github/kubernetes
1
0
Fork 0
mirror of https://github.com/k3s-io/kubernetes.git synced 2025-10-07 02:56:03 +00:00
Code Issues Projects Releases Wiki Activity
8,783 Commits 42 Branches 8,159 Tags
30dd30802b56fc58aae2cf1f59b51a96cbf23f67
Commit Graph

952 Commits

Author SHA1 Message Date
Satnam Singh
bb2c3037e0 Revert "Actually update binaries during kube-push" 2015-03-12 17:09:50 -07:00
Satnam Singh
c3951d7cf6 Merge pull request #5415 from zmerlynn/fix_binary_push 
Actually update binaries during kube-push
 2015-03-12 16:51:28 -07:00
Zach Loafman
b02188b7d8 Actually update binaries during kube-push 
This was a dumb mistake during a re-factor of configure-vm. I tested
this early, re-factored the tail of this file, spot checked kube-push
and failed to test kube-push properly. My bad.

Fixes #5361. Fixes #5408.
 2015-03-12 16:44:32 -07:00
Charles Butler
ea0978f4f2 Adds JUJU to the Kubernetes Provider listing 
This feature adds Juju provisioning to the kube-up script. It currently
parses out the pre-requisits on debian/ubuntu based systems and installs
them if they are missing.

From there we followed the integration path that was found in the
libvirt-coreos path, implementing the methods found in the boilerplate
and calling juju service calls. There are a few "arbitrary sleeps" in
the code to allow the cloud provider to settle and properly deploy.
These are work-around cases from the script executing faster than juju
was able to communicate from the state server to subsequent nodes. I
left comments inline at these points.

To exercise this:

    export KUBERNETES_PROVIDER=juju
    cluster/kube-up.sh

It will spin up a ref arch with 1 Kubernetes Master, 2 minions, and run
the cluster validation checks against the deployment. Bridging the gap
between the juju specific bits and the upstream recommended guides for
getting started with Juju.

To note, if you do not have a "current environment" set in Juju, it will
spin up the quickstart integration wizard in interactive mode, allowing
you to configure juju, and add the proper provider/use it. Otherwise it
assumes you're in the provider you wish to use, and will deploy there.
 2015-03-12 19:34:03 -04:00
Eric Tune
2255e6f757 Fix ubuntu-cluster to use apiserver not etcd. 2015-03-12 15:10:08 -07:00
Brendan Burns
5d9fe6212c Add MASTER_IP_RANGE to e2e. 2015-03-12 14:22:03 -07:00
Zach Loafman
9fc5262c14 Infer KUBERNETES_MASTER from hostname rather than requiring it to be explicit 
This allows GKE to have the same YAML on both the master and nodes
 2015-03-12 11:51:21 -07:00
Satnam Singh
4420e0452e Merge pull request #5391 from justinsb/aws_options_doc 
Initial WIP on documenting options for AWS clusters
 2015-03-12 11:42:19 -07:00
Satnam Singh
e16bcceceb Merge pull request #5390 from brendandburns/shell_sucks 
Configure docker on the master like we do on workers.
 2015-03-12 11:42:03 -07:00
Justin Santa Barbara
84314d3206 Initial WIP on documenting options for AWS clusters 
Very incomplete, but a start.
 2015-03-12 13:54:37 -04:00
Brendan Burns
17ff8fb421 Configure docker on the master like we do on workers. 2015-03-12 10:37:30 -07:00
Alex Robinson
55ed70f723 Merge pull request #5382 from justinsb/aws_image_by_region 
Choose AWS image by region
 2015-03-12 10:31:00 -07:00
Alex Robinson
bc655681fe Merge pull request #5352 from zmerlynn/conditional_disk 
Don't always run mount-master-pd
 2015-03-12 10:19:04 -07:00
Alex Robinson
4ad0ec365e Merge pull request #5378 from justinsb/aws_instance_type 
Allow the AWS instance type to be specified via MASTER_SIZE, MINION_SIZE
 2015-03-12 09:55:06 -07:00
Alex Robinson
9344934637 Merge pull request #5377 from justinsb/aws_s3_not_world_readable 
Don't make the s3 bucket world-readable (just the files)
 2015-03-12 09:52:38 -07:00
roberthbailey
d3b0c86624 Merge pull request #5380 from justinsb/clarify_aws_comment 
Clarify comment
 2015-03-12 17:43:43 +01:00
Justin Santa Barbara
70b448b5d0 Choose AWS image by region 
Also update to the latest LTS image (fewer security updates needed)
 2015-03-12 12:05:45 -04:00
Justin Santa Barbara
0330cf616a Don't make the s3 bucket world-readable (just the files) 2015-03-12 11:52:56 -04:00
Justin Santa Barbara
f71e0eeb22 Allow the AWS instance type to be specified via MASTER_SIZE, MINION_SIZE 2015-03-12 11:52:06 -04:00
Justin Santa Barbara
41ed9e4fef Clarify comment 2015-03-12 11:50:12 -04:00
Victor Marmol
c03b080328 Merge pull request #5332 from vishh/heapster_e2e 
Adding a ginkgo version of monitoring e2e test
 2015-03-12 08:37:45 -07:00
Rafał Sokołowski
871c5ddd65 Merge pull request #5368 from justinsb/allow_copy_paste_config 
Don't print a full-stop after the conf filename, it make copy&paste hard
 2015-03-12 16:24:51 +01:00
Justin Santa Barbara
c43e8b192f Don't print a full-stop after the conf filename, it make copy&paste hard 2015-03-12 11:07:44 -04:00
Piotr Szczesniak
db5fc4ff90 Added label name to kube-dns service 
It will be displayed in kubectl clusterinfo command.
 2015-03-12 13:15:35 +01:00
Zach Loafman
d4f06cea9f Don't always run mount-master-pd 2015-03-11 19:58:44 -07:00
Victor Marmol
23c9c405fb Merge pull request #5347 from vishh/cleanup_firewall 
Remove firewall rules for monitoring. Enable monitoring in other cluster providers
 2015-03-11 18:31:04 -07:00
Saad Ali
7629b616a7 Merge pull request #5348 from dchen1107/docker 
Check docker unixsocket periodically through monit. If failed, restart d...
 2015-03-11 17:42:58 -07:00
Dawn Chen
fe9e0ca5ce Check docker unixsocket periodically through monit. If failed, restart docker. 2015-03-11 17:20:03 -07:00
Vishnu Kannan
e7aca5c337 Enable heapster based cluster monitoring by default on other cluster providers, expect for GKE. 2015-03-11 23:34:04 +00:00
Vishnu Kannan
663bdb91c9 Remove monitoring firewall setup methods. Heapster anf Grafana are now accessible via the API server proxy. 2015-03-11 23:20:45 +00:00
Vishnu Kannan
425dd7e3ee Adding a heapster ginkgo e2e test. 2015-03-11 21:47:47 +00:00
Zach Loafman
018b11bc3a Retry object creation with --validate in kube-addons 
The better solution is some fence with Salt, but the actual logs
provided in the bug don't support any race condition here, plus the
ordering in the Salt configuration seems correct.

