mirror of
https://github.com/linuxkit/linuxkit.git
synced 2025-12-25 10:02:31 +00:00
44 lines
1.1 KiB
Plaintext
44 lines
1.1 KiB
Plaintext
# Moby dhcpcd config
|
|
|
|
# Only configure standard external ethernet
|
|
allowinterfaces eth*
|
|
|
|
# Inform the DHCP server of our hostname for DDNS.
|
|
hostname
|
|
|
|
# Use the hardware address of the interface for the Client ID.
|
|
clientid
|
|
# or
|
|
# Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361.
|
|
# Some non-RFC compliant DHCP servers do not reply with this set.
|
|
# In this case, comment out duid and enable clientid above.
|
|
#duid
|
|
|
|
# Persist interface configuration when dhcpcd exits.
|
|
persistent
|
|
|
|
# Rapid commit support.
|
|
# Safe to enable by default because it requires the equivalent option set
|
|
# on the server to actually work.
|
|
option rapid_commit
|
|
|
|
# A list of options to request from the DHCP server.
|
|
option domain_name_servers, domain_name, domain_search, host_name
|
|
option classless_static_routes
|
|
# Most distributions have NTP support.
|
|
option ntp_servers
|
|
# Respect the network MTU. This is applied to DHCP routes.
|
|
option interface_mtu
|
|
|
|
# A ServerID is required by RFC2131.
|
|
require dhcp_server_identifier
|
|
|
|
# Generate Stable Private IPv6 Addresses instead of hardware based ones
|
|
slaac private
|
|
|
|
# Do not wait
|
|
nodelay
|
|
|
|
# Do not arp to check IP
|
|
noarp
|