diff --git a/tools-image/Dockerfile b/tools-image/Dockerfile
index 1175f79..1672dee 100644
--- a/tools-image/Dockerfile
+++ b/tools-image/Dockerfile
@@ -3,6 +3,8 @@ ARG LEAP_VERSION=15.4
 ARG LUET_VERSION=0.32.5
 FROM quay.io/kairos/packages:elemental-cli-system-0.20220921 AS elemental
 FROM quay.io/luet/base:$LUET_VERSION AS luet
+
+## amd64 Live CD artifacts
 FROM quay.io/kairos/packages:grub2-livecd-0.0.4  AS grub2
 FROM quay.io/kairos/packages:grub2-efi-image-livecd-0.0.4 AS efi
 
@@ -16,9 +18,17 @@ COPY --from=efi / /efi
 RUN zypper ref && zypper dup -y
 RUN zypper ref && zypper in -y xfsprogs parted util-linux-systemd e2fsprogs curl util-linux udev rsync grub2 dosfstools grub2-x86_64-efi squashfs mtools xorriso lvm2
 RUN mkdir /config
+# Arm image build deps
+RUN zypper in -y jq docker git curl gptfdisk kpartx sudo
 
+# ISO build
 COPY ./config.yaml /config/manifest.yaml
 COPY ./entrypoint.sh /entrypoint.sh
 COPY ./add-cloud-init.sh /add-cloud-init.sh
 
+# ARM
+COPY ./build-arm-image.sh /build-arm-image.sh
+COPY ./arm /arm
+
+
 ENTRYPOINT [ "/entrypoint.sh" ]
diff --git a/tools-image/arm/boards/odroid_c2.sh b/tools-image/arm/boards/odroid_c2.sh
new file mode 100755
index 0000000..0c626ba
--- /dev/null
+++ b/tools-image/arm/boards/odroid_c2.sh
@@ -0,0 +1,21 @@
+#!/bin/bash
+
+image=$1
+
+if [ -z "$image" ]; then
+    echo "No image specified"
+    exit 1
+fi
+
+if [ ! -e "$WORKDIR/luet.yaml" ]; then
+    ls -liah $WORKDIR
+    echo "No valid config file"
+    cat "$WORKDIR/luet.yaml"
+    exit 1
+fi
+
+sudo luet install --config $WORKDIR/luet.yaml -y --system-target $WORKDIR firmware/odroid-c2
+# conv=notrunc ?
+dd if=$WORKDIR/bl1.bin.hardkernel of=$image conv=fsync bs=1 count=442
+dd if=$WORKDIR/bl1.bin.hardkernel of=$image conv=fsync bs=512 skip=1 seek=1
+dd if=$WORKDIR/u-boot.odroidc2 of=$image conv=fsync bs=512 seek=97
\ No newline at end of file
diff --git a/tools-image/arm/boards/rpi64.sh b/tools-image/arm/boards/rpi64.sh
new file mode 100755
index 0000000..1d159a5
--- /dev/null
+++ b/tools-image/arm/boards/rpi64.sh
@@ -0,0 +1,28 @@
+#!/bin/bash
+
+partprobe
+
+kpartx -va $DRIVE
+
+image=$1
+
+if [ -z "$image" ]; then
+    echo "No image specified"
+    exit 1
+fi
+
+if [ ! -e "$WORKDIR/luet.yaml" ]; then
+    ls -liah $WORKDIR
+    echo "No valid config file"
+    cat "$WORKDIR/luet.yaml"
+    exit 1
+fi
+set -ax
+TEMPDIR="$(mktemp -d)"
+echo $TEMPDIR
+mount "${device}p1" "${TEMPDIR}"
+sudo luet install --config $WORKDIR/luet.yaml -y --system-target $TEMPDIR firmware/u-boot-rpi64
+sudo luet install --config $WORKDIR/luet.yaml -y --system-target $TEMPDIR firmware/raspberrypi-firmware
+sudo luet install --config $WORKDIR/luet.yaml -y --system-target $TEMPDIR firmware/raspberrypi-firmware-config
+sudo luet install --config $WORKDIR/luet.yaml -y --system-target $TEMPDIR firmware/raspberrypi-firmware-dt
+umount "${TEMPDIR}"
diff --git a/tools-image/build-arm-image.sh b/tools-image/build-arm-image.sh
new file mode 100755
index 0000000..f7dd611
--- /dev/null
+++ b/tools-image/build-arm-image.sh
@@ -0,0 +1,449 @@
+#!/bin/bash
+
