mirror of
https://github.com/projectacrn/acrn-hypervisor.git
synced 2025-06-18 11:47:30 +00:00
acrn-config: add template xmls for dynamic config
The template xmls are used to be the dafault VM settings for dynamically adding VMs. Tracked-On: #4641 Signed-off-by: Shuang Zheng <shuang.zheng@intel.com> Reviewed-by: Victor Sun <victor.sun@intel.com> Acked-by: Terry Zou <terry.zou@intel.com>
This commit is contained in:
Shuang Zheng
wenlingz
parent
b9ce7617cd
commit
6aeadb9cbb
51
misc/acrn-config/xmls/config-xmls/template/HV.xml
Normal file
51
misc/acrn-config/xmls/config-xmls/template/HV.xml
Normal file
@ -0,0 +1,51 @@
|
||||
<acrn-config board="" scenario="">
|
||||
<hv>
|
||||
<DEBUG_OPTIONS desc="Debug options for ACRN hypervisor, only valid on debug version">
|
||||
<RELEASE desc="Release build. 'y' for Release, 'n' for Debug."></RELEASE>
|
||||
<SERIAL_CONSOLE desc="The serial device which is used for hypervisor debug, only valid on Debug version."></SERIAL_CONSOLE>
|
||||
<MEM_LOGLEVEL desc="Default loglevel in memory"></MEM_LOGLEVEL>
|
||||
<NPK_LOGLEVEL desc="Default loglevel for the hypervisor NPK log"></NPK_LOGLEVEL>
|
||||
<CONSOLE_LOGLEVEL desc="Default loglevel on the serial console"></CONSOLE_LOGLEVEL>
|
||||
<LOG_DESTINATION desc="Bitmap of consoles where logs are printed."></LOG_DESTINATION>
|
||||
<LOG_BUF_SIZE desc="Capacity of logbuf for each physical cpu."></LOG_BUF_SIZE>
|
||||
</DEBUG_OPTIONS>
|
||||
|
||||
<FEATURES>
|
||||
<RELOC desc="Enable hypervisor relocation"></RELOC>
|
||||
<SCHEDULER desc="The CPU scheduler to be used by the hypervisor."></SCHEDULER>
|
||||
<MULTIBOOT2 desc="Support boot ACRN from multiboot2 protocol."></MULTIBOOT2>
|
||||
<HYPERV_ENABLED desc="Enable Hyper-V enlightenment"></HYPERV_ENABLED>
|
||||
<IOMMU_ENFORCE_SNP desc="IOMMU enforce snoop behavior of DMA operation."></IOMMU_ENFORCE_SNP>
|
||||
<ACPI_PARSE_ENABLED desc="Enable ACPI runtime parsing."></ACPI_PARSE_ENABLED>
|
||||
<L1D_VMENTRY_ENABLED desc="Enable L1 cache flush before VM entry."></L1D_VMENTRY_ENABLED>
|
||||
<MCE_ON_PSC_DISABLED desc="Force to disable software workaround for Machine Check Error on Page Size Change."></MCE_ON_PSC_DISABLED>
|
||||
</FEATURES>
|
||||
|
||||
<MEMORY>
|
||||
<STACK_SIZE desc="Capacity of one stack, in bytes."></STACK_SIZE>
|
||||
<HV_RAM_SIZE desc="Size of the RAM region used by the hypervisor"></HV_RAM_SIZE>
|
||||
<HV_RAM_START desc="2M-aligned Start physical address of the RAM region used by the hypervisor."></HV_RAM_START>
|
||||
<LOW_RAM_SIZE desc="Size of the low RAM region"></LOW_RAM_SIZE>
|
||||
<UOS_RAM_SIZE desc="Size of the User OS (UOS) RAM."></UOS_RAM_SIZE>
|
||||
<SOS_RAM_SIZE desc="Size of the Service OS (SOS) RAM."></SOS_RAM_SIZE>
|
||||
<PLATFORM_RAM_SIZE desc="Size of the physical platform RAM"></PLATFORM_RAM_SIZE>
|
||||
</MEMORY>
|
||||
|
||||
<CAPACITIES desc="Capacity limits for static assigned data struct or maximum supported resouce">
|
||||
<IOMMU_BUS_NUM desc="Highest PCI bus ID used during IOMMU initialization."></IOMMU_BUS_NUM>
|
||||
<MAX_IR_ENTRIES desc="Maximum number of Interrupt Remapping Entries."></MAX_IR_ENTRIES>
|
||||
<MAX_IOAPIC_NUM desc="Maximum number of IO-APICs."></MAX_IOAPIC_NUM>
|
||||
<MAX_KATA_VM_NUM desc="Maximum number of Kata Containers in SOS."></MAX_KATA_VM_NUM>
|
||||
<MAX_PCI_DEV_NUM desc="Maximum number of PCI devices."></MAX_PCI_DEV_NUM>
|
||||
<MAX_IOAPIC_LINES desc="Maximum number of interrupt lines per IOAPIC."></MAX_IOAPIC_LINES>
|
||||
<MAX_PT_IRQ_ENTRIES desc="Maximum number of interrupt source for PT devices."></MAX_PT_IRQ_ENTRIES>
|
||||
<MAX_MSIX_TABLE_NUM desc="Maximum number of MSI-X tables per device."></MAX_MSIX_TABLE_NUM>
|
||||
<MAX_EMULATED_MMIO desc="Maximum number of emulated MMIO regions."></MAX_EMULATED_MMIO>
|
||||
</CAPACITIES>
|
||||
|
||||
<MISC_CFG>
|
||||
<GPU_SBDF desc="Segment, Bus, Device, and function of the GPU."></GPU_SBDF>
|
||||
<UEFI_OS_LOADER_NAME desc="UEFI OS loader name."></UEFI_OS_LOADER_NAME>
|
||||
</MISC_CFG>
|
||||
</hv>
|
||||
</acrn-config>
|
||||
27
misc/acrn-config/xmls/config-xmls/template/KATA_VM.xml
Normal file
27
misc/acrn-config/xmls/config-xmls/template/KATA_VM.xml
Normal file
@ -0,0 +1,27 @@
|
||||
<acrn-config board="" scenario="">
|
||||
<vm id="0" configurable="1" desc="specific for Kata">
|
||||
