Automatic merge from submit-queue (batch tested with PRs 38294, 37009, 36778, 38130, 37835)
Only configure basic auth on gci if KUBE_USER and KUBE_PASSWORD are specified.
This should not change the existing flow when KUBE_USER/KUBE_PASSWORD are specified.
It makes not specifying those a valid option that means "don't turn on basic auth".
I only did it for cluster/gce/gci for now, but others should be somewhat similar.
Automatic merge from submit-queue (batch tested with PRs 38294, 37009, 36778, 38130, 37835)
fix permissions when using fsGroup
Currently, when an fsGroup is specified, the permissions of the defaultMode are not respected and all files created by the atomic writer have mode 777. This is because in `SetVolumeOwnership()` the `filepath.Walk` includes the symlinks created by the atomic writer. The symlinks have mode 777 when read from `info.Mode()`. However, when the are chmod'ed later, the chmod applies to the file the symlink points to, not the symlink itself, resulting in the wrong mode for the underlying file.
This PR skips chmod/chown for symlinks in the walk since those operations are carried out on the underlying file which will be included elsewhere in the walk.
xref https://bugzilla.redhat.com/show_bug.cgi?id=1384458
@derekwaynecarr @pmorie
Automatic merge from submit-queue (batch tested with PRs 38294, 37009, 36778, 38130, 37835)
Re-use tested ratelimiter
The ratelimiter introduced in #35583 is not working correctly when called from multiple threads
This reverts to the tested ratelimiter we were previously using to unblock 1.5 (automated revert wasn't possible)
Ref #38273
reproducing test case:
```
func TestMultiThreadedBlocking(t *testing.T) {
done := make(chan bool)
// 100 QPS, burst of 100
b := NewBucketWithRate(100, 100)
go func() {
defer close(done)
fmt.Println(time.Now(), "Waiting for 1000 (should block for ~9-10 seconds)")
b.Wait(1000)
fmt.Println(time.Now(), "Got 1000")
}()
// give the request for 1000 plenty of time to take the tokens
time.Sleep(2 * time.Second)
fmt.Println(time.Now(), "Waiting for 1 (should wait until 1000 block is refilled)")
b.Wait(1)
fmt.Println(time.Now(), "Got 1 (should happen right after the wait for 1000 completes)")
<-done
}
$ go test ./pkg/util/ratelimit/ -v -run TestMultiThreadedBlocking
=== RUN TestMultiThreadedBlocking
2016-12-07 12:15:36.222133049 -0500 EST Waiting for 1000 (should block for ~9-10 seconds)
2016-12-07 12:15:38.222797752 -0500 EST Waiting for 1 (should wait until 1000 block is refilled)
2016-12-07 12:15:38.222897951 -0500 EST Got 1 (should happen right after the wait for 1000 completes)
2016-12-07 12:15:45.223125234 -0500 EST Got 1000
```
in contrast, the same test run against juju/ratelimit:
```
go test ./pkg/util/flowcontrol/ -v -run TestMultiThreadedBlocking
=== RUN TestMultiThreadedBlocking
2016-12-07 12:32:56.796077782 -0500 EST Waiting for 1000 (should block for ~9-10 seconds)
2016-12-07 12:32:58.799159059 -0500 EST Waiting for 1 (should wait until 1000 block is refilled)
2016-12-07 12:33:05.801076002 -0500 EST Got 1000
2016-12-07 12:33:05.807510387 -0500 EST Got 1 (should happen right after the wait for 1000 completes)
--- PASS: TestMultiThreadedBlocking (9.01s)
```
Automatic merge from submit-queue (batch tested with PRs 35101, 38215, 38092)
fix informer generation
Informer generation doesn't work for informers from a different clientset. This updates the generator to generate the internal interfaces required to break the cycle.
@ncdc take a look at the last two commits.
Automatic merge from submit-queue (batch tested with PRs 35101, 38215, 38092)
auth duplicate detect
I think we should not allow people set duplicate tokens in token file or set duplicate usernames in password file. because the default action overwriting the old data may let people misunderstand.
Automatic merge from submit-queue
Disable kubernetes-discovery in local-up-cluster.sh
fix#38257
Fixes local-up-cluster until kubernetes-discovery flags are hooked up
Automatic merge from submit-queue
add default label to rbac bootstrap policy
allow people to retrieve information of bootstrap policy by label :
`kubectl get clusterroles -l key=value`
`kubectl get clusterrolebindings -l key=value`
Automatic merge from submit-queue
update local-up-cluster to allow full authentication proxying
Adds group and header information in auth proxy authenticator options for `local-up-cluster.sh`. Must have been missed in the rebase madness.