+## This is a re-adaptation of https://github.com/rancher/elemental-toolkit/blob/main/images/arm-img-builder.sh
+
+set -ex
+
+load_vars() {
+
+  model=${MODEL:-odroid_c2}
+
+  directory=${DIRECTORY:-}
+  output_image="${OUTPUT_IMAGE:-arm.img}"
+  # Img creation options. Size is in MB for all of the vars below
+  size="${SIZE:-7544}"
+  state_size="${STATE_SIZE:-4992}"
+  recovery_size="${RECOVERY_SIZE:-2192}"
+  default_active_size="${DEFAULT_ACTIVE_SIZE:-2400}"
+
+  ## Repositories
+  final_repo="${FINAL_REPO:-quay.io/costoolkit/releases-teal-arm64}"
+  repo_type="${REPO_TYPE:-docker}"
+
+  # Warning: these default values must be aligned with the values provided
+  # in 'packages/cos-config/cos-config', provide an environment file using the
+  # --cos-config flag if different values are needed.
+  : "${OEM_LABEL:=COS_OEM}"
+  : "${RECOVERY_LABEL:=COS_RECOVERY}"
+  : "${ACTIVE_LABEL:=COS_ACTIVE}"
+  : "${PASSIVE_LABEL:=COS_PASSIVE}"
+  : "${PERSISTENT_LABEL:=COS_PERSISTENT}"
+  : "${SYSTEM_LABEL:=COS_SYSTEM}"
+  : "${STATE_LABEL:=COS_STATE}"
+}
+
+cleanup() {
+	sync
+	sync
+	sleep 5
+	sync
+  if [ -n "$EFI" ]; then
+    rm -rf $EFI
+  fi
+  if [ -n "$RECOVERY" ]; then
+    rm -rf $RECOVERY
+  fi
+  if [ -n "$STATEDIR" ]; then
+    rm -rf $STATEDIR
+  fi
+  if [ -n "$TARGET" ]; then
+    umount $TARGET || true
+    umount $LOOP || true
+    rm -rf $TARGET
+  fi
+  if [ -n "$WORKDIR" ]; then
+    rm -rf $WORKDIR
+  fi
+  if [ -n "$DRIVE" ]; then
+    umount $DRIVE || true
+  fi
+  if [ -n "$recovery" ]; then
+    umount $recovery || true
+  fi
+  if [ -n "$state" ]; then
+    umount $state || true
+  fi
+  if [ -n "$efi" ]; then
+    umount $efi || true
+  fi
+  if [ -n "$oem" ]; then
+    umount $oem || true
+  fi
+  losetup -D || true
+}
+
+ensure_dir_structure() {
+    local target=$1
+    for mnt in /sys /proc /dev /tmp /boot /usr/local /oem
+    do
+        if [ ! -d "${target}${mnt}" ]; then
+          mkdir -p ${target}${mnt}
+        fi
+    done
+}
+
+usage()
+{
+    echo "Usage: $0 [options] image.img"
+    echo ""
+    echo "Example: $0 --cos-config cos-config  --model odroid-c2 --docker-image <image> output.img"
+    echo ""
+    echo "Flags:"
+    echo " --cos-config: (optional) Specifies a cos-config file for required environment variables"
+    echo " --config: (optional) Specify a cloud-init config file to embed into the final image"
+    echo " --manifest: (optional) Specify a manifest file to customize efi/grub packages installed into the image"
+    echo " --size: (optional) Image size (MB)"
+    echo " --state-partition-size: (optional) Size of the state partition (MB)"
+    echo " --recovery-partition-size: (optional) Size of the recovery partition (MB)"
+    echo " --images-size: (optional) Size of the active/passive/recovery images (MB)"
+    echo " --docker-image: (optional) A container image which will be used for active/passive/recovery system"
+    echo " --local: (optional) Use local repository when building"
+    echo " --directory: (optional) A directory which will be used for active/passive/recovery system"
