Bump github.com/containers/common from 0.36.0 to 0.37.0

Bumps [github.com/containers/common](https://github.com/containers/common) from 0.36.0 to 0.37.0.
- [Release notes](https://github.com/containers/common/releases)
- [Commits](https://github.com/containers/common/compare/v0.36.0...v0.37.0)

Signed-off-by: dependabot-preview[bot] <support@dependabot.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>

vendor/github.com/klauspost/compress/zstd/blockenc.go

@@ -386,9 +386,9 @@ func (b *blockEnc) encodeLits(lits []byte, raw bool) error {
 		b.output = bh.appendTo(b.output)
 		b.output = append(b.output, lits[0])
 		return nil
+	case nil:
 	default:
 		return err
-	case nil:
 	}
 	// Compressed...
 	// Now, allow reuse
@@ -528,11 +528,6 @@ func (b *blockEnc) encode(org []byte, raw, rawAllLits bool) error {
 		if debug {
 			println("Adding literals RLE")
 		}
-	default:
-		if debug {
-			println("Adding literals ERROR:", err)
-		}
-		return err
 	case nil:
 		// Compressed litLen...
 		if reUsed {
@@ -563,6 +558,11 @@ func (b *blockEnc) encode(org []byte, raw, rawAllLits bool) error {
 		if debug {
 			println("Adding literals compressed")
 		}
+	default:
+		if debug {
+			println("Adding literals ERROR:", err)
+		}
+		return err
 	}
 	// Sequence compression
 

vendor/github.com/klauspost/compress/zstd/decodeheader.go

@@ -93,7 +93,7 @@ func (h *Header) Decode(in []byte) error {
 	h.HasCheckSum = fhd&(1<<2) != 0
 
 	if fhd&(1<<3) != 0 {
-		return errors.New("Reserved bit set on frame header")
+		return errors.New("reserved bit set on frame header")
 	}
 
 	// Read Window_Descriptor
@@ -174,7 +174,7 @@ func (h *Header) Decode(in []byte) error {
 	if len(in) < 3 {
 		return nil
 	}
-	tmp, in := in[:3], in[3:]
+	tmp := in[:3]
 	bh := uint32(tmp[0]) | (uint32(tmp[1]) << 8) | (uint32(tmp[2]) << 16)
 	h.FirstBlock.Last = bh&1 != 0
 	blockType := blockType((bh >> 1) & 3)

vendor/github.com/klauspost/compress/zstd/decoder.go

@@ -179,8 +179,7 @@ func (d *Decoder) Reset(r io.Reader) error {
 
 	// If bytes buffer and < 1MB, do sync decoding anyway.
 	if bb, ok := r.(byter); ok && bb.Len() < 1<<20 {
-		var bb2 byter
-		bb2 = bb
+		bb2 := bb
 		if debug {
 			println("*bytes.Buffer detected, doing sync decode, len:", bb.Len())
 		}
@@ -237,20 +236,17 @@ func (d *Decoder) drainOutput() {
 		println("current already flushed")
 		return
 	}
-	for {
-		select {
-		case v := <-d.current.output:
-			if v.d != nil {
-				if debug {
-					printf("re-adding decoder %p", v.d)
-				}
-				d.decoders <- v.d
-			}
-			if v.err == errEndOfStream {
-				println("current flushed")
-				d.current.flushed = true
-				return
+	for v := range d.current.output {
+		if v.d != nil {
+			if debug {
+				printf("re-adding decoder %p", v.d)
 			}
+			d.decoders <- v.d
+		}
+		if v.err == errEndOfStream {
+			println("current flushed")
+			d.current.flushed = true
+			return
 		}
 	}
 }

vendor/github.com/klauspost/compress/zstd/decoder_options.go

@@ -6,7 +6,6 @@ package zstd
 
 import (
 	"errors"
-	"fmt"
 	"runtime"
 )
 
@@ -43,7 +42,7 @@ func WithDecoderLowmem(b bool) DOption {
 func WithDecoderConcurrency(n int) DOption {
 	return func(o *decoderOptions) error {
 		if n <= 0 {
-			return fmt.Errorf("Concurrency must be at least 1")
+			return errors.New("concurrency must be at least 1")
 		}
 		o.concurrent = n
 		return nil
@@ -61,7 +60,7 @@ func WithDecoderMaxMemory(n uint64) DOption {
 			return errors.New("WithDecoderMaxMemory must be at least 1")
 		}
 		if n > 1<<63 {
-			return fmt.Errorf("WithDecoderMaxmemory must be less than 1 << 63")
+			return errors.New("WithDecoderMaxmemory must be less than 1 << 63")
 		}
 		o.maxDecodedSize = n
 		return nil

vendor/github.com/klauspost/compress/zstd/enc_base.go

@@ -150,14 +150,15 @@ func (e *fastBase) resetBase(d *dict, singleBlock bool) {
 	} else {
 		e.crc.Reset()
 	}
-	if (!singleBlock || d.DictContentSize() > 0) && cap(e.hist) < int(e.maxMatchOff*2)+d.DictContentSize() {
-		l := e.maxMatchOff*2 + int32(d.DictContentSize())
-		// Make it at least 1MB.
-		if l < 1<<20 {
-			l = 1 << 20
+	if d != nil {
+		low := e.lowMem
+		if singleBlock {
+			e.lowMem = true
 		}
-		e.hist = make([]byte, 0, l)
+		e.ensureHist(d.DictContentSize() + maxCompressedBlockSize)
+		e.lowMem = low
 	}
+
 	// We offset current position so everything will be out of reach.
 	// If above reset line, history will be purged.
 	if e.cur < bufferReset {

