mirror of
https://github.com/projectacrn/acrn-hypervisor.git
synced 2025-09-17 23:08:07 +00:00
acrn-config: Reorg config tool folder
Remove vm_configs folder and move all the XML files and generic code example into config_tools/data Tracked-On: #5644 Signed-off-by: Xie, nanlin <nanlin.xie@intel.com>
This commit is contained in:
Xie, nanlin
wenlingz
210
misc/config_tools/data/whl-ipc-i7/hybrid.xml
Normal file
210
misc/config_tools/data/whl-ipc-i7/hybrid.xml
Normal file
@@ -0,0 +1,210 @@
|
||||
<acrn-config board="whl-ipc-i7" scenario="hybrid">
|
||||
<hv>
|
||||
<DEBUG_OPTIONS desc="Debug options for ACRN hypervisor, only valid on debug version">
|
||||
<RELEASE desc="Release build. 'y' for Release, 'n' for Debug.">n</RELEASE>
|
||||
<SERIAL_CONSOLE desc="The serial device which is used for hypervisor debug, only valid on Debug version.">/dev/ttyS0</SERIAL_CONSOLE>
|
||||
<MEM_LOGLEVEL desc="Default loglevel in memory">5</MEM_LOGLEVEL>
|
||||
<NPK_LOGLEVEL desc="Default loglevel for the hypervisor NPK log">5</NPK_LOGLEVEL>
|
||||
<CONSOLE_LOGLEVEL desc="Default loglevel on the serial console">3</CONSOLE_LOGLEVEL>
|
||||
<LOG_DESTINATION desc="Bitmap of consoles where logs are printed.">7</LOG_DESTINATION>
|
||||
<LOG_BUF_SIZE desc="Capacity of logbuf for each physical cpu.">0x40000</LOG_BUF_SIZE>
|
||||
</DEBUG_OPTIONS>
|
||||
|
||||
<FEATURES>
|
||||
<RELOC desc="Enable hypervisor relocation">y</RELOC>
|
||||
<SCHEDULER desc="The CPU scheduler to be used by the hypervisor.">SCHED_BVT</SCHEDULER>
|
||||
<MULTIBOOT2 desc="Support boot ACRN from multiboot2 protocol.">y</MULTIBOOT2>
|
||||
<RDT desc="Intel RDT (Resource Director Technology).">
|
||||
<RDT_ENABLED desc="Enable RDT">n</RDT_ENABLED>
|
||||
<CDP_ENABLED desc="CDP (Code and Data Prioritization). CDP is an extension of CAT.">n</CDP_ENABLED>
|
||||
</RDT>
|
||||
<HYPERV_ENABLED desc="Enable Hyper-V enlightenment">y</HYPERV_ENABLED>
|
||||
<IOMMU_ENFORCE_SNP desc="IOMMU enforce snoop behavior of DMA operation.">n</IOMMU_ENFORCE_SNP>
|
||||
<ACPI_PARSE_ENABLED desc="Enable ACPI runtime parsing.">y</ACPI_PARSE_ENABLED>
|
||||
<L1D_VMENTRY_ENABLED desc="Enable L1 cache flush before VM entry.">n</L1D_VMENTRY_ENABLED>
|
||||
<MCE_ON_PSC_DISABLED desc="Force to disable software workaround for Machine Check Error on Page Size Change.">n</MCE_ON_PSC_DISABLED>
|
||||
<IVSHMEM desc="IVSHMEM configuration">
|
||||
<IVSHMEM_ENABLED desc="Enable Share Memory between VMs by IVSHMEM.">n</IVSHMEM_ENABLED>
|
||||
<IVSHMEM_REGION desc="the shared memory region name (starting with hv:/, size (in MB), and IDs of all VMs (separated by a colon) sharing this region, for example hv:/sharename,2,0:2"></IVSHMEM_REGION>
|
||||
</IVSHMEM>
|
||||
</FEATURES>
|
||||
|
||||
<MEMORY>
|
||||
<STACK_SIZE desc="Capacity of one stack, in bytes.">0x2000</STACK_SIZE>
|
||||
<HV_RAM_SIZE desc="Size of the RAM region used by the hypervisor"></HV_RAM_SIZE>
|
||||
<HV_RAM_START desc="2M-aligned Start physical address of the RAM region used by the hypervisor."></HV_RAM_START>
|
||||
<LOW_RAM_SIZE desc="Size of the low RAM region">0x00010000</LOW_RAM_SIZE>
|
||||
<UOS_RAM_SIZE desc="Size of the User OS (UOS) RAM.">0x200000000</UOS_RAM_SIZE>
|
||||
<SOS_RAM_SIZE desc="Size of the Service OS (SOS) RAM.">0x400000000</SOS_RAM_SIZE>
|
||||
<PLATFORM_RAM_SIZE desc="Size of the physical platform RAM">0x400000000</PLATFORM_RAM_SIZE>
|
||||
</MEMORY>
|
||||
|
||||
<CAPACITIES desc="Capacity limits for static assigned data struct or maximum supported resouce">
|
||||
<IOMMU_BUS_NUM desc="Highest PCI bus ID used during IOMMU initialization.">0x100</IOMMU_BUS_NUM>
|
||||
<MAX_IR_ENTRIES desc="Maximum number of Interrupt Remapping Entries.">256</MAX_IR_ENTRIES>
|
||||
<MAX_IOAPIC_NUM desc="Maximum number of IO-APICs.">1</MAX_IOAPIC_NUM>
|
||||
<MAX_PCI_DEV_NUM desc="Maximum number of PCI devices.">96</MAX_PCI_DEV_NUM>
|
||||
<MAX_IOAPIC_LINES desc="Maximum number of interrupt lines per IOAPIC.">120</MAX_IOAPIC_LINES>
|
||||
<MAX_PT_IRQ_ENTRIES desc="Maximum number of interrupt source for PT devices.">64</MAX_PT_IRQ_ENTRIES>
|
||||
<MAX_MSIX_TABLE_NUM desc="Maximum number of MSI-X tables per device. Please leave it blank if not sure.">64</MAX_MSIX_TABLE_NUM>
|
||||
<MAX_EMULATED_MMIO desc="Maximum number of emulated MMIO regions.">16</MAX_EMULATED_MMIO>
|
||||
</CAPACITIES>
|
||||
|
||||
<MISC_CFG>
|
||||
<GPU_SBDF desc="Segment, Bus, Device, and function of the GPU.">0x00000010</GPU_SBDF>
|
||||
</MISC_CFG>
|
||||
</hv>
|
||||
|
||||
<vm id="0">
|
||||
<vm_type desc="Specify the VM type" readonly="true">SAFETY_VM</vm_type>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN PRE-LAUNCHED VM0</name>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<cpu_affinity desc="List of pCPU that this VM's vCPUs are pinned to.">
|
||||
<pcpu_id>3</pcpu_id>
|
||||
</cpu_affinity>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
</clos>
|
||||
<epc_section configurable="0" desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<memory>
|
||||
<start_hpa desc="The start physical address in host for the VM">0x100000000</start_hpa>
|
||||
<size desc="The memory size in Bytes for the VM">0x20000000</size>
|
||||
<start_hpa2 configurable="0" desc="Start of second HPA for non-contiguous allocations in host for the VM">0x0</start_hpa2>
|
||||
<size_hpa2 configurable="0" desc="Memory size of second HPA for non-contiguous allocations in Bytes for the VM">0x0</size_hpa2>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">Zephyr</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_ZEPHYR</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Zephyr_RawImage</kern_mod>
|
||||
<ramdisk_mod desc="The tag for ramdisk image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline."></ramdisk_mod>
|
||||
<bootargs desc="Specify kernel boot arguments">reboot=acpi</bootargs>
|
||||
<kern_load_addr desc="The loading address in host memory for the VM kernel">0x8000</kern_load_addr>
|
||||
<kern_entry_addr desc="The entry address in host memory for the VM kernel">0x8000</kern_entry_addr>
|
||||
</os_config>
|
||||
<legacy_vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</legacy_vuart>
|
||||
<legacy_vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</legacy_vuart>
|
||||
<console_vuart id="0">
|
||||
<base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
</console_vuart>
|
||||
<communication_vuart id="1">
|
||||
<base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
<target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
|
||||
</communication_vuart>
|
||||
<pci_devs desc="pci devices list">
|
||||
<pci_dev desc="pci device"></pci_dev>
|
||||
</pci_devs>
|
||||
<mmio_resources desc="mmio devices list to passthrough">
|
||||
<TPM2 desc="TPM2 device">n</TPM2>
|
||||
</mmio_resources>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<vm_type desc="Specify the VM type" readonly="true">SOS_VM</vm_type>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<cpu_affinity desc="List of pCPU that this VM's vCPUs are pinned to.">
|
||||
<pcpu_id>0</pcpu_id>
|
||||
<pcpu_id>1</pcpu_id>
|
||||
<pcpu_id>2</pcpu_id>
|
||||
</cpu_affinity>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
</clos>
|
||||
<memory>
|
||||
<start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
|
||||
<size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<ramdisk_mod desc="The tag for ramdisk image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline."></ramdisk_mod>
|
||||
<bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
|
||||
</os_config>
|
||||
<legacy_vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">SOS_COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
|
||||
</legacy_vuart>
|
||||
<legacy_vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">SOS_COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</legacy_vuart>
|
||||
<console_vuart id="0">
|
||||
<base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
</console_vuart>
|
||||
<communication_vuart id="1">
|
||||
<base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
<target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
|
||||
</communication_vuart>
|
||||
<pci_devs configurable="0" desc="pci devices list">
|
||||
<pci_dev desc="pci device"></pci_dev>
|
||||
</pci_devs>
|
||||
<board_private>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
|
||||
i915.nuclear_pageflip=1 hvlog=2M@0xe00000 memmap=0x200000$0xe00000
|
||||
</bootargs>
|
||||
</board_private>
|
||||
</vm>
|
||||
<vm id="2">
|
||||
<vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<cpu_affinity desc="List of pCPU: the guest VM is allowed to create vCPU from all or a subset of this list.">
|
||||
<pcpu_id>2</pcpu_id>
|
||||
</cpu_affinity>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
</clos>
|
||||
<epc_section configurable="0" desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<legacy_vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</legacy_vuart>
|
||||
<legacy_vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
|
||||
</legacy_vuart>
|
||||
<console_vuart id="0">
|
||||
<base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
</console_vuart>
|
||||
<communication_vuart id="1">
|
||||
<base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
<target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
|
||||
</communication_vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
251
misc/config_tools/data/whl-ipc-i7/hybrid_rt.xml
Normal file
251
misc/config_tools/data/whl-ipc-i7/hybrid_rt.xml
Normal file
@@ -0,0 +1,251 @@
|
||||
<acrn-config board="whl-ipc-i7" scenario="hybrid_rt">
|
||||
<hv>
|
||||
<DEBUG_OPTIONS desc="Debug options for ACRN hypervisor, only valid on debug version">
|
||||
<RELEASE desc="Release build. 'y' for Release, 'n' for Debug.">n</RELEASE>
|
||||
<SERIAL_CONSOLE desc="The serial device which is used for hypervisor debug, only valid on Debug version.">/dev/ttyS0</SERIAL_CONSOLE>
|
||||
<MEM_LOGLEVEL desc="Default loglevel in memory">5</MEM_LOGLEVEL>
|
||||
<NPK_LOGLEVEL desc="Default loglevel for the hypervisor NPK log">5</NPK_LOGLEVEL>
|
||||
<CONSOLE_LOGLEVEL desc="Default loglevel on the serial console">3</CONSOLE_LOGLEVEL>
|
||||
<LOG_DESTINATION desc="Bitmap of consoles where logs are printed.">7</LOG_DESTINATION>
|
||||
<LOG_BUF_SIZE desc="Capacity of logbuf for each physical cpu.">0x40000</LOG_BUF_SIZE>
|
||||
</DEBUG_OPTIONS>
|
||||
|
||||
<FEATURES>
|
||||
<RELOC desc="Enable hypervisor relocation">y</RELOC>
|
||||
<SCHEDULER desc="The CPU scheduler to be used by the hypervisor.">SCHED_BVT</SCHEDULER>
|
||||