+    echo " --model: (optional) The board model"
+    echo " --final-repo: (optional) The luet repository used to download bits required for building"
+    echo " --repo-type: (optional) The luet repository type used to download bits required for building"
+    exit 1
+}
+
+get_url()
+{
+    FROM=$1
+    TO=$2
+    case $FROM in
+        ftp*|http*|tftp*)
+            n=0
+            attempts=5
+            until [ "$n" -ge "$attempts" ]
+            do
+                curl -o $TO -fL ${FROM} && break
+                n=$((n+1))
+                echo "Failed to download, retry attempt ${n} out of ${attempts}"
+                sleep 2
+            done
+            ;;
+        *)
+            cp -f $FROM $TO
+            ;;
+    esac
+}
+
+trap "cleanup" 1 2 3 6 9 14 15 EXIT
+
+load_vars
+
+while [ "$#" -gt 0 ]; do
+    case $1 in
+        --cos-config)
+            shift 1
+            cos_config=$1
+            ;;
+        --config)
+            shift 1
+            config=$1
+            ;;
+        --manifest)
+            shift 1
+            manifest=$1
+            ;;
+        --size)
+            shift 1
+            size=$1
+            ;;
+        --local)
+            local_build=true
+            ;;
+        --state-partition-size)
+            shift 1
+            state_size=$1
+            ;;
+        --recovery-partition-size)
+            shift 1
+            recovery_size=$1
+            ;;
+        --images-size)
+            shift 1
+            default_active_size=$1
+            ;;
+        --docker-image)
+            shift 1
+            CONTAINER_IMAGE=$1
+            ;;
+        --directory)
+            shift 1
+            directory=$1
+            ;;
+        --model)
+            shift 1
+            model=$1
+            ;;
+        --final-repo)
+            shift 1
+            final_repo=$1
+            ;;
+        --repo-type)
+            shift 1
+            repo_type=$1
+            ;;
+        -h)
+            usage
+            ;;
+        --help)
+            usage
+            ;;
+        *)
+            if [ "$#" -gt 2 ]; then
+                usage
+            fi
+            output_image=$1
+            break
+            ;;
+    esac
+    shift 1
+done
+
+if [ "$model" == "rpi64" ]; then
+    container_image=${CONTAINER_IMAGE:-quay.io/costoolkit/examples:rpi-latest}
+else
+    # Odroid C2 image contains kernel-default-extra, might have broader support
+    container_image=${CONTAINER_IMAGE:-quay.io/costoolkit/examples:odroid-c2-latest}
+fi
+
+if [ -n "$cos_config"] && [ -e "$cos_config" ]; then
+  source "$cos_config"
+fi
+
+if [ -z "$output_image" ]; then
+  echo "No image file specified"
+  exit 1
+fi
+
+if [ -n "$manifest" ]; then
+  YQ_PACKAGES_COMMAND=(yq e -o=json "$manifest")
+  final_repo=${final_repo:-$(yq e ".raw_disk.$model.repo" "${manifest}")}
+fi
+
+echo "@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@"
+echo "Image Size: $size MB."
+echo "Recovery Partition: $recovery_size."
+echo "State Partition: $state_size MB."
+echo "Images size (active/passive/recovery.img): $default_active_size MB."