<vm_type readonly="true" desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM.">KATA_VM</vm_type>
|
||||
<clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
</clos>
|
||||
<vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
|
||||
<pcpu_id></pcpu_id>
|
||||
</vcpu_affinity>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned"></base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned"></size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base configurable="0" desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_BASE</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base configurable="0" desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_BASE</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to."></target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
35
misc/acrn-config/xmls/config-xmls/template/LAUNCH_RTVM.xml
Normal file
35
misc/acrn-config/xmls/config-xmls/template/LAUNCH_RTVM.xml
Normal file
@ -0,0 +1,35 @@
|
||||
<acrn-config board="" scenario="" uos_launcher="">
|
||||
<uos id="2">
|
||||
<uos_type desc="UOS type">PREEMPT-RT LINUX</uos_type>
|
||||
<rtos_type desc="UOS Realtime capability">Hard RT</rtos_type>
|
||||
<mem_size desc="UOS memory size in MByte"></mem_size>
|
||||
<gvt_args configurable="0" desc="GVT settings. Set it to gvtd for GVTd, otherwise is GVTg arguments. The recommendation arguments for GVTg is 64 448 8. Leave it blank to disable GVT."></gvt_args>
|
||||
<vbootloader desc="virtual bootloader method" readonly="true">ovmf</vbootloader>
|
||||
<vuart0 desc="vUART0 which emulated by device model"></vuart0>
|
||||
<cpu_sharing desc="Whether the binding pCPUs are sharing with other VMs." readonly="true">Disabled</cpu_sharing>
|
||||
<poweroff_channel desc="the method of power off uos"></poweroff_channel>
|
||||
<usb_xhci desc="USB xHCI mediator configuration. input format: bus#-port#[:bus#-port#: ...]. e.g.: 1-2:2-4"></usb_xhci>
|
||||
|
||||
<passthrough_devices>
|
||||
<usb_xdci desc="vm usb_xdci device"></usb_xdci>
|
||||
<audio desc="vm audio device"></audio>
|
||||
<audio_codec desc="vm audio codec device"></audio_codec>
|
||||
<ipu desc="vm ipu device"></ipu>
|
||||
<ipu_i2c desc="vm ipu_i2c device"></ipu_i2c>
|
||||
<cse desc="vm cse device"></cse>
|
||||
<wifi desc="vm wifi device"></wifi>
|
||||
<bluetooth desc="vm bluetooth"></bluetooth>
|
||||
<sd_card desc="vm sd card device"></sd_card>
|
||||
<ethernet desc="vm ethernet device"></ethernet>
|
||||
<sata desc="vm sata device"></sata>
|
||||
<nvme desc="vm nvme device"></nvme>
|
||||
</passthrough_devices>
|
||||
|
||||
<virtio_devices>
|
||||
<network desc="virtio network devices setting. Input format: tap_name,[vhost],[mac=XX:XX:XX:XX:XX:XX]."></network>
|
||||
<input desc="virtio input device"></input>
|
||||
<block desc="virtio block device setting. format: [blk partition:][img path] e.g.: /dev/sda3:./a/b.img"></block>
|
||||
<console desc="virtio console device,input format: [@]stdio|tty|pty|sock:portname[=portpath][,[@]stdio|tty|pty:portname[=portpath]]"></console>
|
||||
</virtio_devices>
|
||||
</uos>
|
||||
</acrn-config>
|
||||
@ -0,0 +1,35 @@
|
||||
<acrn-config board="" scenario="" uos_launcher="">
|
||||
<uos id="1">
|
||||
<uos_type desc="UOS type"></uos_type>
|
||||
<rtos_type desc="UOS Realtime capability">no</rtos_type>
|
||||
<mem_size desc="UOS memory size in MByte"></mem_size>
|
||||
<gvt_args desc="GVT settings. Set it to gvtd for GVTd, otherwise is GVTg arguments. The recommendation arguments for GVTg is 64 448 8. Leave it blank to disable GVT.">gvtd</gvt_args>
|
||||
<vbootloader desc="virtual bootloader method" readonly="true">ovmf</vbootloader>
|
||||
<vuart0 desc="vUART0 which emulated by device model"></vuart0>
|
||||
<cpu_sharing desc="Whether the binding pCPUs are sharing with other VMs."></cpu_sharing>
|
||||
<poweroff_channel desc="the method of power off uos"></poweroff_channel>
|
||||
<usb_xhci desc="USB xHCI mediator configuration. input format: bus#-port#[:bus#-port#: ...]. e.g.: 1-2:2-4"></usb_xhci>
|
||||
|
||||
<passthrough_devices>
|
||||
<usb_xdci desc="vm usb_xdci device"></usb_xdci>
|
||||
<audio desc="vm audio device"></audio>
|
||||
<audio_codec desc="vm audio codec device"></audio_codec>
|
||||
<ipu desc="vm ipu device"></ipu>
|
||||
<ipu_i2c desc="vm ipu_i2c device"></ipu_i2c>