<MULTIBOOT2 desc="Support boot ACRN from multiboot2 protocol.">y</MULTIBOOT2>
|
||||
<RDT desc="Intel RDT (Resource Director Technology).">
|
||||
<RDT_ENABLED desc="Enable RDT">n</RDT_ENABLED>
|
||||
<CDP_ENABLED desc="CDP (Code and Data Prioritization). CDP is an extension of CAT.">n</CDP_ENABLED>
|
||||
</RDT>
|
||||
<HYPERV_ENABLED desc="Enable Hyper-V enlightenment">y</HYPERV_ENABLED>
|
||||
<IOMMU_ENFORCE_SNP desc="IOMMU enforce snoop behavior of DMA operation.">n</IOMMU_ENFORCE_SNP>
|
||||
<ACPI_PARSE_ENABLED desc="Enable ACPI runtime parsing.">y</ACPI_PARSE_ENABLED>
|
||||
<L1D_VMENTRY_ENABLED desc="Enable L1 cache flush before VM entry.">n</L1D_VMENTRY_ENABLED>
|
||||
<MCE_ON_PSC_DISABLED desc="Force to disable software workaround for Machine Check Error on Page Size Change.">n</MCE_ON_PSC_DISABLED>
|
||||
<IVSHMEM desc="IVSHMEM configuration">
|
||||
<IVSHMEM_ENABLED desc="Enable Share Memory between VMs by IVSHMEM.">y</IVSHMEM_ENABLED>
|
||||
<IVSHMEM_REGION desc="the shared memory region name (starting with hv:/, size (in MB), and IDs of all VMs (separated by a colon) sharing this region, for example hv:/sharename,2,0:2">hv:/shm_region_0, 2, 0:2</IVSHMEM_REGION>
|
||||
</IVSHMEM>
|
||||
</FEATURES>
|
||||
|
||||
<MEMORY>
|
||||
<STACK_SIZE desc="Capacity of one stack, in bytes.">0x2000</STACK_SIZE>
|
||||
<HV_RAM_SIZE desc="Size of the RAM region used by the hypervisor"></HV_RAM_SIZE>
|
||||
<HV_RAM_START desc="2M-aligned Start physical address of the RAM region used by the hypervisor."></HV_RAM_START>
|
||||
<LOW_RAM_SIZE desc="Size of the low RAM region">0x00010000</LOW_RAM_SIZE>
|
||||
<UOS_RAM_SIZE desc="Size of the User OS (UOS) RAM.">0x200000000</UOS_RAM_SIZE>
|
||||
<SOS_RAM_SIZE desc="Size of the Service OS (SOS) RAM.">0x400000000</SOS_RAM_SIZE>
|
||||
<PLATFORM_RAM_SIZE desc="Size of the physical platform RAM">0x400000000</PLATFORM_RAM_SIZE>
|
||||
</MEMORY>
|
||||
|
||||
<CAPACITIES desc="Capacity limits for static assigned data struct or maximum supported resouce">
|
||||
<IOMMU_BUS_NUM desc="Highest PCI bus ID used during IOMMU initialization.">0x100</IOMMU_BUS_NUM>
|
||||
<MAX_IR_ENTRIES desc="Maximum number of Interrupt Remapping Entries.">256</MAX_IR_ENTRIES>
|
||||
<MAX_IOAPIC_NUM desc="Maximum number of IO-APICs.">1</MAX_IOAPIC_NUM>
|
||||
<MAX_PCI_DEV_NUM desc="Maximum number of PCI devices.">96</MAX_PCI_DEV_NUM>
|
||||
<MAX_IOAPIC_LINES desc="Maximum number of interrupt lines per IOAPIC.">120</MAX_IOAPIC_LINES>
|
||||
<MAX_PT_IRQ_ENTRIES desc="Maximum number of interrupt source for PT devices.">64</MAX_PT_IRQ_ENTRIES>
|
||||
<MAX_MSIX_TABLE_NUM desc="Maximum number of MSI-X tables per device. Please leave it blank if not sure.">64</MAX_MSIX_TABLE_NUM>
|
||||
<MAX_EMULATED_MMIO desc="Maximum number of emulated MMIO regions.">16</MAX_EMULATED_MMIO>
|
||||
</CAPACITIES>
|
||||
|
||||
<MISC_CFG>
|
||||
<GPU_SBDF desc="Segment, Bus, Device, and function of the GPU.">0x00000010</GPU_SBDF>
|
||||
</MISC_CFG>
|
||||
</hv>
|
||||
|
||||
<vm id="0">
|
||||
<vm_type desc="Specify the VM type" readonly="true">PRE_RT_VM</vm_type>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN PRE-LAUNCHED VM0</name>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>GUEST_FLAG_LAPIC_PASSTHROUGH</guest_flag>
|
||||
<guest_flag>GUEST_FLAG_RT</guest_flag>
|
||||
</guest_flags>
|
||||
<cpu_affinity desc="List of pCPU that this VM's vCPUs are pinned to.">
|
||||
<pcpu_id>2</pcpu_id>
|
||||
<pcpu_id>3</pcpu_id>
|
||||
</cpu_affinity>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
</clos>
|
||||
<epc_section configurable="0" desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<memory>
|
||||
<start_hpa desc="The start physical address in host for the VM">0x100000000</start_hpa>
|
||||
<size desc="The memory size in Bytes for the VM">0x40000000</size>
|
||||
<start_hpa2 configurable="0" desc="Start of second HPA for non-contiguous allocations in host for the VM">0x0</start_hpa2>
|
||||
<size_hpa2 configurable="0" desc="Memory size of second HPA for non-contiguous allocations in Bytes for the VM">0x0</size_hpa2>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">PREEMPT-RT</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">RT_bzImage</kern_mod>
|
||||
<ramdisk_mod desc="The tag for ramdisk image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline."></ramdisk_mod>
|
||||
<bootargs desc="Specify kernel boot arguments">rw rootwait root=/dev/sda3 rootfstype=ext4 console=ttyS0,115200 console=tty0 rw nohpet console=hvc0 no_timer_check ignore_loglevel log_buf_len=16M consoleblank=0 tsc=reliable
|
||||
clocksource=tsc x2apic_phys processor.max_cstate=0 intel_idle.max_cstate=0 intel_pstate=disable mce=ignore_ce audit=0 isolcpus=nohz,domain,1 nohz_full=1 rcu_nocbs=1 nosoftlockup idle=poll irqaffinity=0 no_ipi_broadcast=1
|
||||
reboot=acpi
|
||||
</bootargs>
|
||||
</os_config>
|
||||
<legacy_vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</legacy_vuart>
|
||||
<legacy_vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</legacy_vuart>
|
||||
<console_vuart id="0">
|
||||
<base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
</console_vuart>
|
||||
<communication_vuart id="1">
|
||||
<base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
<target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
|
||||
</communication_vuart>
|
||||
<pci_devs desc="pci devices list">
|
||||
<pci_dev desc="pci device">00:17.0 SATA controller: Intel Corporation Device 9dd3 (rev 30)</pci_dev>
|
||||
<pci_dev desc="pci device">03:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)</pci_dev>
|
||||
</pci_devs>
|
||||
<mmio_resources desc="mmio devices list to passthrough">
|
||||
<TPM2 desc="TPM2 device">y</TPM2>
|
||||
</mmio_resources>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<vm_type desc="Specify the VM type" readonly="true">SOS_VM</vm_type>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<cpu_affinity desc="List of pCPU that this VM's vCPUs are pinned to.">
|
||||
<pcpu_id>0</pcpu_id>
|
||||
<pcpu_id>1</pcpu_id>
|
||||
</cpu_affinity>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
</clos>
|
||||
<memory>
|
||||
<start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
|
||||
<size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<ramdisk_mod desc="The tag for ramdisk image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline."></ramdisk_mod>
|
||||
<bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
|
||||
</os_config>
|
||||
<legacy_vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">SOS_COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
|
||||
</legacy_vuart>
|
||||
<legacy_vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">SOS_COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</legacy_vuart>
|
||||
<console_vuart id="0">
|
||||
<base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
</console_vuart>
|
||||
<communication_vuart id="1">
|
||||
<base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
<target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
|
||||
</communication_vuart>
|
||||
<pci_devs configurable="0" desc="pci devices list">
|
||||
<pci_dev desc="pci device"></pci_dev>
|
||||
</pci_devs>
|
||||
<board_private>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/nvme0n1p3</rootfs>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
|
||||
i915.nuclear_pageflip=1 hvlog=2M@0xe00000 memmap=0x200000$0xe00000
|
||||
</bootargs>
|
||||
</board_private>
|
||||
</vm>
|
||||
<vm id="2">
|
||||
<vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<cpu_affinity desc="List of pCPU: the guest VM is allowed to create vCPU from all or a subset of this list.">
|
||||
<pcpu_id>0</pcpu_id>
|
||||
<pcpu_id>1</pcpu_id>
|
||||
</cpu_affinity>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
</clos>
|
||||
<epc_section configurable="0" desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<legacy_vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</legacy_vuart>
|
||||
<legacy_vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
|
||||
</legacy_vuart>
|
||||
<console_vuart id="0">
|
||||
<base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
</console_vuart>
|
||||
<communication_vuart id="1">
|
||||
<base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
<target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
|
||||
</communication_vuart>
|
||||
</vm>
|
||||
<vm id="3">
|
||||
<vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<cpu_affinity desc="List of pCPU: the guest VM is allowed to create vCPU from all or a subset of this list.">
|
||||
<pcpu_id>1</pcpu_id>
|
||||
</cpu_affinity>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
</clos>
|
||||
<epc_section configurable="0" desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<legacy_vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</legacy_vuart>
|
||||
<legacy_vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
|
||||
</legacy_vuart>
|
||||
<console_vuart id="0">
|
||||
<base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
</console_vuart>
|
||||
<communication_vuart id="1">
|
||||
<base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
<target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
|
||||
</communication_vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
@@ -0,0 +1,43 @@
|
||||
<acrn-config board="whl-ipc-i7" scenario="hybrid_rt" uos_launcher="1">
|
||||
<uos id="1">
|
||||
<uos_type desc="UOS type">WINDOWS</uos_type>
|
||||
<rtos_type desc="UOS Realtime capability">no</rtos_type>
|
||||
<mem_size desc="UOS memory size in MByte">4096</mem_size>
|
||||
<gvt_args desc="GVT settings. Set it to gvtd for GVTd, otherwise is GVTg arguments. The recommendation arguments for GVTg is 64 448 8. Leave it blank to disable GVT.">gvtd</gvt_args>
|
||||
<vbootloader desc="virtual bootloader method" readonly="true">ovmf</vbootloader>
|
||||
<vuart0 desc="vUART0 which emulated by device model">Enable</vuart0>
|
||||
<poweroff_channel desc="the method of power off uos"></poweroff_channel>
|
||||
<usb_xhci desc="USB xHCI mediator configuration. input format: bus#-port#[:bus#-port#: ...]. e.g.: 1-2:2-4"></usb_xhci>
|
||||
<cpu_affinity desc="List of pCPU that this VM's vCPUs are pinned to.">
|
||||
<pcpu_id></pcpu_id>
|
||||
</cpu_affinity>
|
||||
<shm_regions desc="List of shared memrory regions for inter-VM communication.">
|
||||
<shm_region desc="configure the shm regions for current VM, formated as hv:/shm_region_0,2097152"></shm_region>
|
||||
</shm_regions>
|
||||
<console_vuart desc="A PCI based console vuart which is emulated by device model">Disable</console_vuart>