+echo "Model: $model"
+if [ -n "$container_image" ] && [ -z "$directory" ]; then
+  echo "Container image: $container_image"
+fi
+if [ -n "$directory" ]; then
+  echo "Root from directory: $directory"
+fi
+echo "@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@"
+
+# Temp dir used during build
+WORKDIR=$(mktemp -d --tmpdir arm-builder.XXXXXXXXXX)
+#ROOT_DIR=$(git rev-parse --show-toplevel)
+TARGET=$(mktemp -d --tmpdir arm-builder.XXXXXXXXXX)
+STATEDIR=$(mktemp -d --tmpdir arm-builder.XXXXXXXXXX)
+
+# Create a luet config for grabbing packages from local and remote repositories (local with high prio)
+cat << EOF > $WORKDIR/luet.yaml
+repositories:
+  - name: cOS
+    enable: true
+    urls:
+      - $final_repo
+    type: $repo_type
+    priority: 90
+EOF
+
+
+export WORKDIR
+
+# Prepare active.img
+
+echo ">> Preparing active.img"
+mkdir -p ${STATEDIR}/cOS
+
+dd if=/dev/zero of=${STATEDIR}/cOS/active.img bs=1M count=$default_active_size
+
+mkfs.ext2 ${STATEDIR}/cOS/active.img -L ${ACTIVE_LABEL}
+
+sync
+
+LOOP=$(losetup --show -f ${STATEDIR}/cOS/active.img)
+if [ -z "$LOOP" ]; then
+echo "No device"
+exit 1
+fi
+
+mount -t ext2 $LOOP $TARGET
+
+ensure_dir_structure $TARGET
+
+# Download the container image
+if [ -z "$directory" ]; then
+  echo ">>> Downloading container image"
+  elemental pull-image $container_image $TARGET
+else
+  echo ">>> Copying files from $directory"
+  rsync -axq --exclude='host' --exclude='mnt' --exclude='proc' --exclude='sys' --exclude='dev' --exclude='tmp' ${directory}/ $TARGET
+fi
+
+umount $TARGET
+sync
+
+if [ -n "$LOOP" ]; then
+    losetup -d $LOOP
+fi
+
+echo ">> Preparing passive.img"
+cp -rfv ${STATEDIR}/cOS/active.img ${STATEDIR}/cOS/passive.img
+tune2fs -L ${PASSIVE_LABEL} ${STATEDIR}/cOS/passive.img
+
+# Preparing recovery
+echo ">> Preparing recovery.img"
+RECOVERY=$(mktemp -d --tmpdir arm-builder.XXXXXXXXXX)
+if [ -z "$RECOVERY" ]; then
+  echo "No recovery directory"
+  exit 1
+fi
+
+mkdir -p ${RECOVERY}/cOS
+cp -rfv ${STATEDIR}/cOS/active.img ${RECOVERY}/cOS/recovery.img
+
+tune2fs -L ${SYSTEM_LABEL} ${RECOVERY}/cOS/recovery.img
+
+# Install real grub config to recovery
+if [ -z "$manifest" ]; then
+  luet install --config $WORKDIR/luet.yaml -y --system-target $RECOVERY system/grub2-config 
+  luet install --config $WORKDIR/luet.yaml -y --system-target $RECOVERY/grub2 system/grub2-artifacts
+else
+  while IFS=$'\t' read -r name target ; do
+    if [ "$target" == "root/grub2" ]; then
+      luet install --no-spinner --system-target $RECOVERY/grub2 -y "$name"
+    fi
+    if [ "$target" == "root" ]; then
+      luet install --no-spinner --system-target $RECOVERY -y "$name"
+    fi
+  done < <("${YQ_PACKAGES_COMMAND[@]}" | jq -r ".raw_disk.$model.packages[] | [.name, .target] | @tsv")
+fi
+
+ # Remove luet cache
+rm -rf $RECOVERY/var $RECOVERY/grub2/var
+
+sync
+
+# Prepare efi files
