16 bits for pods/node, using a /112 node CIDR.
If the pod subnet prefix is /112, then the node CIDR will be set to /120, and
256 nodes and 256 pods/node will be available.
If the subnet prefix is /113 to /128, we don't have enough bits and will set
the node CIDR prefix to be the same as the pod subnet prefix. This will cause
a falure later, when it tests that the pod subnet prefix is larger than the
node CIDR prefix.
Automatic merge from submit-queue (batch tested with PRs 53895, 58013, 58466, 58531, 58535). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
[kubeadm] Bump kube-dns to 1.14.8
**What this PR does / why we need it**:
Bump kube-dns to 1.14.8 for kubeadm. Ref https://github.com/kubernetes/kubernetes/pull/57918.
cc @rramkumar1
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes #NONE
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Kubeadm: clean up MarshalToYamlForCodecs
Proxy will use PrintBytesWithLinePrefix to indent.
**What this PR does / why we need it**:
This removed the function MarshalToYamlForCodecsWithShift() and the proxy
code will use PrintBytesWithLinePrefix() to shift over the yaml lines.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes#57907
**Special notes for your reviewer**:
**Release note**:
```release-note-none
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Enable privileged containers for apiserver and controller
**What this PR does / why we need it**:
In OpenStack environment, when there is no metadata service, we
look at the config drive to figure out the metadata. Since we need
to run commands like blkid, we need to ensure that api server and
kube controller are running in the privileged mode.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes#47392
Fixes https://github.com/kubernetes/kubeadm/issues/588
**Special notes for your reviewer**:
**Release note**:
```release-note
Fix issue when using OpenStack config drive for node metadata
```
In OpenStack environment, when there is no metadata service, we
look at the config drive to figure out the metadata. Since we need
to run commands like blkid, we need to ensure that api server and
kube controller are running in the privileged mode.
So add a new field in MasterConfiguration for specifying that the
api server and controller manager (s) need extra privileges. Added
a TODO to remove this code when we fully yank out cloud provider
specific calls from these processes.
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
fix some bad url
**What this PR does / why we need it**:
fix some bad url
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Enable ValidatingAdmissionWebhook and MutatingAdmissionWebhook in kubeadm from v1.9
**What this PR does / why we need it**:
Since 1.9, `ValidatingAdmissionWebhook` and `MutatingAdmissionWebhook` are beta. Kubeadm should enable them by default.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixeskubernetes/kubeadm#642
**Special notes for your reviewer**:
/assign @luxas
/cc @kubernetes/sig-cluster-lifecycle-pr-reviews
**Release note**:
```release-note
Enable ValidatingAdmissionWebhook and MutatingAdmissionWebhook in kubeadm from v1.9
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Print the full path of Kubeconfig files.
**What this PR does / why we need it**:
kubeadm init:
```
[kubeconfig] Wrote KubeConfig file to disk: "admin.conf"
[kubeconfig] Wrote KubeConfig file to disk: "kubelet.conf"
[kubeconfig] Wrote KubeConfig file to disk: "controller-manager.conf"
[kubeconfig] Wrote KubeConfig file to disk: "scheduler.conf"
```
It'd be good to print the path of the KubeConfig files in case users want to view the content of these files.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes https://github.com/kubernetes/kubeadm/issues/656
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Fix `kubeadm upgrade` error while CoreDNS is installed
**What this PR does / why we need it**:
In the scenario when I have CoreDNS installed via `kubeadm init` and I want to continue using CoreDNS after `kubeadm upgrade`, the upgrade is unsuccessful and it gives an error.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixeskubernetes/kubeadm#641
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Move scheduler out of plugin directory
**What this PR does / why we need it**:
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
This is but one step toward resolving the referenced issue.
/ref #57579
**Special notes for your reviewer**:
**Release note**:
```release-note
Default scheduler code is moved out of the plugin directory.
plugin/pkg/scheduler -> pkg/scheduler
plugin/cmd/kube-scheduler -> cmd/kube-scheduler
```
/sig scheduling
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
kubeadm: set kube-apiserver advertise address using downward API
**What this PR does / why we need it**:
Sets kube-apiserver --advertise-address using downward API for self-hosted Kubernetes with kubeadm.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes # https://github.com/kubernetes/kubeadm/issues/400
**Special notes for your reviewer**:
@luxas mentioned something about losing the ability to customize advertise address via kubeadm, didn't really take that into consideration yet but I can definitely make the necessary changes if needed.
**Release note**:
```release-note
kubeadm: set kube-apiserver advertise address using downward API
```
This moves plugin/pkg/scheduler to pkg/scheduler and
plugin/cmd/kube-scheduler to cmd/kube-scheduler.
Bulk of the work was done with gomvpkg, except for kube-scheduler main
package.