|
||||
<communication_vuarts desc="List of PCI based communication vuarts which are emulated by device model">
|
||||
<communication_vuart></communication_vuart>
|
||||
</communication_vuarts>
|
||||
<passthrough_devices>
|
||||
<usb_xdci desc="vm usb_xdci device"></usb_xdci>
|
||||
<audio desc="vm audio device">00:1f.3 Audio device: Intel Corporation Device 9dc8 (rev 30)</audio>
|
||||
<audio_codec desc="vm audio codec device"></audio_codec>
|
||||
<ipu desc="vm ipu device"></ipu>
|
||||
<ipu_i2c desc="vm ipu_i2c device"></ipu_i2c>
|
||||
<cse desc="vm cse device"></cse>
|
||||
<wifi desc="vm wifi device"></wifi>
|
||||
<bluetooth desc="vm bluetooth"></bluetooth>
|
||||
<sd_card desc="vm sd card device"></sd_card>
|
||||
<ethernet desc="vm ethernet device"></ethernet>
|
||||
<sata desc="vm sata device"></sata>
|
||||
<nvme desc="vm nvme device"></nvme>
|
||||
</passthrough_devices>
|
||||
|
||||
<virtio_devices>
|
||||
<network desc="virtio network devices setting. Input format: tap_name,[vhost],[mac=XX:XX:XX:XX:XX:XX].">WaaG</network>
|
||||
<input desc="virtio input device"></input>
|
||||
<block desc="virtio block device setting. format: [blk partition:][img path] e.g.: /dev/sda3:./a/b.img">./win10-ltsc.img</block>
|
||||
<console desc="virtio console device,input format: [@]stdio|tty|pty|sock:portname[=portpath][,[@]stdio|tty|pty:portname[=portpath]]"></console>
|
||||
</virtio_devices>
|
||||
</uos>
|
||||
</acrn-config>
|
||||
372
misc/config_tools/data/whl-ipc-i7/industry.xml
Normal file
372
misc/config_tools/data/whl-ipc-i7/industry.xml
Normal file
@@ -0,0 +1,372 @@
|
||||
<acrn-config board="whl-ipc-i7" scenario="industry">
|
||||
<hv>
|
||||
<DEBUG_OPTIONS desc="Debug options for ACRN hypervisor, only valid on debug version">
|
||||
<RELEASE desc="Release build. 'y' for Release, 'n' for Debug.">n</RELEASE>
|
||||
<SERIAL_CONSOLE desc="The serial device which is used for hypervisor debug, only valid on Debug version.">/dev/ttyS0</SERIAL_CONSOLE>
|
||||
<MEM_LOGLEVEL desc="Default loglevel in memory">5</MEM_LOGLEVEL>
|
||||
<NPK_LOGLEVEL desc="Default loglevel for the hypervisor NPK log">5</NPK_LOGLEVEL>
|
||||
<CONSOLE_LOGLEVEL desc="Default loglevel on the serial console">3</CONSOLE_LOGLEVEL>
|
||||
<LOG_DESTINATION desc="Bitmap of consoles where logs are printed.">7</LOG_DESTINATION>
|
||||
<LOG_BUF_SIZE desc="Capacity of logbuf for each physical cpu.">0x40000</LOG_BUF_SIZE>
|
||||
</DEBUG_OPTIONS>
|
||||
|
||||
<FEATURES>
|
||||
<RELOC desc="Enable hypervisor relocation">y</RELOC>
|
||||
<SCHEDULER desc="The CPU scheduler to be used by the hypervisor.">SCHED_BVT</SCHEDULER>
|
||||
<MULTIBOOT2 desc="Support boot ACRN from multiboot2 protocol.">y</MULTIBOOT2>
|
||||
<RDT desc="Intel RDT (Resource Director Technology).">
|
||||
<RDT_ENABLED desc="Enable RDT">n</RDT_ENABLED>
|
||||
<CDP_ENABLED desc="CDP (Code and Data Prioritization). CDP is an extension of CAT.">n</CDP_ENABLED>
|
||||
</RDT>
|
||||
<HYPERV_ENABLED desc="Enable Hyper-V enlightenment">y</HYPERV_ENABLED>
|
||||
<IOMMU_ENFORCE_SNP desc="IOMMU enforce snoop behavior of DMA operation.">n</IOMMU_ENFORCE_SNP>
|
||||
<ACPI_PARSE_ENABLED desc="Enable ACPI runtime parsing.">y</ACPI_PARSE_ENABLED>
|
||||
<L1D_VMENTRY_ENABLED desc="Enable L1 cache flush before VM entry.">n</L1D_VMENTRY_ENABLED>
|
||||
<MCE_ON_PSC_DISABLED desc="Force to disable software workaround for Machine Check Error on Page Size Change.">n</MCE_ON_PSC_DISABLED>
|
||||
<IVSHMEM desc="IVSHMEM configuration">
|
||||
<IVSHMEM_ENABLED desc="Enable Share Memory between VMs by IVSHMEM.">n</IVSHMEM_ENABLED>
|
||||
<IVSHMEM_REGION desc="the shared memory region name (starting with hv:/, size (in MB), and IDs of all VMs (separated by a colon) sharing this region, for example hv:/sharename,2,0:2"></IVSHMEM_REGION>
|
||||
</IVSHMEM>
|
||||
</FEATURES>
|
||||
|
||||
<MEMORY>
|
||||
<STACK_SIZE desc="Capacity of one stack, in bytes.">0x2000</STACK_SIZE>
|
||||
<HV_RAM_SIZE desc="Size of the RAM region used by the hypervisor"></HV_RAM_SIZE>
|
||||
<HV_RAM_START desc="2M-aligned Start physical address of the RAM region used by the hypervisor."></HV_RAM_START>
|
||||
<LOW_RAM_SIZE desc="Size of the low RAM region">0x00010000</LOW_RAM_SIZE>
|
||||
<UOS_RAM_SIZE desc="Size of the User OS (UOS) RAM.">0x200000000</UOS_RAM_SIZE>
|
||||
<SOS_RAM_SIZE desc="Size of the Service OS (SOS) RAM.">0x400000000</SOS_RAM_SIZE>
|
||||
<PLATFORM_RAM_SIZE desc="Size of the physical platform RAM">0x400000000</PLATFORM_RAM_SIZE>
|
||||
</MEMORY>
|
||||
|
||||
<CAPACITIES desc="Capacity limits for static assigned data struct or maximum supported resouce">
|
||||
<IOMMU_BUS_NUM desc="Highest PCI bus ID used during IOMMU initialization.">0x100</IOMMU_BUS_NUM>
|
||||
<MAX_IR_ENTRIES desc="Maximum number of Interrupt Remapping Entries.">256</MAX_IR_ENTRIES>
|
||||
<MAX_IOAPIC_NUM desc="Maximum number of IO-APICs.">1</MAX_IOAPIC_NUM>
|
||||
<MAX_PCI_DEV_NUM desc="Maximum number of PCI devices.">96</MAX_PCI_DEV_NUM>
|
||||
<MAX_IOAPIC_LINES desc="Maximum number of interrupt lines per IOAPIC.">120</MAX_IOAPIC_LINES>
|
||||
<MAX_PT_IRQ_ENTRIES desc="Maximum number of interrupt source for PT devices.">64</MAX_PT_IRQ_ENTRIES>
|
||||
<MAX_MSIX_TABLE_NUM desc="Maximum number of MSI-X tables per device. Please leave it blank if not sure.">64</MAX_MSIX_TABLE_NUM>
|
||||
<MAX_EMULATED_MMIO desc="Maximum number of emulated MMIO regions.">16</MAX_EMULATED_MMIO>
|
||||
</CAPACITIES>
|
||||
|
||||
<MISC_CFG>
|
||||
<GPU_SBDF desc="Segment, Bus, Device, and function of the GPU.">0x00000010</GPU_SBDF>
|
||||
</MISC_CFG>
|
||||
</hv>
|
||||
|
||||
<vm id="0">
|
||||
<vm_type desc="Specify the VM type" readonly="true">SOS_VM</vm_type>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
</clos>
|
||||
<memory>
|
||||
<start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
|
||||
<size configurable="0" desc="The memory size in Bytes for the VM">0x20000000</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
|
||||
<kern_type desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<ramdisk_mod desc="The tag for ramdisk image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline."></ramdisk_mod>
|
||||
<bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
|
||||
</os_config>
|
||||
<legacy_vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">SOS_COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
|
||||
</legacy_vuart>
|
||||
<legacy_vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">SOS_COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">2</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</legacy_vuart>
|
||||
<console_vuart id="0">
|
||||
<base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
</console_vuart>
|
||||
<communication_vuart id="1">
|
||||
<base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
<target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
|
||||
</communication_vuart>
|
||||
<pci_devs configurable="0" desc="pci devices list">
|
||||
<pci_dev desc="pci device"></pci_dev>
|
||||
</pci_devs>
|
||||
<board_private>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
|
||||
i915.nuclear_pageflip=1 hvlog=2M@0xe00000 memmap=0x200000$0xe00000
|
||||
</bootargs>
|
||||
</board_private>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<cpu_affinity desc="List of pCPU: the guest VM is allowed to create vCPU from all or a subset of this list.">
|
||||
<pcpu_id>0</pcpu_id>
|
||||
<pcpu_id>1</pcpu_id>
|
||||
</cpu_affinity>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
</clos>
|
||||
<epc_section configurable="0" desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<legacy_vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</legacy_vuart>
|
||||
<legacy_vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</legacy_vuart>
|
||||
<console_vuart id="0">
|
||||
<base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
</console_vuart>
|
||||
<communication_vuart id="1">
|
||||
<base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
<target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
|
||||
</communication_vuart>
|
||||
</vm>
|
||||
<vm id="2">
|
||||
<vm_type desc="Specify the VM type" readonly="true">POST_RT_VM</vm_type>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<cpu_affinity desc="List of pCPU: the guest VM is allowed to create vCPU from all or a subset of this list.">
|
||||
<pcpu_id>2</pcpu_id>
|
||||
<pcpu_id>3</pcpu_id>
|
||||
</cpu_affinity>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
</clos>
|
||||
<epc_section configurable="0" desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<legacy_vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</legacy_vuart>
|
||||
<legacy_vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</legacy_vuart>
|
||||
<console_vuart id="0">
|
||||
<base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
</console_vuart>
|
||||
<communication_vuart id="1">
|
||||
<base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
<target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
|
||||
</communication_vuart>
|
||||
</vm>
|
||||
<vm id="3">
|
||||
<vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<cpu_affinity desc="List of pCPU: the guest VM is allowed to create vCPU from all or a subset of this list.">
|
||||
<pcpu_id>0</pcpu_id>
|
||||
<pcpu_id>1</pcpu_id>
|
||||
</cpu_affinity>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
</clos>
|
||||
<epc_section configurable="0" desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<legacy_vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</legacy_vuart>
|
||||
<legacy_vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</legacy_vuart>
|
||||
<console_vuart id="0">
|
||||
<base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
</console_vuart>
|
||||
<communication_vuart id="1">
|
||||
<base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
<target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
|
||||
</communication_vuart>
|
||||
</vm>
|
||||
<vm id="4">
|
||||
<vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<cpu_affinity desc="List of pCPU: the guest VM is allowed to create vCPU from all or a subset of this list.">
|
||||
<pcpu_id>0</pcpu_id>
|
||||
<pcpu_id>1</pcpu_id>
|
||||
</cpu_affinity>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
</clos>
|
||||
<epc_section configurable="0" desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<legacy_vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</legacy_vuart>
|
||||
<legacy_vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</legacy_vuart>
|
||||