+echo ">> Preparing EFI partition"
+EFI=$(mktemp -d --tmpdir arm-builder.XXXXXXXXXX)
+if [ -z "$EFI" ]; then
+  echo "No EFI directory"
+  exit 1
+fi
+
+if [ -z "$manifest" ]; then
+  luet install --config $WORKDIR/luet.yaml -y --system-target $EFI system/grub2-efi-image
+else
+  while IFS=$'\t' read -r name target ; do
+    if [ "$target" == "efi" ]; then
+      luet install --no-spinner --system-target $EFI -y "$name"
+    fi
+  done < <("${YQ_PACKAGES_COMMAND[@]}" | jq -r ".raw_disk.$model.packages[] | [.name, .target] | @tsv")
+fi
+
+ # Remove luet cache
+rm -rf $EFI/var
+
+echo ">> Writing image and partition table"
+dd if=/dev/zero of="${output_image}" bs=1024000 count="${size}" || exit 1
+if [ "$model" == "rpi64" ]; then 
+    sgdisk -n 1:8192:+96M -c 1:EFI -t 1:0c00 ${output_image}
+else
+    sgdisk -n 1:8192:+16M -c 1:EFI -t 1:0700 ${output_image}
+fi
+sgdisk -n 2:0:+${state_size}M -c 2:state -t 2:8300 ${output_image}
+sgdisk -n 3:0:+${recovery_size}M -c 3:recovery -t 3:8300 ${output_image}
+sgdisk -n 4:0:+64M -c 4:persistent -t 4:8300 ${output_image}
+
+sgdisk -m 1:2:3:4 ${output_image}
+
+if [ "$model" == "rpi64" ]; then 
+    sfdisk --part-type ${output_image} 1 c
+fi
+
+# Prepare the image and copy over the files
+
+export DRIVE=$(losetup -f "${output_image}" --show)
+if [ -z "${DRIVE}" ]; then
+	echo "Cannot execute losetup for $output_image"
+	exit 1
+fi
+
+device=${DRIVE/\/dev\//}
+
+if [ -z "$device" ]; then
+  echo "No device"
+  exit 1
+fi
+
+export device="/dev/mapper/${device}"
+
+partprobe
+
+kpartx -va $DRIVE
+
+echo ">> Populating partitions"
+efi=${device}p1
+state=${device}p2
+recovery=${device}p3
+persistent=${device}p4
+
+# Create partitions (RECOVERY, STATE, COS_PERSISTENT)
+mkfs.vfat -F 32 ${efi}
+fatlabel ${efi} COS_GRUB
+
+mkfs.ext4 -F -L ${RECOVERY_LABEL} $recovery
+mkfs.ext4 -F -L ${STATE_LABEL} $state
+mkfs.ext4 -F -L ${PERSISTENT_LABEL} $persistent
+
+mkdir $WORKDIR/state
+mkdir $WORKDIR/recovery
+mkdir $WORKDIR/efi
+
+mount $recovery $WORKDIR/recovery
+mount $state $WORKDIR/state
+mount $efi $WORKDIR/efi
+
+# Set a OEM config file if specified
+if [ -n "$config" ]; then
+  echo ">> Copying $config OEM config file"
+  mkdir $WORKDIR/persistent
+  mount $persistent $WORKDIR/persistent
+  mkdir $WORKDIR/persistent/cloud-config
+  get_url $config $WORKDIR/persistent/cloud-config/99_custom.yaml
+  umount $WORKDIR/persistent
+fi
+
+# Copy over content
+cp -arf $EFI/* $WORKDIR/efi
+cp -arf $RECOVERY/* $WORKDIR/recovery
+cp -arf $STATEDIR/* $WORKDIR/state
+
+umount $WORKDIR/recovery
+umount $WORKDIR/state
+umount $WORKDIR/efi
+
+sync
+
+# Flash uboot and vendor-specific bits
+echo ">> Performing $model specific bits.."
+/arm/boards/$model.sh ${DRIVE}
+
+kpartx -dv $DRIVE
+
+umount $DRIVE || true
+
+echo ">> Done writing $output_image"
+
+echo ">> Creating SHA256 sum"
+
+sha256sum $output_image > $output_image.sha256
+
+cleanup