|
||||
<cse desc="vm cse device"></cse>
|
||||
<wifi desc="vm wifi device"></wifi>
|
||||
<bluetooth desc="vm bluetooth"></bluetooth>
|
||||
<sd_card desc="vm sd card device"></sd_card>
|
||||
<ethernet desc="vm ethernet device"></ethernet>
|
||||
<sata desc="vm sata device"></sata>
|
||||
<nvme desc="vm nvme device"></nvme>
|
||||
</passthrough_devices>
|
||||
|
||||
<virtio_devices>
|
||||
<network desc="virtio network devices setting. Input format: tap_name,[vhost],[mac=XX:XX:XX:XX:XX:XX]."></network>
|
||||
<input desc="virtio input device"></input>
|
||||
<block desc="virtio block device setting. format: [blk partition:][img path] e.g.: /dev/sda3:./a/b.img"></block>
|
||||
<console desc="virtio console device,input format: [@]stdio|tty|pty|sock:portname[=portpath][,[@]stdio|tty|pty:portname[=portpath]]"></console>
|
||||
</virtio_devices>
|
||||
</uos>
|
||||
</acrn-config>
|
||||
30
misc/acrn-config/xmls/config-xmls/template/POST_RT_VM.xml
Normal file
30
misc/acrn-config/xmls/config-xmls/template/POST_RT_VM.xml
Normal file
@ -0,0 +1,30 @@
|
||||
<acrn-config board="" scenario="">
|
||||
<vm id="0">
|
||||
<vm_type desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_RT_VM</vm_type>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag></guest_flag>
|
||||
</guest_flags>
|
||||
<vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
|
||||
<pcpu_id></pcpu_id>
|
||||
</vcpu_affinity>
|
||||
<clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned"></base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned"></size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address."></base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address."></base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to."></target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
30
misc/acrn-config/xmls/config-xmls/template/POST_STD_VM.xml
Normal file
30
misc/acrn-config/xmls/config-xmls/template/POST_STD_VM.xml
Normal file
@ -0,0 +1,30 @@
|
||||
<acrn-config board="" scenario="">
|
||||
<vm id="0">
|
||||
<vm_type desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_STD_VM</vm_type>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag></guest_flag>
|
||||
</guest_flags>
|
||||
<vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
|
||||
<pcpu_id></pcpu_id>
|
||||
</vcpu_affinity>
|
||||
<clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned"></base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned"></size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address."></base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address."></base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to."></target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
49
misc/acrn-config/xmls/config-xmls/template/PRE_STD_VM.xml
Normal file
49
misc/acrn-config/xmls/config-xmls/template/PRE_STD_VM.xml
Normal file
@ -0,0 +1,49 @@
|
||||
<acrn-config board="" scenario="">
|
||||
<vm id="0">
|
||||
<vm_type desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">PRE_STD_VM</vm_type>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list."></name>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag></guest_flag>
|
||||
</guest_flags>
|
||||
<vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
|
||||
<pcpu_id></pcpu_id>
|
||||
</vcpu_affinity>
|
||||
<clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned"></base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned"></size>
|
||||
</epc_section>
|
||||
<memory>
|
||||
<start_hpa desc="The start physical address in host for the VM"></start_hpa>
|
||||
<size desc="The memory size in Bytes for the VM"></size>
|
||||
<start_hpa2 desc="Start of second HPA for non-contiguous allocations in host for the VM"></start_hpa2>
|
||||
<size_hpa2 desc="Memory size of second HPA for non-contiguous allocations in Bytes for the VM"></size_hpa2>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code."></name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR."></kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline."></kern_mod>
|
||||
<ramdisk_mod desc="The tag for ramdisk image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline."></ramdisk_mod>
|
||||
<rootfs desc="rootfs for Linux kernel"></rootfs>
|
||||