<console_vuart id="0">
|
||||
<base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
</console_vuart>
|
||||
<communication_vuart id="1">
|
||||
<base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
<target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
|
||||
</communication_vuart>
|
||||
</vm>
|
||||
<vm id="5">
|
||||
<vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<cpu_affinity desc="List of pCPU: the guest VM is allowed to create vCPU from all or a subset of this list.">
|
||||
<pcpu_id>0</pcpu_id>
|
||||
<pcpu_id>1</pcpu_id>
|
||||
</cpu_affinity>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
</clos>
|
||||
<epc_section configurable="0" desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<legacy_vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</legacy_vuart>
|
||||
<legacy_vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</legacy_vuart>
|
||||
<console_vuart id="0">
|
||||
<base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
</console_vuart>
|
||||
<communication_vuart id="1">
|
||||
<base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
<target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
|
||||
</communication_vuart>
|
||||
</vm>
|
||||
<vm id="6">
|
||||
<vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<cpu_affinity desc="List of pCPU: the guest VM is allowed to create vCPU from all or a subset of this list.">
|
||||
<pcpu_id>0</pcpu_id>
|
||||
<pcpu_id>1</pcpu_id>
|
||||
</cpu_affinity>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
</clos>
|
||||
<epc_section configurable="0" desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<legacy_vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</legacy_vuart>
|
||||
<legacy_vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</legacy_vuart>
|
||||
<console_vuart id="0">
|
||||
<base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
</console_vuart>
|
||||
<communication_vuart id="1">
|
||||
<base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
<target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
|
||||
</communication_vuart>
|
||||
</vm>
|
||||
<vm id="7" configurable="1" desc="specific for Kata">
|
||||
<vm_type readonly="true" desc="Specify the VM type">KATA_VM</vm_type>
|
||||
<cpu_affinity desc="List of pCPU: the guest VM is allowed to create vCPU from all or a subset of this list.">
|
||||
<pcpu_id>0</pcpu_id>
|
||||
<pcpu_id>1</pcpu_id>
|
||||
</cpu_affinity>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
</clos>
|
||||
<epc_section configurable="0" desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<legacy_vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base configurable="0" desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</legacy_vuart>
|
||||
<legacy_vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base configurable="0" desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
|
||||
</legacy_vuart>
|
||||
<console_vuart id="0">
|
||||
<base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
</console_vuart>
|
||||
<communication_vuart id="1">
|
||||
<base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
<target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
|
||||
</communication_vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
@@ -0,0 +1,43 @@
|
||||
<acrn-config board="whl-ipc-i7" scenario="industry" uos_launcher="1">
|
||||
<uos id="2">
|
||||
<uos_type desc="UOS type">PREEMPT-RT LINUX</uos_type>
|
||||
<rtos_type desc="UOS Realtime capability">Hard RT</rtos_type>
|
||||
<mem_size desc="UOS memory size in MByte">1024</mem_size>
|
||||
<gvt_args configurable="0" desc="GVT settings. Set it to gvtd for GVTd, otherwise is GVTg arguments. The recommendation arguments for GVTg is 64 448 8. Leave it blank to disable GVT."></gvt_args>
|
||||
<vbootloader desc="virtual bootloader method" readonly="true">ovmf</vbootloader>
|
||||
<vuart0 desc="vUART0 which emulated by device model">Disable</vuart0>
|
||||
<poweroff_channel desc="the method of power off uos">vuart1(tty)</poweroff_channel>
|
||||
<usb_xhci desc="USB xHCI mediator configuration. input format: bus#-port#[:bus#-port#: ...]. e.g.: 1-2:2-4"></usb_xhci>
|
||||
<cpu_affinity desc="List of pCPU that this VM's vCPUs are pinned to.">
|
||||
<pcpu_id></pcpu_id>
|
||||
</cpu_affinity>
|
||||
<shm_regions desc="List of shared memory regions for inter-VM communication.">
|
||||
<shm_region desc="configure the shm regions for current VM, for example hv:/sharename,2"></shm_region>
|
||||
</shm_regions>
|
||||
<console_vuart desc="A PCI based console vuart which is emulated by device model">Disable</console_vuart>
|
||||
<communication_vuarts desc="List of PCI based communication vuarts which are emulated by device model">
|
||||
<communication_vuart></communication_vuart>
|
||||
</communication_vuarts>
|
||||
<passthrough_devices>
|
||||
<usb_xdci desc="vm usb_xdci device"></usb_xdci>
|
||||
<audio desc="vm audio device"></audio>
|
||||
<audio_codec desc="vm audio codec device"></audio_codec>
|
||||
<ipu desc="vm ipu device"></ipu>
|
||||
<ipu_i2c desc="vm ipu_i2c device"></ipu_i2c>
|
||||
<cse desc="vm cse device"></cse>
|
||||
<wifi desc="vm wifi device"></wifi>
|
||||
<bluetooth desc="vm bluetooth"></bluetooth>
|
||||
<sd_card desc="vm sd card device"></sd_card>
|
||||
<ethernet desc="vm ethernet device"></ethernet>
|
||||
<sata desc="vm sata device"></sata>
|
||||
<nvme desc="vm nvme device">02:00.0 Non-Volatile memory controller: Silicon Motion, Inc. Device 2263 (rev 03)</nvme>
|
||||
</passthrough_devices>
|
||||
|
||||
<virtio_devices>
|
||||
<network desc="virtio network devices setting. Input format: tap_name,[vhost],[mac=XX:XX:XX:XX:XX:XX]."></network>
|
||||
<input desc="virtio input device"></input>
|
||||
<block desc="virtio block device setting. format: [blk partition:][img path] e.g.: /dev/sda3:./a/b.img"></block>
|
||||
<console desc="virtio console device,input format: [@]stdio|tty|pty|sock:portname[=portpath][,[@]stdio|tty|pty:portname[=portpath]]">@stdio:stdio_port</console>
|
||||
</virtio_devices>
|
||||
</uos>
|
||||
</acrn-config>
|
||||
@@ -0,0 +1,43 @@
|
||||
<acrn-config board="whl-ipc-i7" scenario="industry" uos_launcher="1">
|
||||
<uos id="1">
|
||||
<uos_type desc="UOS type">VXWORKS</uos_type>
|
||||
<rtos_type desc="UOS Realtime capability">Hard RT</rtos_type>
|
||||
<mem_size desc="UOS memory size in MByte">2048</mem_size>
|
||||
<gvt_args desc="GVT settings. Set it to gvtd for GVTd, otherwise is GVTg arguments. The recommendation arguments for GVTg is 64 448 8. Leave it blank to disable GVT."></gvt_args>
|
||||
<vbootloader desc="virtual bootloader method" readonly="true">ovmf</vbootloader>
|
||||
<vuart0 desc="vUART0 which emulated by device model">Disable</vuart0>
|
||||
<poweroff_channel desc="the method of power off uos"></poweroff_channel>
|
||||
<usb_xhci desc="USB xHCI mediator configuration. input format: bus#-port#[:bus#-port#: ...]. e.g.: 1-2:2-4"></usb_xhci>
|
||||
<cpu_affinity desc="List of pCPU that this VM's vCPUs are pinned to.">
|
||||
<pcpu_id></pcpu_id>
|
||||
</cpu_affinity>
|
||||
<shm_regions desc="List of shared memory regions for inter-VM communication.">
|
||||
<shm_region desc="configure the shm regions for current VM, for example hv:/sharename,2"></shm_region>
|
||||
</shm_regions>
|
||||
<console_vuart desc="A PCI based console vuart which is emulated by device model">Disable</console_vuart>
|
||||
<communication_vuarts desc="List of PCI based communication vuarts which are emulated by device model">
|
||||
<communication_vuart></communication_vuart>
|
||||
</communication_vuarts>
|
||||
<passthrough_devices>
|
||||
<usb_xdci desc="vm usb_xdci device"></usb_xdci>
|
||||
<audio desc="vm audio device"></audio>
|
||||
<audio_codec desc="vm audio codec device"></audio_codec>
|
||||
<ipu desc="vm ipu device"></ipu>
|
||||
<ipu_i2c desc="vm ipu_i2c device"></ipu_i2c>
|
||||
<cse desc="vm cse device"></cse>
|
||||
<wifi desc="vm wifi device"></wifi>
|
||||
<bluetooth desc="vm bluetooth"></bluetooth>
|
||||
<sd_card desc="vm sd card device"></sd_card>
|
||||
<ethernet desc="vm ethernet device"></ethernet>
|
||||
<sata desc="vm sata device"></sata>
|
||||
<nvme desc="vm nvme device"></nvme>
|
||||
</passthrough_devices>
|
||||
|
||||
<virtio_devices>
|
||||
<network desc="virtio network devices setting. Input format: tap_name,[vhost],[mac=XX:XX:XX:XX:XX:XX]."></network>
|
||||
<input desc="virtio input device"></input>
|
||||
<block desc="virtio block device setting. format: [blk partition:][img path] e.g.: /dev/sda3:./a/b.img">./VxWorks.img</block>
|
||||
<console desc="virtio console device,input format: [@]stdio|tty|pty|sock:portname[=portpath][,[@]stdio|tty|pty:portname[=portpath]]">@stdio:stdio_port</console>
|
||||
</virtio_devices>
|
||||
</uos>
|
||||
</acrn-config>
|
||||
@@ -0,0 +1,43 @@
|
||||
<acrn-config board="whl-ipc-i7" scenario="industry" uos_launcher="1">
|
||||
<uos id="1">
|
||||
<uos_type desc="UOS type">WINDOWS</uos_type>
|
||||
<rtos_type desc="UOS Realtime capability">no</rtos_type>
|
||||
<mem_size desc="UOS memory size in MByte">4096</mem_size>
|
||||
<gvt_args desc="GVT settings. Set it to gvtd for GVTd, otherwise is GVTg arguments. The recommendation arguments for GVTg is 64 448 8. Leave it blank to disable GVT.">gvtd</gvt_args>
|
||||
<vbootloader desc="virtual bootloader method" readonly="true">ovmf</vbootloader>
|
||||
<vuart0 desc="vUART0 which emulated by device model">Enable</vuart0>
|
||||
<poweroff_channel desc="the method of power off uos"></poweroff_channel>
|
||||
<usb_xhci desc="USB xHCI mediator configuration. input format: bus#-port#[:bus#-port#: ...]. e.g.: 1-2:2-4"></usb_xhci>
|
||||
<cpu_affinity desc="List of pCPU that this VM's vCPUs are pinned to.">
|
||||
<pcpu_id></pcpu_id>
|
||||
</cpu_affinity>
|
||||
<shm_regions desc="List of shared memory regions for inter-VM communication.">
|
||||
<shm_region desc="configure the shm regions for current VM, for example hv:/sharename,2"></shm_region>
|
||||
</shm_regions>
|
||||
<console_vuart desc="A PCI based console vuart which is emulated by device model">Disable</console_vuart>
|
||||
<communication_vuarts desc="List of PCI based communication vuarts which are emulated by device model">
|
||||
<communication_vuart></communication_vuart>
|
||||
</communication_vuarts>
|
||||
<passthrough_devices>
|
||||
<usb_xdci desc="vm usb_xdci device"></usb_xdci>
|
||||
<audio desc="vm audio device">00:1f.3 Audio device: Intel Corporation Device 9dc8 (rev 30)</audio>
|
||||
<audio_codec desc="vm audio codec device"></audio_codec>
|
||||
<ipu desc="vm ipu device"></ipu>
