Jeff Lowdermilk
4a41a7ffe5
Merge pull request #6745 from eparis/auto-gen-markdown
...
Auto gen markdown
2015-04-13 10:00:55 -07:00
Victor Marmol
4e3b4bd10e
Merge pull request #6731 from xiang90/util-kubulet
...
pkg/kubelet: kill a TODO in util.go
2015-04-13 09:01:00 -07:00
Wojciech Tyczynski
59ab41c8f7
Merge pull request #6292 from jszczepkowski/scale-pool
...
Updating target pools on cloud nodes change.
2015-04-13 10:58:49 +02:00
Eric Paris
263dc981db
Use spf13/cobra md generation instead of doing it outselves
2015-04-12 15:03:13 -04:00
Xiang Li
cea38a2f4e
pkg/kubelet: kill a TODO in util.go
...
Move kubelet.CapabilitiesSetup to capabilities.Setup
2015-04-11 10:55:39 -07:00
Daniel Smith
66d55e0959
Merge pull request #6546 from lavalamp/fix
...
Add to controller framework; use in scheduler
2015-04-10 16:20:17 -07:00
Eric Paris
8e7d14196f
Fix printing errors from failed binary runs
...
I had the kublet die on startup and the only error was "0x401da0" Which
I assume is an address of the err.Error function. The other way to fix
this, I think, would be to use err.Error(), however that could cause
fmt.Fprintf() problems, debuging on the error message people used.
Now I get a nice clean error I can understand:
"cAdvisor.New() err = mountpoint for cpu not found"
2015-04-10 17:56:47 -04:00
Dawn Chen
c19437395b
Merge pull request #6702 from ddysher/remove-nodeinfo
...
Remove nodeinfo endpoint from kubelet
2015-04-10 14:54:16 -07:00
Daniel Smith
065a8fa454
add informational output to test
2015-04-10 14:05:07 -07:00
Tim Hockin
4a7b0eecbb
Merge pull request #5138 from justinsb/cloud_pd
...
AWS EBS volume support
2015-04-10 13:47:03 -07:00
Justin Santa Barbara
503e19e58c
Rename aws_pd -> aws_ebs
2015-04-10 13:25:44 -07:00
Justin Santa Barbara
4e176771b6
Make fetching the aws instance id optional, so we can use it on e2e
2015-04-10 13:25:43 -07:00
Justin Santa Barbara
89089900d7
Fix merge problems
2015-04-10 13:25:42 -07:00
Justin Santa Barbara
6a4153fc0a
Always create volumes in the active k8s zone
2015-04-10 13:25:42 -07:00
Justin Santa Barbara
ffadd5533a
Fix AWS region vs zone
...
We were specifying a region, but naming it as a zone in util.sh
The zone matters just as much as the region, e.g. for EBS volumes.
We also change the config to require a Zone, not a Region.
But we fallback to get the information from the metadata service.
2015-04-10 13:25:42 -07:00
Justin Santa Barbara
edf0292d4a
Add initial support for Volumes to AWS
2015-04-10 13:25:42 -07:00
Deyuan Deng
868e05ce96
Remove nodeinfo endpoint from kubelet
2015-04-10 15:47:32 -04:00
Robert Bailey
8174cef3a3
Enable pprof on the kube-proxy's healthz http server.
2015-04-10 12:05:32 -07:00
Jerzy Szczepkowski
1c042208c7
Added retrying update of balancers in case some of updates failed.
2015-04-10 16:06:56 +02:00
Jerzy Szczepkowski
eb253a694e
Updating target pools on cloud nodes change.
...
Implemented updating target pools for external services on chage of cloud nodes. Related to #5241 .
2015-04-10 16:06:56 +02:00
Timothy St. Clair
2b60111fca
Performance change to option enable client.QPS, client.Burst
...
and change default on max_requests_inflight.
2015-04-10 07:53:54 -05:00
Yifan Gu
d696ecdba5
integration: Randomize the order of the integration tests.
2015-04-09 18:39:34 -07:00
Yu-Ju Hong
faf47b6f0b
Limit the number of concurrent tests in integration.go
...
Integration test often time out because the machine is loaded. Instead of
increasing timeout, this change hopes to address the issue by limiting the
number of tests running simultaneously.
Add a new flag in integration.go to specify the maximum number of concurrent
tests. Set the default in travis and shippable configurations to be 4.