<bootargs desc="Specify kernel boot arguments"></bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address."></base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to."></target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_devs configurable="0" desc="pci devices list">
|
||||
<pci_dev desc="pci device">00:17.0 SATA controller: Intel Corporation Device 9dd3 (rev 30)</pci_dev>
|
||||
<pci_dev desc="pci device">03:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)</pci_dev>
|
||||
</pci_devs>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
49
misc/acrn-config/xmls/config-xmls/template/SAFETY_VM.xml
Normal file
49
misc/acrn-config/xmls/config-xmls/template/SAFETY_VM.xml
Normal file
@ -0,0 +1,49 @@
|
||||
<acrn-config board="" scenario="">
|
||||
<vm id="0">
|
||||
<vm_type desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SAFETY_VM</vm_type>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list."></name>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag></guest_flag>
|
||||
</guest_flags>
|
||||
<vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
|
||||
<pcpu_id></pcpu_id>
|
||||
</vcpu_affinity>
|
||||
<clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned"></base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned"></size>
|
||||
</epc_section>
|
||||
<memory>
|
||||
<start_hpa desc="The start physical address in host for the VM"></start_hpa>
|
||||
<size desc="The memory size in Bytes for the VM"></size>
|
||||
<start_hpa2 configurable="0" desc="Start of second HPA for non-contiguous allocations in host for the VM">0x0</start_hpa2>
|
||||
<size_hpa2 configurable="0" desc="Memory size of second HPA for non-contiguous allocations in Bytes for the VM">0x0</size_hpa2>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code."></name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR."></kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline."></kern_mod>
|
||||
<ramdisk_mod desc="The tag for ramdisk image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline."></ramdisk_mod>
|
||||
<bootargs desc="Specify kernel boot arguments"></bootargs>
|
||||
<kern_load_addr desc="The loading address in host memory for the VM kernel"></kern_load_addr>
|
||||
<kern_entry_addr desc="The entry address in host memory for the VM kernel"></kern_entry_addr>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address."></base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address."></base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to."></target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_devs configurable="0" desc="pci devices list">
|
||||
<pci_dev desc="pci device"></pci_dev>
|
||||
</pci_devs>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
42
misc/acrn-config/xmls/config-xmls/template/SOS_VM.xml
Normal file
42
misc/acrn-config/xmls/config-xmls/template/SOS_VM.xml
Normal file
@ -0,0 +1,42 @@
|
||||
<acrn-config board="" scenario="">
|
||||
<vm id="0">
|
||||
<vm_type desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</vm_type>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list."></name>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag></guest_flag>
|
||||
</guest_flags>
|
||||
<clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
</clos>
|
||||
<memory>
|
||||
<start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
|
||||
<size configurable="0" desc="The memory size in Bytes for the VM">0x20000000</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
|
||||
<kern_type desc="Specify the VM name which will be shown in hypervisor console command: vm_list."></kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline."></kern_mod>
|
||||
<ramdisk_mod desc="The tag for ramdisk image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline."></ramdisk_mod>
|
||||
<bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address."></base>
|
||||
<irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to."></target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_devs configurable="0" desc="pci devices list">
|
||||
<pci_dev desc="pci device"></pci_dev>
|
||||
</pci_devs>
|
||||
<board_private>
|
||||
<rootfs desc="rootfs for Linux kernel"></rootfs>
|
||||
<bootargs desc="Specify kernel boot arguments"></bootargs>
|
||||
</board_private>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
Loading…
Reference in New Issue
Block a user