|
||||
<ipu_i2c desc="vm ipu_i2c device"></ipu_i2c>
|
||||
<cse desc="vm cse device"></cse>
|
||||
<wifi desc="vm wifi device"></wifi>
|
||||
<bluetooth desc="vm bluetooth"></bluetooth>
|
||||
<sd_card desc="vm sd card device"></sd_card>
|
||||
<ethernet desc="vm ethernet device"></ethernet>
|
||||
<sata desc="vm sata device"></sata>
|
||||
<nvme desc="vm nvme device"></nvme>
|
||||
</passthrough_devices>
|
||||
|
||||
<virtio_devices>
|
||||
<network desc="virtio network devices setting. Input format: tap_name,[vhost],[mac=XX:XX:XX:XX:XX:XX].">WaaG</network>
|
||||
<input desc="virtio input device"></input>
|
||||
<block desc="virtio block device setting. format: [blk partition:][img path] e.g.: /dev/sda3:./a/b.img">./win10-ltsc.img</block>
|
||||
<console desc="virtio console device,input format: [@]stdio|tty|pty|sock:portname[=portpath][,[@]stdio|tty|pty:portname[=portpath]]"></console>
|
||||
</virtio_devices>
|
||||
</uos>
|
||||
</acrn-config>
|
||||
85
misc/config_tools/data/whl-ipc-i7/industry_launch_2uos.xml
Normal file
85
misc/config_tools/data/whl-ipc-i7/industry_launch_2uos.xml
Normal file
@@ -0,0 +1,85 @@
|
||||
<acrn-config board="whl-ipc-i7" scenario="industry" uos_launcher="2">
|
||||
<uos id="1">
|
||||
<uos_type desc="UOS type">WINDOWS</uos_type>
|
||||
<rtos_type desc="UOS Realtime capability">no</rtos_type>
|
||||
<mem_size desc="UOS memory size in MByte">4096</mem_size>
|
||||
<gvt_args desc="GVT settings. Set it to gvtd for GVTd, otherwise is GVTg arguments. The recommendation arguments for GVTg is 64 448 8. Leave it blank to disable GVT.">gvtd</gvt_args>
|
||||
<vbootloader desc="virtual bootloader method" readonly="true">ovmf</vbootloader>
|
||||
<vuart0 desc="vUART0 which emulated by device model">Enable</vuart0>
|
||||
<poweroff_channel desc="the method of power off uos"></poweroff_channel>
|
||||
<usb_xhci desc="USB xHCI mediator configuration. input format: bus#-port#[:bus#-port#: ...]. e.g.: 1-2:2-4"></usb_xhci>
|
||||
<cpu_affinity desc="List of pCPU that this VM's vCPUs are pinned to.">
|
||||
<pcpu_id></pcpu_id>
|
||||
</cpu_affinity>
|
||||
<shm_regions desc="List of shared memory regions for inter-VM communication.">
|
||||
<shm_region desc="configure the shm regions for current VM, for example hv:/sharename,2"></shm_region>
|
||||
</shm_regions>
|
||||
<console_vuart desc="A PCI based console vuart which is emulated by device model">Disable</console_vuart>
|
||||
<communication_vuarts desc="List of PCI based communication vuarts which are emulated by device model">
|
||||
<communication_vuart></communication_vuart>
|
||||
</communication_vuarts>
|
||||
<passthrough_devices>
|
||||
<usb_xdci desc="vm usb_xdci device"></usb_xdci>
|
||||
<audio desc="vm audio device">00:1f.3 Audio device: Intel Corporation Device 9dc8 (rev 30)</audio>
|
||||
<audio_codec desc="vm audio codec device"></audio_codec>
|
||||
<ipu desc="vm ipu device"></ipu>
|
||||
<ipu_i2c desc="vm ipu_i2c device"></ipu_i2c>
|
||||
<cse desc="vm cse device"></cse>
|
||||
<wifi desc="vm wifi device"></wifi>
|
||||
<bluetooth desc="vm bluetooth"></bluetooth>
|
||||
<sd_card desc="vm sd card device"></sd_card>
|
||||
<ethernet desc="vm ethernet device"></ethernet>
|
||||
<sata desc="vm sata device"></sata>
|
||||
<nvme desc="vm nvme device"></nvme>
|
||||
</passthrough_devices>
|
||||
|
||||
<virtio_devices>
|
||||
<network desc="virtio network devices setting. Input format: tap_name,[vhost],[mac=XX:XX:XX:XX:XX:XX].">WaaG</network>
|
||||
<input desc="virtio input device"></input>
|
||||
<block desc="virtio block device setting. format: [blk partition:][img path] e.g.: /dev/sda3:./a/b.img">./win10-ltsc.img</block>
|
||||
<console desc="virtio console device,input format: [@]stdio|tty|pty|sock:portname[=portpath][,[@]stdio|tty|pty:portname[=portpath]]"></console>
|
||||
</virtio_devices>
|
||||
</uos>
|
||||
|
||||
<uos id="2">
|
||||
<uos_type desc="UOS type">PREEMPT-RT LINUX</uos_type>
|
||||
<rtos_type desc="UOS Realtime capability">Hard RT</rtos_type>
|
||||
<mem_size desc="UOS memory size in MByte">1024</mem_size>
|
||||
<gvt_args configurable="0" desc="GVT settings. Set it to gvtd for GVTd, otherwise is GVTg arguments. The recommendation arguments for GVTg is 64 448 8. Leave it blank to disable GVT."></gvt_args>
|
||||
<vbootloader desc="virtual bootloader method" readonly="true">ovmf</vbootloader>
|
||||
<vuart0 desc="vUART0 which emulated by device model">Disable</vuart0>
|
||||
<poweroff_channel desc="the method of power off uos">vuart1(tty)</poweroff_channel>
|
||||
<usb_xhci desc="USB xHCI mediator configuration. input format: bus#-port#[:bus#-port#: ...]. e.g.: 1-2:2-4"></usb_xhci>
|
||||
<cpu_affinity desc="List of pCPU that this VM's vCPUs are pinned to.">
|
||||
<pcpu_id></pcpu_id>
|
||||
</cpu_affinity>
|
||||
<shm_regions desc="List of shared memory regions for inter-VM communication.">
|
||||
<shm_region desc="configure the shm regions for current VM, for example hv:/sharename,2"></shm_region>
|
||||
</shm_regions>
|
||||
<console_vuart desc="A PCI based console vuart which is emulated by device model">Disable</console_vuart>
|
||||
<communication_vuarts desc="List of PCI based communication vuarts which are emulated by device model">
|
||||
<communication_vuart></communication_vuart>
|
||||
</communication_vuarts>
|
||||
<passthrough_devices>
|
||||
<usb_xdci desc="vm usb_xdci device"></usb_xdci>
|
||||
<audio desc="vm audio device"></audio>
|
||||
<audio_codec desc="vm audio codec device"></audio_codec>
|
||||
<ipu desc="vm ipu device"></ipu>
|
||||
<ipu_i2c desc="vm ipu_i2c device"></ipu_i2c>
|
||||
<cse desc="vm cse device"></cse>
|
||||
<wifi desc="vm wifi device"></wifi>
|
||||
<bluetooth desc="vm bluetooth"></bluetooth>
|
||||
<sd_card desc="vm sd card device"></sd_card>
|
||||
<ethernet desc="vm ethernet device"></ethernet>
|
||||
<sata desc="vm sata device"></sata>
|
||||
<nvme desc="vm nvme device">02:00.0 Non-Volatile memory controller: Silicon Motion, Inc. Device 2263 (rev 03)</nvme>
|
||||
</passthrough_devices>
|
||||
|
||||
<virtio_devices>
|
||||
<network desc="virtio network devices setting. Input format: tap_name,[vhost],[mac=XX:XX:XX:XX:XX:XX]."></network>
|
||||
<input desc="virtio input device"></input>
|
||||
<block desc="virtio block device setting. format: [blk partition:][img path] e.g.: /dev/sda3:./a/b.img"></block>
|
||||
<console desc="virtio console device,input format: [@]stdio|tty|pty|sock:portname[=portpath][,[@]stdio|tty|pty:portname[=portpath]]">@stdio:stdio_port</console>
|
||||
</virtio_devices>
|
||||
</uos>
|
||||
</acrn-config>
|
||||
245
misc/config_tools/data/whl-ipc-i7/industry_launch_6uos.xml
Normal file
245
misc/config_tools/data/whl-ipc-i7/industry_launch_6uos.xml
Normal file
@@ -0,0 +1,245 @@
|
||||
<acrn-config board="whl-ipc-i7" scenario="industry" uos_launcher="6">
|
||||
<uos id="1">
|
||||
<uos_type desc="UOS type">WINDOWS</uos_type>
|
||||
<rtos_type desc="UOS Realtime capability">no</rtos_type>
|
||||
<mem_size desc="UOS memory size in MByte">4096</mem_size>
|
||||
<gvt_args desc="GVT settings. Set it to gvtd for GVTd, otherwise is GVTg arguments. The recommendation arguments for GVTg is 64 448 8. Leave it blank to disable GVT.">gvtd</gvt_args>
|
||||
<vbootloader desc="virtual bootloader method" readonly="true">ovmf</vbootloader>
|
||||
<vuart0 desc="vUART0 which emulated by device model">Enable</vuart0>
|
||||
<poweroff_channel desc="the method of power off uos"></poweroff_channel>
|
||||
<usb_xhci desc="USB xHCI mediator configuration. input format: bus#-port#[:bus#-port#: ...]. e.g.: 1-2:2-4"></usb_xhci>
|
||||
<cpu_affinity desc="List of pCPU that this VM's vCPUs are pinned to.">
|
||||
<pcpu_id></pcpu_id>
|
||||
</cpu_affinity>
|
||||
<shm_regions desc="List of shared memory regions for inter-VM communication.">
|
||||
<shm_region desc="configure the shm regions for current VM, for example hv:/sharename,2"></shm_region>
|
||||
</shm_regions>
|
||||
<console_vuart desc="A PCI based console vuart which is emulated by device model">Disable</console_vuart>
|
||||
<communication_vuarts desc="List of PCI based communication vuarts which are emulated by device model">
|
||||
<communication_vuart></communication_vuart>
|
||||
</communication_vuarts>
|
||||
<passthrough_devices>
|
||||
<usb_xdci desc="vm usb_xdci device"></usb_xdci>
|
||||
<audio desc="vm audio device">00:1f.3 Audio device: Intel Corporation Device 9dc8 (rev 30)</audio>
|
||||
<audio_codec desc="vm audio codec device"></audio_codec>
|
||||
<ipu desc="vm ipu device"></ipu>
|
||||
<ipu_i2c desc="vm ipu_i2c device"></ipu_i2c>
|
||||
<cse desc="vm cse device"></cse>
|
||||
<wifi desc="vm wifi device"></wifi>
|
||||
<bluetooth desc="vm bluetooth"></bluetooth>
|
||||
<sd_card desc="vm sd card device"></sd_card>
|
||||
<ethernet desc="vm ethernet device"></ethernet>
|
||||
<sata desc="vm sata device"></sata>
|
||||
<nvme desc="vm nvme device"></nvme>
|
||||
</passthrough_devices>
|
||||
|
||||
<virtio_devices>
|
||||
<network desc="virtio network devices setting. Input format: tap_name,[vhost],[mac=XX:XX:XX:XX:XX:XX].">WaaG</network>
|
||||
<input desc="virtio input device"></input>
|
||||
<block desc="virtio block device setting. format: [blk partition:][img path] e.g.: /dev/sda3:./a/b.img">./win10-ltsc.img</block>
|
||||
<console desc="virtio console device,input format: [@]stdio|tty|pty|sock:portname[=portpath][,[@]stdio|tty|pty:portname[=portpath]]"></console>
|
||||
</virtio_devices>
|
||||
</uos>
|
||||
|
||||
<uos id="2">
|
||||
<uos_type desc="UOS type">PREEMPT-RT LINUX</uos_type>
|
||||
<rtos_type desc="UOS Realtime capability">Hard RT</rtos_type>
|
||||
<mem_size desc="UOS memory size in MByte">1024</mem_size>
|
||||
<gvt_args configurable="0" desc="GVT settings. Set it to gvtd for GVTd, otherwise is GVTg arguments. The recommendation arguments for GVTg is 64 448 8. Leave it blank to disable GVT."></gvt_args>
|
||||
<vbootloader desc="virtual bootloader method" readonly="true">ovmf</vbootloader>
|
||||
<vuart0 desc="vUART0 which emulated by device model">Disable</vuart0>
|
||||
<poweroff_channel desc="the method of power off uos">vuart1(tty)</poweroff_channel>
|
||||
<usb_xhci desc="USB xHCI mediator configuration. input format: bus#-port#[:bus#-port#: ...]. e.g.: 1-2:2-4"></usb_xhci>
|
||||
<cpu_affinity desc="List of pCPU that this VM's vCPUs are pinned to.">
|
||||
<pcpu_id></pcpu_id>
|
||||
</cpu_affinity>
|
||||
<shm_regions desc="List of shared memory regions for inter-VM communication.">
|
||||
<shm_region desc="configure the shm regions for current VM, for example hv:/sharename,2"></shm_region>