2015-04-09 16:54:23 -07:00
Victor Marmol
6836b527ab
Merge pull request #6634 from yifan-gu/pod_infra_img
...
kubelet: Move pod infra container image setting to dockertools.
2015-04-09 10:10:52 -07:00
Yifan Gu
b868f421e0
kubelet: Move pod infra container image setting to dockertools.
2015-04-09 09:53:07 -07:00
Timothy St. Clair
9177baa64c
Enable profiling by default re: #6623
2015-04-09 10:52:37 -05:00
Wojciech Tyczynski
37ea722b7b
Set NodeStatusUpdateFrequency
2015-04-09 10:44:48 +02:00
Vishnu Kannan
2b5cad6acf
Improve kubelet logging around startup. This might help detect any lockup issues during startup.
2015-04-08 21:02:15 +00:00
Prashanth Balasubramanian
62984f9bee
Fix a race in the integration tests.
2015-04-08 10:25:21 -07:00
gmarek
72182735b9
Remove Node Controllers ability to pull status from Kubelet
2015-04-08 09:44:42 +02:00
Tim Hockin
f2c8decffe
Clarify network-related flags in the master
...
Rename and rejigger flags to make it more obvious what is happening. Change
the default listen from ChooseHostInterface() to 0.0.0.0.
2015-04-07 15:55:51 -07:00
Clayton Coleman
bb137f0bba
Merge pull request #6534 from deads2k/deads-kubeconfig-cmd-factory
...
refactor to move kubectl.cmd.Factory to kubect/cmd/util
2015-04-07 17:02:20 -04:00
David Oppenheimer
d8aa57872a
Change default Kubelet NodeStatusUpdateFrequency from 2s to 10s.
2015-04-07 12:36:09 -07:00
deads2k
6344cf3c3a
refactor to move kubectl.cmd.Factory to kubect/cmd/util
2015-04-07 14:43:50 -04:00
David Oppenheimer
402bf60366
Merge pull request #6214 from gmarek/move_consts_to_flags
...
Move NodeController constants to flags
2015-04-07 11:31:11 -07:00
Huamin Chen
a278ceeb0a
implement glusterfs volume plugin
...
Signed-off-by: Huamin Chen <hchen@redhat.com >
2015-04-07 09:14:39 -04:00
gmarek
321a81047c
Move NodeController constants to flags
2015-04-07 12:33:03 +02:00
Vish Kannan
be0feddfa5
Merge pull request #5506 from rootfs/dev
...
add iscsi volume plugin
2015-04-06 15:11:44 -07:00
Rohit Jnagal
2b280629d1
Merge pull request #6483 from timothysc/kube-e2e-help
...
Minor update to add help details for e2e command
2015-04-06 14:28:02 -07:00
Victor Marmol
3facc53cee
Merge pull request #4842 from jdef/kubelet_bootstrap
...
allow for more easily customized kubelet creation and initialization
2015-04-06 14:20:44 -07:00
Timothy St. Clair
a832d290de
Minor update to add help details for e2e command
2015-04-06 15:32:13 -05:00
Huamin Chen
7a82af31de
add iscsi volume plugin
...
Signed-off-by: Huamin Chen <hchen@redhat.com >
2015-04-06 16:20:28 -04:00
Brian Grant
338a51d9c5
Merge pull request #6446 from ghodss/fix-patch-test
...
Re-enable PATCH integration test for v1beta3
2015-04-06 12:04:58 -07:00
James DeFelice
d194af6b4f
allow for more easily customized kubelet creation and initialization
2015-04-06 18:51:42 +00:00
Sam Ghods
d37f1cdfef
Fix flakey integration test due to slow endpoints controller
2015-04-05 03:33:02 -07:00
Sam Ghods
5ce15b7840
Re-enable PATCH integration test for v1beta3
2015-04-05 02:14:12 -07:00
Sam Ghods
8a62b0d9f6
Temporarily skip PATCH integration tests for v1beta3
2015-04-03 16:39:20 -07:00
Brian Grant
0d95883593
Merge pull request #6027 from ghodss/kube-patch
...
Implement Strategic Merge Patch in apiserver
2015-04-03 15:08:51 -07:00
Eric Tune
e49424785e
Merge pull request #6380 from roberthbailey/kubelet-ssl
...
Configure the kubelet to use HTTPS (take 2)
2015-04-03 13:43:00 -07:00
Sam Ghods
2c977db1b3
Implement Strategic Merge Patch in apiserver
2015-04-03 11:51:02 -07:00
