Automatic merge from submit-queue
Begin paths for internationalization in kubectl
This is just the first step, purposely simple so we can get the interface correct.
@kubernetes/sig-cli @deads2k
Automatic merge from submit-queue
Fix cloud-config name in test case
**What this PR does / why we need it**: fixes default cloud-config name in test cases for reset.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: related to kubernetes/kubeadm#75
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
use bytes.Buffer instead of append for error string concat
**What this PR does / why we need it**:
1. in my benchmark test, `bytes.Buffer` takes much less time ( about 1:1000 ) than string append( `+=` ).
>BenchmarkAppendConcat-4 100000 151438 ns/op 578181 B/op 2 allocs/op
BenchmarkBufferSprintf-4 3000000 487 ns/op 65 B/op 3 allocs/op
BenchmarkBufferConcat-4 5000000 271 ns/op 47 B/op 1 allocs/op
the benchmark codes is here https://play.golang.org/p/LS52zGuwZN
2. in our `RunInitMasterChecks`, `RunJoinNodeChecks` there are lots of preflight checks. they may result in a huge error message. so `bytes.Buffer` can bring considerable performance enhancement in the worst of conditions.
beyond that, this PR
1. fix an exported struct comment,
1. and use `found = append( found, errs...)` instead of for loop for simplicity.
Signed-off-by: bruceauyeung <ouyang.qinhua@zte.com.cn>
Automatic merge from submit-queue (batch tested with PRs 39093, 34273)
start breaking up controller manager into two pieces
This PR addresses: https://github.com/kubernetes/features/issues/88
This commit starts breaking the controller manager into two pieces, namely,
1. cloudprovider dependent piece
2. coudprovider agnostic piece
the controller manager has the following control loops -
- nodeController
- volumeController
- routeController
- serviceController
- replicationController
- endpointController
- resourceQuotaController
- namespaceController
- deploymentController
etc..
among the above controller loops,
- nodeController
- volumeController
- routeController
- serviceController
are cloud provider dependent. As kubernetes has evolved tremendously, it has become difficult
for different cloudproviders (currently 8), to make changes and iterate quickly. Moreover, the
cloudproviders are constrained by the kubernetes build/release lifecycle. This commit is the first
step in moving towards a kubernetes code base where cloud providers specific code will move out of
the core repository, and will be maintained by the cloud providers themselves.
I have added a new cloud provider called "external", which signals the controller-manager that
cloud provider specific loops are being run by another controller. I have added these changes in such
a way that the existing cloud providers are not affected. This change is completely backwards compatible, and does not require any changes to the way kubernetes is run today.
Finally, along with the controller-manager, the kubelet also has cloud-provider specific code, and that will be addressed in a different commit/issue.
@alena1108 @ibuildthecloud @thockin @dchen1107
**Special notes for your reviewer**:
@thockin - Im making this **WIP** PR to ensure that I don't stray too far from everyone's view of how we should make this change. As you can see, only one controller, namely `nodecontroller` can be disabled with the `--cloudprovider=external` flag at the moment. I'm working on cleaning up the `rancher-controller-manger` that I wrote to test this.
Secondly, I'd like to use this PR to address cloudprovider specific code in kubelet and api-server.
**Kubelet**
Kubelet uses provider specific code for node registration and for checking node-status. I thought of two ways to divide the kubelet:
- We could start a cloud provider specific kubelet on each host as a part of kubernetes, and this cloud-specific-kubelet does node registration and node-status checks.
- Create a kubelet plugin for each provider, which will be started by kubelet as a long running service. This plugin can be packaged as a binary.
I'm leaning towards the first option. That way, kubelet does not have to manage another process, and we can offload the process management of the cloud-provider-specific-kubelet to something like systemd.
@dchen1107 @thockin what do you think?
**Kube-apiserver**
Kube-apiserver uses provider specific code for distributing ssh keys to all the nodes of a cluster. Do you have any suggestions about how to address this?
**Release note**:
``` release-note
```
Automatic merge from submit-queue
kubeadm: Default to using token discovery.
Recent changes to support multiple methods for discovery meant that
"kubeadm init" no longer was sufficient and users would need to add
"--discovery token://" to achieve the same results.
Instead lets assume discovery if the user does not specify anything else
to maintain parity and the brevity of our original instructions.