|
||||
</shm_regions>
|
||||
<console_vuart desc="A PCI based console vuart which is emulated by device model">Disable</console_vuart>
|
||||
<communication_vuarts desc="List of PCI based communication vuarts which are emulated by device model">
|
||||
<communication_vuart></communication_vuart>
|
||||
</communication_vuarts>
|
||||
<passthrough_devices>
|
||||
<usb_xdci desc="vm usb_xdci device"></usb_xdci>
|
||||
<audio desc="vm audio device"></audio>
|
||||
<audio_codec desc="vm audio codec device"></audio_codec>
|
||||
<ipu desc="vm ipu device"></ipu>
|
||||
<ipu_i2c desc="vm ipu_i2c device"></ipu_i2c>
|
||||
<cse desc="vm cse device"></cse>
|
||||
<wifi desc="vm wifi device"></wifi>
|
||||
<bluetooth desc="vm bluetooth"></bluetooth>
|
||||
<sd_card desc="vm sd card device"></sd_card>
|
||||
<ethernet desc="vm ethernet device"></ethernet>
|
||||
<sata desc="vm sata device"></sata>
|
||||
<nvme desc="vm nvme device">02:00.0 Non-Volatile memory controller: Silicon Motion, Inc. Device 2263 (rev 03)</nvme>
|
||||
</passthrough_devices>
|
||||
|
||||
<virtio_devices>
|
||||
<network desc="virtio network devices setting. Input format: tap_name,[vhost],[mac=XX:XX:XX:XX:XX:XX]."></network>
|
||||
<input desc="virtio input device"></input>
|
||||
<block desc="virtio block device setting. format: [blk partition:][img path] e.g.: /dev/sda3:./a/b.img"></block>
|
||||
<console desc="virtio console device,input format: [@]stdio|tty|pty|sock:portname[=portpath][,[@]stdio|tty|pty:portname[=portpath]]">@stdio:stdio_port</console>
|
||||
</virtio_devices>
|
||||
</uos>
|
||||
<uos id="3">
|
||||
<uos_type desc="UOS type">YOCTO</uos_type>
|
||||
<rtos_type desc="UOS Realtime capability">no</rtos_type>
|
||||
<mem_size desc="UOS memory size in MByte">512</mem_size>
|
||||
<gvt_args desc="GVT settings. Set it to gvtd for GVTd, otherwise is GVTg arguments. The recommendation arguments for GVTg is 64 448 8. Leave it blank to disable GVT."></gvt_args>
|
||||
<vbootloader desc="virtual bootloader method" readonly="true">ovmf</vbootloader>
|
||||
<vuart0 desc="vUART0 which emulated by device model">Disable</vuart0>
|
||||
<poweroff_channel desc="the method of power off uos" />
|
||||
<usb_xhci desc="USB xHCI mediator configuration. input format: bus#-port#[:bus#-port#: ...]. e.g.: 1-2:2-4" />
|
||||
<cpu_affinity desc="List of pCPU that this VM's vCPUs are pinned to.">
|
||||
<pcpu_id />
|
||||
</cpu_affinity>
|
||||
<shm_regions desc="List of shared memory regions for inter-VM communication.">
|
||||
<shm_region desc="configure the shm regions for current VM, for example hv:/sharename,2"></shm_region>
|
||||
</shm_regions>
|
||||
<console_vuart desc="A PCI based console vuart which is emulated by device model">Disable</console_vuart>
|
||||
<communication_vuarts desc="List of PCI based communication vuarts which are emulated by device model">
|
||||
<communication_vuart></communication_vuart>
|
||||
</communication_vuarts>
|
||||
<passthrough_devices>
|
||||
<usb_xdci desc="vm usb_xdci device" />
|
||||
<audio desc="vm audio device" />
|
||||
<audio_codec desc="vm audio codec device" />
|
||||
<ipu desc="vm ipu device" />
|
||||
<ipu_i2c desc="vm ipu_i2c device" />
|
||||
<cse desc="vm cse device" />
|
||||
<wifi desc="vm wifi device" />
|
||||
<bluetooth desc="vm bluetooth" />
|
||||
<sd_card desc="vm sd card device" />
|
||||
<ethernet desc="vm ethernet device" />
|
||||
<sata desc="vm sata device" />
|
||||
<nvme desc="vm nvme device" />
|
||||
</passthrough_devices>
|
||||
<virtio_devices>
|
||||
<console desc="virtio console device,input format: [@]stdio|tty|pty|sock:portname[=portpath][,[@]stdio|tty|pty:portname[=portpath]]" />
|
||||
<network desc="virtio network devices setting. Input format: tap_name,[vhost],[mac=XX:XX:XX:XX:XX:XX]." />
|
||||
<input desc="virtio input device" />
|
||||
<block desc="virtio block device setting. format: [blk partition:][img path] e.g.: /dev/sda3:./a/b.img" />
|
||||
</virtio_devices>
|
||||
</uos>
|
||||
<uos id="4">
|
||||
<uos_type desc="UOS type">YOCTO</uos_type>
|
||||
<rtos_type desc="UOS Realtime capability">no</rtos_type>
|
||||
<mem_size desc="UOS memory size in MByte">512</mem_size>
|
||||
<gvt_args desc="GVT settings. Set it to gvtd for GVTd, otherwise is GVTg arguments. The recommendation arguments for GVTg is 64 448 8. Leave it blank to disable GVT."></gvt_args>
|
||||
<vbootloader desc="virtual bootloader method" readonly="true">ovmf</vbootloader>
|
||||
<vuart0 desc="vUART0 which emulated by device model">Disable</vuart0>
|
||||
<poweroff_channel desc="the method of power off uos" />
|
||||
<usb_xhci desc="USB xHCI mediator configuration. input format: bus#-port#[:bus#-port#: ...]. e.g.: 1-2:2-4" />
|
||||
<cpu_affinity desc="List of pCPU that this VM's vCPUs are pinned to.">
|
||||
<pcpu_id />
|
||||
</cpu_affinity>
|
||||
<shm_regions desc="List of shared memory regions for inter-VM communication.">
|
||||
<shm_region desc="configure the shm regions for current VM, for example hv:/sharename,2"></shm_region>
|
||||
</shm_regions>
|
||||
<console_vuart desc="A PCI based console vuart which is emulated by device model">Disable</console_vuart>
|
||||
<communication_vuarts desc="List of PCI based communication vuarts which are emulated by device model">
|
||||
<communication_vuart></communication_vuart>
|
||||
</communication_vuarts>
|
||||
<passthrough_devices>
|
||||
<usb_xdci desc="vm usb_xdci device" />
|
||||
<audio desc="vm audio device" />
|
||||
<audio_codec desc="vm audio codec device" />
|
||||
<ipu desc="vm ipu device" />
|
||||
<ipu_i2c desc="vm ipu_i2c device" />
|
||||
<cse desc="vm cse device" />
|
||||
<wifi desc="vm wifi device" />
|
||||
<bluetooth desc="vm bluetooth" />
|
||||
<sd_card desc="vm sd card device" />
|
||||
<ethernet desc="vm ethernet device" />
|
||||
<sata desc="vm sata device" />
|
||||
<nvme desc="vm nvme device" />
|
||||
</passthrough_devices>
|
||||
<virtio_devices>
|
||||
<console desc="virtio console device,input format: [@]stdio|tty|pty|sock:portname[=portpath][,[@]stdio|tty|pty:portname[=portpath]]" />
|
||||
<network desc="virtio network devices setting. Input format: tap_name,[vhost],[mac=XX:XX:XX:XX:XX:XX]." />
|
||||
<input desc="virtio input device" />
|
||||
<block desc="virtio block device setting. format: [blk partition:][img path] e.g.: /dev/sda3:./a/b.img" />
|
||||
</virtio_devices>
|
||||
</uos>
|
||||
<uos id="5">
|
||||
<uos_type desc="UOS type">YOCTO</uos_type>
|
||||
<rtos_type desc="UOS Realtime capability">no</rtos_type>
|
||||
<mem_size desc="UOS memory size in MByte">512</mem_size>
|
||||
<gvt_args desc="GVT settings. Set it to gvtd for GVTd, otherwise is GVTg arguments. The recommendation arguments for GVTg is 64 448 8. Leave it blank to disable GVT."></gvt_args>
|
||||
<vbootloader desc="virtual bootloader method" readonly="true">ovmf</vbootloader>
|
||||
<vuart0 desc="vUART0 which emulated by device model">Disable</vuart0>
|
||||
<poweroff_channel desc="the method of power off uos" />
|
||||
<usb_xhci desc="USB xHCI mediator configuration. input format: bus#-port#[:bus#-port#: ...]. e.g.: 1-2:2-4" />
|
||||
<cpu_affinity desc="List of pCPU that this VM's vCPUs are pinned to.">
|
||||
<pcpu_id />
|
||||
</cpu_affinity>
|
||||
<shm_regions desc="List of shared memory regions for inter-VM communication.">
|
||||
<shm_region desc="configure the shm regions for current VM, for example hv:/sharename,2"></shm_region>
|
||||
</shm_regions>
|
||||
<console_vuart desc="A PCI based console vuart which is emulated by device model">Disable</console_vuart>
|
||||
<communication_vuarts desc="List of PCI based communication vuarts which are emulated by device model">
|
||||
<communication_vuart></communication_vuart>
|
||||
</communication_vuarts>
|
||||
<passthrough_devices>
|
||||
<usb_xdci desc="vm usb_xdci device" />
|
||||
<audio desc="vm audio device" />
|
||||
<audio_codec desc="vm audio codec device" />
|
||||
<ipu desc="vm ipu device" />
|
||||
<ipu_i2c desc="vm ipu_i2c device" />
|
||||
<cse desc="vm cse device" />
|
||||
<wifi desc="vm wifi device" />
|
||||
<bluetooth desc="vm bluetooth" />
|
||||
<sd_card desc="vm sd card device" />
|
||||
<ethernet desc="vm ethernet device" />
|
||||
<sata desc="vm sata device" />
|
||||
<nvme desc="vm nvme device" />
|
||||
</passthrough_devices>
|
||||
<virtio_devices>
|
||||
<console desc="virtio console device,input format: [@]stdio|tty|pty|sock:portname[=portpath][,[@]stdio|tty|pty:portname[=portpath]]" />
|
||||
<network desc="virtio network devices setting. Input format: tap_name,[vhost],[mac=XX:XX:XX:XX:XX:XX]." />
|
||||
<input desc="virtio input device" />
|
||||
<block desc="virtio block device setting. format: [blk partition:][img path] e.g.: /dev/sda3:./a/b.img" />
|
||||
</virtio_devices>
|
||||
</uos>
|
||||
<uos id="6">
|
||||
<uos_type desc="UOS type">YOCTO</uos_type>
|
||||
<rtos_type desc="UOS Realtime capability">no</rtos_type>
|
||||
<mem_size desc="UOS memory size in MByte">512</mem_size>
|
||||
<gvt_args desc="GVT settings. Set it to gvtd for GVTd, otherwise is GVTg arguments. The recommendation arguments for GVTg is 64 448 8. Leave it blank to disable GVT."></gvt_args>
|
||||
<vbootloader desc="virtual bootloader method" readonly="true">ovmf</vbootloader>
|
||||
<vuart0 desc="vUART0 which emulated by device model">Disable</vuart0>
|
||||
<poweroff_channel desc="the method of power off uos" />
|
||||
<usb_xhci desc="USB xHCI mediator configuration. input format: bus#-port#[:bus#-port#: ...]. e.g.: 1-2:2-4" />
|
||||
<cpu_affinity desc="List of pCPU that this VM's vCPUs are pinned to.">
|
||||
<pcpu_id />
|
||||
</cpu_affinity>
|
||||
<shm_regions desc="List of shared memory regions for inter-VM communication.">
|
||||
<shm_region desc="configure the shm regions for current VM, for example hv:/sharename,2"></shm_region>
|
||||
</shm_regions>
|
||||
<console_vuart desc="A PCI based console vuart which is emulated by device model">Disable</console_vuart>
|
||||
<communication_vuarts desc="List of PCI based communication vuarts which are emulated by device model">
|
||||
<communication_vuart></communication_vuart>
|
||||
</communication_vuarts>
|
||||
<passthrough_devices>
|
||||
<usb_xdci desc="vm usb_xdci device" />
|
||||
<audio desc="vm audio device" />
|
||||
<audio_codec desc="vm audio codec device" />
|
||||
<ipu desc="vm ipu device" />
|
||||
<ipu_i2c desc="vm ipu_i2c device" />
|
||||
<cse desc="vm cse device" />
|
||||
<wifi desc="vm wifi device" />
|
||||
<bluetooth desc="vm bluetooth" />
|
||||
<sd_card desc="vm sd card device" />
|
||||
<ethernet desc="vm ethernet device" />