Automatic merge from submit-queue
Bump Cluster Autoscaler to 0.4.0
This is the same binary as 0.4.0-beta1, that has been tested for the last couple weeks.
@saad-ali This should be cherry-picked to 1.5 release.
```release-note
Cluster Autoscaler in version 0.4.0
```
cc: @fgrzadkowski @piosz @jszczepkowski
Automatic merge from submit-queue (batch tested with PRs 38181, 38128, 36711)
etcd2: have prefix always prepended
The prefix issue is discussed in #36290.
This is fixing etcd2 behavior separately.
**release note**:
```
etcd2: have prefix always prepended
```
Automatic merge from submit-queue (batch tested with PRs 38181, 38128, 36711)
Adding correct secret type for Ceph RBD storageclass provisioner example
StorageClass now requires provider-specific secret types, adding them to the RBD provisioning docs.
Automatic merge from submit-queue
Enable OpenAPI spec validation
Spec validation was failing on Jenkins. I am enabling it in this PR to figure out if we can get it pass. No review is necessary until all test passes.
Automatic merge from submit-queue (batch tested with PRs 38173, 38151, 38197, 38221)
test: wait for ready replica set before adopting
Reworked version of https://github.com/kubernetes/kubernetes/pull/36439 which was reverted in https://github.com/kubernetes/kubernetes/pull/38049. This PR doesn't use any of the new status API added in replica sets so it should cause no trouble with upgrade tests.
@kubernetes/deployment @smarterclayton
Automatic merge from submit-queue (batch tested with PRs 38173, 38151, 38197, 38221)
Include resource type headers in diff report
**What this PR does / why we need it**: when checking for leaked resources, we report a failure only if there were additions to the diff - we don't want resources that were deleted during the run to count as a failure.
The logic for this removes the resource type headers from the diff report, however, so it's harder to understand what leaked.
For example, in https://k8s-gubernator.appspot.com/build/kubernetes-jenkins/logs/ci-kubernetes-e2e-gke-alpha-features-release-1.5/196/, the test failure shows
```
Error: 4 leaked resources
+NAME REGION IP_ADDRESS IP_PROTOCOL TARGET
+a66878dbaad1f11e695b342010af0002 us-central1 104.198.182.83 TCP us-central1/targetPools/a66878dbaad1f11e695b342010af0002
+NAME REGION SESSION_AFFINITY BACKUP HEALTH_CHECKS
+a66878dbaad1f11e695b342010af0002 us-central1 a66878dbaad1f11e695b342010af0002
```
but the [actual diff](https://storage.googleapis.com/kubernetes-jenkins/logs/ci-kubernetes-e2e-gke-alpha-features-release-1.5/196/artifacts/gcp-resources-diff.txt) contains more information:
```
--- /workspace/_artifacts/gcp-resources-before.txt 2016-12-01 14:39:14.260049037 -0800
+++ /workspace/_artifacts/gcp-resources-after.txt 2016-12-01 14:39:14.260049037 -0800
@@ -34,8 +34 @@ [ addresses ]
-NAME REGION ADDRESS STATUS
-a03d0e020a6bc11e6855f42010af0001 us-central1 104.197.135.88 RESERVED
-a23f20a47a6a011e6829a42010af0004 us-central1 104.197.147.212 RESERVED
-a32291b51a5e611e6b73342010af0002 us-central1 104.198.171.178 RESERVED
-a3c93cf79a65811e6b7c242010af0001 us-central1 104.198.58.57 RESERVED
-a9ac5bd1ba62811e68d1142010af0004 us-central1 104.154.134.135 RESERVED
-adae4c1a7a69511e6b2df42010af0000 us-central1 104.198.182.83 RESERVED
-adb4a80caa60311e689a942010af0001 us-central1 104.154.116.195 RESERVED
+
@@ -64 +57,2 @@ [ forwarding-rules ]
-
+NAME REGION IP_ADDRESS IP_PROTOCOL TARGET
+a66878dbaad1f11e695b342010af0002 us-central1 104.198.182.83 TCP us-central1/targetPools/a66878dbaad1f11e695b342010af0002
@@ -68 +62,2 @@ [ target-pools ]
-
+NAME REGION SESSION_AFFINITY BACKUP HEALTH_CHECKS
+a66878dbaad1f11e695b342010af0002 us-central1 a66878dbaad1f11e695b342010af0002
```
This PR will include the `[ type header ]`s in the report if resources are leaked.
cc @fejta
Automatic merge from submit-queue
Fix pods/log OpenAPI/Swagger spec to return string instead of v1.Pod
log operation is part of pod and had the assumption of returning a v1.Pod. First I added the support for an operation to be able to customize its return object then add the support to pods/log operation to return an string as an object sample.
Fixes#37881
Cc @kubernetes/sig-api-machinery
