More renames to LinuxKit

Signed-off-by: Justin Cormack <justin.cormack@docker.com>

pkg/init/etc/dhcpcd.conf

@@ -1,46 +0,0 @@
-# Moby dhcpcd config
-
-# Only configure standard external ethernet
-allowinterfaces eth*
-
-# Inform the DHCP server of our hostname for DDNS.
-hostname
-
-# Use the hardware address of the interface for the Client ID.
-clientid
-# or
-# Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361.
-# Some non-RFC compliant DHCP servers do not reply with this set.
-# In this case, comment out duid and enable clientid above.
-#duid
-
-# Persist interface configuration when dhcpcd exits.
-persistent
-
-# Rapid commit support.
-# Safe to enable by default because it requires the equivalent option set
-# on the server to actually work.
-option rapid_commit
-
-# A list of options to request from the DHCP server.
-option domain_name_servers, domain_name, domain_search, host_name
-option classless_static_routes
-# Most distributions have NTP support.
-option ntp_servers
-# Respect the network MTU. This is applied to DHCP routes.
-option interface_mtu
-
-# A ServerID is required by RFC2131.
-require dhcp_server_identifier
-
-# Generate Stable Private IPv6 Addresses instead of hardware based ones
-slaac private
-
-# Do not wait
-nodelay
-
-# Do not arp to check IP
-noarp
-
-# Only fork when we have ipv4
-# waitip 4

pkg/init/etc/issue

@@ -1,5 +1,5 @@
 
-Welcome to Moby
+Welcome to LinuxKit
 
                         ##         .
                   ## ## ##        ==