|
||||
<sata desc="vm sata device" />
|
||||
<nvme desc="vm nvme device" />
|
||||
</passthrough_devices>
|
||||
<virtio_devices>
|
||||
<console desc="virtio console device,input format: [@]stdio|tty|pty|sock:portname[=portpath][,[@]stdio|tty|pty:portname[=portpath]]" />
|
||||
<network desc="virtio network devices setting. Input format: tap_name,[vhost],[mac=XX:XX:XX:XX:XX:XX]." />
|
||||
<input desc="virtio input device" />
|
||||
<block desc="virtio block device setting. format: [blk partition:][img path] e.g.: /dev/sda3:./a/b.img" />
|
||||
</virtio_devices>
|
||||
</uos>
|
||||
</acrn-config>
|
||||
182
misc/config_tools/data/whl-ipc-i7/logical_partition.xml
Normal file
182
misc/config_tools/data/whl-ipc-i7/logical_partition.xml
Normal file
@@ -0,0 +1,182 @@
|
||||
<acrn-config board="whl-ipc-i7" scenario="logical_partition">
|
||||
<hv>
|
||||
<DEBUG_OPTIONS desc="Debug options for ACRN hypervisor, only valid on debug version">
|
||||
<RELEASE desc="Release build. 'y' for Release, 'n' for Debug.">n</RELEASE>
|
||||
<SERIAL_CONSOLE configurable="0" desc="The serial device which is used for hypervisor debug, only valid on Debug version.">/dev/ttyS0</SERIAL_CONSOLE>
|
||||
<MEM_LOGLEVEL desc="Default loglevel in memory">5</MEM_LOGLEVEL>
|
||||
<NPK_LOGLEVEL desc="Default loglevel for the hypervisor NPK log">5</NPK_LOGLEVEL>
|
||||
<CONSOLE_LOGLEVEL desc="Default loglevel on the serial console">3</CONSOLE_LOGLEVEL>
|
||||
<LOG_DESTINATION desc="Bitmap of consoles where logs are printed.">7</LOG_DESTINATION>
|
||||
<LOG_BUF_SIZE desc="Capacity of logbuf for each physical cpu.">0x40000</LOG_BUF_SIZE>
|
||||
</DEBUG_OPTIONS>
|
||||
|
||||
<FEATURES>
|
||||
<RELOC desc="Enable hypervisor relocation">y</RELOC>
|
||||
<SCHEDULER desc="The CPU scheduler to be used by the hypervisor.">SCHED_BVT</SCHEDULER>
|
||||
<MULTIBOOT2 desc="Support boot ACRN from multiboot2 protocol.">y</MULTIBOOT2>
|
||||
<RDT desc="Intel RDT (Resource Director Technology).">
|
||||
<RDT_ENABLED desc="Enable RDT">n</RDT_ENABLED>
|
||||
<CDP_ENABLED desc="CDP (Code and Data Prioritization). CDP is an extension of CAT.">n</CDP_ENABLED>
|
||||
</RDT>
|
||||
<HYPERV_ENABLED desc="Enable Hyper-V enlightenment">y</HYPERV_ENABLED>
|
||||
<IOMMU_ENFORCE_SNP desc="IOMMU enforce snoop behavior of DMA operation.">n</IOMMU_ENFORCE_SNP>
|
||||
<ACPI_PARSE_ENABLED desc="Enable ACPI runtime parsing.">y</ACPI_PARSE_ENABLED>
|
||||
<L1D_VMENTRY_ENABLED desc="Enable L1 cache flush before VM entry.">n</L1D_VMENTRY_ENABLED>
|
||||
<MCE_ON_PSC_DISABLED desc="Force to disable software workaround for Machine Check Error on Page Size Change.">n</MCE_ON_PSC_DISABLED>
|
||||
<IVSHMEM desc="IVSHMEM configuration">
|
||||
<IVSHMEM_ENABLED desc="Enable Share Memory between VMs by IVSHMEM.">n</IVSHMEM_ENABLED>
|
||||
<IVSHMEM_REGION desc="the shared memory region name (starting with hv:/, size (in MB), and IDs of all VMs (separated by a colon) sharing this region, for example hv:/sharename,2,0:2"></IVSHMEM_REGION>
|
||||
</IVSHMEM>
|
||||
</FEATURES>
|
||||
|
||||
<MEMORY>
|
||||
<STACK_SIZE desc="Capacity of one stack, in bytes.">0x2000</STACK_SIZE>
|
||||
<HV_RAM_SIZE desc="Size of the RAM region used by the hypervisor"></HV_RAM_SIZE>
|
||||
<HV_RAM_START desc="2M-aligned Start physical address of the RAM region used by the hypervisor."></HV_RAM_START>
|
||||
<LOW_RAM_SIZE desc="Size of the low RAM region">0x00010000</LOW_RAM_SIZE>
|
||||
<UOS_RAM_SIZE desc="Size of the User OS (UOS) RAM.">0x200000000</UOS_RAM_SIZE>
|
||||
<SOS_RAM_SIZE desc="Size of the Service OS (SOS) RAM.">0x400000000</SOS_RAM_SIZE>
|
||||
<PLATFORM_RAM_SIZE desc="Size of the physical platform RAM">0x400000000</PLATFORM_RAM_SIZE>
|
||||
</MEMORY>
|
||||
|
||||
<CAPACITIES desc="Capacity limits for static assigned data struct or maximum supported resouce">
|
||||
<IOMMU_BUS_NUM desc="Highest PCI bus ID used during IOMMU initialization.">0x100</IOMMU_BUS_NUM>
|
||||
<MAX_IR_ENTRIES desc="Maximum number of Interrupt Remapping Entries.">256</MAX_IR_ENTRIES>
|
||||
<MAX_IOAPIC_NUM desc="Maximum number of IO-APICs.">1</MAX_IOAPIC_NUM>
|
||||
<MAX_PCI_DEV_NUM desc="Maximum number of PCI devices.">96</MAX_PCI_DEV_NUM>
|
||||
<MAX_IOAPIC_LINES desc="Maximum number of interrupt lines per IOAPIC.">120</MAX_IOAPIC_LINES>
|
||||
<MAX_PT_IRQ_ENTRIES desc="Maximum number of interrupt source for PT devices.">64</MAX_PT_IRQ_ENTRIES>
|
||||
<MAX_MSIX_TABLE_NUM desc="Maximum number of MSI-X tables per device. Please leave it blank if not sure.">64</MAX_MSIX_TABLE_NUM>
|
||||
<MAX_EMULATED_MMIO desc="Maximum number of emulated MMIO regions.">16</MAX_EMULATED_MMIO>
|
||||
</CAPACITIES>
|
||||
|
||||
<MISC_CFG>
|
||||
<GPU_SBDF desc="Segment, Bus, Device, and function of the GPU.">0x00000010</GPU_SBDF>
|
||||
</MISC_CFG>
|
||||
</hv>
|
||||
|
||||
<vm id="0">
|
||||
<vm_type desc="Specify the VM type" readonly="true">PRE_STD_VM</vm_type>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN PRE-LAUNCHED VM0</name>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag></guest_flag>
|
||||
<guest_flag></guest_flag>
|
||||
</guest_flags>
|
||||
<cpu_affinity desc="List of pCPU that this VM's vCPUs are pinned to.">
|
||||
<pcpu_id>0</pcpu_id>
|
||||
<pcpu_id>2</pcpu_id>
|
||||
</cpu_affinity>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
</clos>
|
||||
<epc_section configurable="0" desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<memory>
|
||||
<start_hpa desc="The start physical address in host for the VM">0x100000000</start_hpa>
|
||||
<size desc="The memory size in Bytes for the VM">0x20000000</size>
|
||||
<start_hpa2 desc="Start of second HPA for non-contiguous allocations in host for the VM">0x0</start_hpa2>
|
||||
<size_hpa2 desc="Memory size of second HPA for non-contiguous allocations in Bytes for the VM">0x0</size_hpa2>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">YOCTO</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<ramdisk_mod desc="The tag for ramdisk image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline."></ramdisk_mod>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait root=/dev/sda3 console=ttyS0 noxsave nohpet no_timer_check ignore_loglevel log_buf_len=16M consoleblank=0 tsc=reliable reboot=acpi
|
||||
</bootargs>
|
||||
</os_config>
|
||||
<legacy_vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</legacy_vuart>
|
||||
<legacy_vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</legacy_vuart>
|
||||
<console_vuart id="0">
|
||||
<base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
</console_vuart>
|
||||
<communication_vuart id="1">
|
||||
<base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
<target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
|
||||
</communication_vuart>
|
||||
<pci_devs desc="pci devices list">
|
||||
<pci_dev desc="pci device">00:17.0 SATA controller: Intel Corporation Device 9dd3 (rev 30)</pci_dev>
|
||||
<pci_dev desc="pci device">03:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)</pci_dev>
|
||||
</pci_devs>
|
||||
<mmio_resources desc="mmio devices list to passthrough">
|
||||
<TPM2 desc="TPM2 device">n</TPM2>
|
||||
</mmio_resources>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<vm_type desc="Specify the VM type" readonly="true">PRE_STD_VM</vm_type>
|
||||
<name desc="vm_name">ACRN PRE-LAUNCHED VM1</name>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag></guest_flag>
|
||||
</guest_flags>
|
||||
<cpu_affinity desc="List of pCPU that this VM's vCPUs are pinned to.">
|
||||
<pcpu_id>1</pcpu_id>
|
||||
<pcpu_id>3</pcpu_id>
|
||||
</cpu_affinity>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
</clos>
|
||||
<epc_section configurable="0" desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<memory>
|
||||
<start_hpa desc="The start physical address in host for the VM">0x120000000</start_hpa>
|
||||
<size desc="The memory size in Bytes for the VM">0x20000000</size>
|
||||
<start_hpa2 desc="Start of second HPA for non-contiguous allocations in host for the VM">0x0</start_hpa2>
|
||||
<size_hpa2 desc="Memory size of second HPA for non-contiguous allocations in Bytes for the VM">0x0</size_hpa2>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">YOCTO</name>
|
||||
<kern_type desc="kernel name">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<ramdisk_mod desc="The tag for ramdisk image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline."></ramdisk_mod>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait root=/dev/sda3 console=ttyS0 noxsave nohpet no_timer_check ignore_loglevel log_buf_len=16M
|
||||
consoleblank=0 tsc=reliable reboot=acpi
|
||||
</bootargs>
|
||||
</os_config>
|
||||
<legacy_vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</legacy_vuart>
|
||||
<legacy_vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</legacy_vuart>
|
||||
<console_vuart id="0">
|
||||
<base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
</console_vuart>
|
||||
<communication_vuart id="1">
|
||||
<base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
<target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
|
||||
</communication_vuart>
|
||||
<pci_devs desc="pci devices list">
|
||||
<pci_dev desc="pci device">00:14.0 USB controller: Intel Corporation Device 9ded (rev 30)</pci_dev>
|
||||
<pci_dev desc="pci device">04:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)</pci_dev>
|
||||
</pci_devs>
|
||||
<mmio_resources desc="mmio devices list to passthrough">
|
||||
<TPM2 desc="TPM2 device">n</TPM2>
|
||||
</mmio_resources>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
184
misc/config_tools/data/whl-ipc-i7/sdc.xml
Normal file
184
misc/config_tools/data/whl-ipc-i7/sdc.xml
Normal file
@@ -0,0 +1,184 @@
|
||||
<acrn-config board="whl-ipc-i7" scenario="sdc">
|
||||
<hv>
|
||||
<DEBUG_OPTIONS desc="Debug options for ACRN hypervisor, only valid on debug version">
|
||||
<RELEASE desc="Release build. 'y' for Release, 'n' for Debug.">n</RELEASE>
|
||||
<SERIAL_CONSOLE desc="The serial device which is used for hypervisor debug, only valid on Debug version.">/dev/ttyS0</SERIAL_CONSOLE>
|
||||
<MEM_LOGLEVEL desc="Default loglevel in memory">5</MEM_LOGLEVEL>
|
||||
<NPK_LOGLEVEL desc="Default loglevel for the hypervisor NPK log">5</NPK_LOGLEVEL>
|
||||
<CONSOLE_LOGLEVEL desc="Default loglevel on the serial console">3</CONSOLE_LOGLEVEL>
|
||||
<LOG_DESTINATION desc="Bitmap of consoles where logs are printed.">7</LOG_DESTINATION>
|
||||
<LOG_BUF_SIZE desc="Capacity of logbuf for each physical cpu.">0x40000</LOG_BUF_SIZE>
|
||||
</DEBUG_OPTIONS>
|
||||
|
||||
<FEATURES>