vendor/github.com/klauspost/compress/zstd/encoder.go

@@ -340,13 +340,13 @@ func (e *Encoder) ReadFrom(r io.Reader) (n int64, err error) {
 				println("ReadFrom: got EOF final block:", len(e.state.filling))
 			}
 			return n, nil
+		case nil:
 		default:
 			if debug {
 				println("ReadFrom: got error:", err)
 			}
 			e.state.err = err
 			return n, err
-		case nil:
 		}
 		if len(src) > 0 {
 			if debug {

vendor/github.com/klauspost/compress/zstd/encoder_options.go

@@ -73,7 +73,7 @@ func WithEncoderCRC(b bool) EOption {
 }
 
 // WithEncoderConcurrency will set the concurrency,
-// meaning the maximum number of decoders to run concurrently.
+// meaning the maximum number of encoders to run concurrently.
 // The value supplied must be at least 1.
 // By default this will be set to GOMAXPROCS.
 func WithEncoderConcurrency(n int) EOption {

vendor/github.com/klauspost/compress/zstd/framedec.go

@@ -121,7 +121,7 @@ func (d *frameDec) reset(br byteBuffer) error {
 	d.SingleSegment = fhd&(1<<5) != 0
 
 	if fhd&(1<<3) != 0 {
-		return errors.New("Reserved bit set on frame header")
+		return errors.New("reserved bit set on frame header")
 	}
 
 	// Read Window_Descriptor

vendor/github.com/klauspost/compress/zstd/fse_encoder.go

@@ -708,7 +708,6 @@ func (c *cState) init(bw *bitWriter, ct *cTable, first symbolTransform) {
 	im := int32((nbBitsOut << 16) - first.deltaNbBits)
 	lu := (im >> nbBitsOut) + int32(first.deltaFindState)
 	c.state = c.stateTable[lu]
-	return
 }
 
 // encode the output symbol provided and write it to the bitstream.

vendor/github.com/klauspost/compress/zstd/fse_predefined.go

@@ -59,7 +59,7 @@ func fillBase(dst []baseOffset, base uint32, bits ...uint8) {
 	}
 	for i, bit := range bits {
 		if base > math.MaxInt32 {
-			panic(fmt.Sprintf("invalid decoding table, base overflows int32"))
+			panic("invalid decoding table, base overflows int32")
 		}
 
 		dst[i] = baseOffset{

vendor/github.com/klauspost/compress/zstd/seqenc.go

@@ -35,7 +35,6 @@ func (s *seqCoders) setPrev(ll, ml, of *fseEncoder) {
 		// Ensure we cannot reuse by accident
 		prevEnc := *prev
 		prevEnc.symbolLen = 0
-		return
 	}
 	compareSwap(ll, &s.llEnc, &s.llPrev)
 	compareSwap(ml, &s.mlEnc, &s.mlPrev)

vendor/github.com/klauspost/compress/zstd/snappy.go

@@ -10,8 +10,8 @@ import (
 	"hash/crc32"
 	"io"
 
+	"github.com/golang/snappy"
 	"github.com/klauspost/compress/huff0"
-	"github.com/klauspost/compress/snappy"
 )
 
 const (
@@ -185,7 +185,6 @@ func (r *SnappyConverter) Convert(in io.Reader, w io.Writer) (int64, error) {
 				r.block.reset(nil)
 				r.block.literals, err = snappy.Decode(r.block.literals[:n], r.buf[snappyChecksumSize:chunkLen])
 				if err != nil {
-					println("snappy.Decode:", err)
 					return written, err
 				}
 				err = r.block.encodeLits(r.block.literals, false)

vendor/github.com/klauspost/compress/zstd/zstd.go

@@ -5,6 +5,7 @@ package zstd
 
 import (
 	"bytes"
+	"encoding/binary"
 	"errors"
 	"log"
 	"math"
@@ -126,26 +127,15 @@ func matchLen(a, b []byte) int {
 }
 
 func load3232(b []byte, i int32) uint32 {
-	// Help the compiler eliminate bounds checks on the read so it can be done in a single read.
-	b = b[i:]
-	b = b[:4]
-	return uint32(b[0]) | uint32(b[1])<<8 | uint32(b[2])<<16 | uint32(b[3])<<24
+	return binary.LittleEndian.Uint32(b[i:])
 }
 
 func load6432(b []byte, i int32) uint64 {
-	// Help the compiler eliminate bounds checks on the read so it can be done in a single read.
-	b = b[i:]
-	b = b[:8]
-	return uint64(b[0]) | uint64(b[1])<<8 | uint64(b[2])<<16 | uint64(b[3])<<24 |
-		uint64(b[4])<<32 | uint64(b[5])<<40 | uint64(b[6])<<48 | uint64(b[7])<<56
+	return binary.LittleEndian.Uint64(b[i:])
 }
 
 func load64(b []byte, i int) uint64 {
-	// Help the compiler eliminate bounds checks on the read so it can be done in a single read.
-	b = b[i:]
-	b = b[:8]
-	return uint64(b[0]) | uint64(b[1])<<8 | uint64(b[2])<<16 | uint64(b[3])<<24 |
-		uint64(b[4])<<32 | uint64(b[5])<<40 | uint64(b[6])<<48 | uint64(b[7])<<56
+	return binary.LittleEndian.Uint64(b[i:])
 }
 
 type byter interface {