**Release note**:
```release-note
NONE
```
CC @mikedanese @luxas
Automatic merge from submit-queue
Fix skipping - protobuf fields
**What this PR does / why we need it**: fixes the protobuf generator to skip fields with a protobuf tag of `"-"`
Match changes in https://github.com/kubernetes/gengo/pull/19
I couldn't get godeps to work to vendor this change in from gengo, so I made the same edits manually in cmd/libs/go2idl. A task for another day...
@smarterclayton
Automatic merge from submit-queue (batch tested with PRs 39006, 39078, 37188, 39118)
Cleanup dns
* Remove hostname endpoints annotation (was beta feature)
* Remove references to non-client-go API
* Replaces references to internal kubernetes API with client-go.
Recent changes to support multiple methods for discovery meant that
"kubeadm init" no longer was sufficient and users would need to add
"--discovery token://" to achieve the same results.
Instead lets assume discovery if the user does not specify anything else
to maintain parity and the brevity of our original instructions.
Automatic merge from submit-queue
remove unneeded authenticator dependencies from genericapiserver
Refactors the authenticator options to remove unneeded dependencies.
@sttts
Automatic merge from submit-queue
Implement kubeadm bootstrap token management
Creates bootstrap tokens as secrets per the specification in #30707
_WARNING_: These are not currently hooked up to the discovery service or the token it creates.
Still TODO:
- [x] delete tokens
- [x] merge with #35144 and adopt it's testing approach
- [x] determine if we want wholesale json output & templating like kubectl (we do not have an API object with the data we want here) may require a bit of plumbing.
- [x] allow specifying a token duration on the CLI
- [x] allow configuring the default token duration
- [x] hook up the initial token created during init
Sample output:
```
(root@centos1 ~) $ kubeadm token create
Running pre-flight checks
<cmd/token> Token secret created: f6dc69.c43e491752c4a0fd
(root@centos1 ~) $ kubeadm token create
Running pre-flight checks
<cmd/token> Token secret created: 8fad2f.e7b78c8a5f7c7b9a
(root@centos1 ~) $ kubeadm token list
Running pre-flight checks
ID TOKEN EXPIRATION
44d805 44d805.a4e78b6cf6435e33 23h
4f65bb 4f65bb.d006a3c7a0e428c9 23h
6a086e 6a086e.2ff99f0823236b5b 23h
8fad2f 8fad2f.e7b78c8a5f7c7b9a 23h
f6dc69 f6dc69.c43e491752c4a0fd 23h
f81653 f81653.9ab82a2926c7e985 23h
```
Adds kubeadm subcommands to create, list, and delete bootstrap tokens.
Tokens can be created with a TTL duration, or 0 for tokens that will not
expire. The create command can also be used to specify your own token
(for use when bootstrapping masters and nodes in parallel), or update an
existing token's secret or ttl.
Marked "ex" for experimental for now as the boostrap controllers are not
yet hooked up in core.
- move rest handler into handlers package
- move errors into handlers/errors package
- move negotation code into handlers/negotation package
- move http response writer helpers into handlers/responsewriter package
- split up pkg/apiserver/apiserver.go
Note: this is only an intermediate step towards a proper genericapiserver
package hierarchy.
Automatic merge from submit-queue
conversion-gen: add --skip-unsafe flag
We should expose the SkipUnsafe option, for legacy compatability, so
that conversion-go can be used in other projects, and for platforms
where unsafe is not available.
Make unsafe code generation the default though, and have the help text
hint that the resulting code is sub-optimal.
Automatic merge from submit-queue
path.Clean paths in GlobalEnvParams and remove unnecessary path.Join
**What this PR does / why we need it**:
1. clean all paths in `GlobalEnvParams`
1. remove unnecessary path.Join call in `pki.go`
2. fix some typos and comment errors
Signed-off-by: bruceauyeung <ouyang.qinhua@zte.com.cn>
Automatic merge from submit-queue
use in-cluster kubeconfig for genericapiserver
Allow the use of the in-cluster config to communicate with the core API server for delegated authn/authz for an addon API server.
@kubernetes/sig-api-machinery @sttts
Automatic merge from submit-queue
genericapiserver: turn APIContainer.SecretRoutes into a real ServeMux
The secret routes `Mux` is actually a `http.ServeMux` and we are type-casting to it. For downstream we want to wrap it into a restful container which also needs a real `http.ServeMux`.