We haven't seen this again in a while, but given the results of the
situation (a borked cluster), I'm proposing a relatively simple
workaround.

Fixes #4357 (dubiously)
 2015-03-11 14:40:37 -07:00
Zach Loafman
e780592315 Merge pull request #5264 from jlowdermilk/kube-up 
Standalone kubeconfig for gce kube-up (mulligan)
 2015-03-11 11:46:45 -07:00
Eric Tune
5d31e1ab08 Merge pull request #5142 from derekwaynecarr/unify_admission_control_salt 
Unify admission control plug-ins across providers
 2015-03-11 09:31:43 -07:00
derekwaynecarr
64eca7393a Update to use yaml quote 2015-03-11 11:07:36 -04:00
derekwaynecarr
f71a91a131 Fix regression introduced when moving to standalone salt 2015-03-11 11:06:00 -04:00
derekwaynecarr
20853410bd Unify azure and aws admission control 2015-03-11 11:06:00 -04:00
derekwaynecarr
468bf1da75 Enable common set of admission controllers across salt providers 2015-03-11 11:06:00 -04:00
Kieran O'Mahony
2b05820619 Update SkyDNS version 
I had some trouble with the kubernetes docker image for SkyDNS being outdated. In my experience the version in `kubernetes/skydns:2014-12-23-001` will not behave correctly if it manages to startup before etcd, for details see skynetservices/skydns#142

 Updating to SkyDNS latest fixes this.
 2015-03-11 09:46:46 +00:00
Zach Loafman
759e82c29f Remove dep on yaml for GCE startup 
Write out "yaml" in util.sh. Dying a little. :'(

Fixes #5258
 2015-03-10 16:38:52 -07:00
Zach Loafman
7333d991fb Revert "Fix need for yaml in GCE kube-up by importing PyYAML into third_party" 2015-03-10 15:42:28 -07:00
Jeff Lowdermilk
7db006ab1a Generate standalone kubeconfig on kube-up, clear on kube-down. 
Also tweaked the ginkgo tests to pull auth directly from a kubeconfig file
instead of the legacy kubernetes_auth file.
 2015-03-10 14:23:34 -07:00
Zach Loafman
965f684e2f Adjust kube-env.py to use third_party PyYAML 2015-03-10 13:53:13 -07:00
Jeff Lowdermilk
7358084fd5 Utilities to create and clear kubeconfig for use by kube-up scripts 2015-03-10 13:52:04 -07:00
Brian Grant
b3d3db08ef Merge pull request #5064 from justinsb/ignore_stopped_aws_instances 
Ignore EC2 instances that are stopped
 2015-03-10 11:03:34 -07:00
Alex Robinson
6700a7f230 Merge pull request #5253 from satnam6502/fluentd 
Modify Fluentd to ES setup to pass flags
 2015-03-10 10:46:26 -07:00
Brendan Burns
00f3779c6f Merge pull request #5119 from zmerlynn/salt_drones 
Change GCE to use standalone Saltstack config
 2015-03-10 10:29:59 -07:00
Satnam Singh
3ce0ede78e Modify Fluentd to ES setup to pass flags 2015-03-10 10:11:26 -07:00
Alex Robinson
8fd33476f0 Merge pull request #5218 from satnam6502/fluentd-es 
Change Fluentd config to read from head of Docker container logs
 2015-03-10 09:57:02 -07:00
Zach Loafman
b31b633f85 One additional cleanup: Send only the master name, rather the internal 
IP address. The configure-vm script can resolve this relatively easily
on the node. This is less painful for GKE, which creates all the
resources in parallel.
 2015-03-10 09:04:29 -07:00