|
||||
<RELOC desc="Enable hypervisor relocation">y</RELOC>
|
||||
<SCHEDULER desc="The CPU scheduler to be used by the hypervisor.">SCHED_BVT</SCHEDULER>
|
||||
<MULTIBOOT2 desc="Support boot ACRN from multiboot2 protocol.">y</MULTIBOOT2>
|
||||
<RDT desc="Intel RDT (Resource Director Technology).">
|
||||
<RDT_ENABLED desc="Enable RDT">n</RDT_ENABLED>
|
||||
<CDP_ENABLED desc="CDP (Code and Data Prioritization). CDP is an extension of CAT.">n</CDP_ENABLED>
|
||||
<CLOS_MASK desc="Cache Capacity Bitmask">0xff</CLOS_MASK>
|
||||
<CLOS_MASK desc="Cache Capacity Bitmask">0xff</CLOS_MASK>
|
||||
<CLOS_MASK desc="Cache Capacity Bitmask">0xff</CLOS_MASK>
|
||||
<CLOS_MASK desc="Cache Capacity Bitmask">0xff</CLOS_MASK>
|
||||
</RDT>
|
||||
<HYPERV_ENABLED desc="Enable Hyper-V enlightenment">y</HYPERV_ENABLED>
|
||||
<IOMMU_ENFORCE_SNP desc="IOMMU enforce snoop behavior of DMA operation.">n</IOMMU_ENFORCE_SNP>
|
||||
<ACPI_PARSE_ENABLED desc="Enable ACPI runtime parsing.">y</ACPI_PARSE_ENABLED>
|
||||
<L1D_VMENTRY_ENABLED desc="Enable L1 cache flush before VM entry.">n</L1D_VMENTRY_ENABLED>
|
||||
<MCE_ON_PSC_DISABLED desc="Force to disable software workaround for Machine Check Error on Page Size Change.">n</MCE_ON_PSC_DISABLED>
|
||||
<IVSHMEM desc="IVSHMEM configuration">
|
||||
<IVSHMEM_ENABLED desc="Enable Share Memory between VMs by IVSHMEM.">n</IVSHMEM_ENABLED>
|
||||
<IVSHMEM_REGION desc="the shared memory region name (starting with hv:/, size (in MB), and IDs of all VMs (separated by a colon) sharing this region, for example hv:/sharename,2,0:2"></IVSHMEM_REGION>
|
||||
</IVSHMEM>
|
||||
</FEATURES>
|
||||
|
||||
<MEMORY>
|
||||
<STACK_SIZE desc="Capacity of one stack, in bytes.">0x2000</STACK_SIZE>
|
||||
<HV_RAM_SIZE desc="Size of the RAM region used by the hypervisor"></HV_RAM_SIZE>
|
||||
<HV_RAM_START desc="2M-aligned Start physical address of the RAM region used by the hypervisor."></HV_RAM_START>
|
||||
<LOW_RAM_SIZE desc="Size of the low RAM region">0x00010000</LOW_RAM_SIZE>
|
||||
<UOS_RAM_SIZE desc="Size of the User OS (UOS) RAM.">0x200000000</UOS_RAM_SIZE>
|
||||
<SOS_RAM_SIZE desc="Size of the Service OS (SOS) RAM.">0x400000000</SOS_RAM_SIZE>
|
||||
<PLATFORM_RAM_SIZE desc="Size of the physical platform RAM">0x400000000</PLATFORM_RAM_SIZE>
|
||||
</MEMORY>
|
||||
|
||||
<CAPACITIES desc="Capacity limits for static assigned data struct or maximum supported resouce">
|
||||
<IOMMU_BUS_NUM desc="Highest PCI bus ID used during IOMMU initialization.">0x100</IOMMU_BUS_NUM>
|
||||
<MAX_IR_ENTRIES desc="Maximum number of Interrupt Remapping Entries.">256</MAX_IR_ENTRIES>
|
||||
<MAX_IOAPIC_NUM desc="Maximum number of IO-APICs.">1</MAX_IOAPIC_NUM>
|
||||
<MAX_PCI_DEV_NUM desc="Maximum number of PCI devices.">96</MAX_PCI_DEV_NUM>
|
||||
<MAX_IOAPIC_LINES desc="Maximum number of interrupt lines per IOAPIC.">120</MAX_IOAPIC_LINES>
|
||||
<MAX_PT_IRQ_ENTRIES desc="Maximum number of interrupt source for PT devices.">64</MAX_PT_IRQ_ENTRIES>
|
||||
<MAX_MSIX_TABLE_NUM desc="Maximum number of MSI-X tables per device. Please leave it blank if not sure.">64</MAX_MSIX_TABLE_NUM>
|
||||
<MAX_EMULATED_MMIO desc="Maximum number of emulated MMIO regions.">16</MAX_EMULATED_MMIO>
|
||||
</CAPACITIES>
|
||||
|
||||
<MISC_CFG>
|
||||
<GPU_SBDF desc="Segment, Bus, Device, and function of the GPU.">0x00000010</GPU_SBDF>
|
||||
</MISC_CFG>
|
||||
</hv>
|
||||
|
||||
<vm id="0">
|
||||
<vm_type desc="Specify the VM type" readonly="true">SOS_VM</vm_type>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
</clos>
|
||||
<memory>
|
||||
<start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
|
||||
<size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<ramdisk_mod desc="The tag for ramdisk image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline."></ramdisk_mod>
|
||||
<bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
|
||||
</os_config>
|
||||
<legacy_vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">SOS_COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
|
||||
</legacy_vuart>
|
||||
<legacy_vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</legacy_vuart>
|
||||
<console_vuart id="0">
|
||||
<base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
</console_vuart>
|
||||
<communication_vuart id="1">
|
||||
<base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
<target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
|
||||
</communication_vuart>
|
||||
<pci_devs configurable="0" desc="pci devices list">
|
||||
<pci_dev desc="pci device"></pci_dev>
|
||||
</pci_devs>
|
||||
<board_private>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
|
||||
i915.nuclear_pageflip=1 hvlog=2M@0xe00000 memmap=0x200000$0xe00000
|
||||
</bootargs>
|
||||
</board_private>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<cpu_affinity desc="List of pCPU: the guest VM is allowed to create vCPU from all or a subset of this list.">
|
||||
<pcpu_id>1</pcpu_id>
|
||||
<pcpu_id>2</pcpu_id>
|
||||
</cpu_affinity>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
</clos>
|
||||
<epc_section configurable="0" desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<legacy_vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</legacy_vuart>
|
||||
<legacy_vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</legacy_vuart>
|
||||
<console_vuart id="0">
|
||||
<base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
</console_vuart>
|
||||
<communication_vuart id="1">
|
||||
<base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
<target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
|
||||
</communication_vuart>
|
||||
</vm>
|
||||
<vm id="2" configurable="1" desc="specific for Kata">
|
||||
<vm_type readonly="true" desc="Specify the VM type">KATA_VM</vm_type>
|
||||
<cpu_affinity desc="List of pCPU: the guest VM is allowed to create vCPU from all or a subset of this list.">
|
||||
<pcpu_id>3</pcpu_id>
|
||||
</cpu_affinity>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
|
||||
<vcpu_clos>0</vcpu_clos>
|
||||
</clos>
|
||||
<epc_section configurable="0" desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<legacy_vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base configurable="0" desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</legacy_vuart>
|
||||
<legacy_vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base configurable="0" desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
|
||||
</legacy_vuart>
|
||||
<console_vuart id="0">
|
||||
<base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
</console_vuart>
|
||||
<communication_vuart id="1">
|
||||
<base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
|
||||
<target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
|
||||
</communication_vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
44
misc/config_tools/data/whl-ipc-i7/sdc_launch_1uos_laag.xml
Normal file
44
misc/config_tools/data/whl-ipc-i7/sdc_launch_1uos_laag.xml
Normal file
@@ -0,0 +1,44 @@
|
||||
<acrn-config board="whl-ipc-i7" scenario="sdc" uos_launcher="1">
|
||||
<uos id="1">
|
||||
<uos_type desc="UOS type">YOCTO</uos_type>
|
||||
<rtos_type desc="UOS Realtime capability">no</rtos_type>
|
||||
<mem_size desc="UOS memory size in MByte">2048</mem_size>
|
||||
<gvt_args desc="GVT settings. Set it to gvtd for GVTd, otherwise is GVTg arguments. The recommendation arguments for GVTg is 64 448 8. Leave it blank to disable GVT.">gvtd</gvt_args>
|
||||
<vbootloader desc="virtual bootloader method" readonly="true">ovmf</vbootloader>
|
||||
<vuart0 desc="vUART0 which emulated by device model">Disable</vuart0>
|
||||
<poweroff_channel desc="the method of power off uos">vuart1(pty)</poweroff_channel>
|
||||
<usb_xhci desc="USB xHCI mediator configuration. input format: bus#-port#[:bus#-port#: ...]. e.g.: 1-2:2-4"></usb_xhci>
|
||||
<cpu_affinity desc="List of pCPU that this VM's vCPUs are pinned to.">
|
||||
<pcpu_id></pcpu_id>
|
||||
</cpu_affinity>
|
||||
<shm_regions desc="List of shared memory regions for inter-VM communication.">
|
||||
<shm_region desc="configure the shm regions for current VM, for example hv:/sharename,2"></shm_region>
|
||||
</shm_regions>
|
||||
<console_vuart desc="A PCI based console vuart which is emulated by device model">Disable</console_vuart>
|
||||
<communication_vuarts desc="List of PCI based communication vuarts which are emulated by device model">
|
||||
<communication_vuart></communication_vuart>
|
||||
</communication_vuarts>
|
||||
|
||||
<passthrough_devices>
|
||||
<usb_xdci desc="vm usb_xdci device"></usb_xdci>
|
||||
<audio desc="vm audio device"></audio>
|
||||
<audio_codec desc="vm audio codec device"></audio_codec>
|
||||
<ipu desc="vm ipu device"></ipu>
|
||||
<ipu_i2c desc="vm ipu_i2c device"></ipu_i2c>
|
||||
<cse desc="vm cse device"></cse>
|
||||
<wifi desc="vm wifi device"></wifi>
|
||||
<bluetooth desc="vm bluetooth"></bluetooth>
|
||||
<sd_card desc="vm sd card device"></sd_card>
|
||||
<ethernet desc="vm ethernet device"></ethernet>
|
||||
<sata desc="vm sata device"></sata>
|
||||
<nvme desc="vm nvme device"></nvme>
|
||||
</passthrough_devices>
|
||||
|
||||
<virtio_devices>
|
||||
<network desc="virtio network devices setting. Input format: tap_name,[vhost],[mac=XX:XX:XX:XX:XX:XX].">LaaG</network>
|
||||
<input desc="virtio input device"></input>
|
||||
<block desc="virtio block device setting. format: [blk partition:][img path] e.g.: /dev/sda3:./a/b.img">/home/clear/uos/uos.img</block>
|
||||
<console desc="virtio console device,input format: [@]stdio|tty|pty|sock:portname[=portpath][,[@]stdio|tty|pty:portname[=portpath]]">@stdio:stdio_port</console>
|
||||
</virtio_devices>
|
||||
</uos>
|
||||
</acrn-config>
|
||||
44
misc/config_tools/data/whl-ipc-i7/sdc_launch_1uos_zephyr.xml
Normal file
44
misc/config_tools/data/whl-ipc-i7/sdc_launch_1uos_zephyr.xml
Normal file
@@ -0,0 +1,44 @@
|
||||
<acrn-config board="whl-ipc-i7" scenario="sdc" uos_launcher="1">
|
||||
<uos id="1">
|
||||
<uos_type desc="UOS type">ZEPHYR</uos_type>
|
||||
<rtos_type desc="UOS Realtime capability">no</rtos_type>
|
||||
<mem_size desc="UOS memory size in MByte">128</mem_size>
|
||||
<gvt_args desc="GVT settings. Set it to gvtd for GVTd, otherwise is GVTg arguments. The recommendation arguments for GVTg is 64 448 8. Leave it blank to disable GVT."></gvt_args>
|
||||
<vbootloader desc="virtual bootloader method" readonly="true">ovmf</vbootloader>
|
||||
<vuart0 desc="vUART0 which emulated by device model">Enable</vuart0>
|
||||
<poweroff_channel desc="the method of power off uos"></poweroff_channel>
|
||||
<usb_xhci desc="USB xHCI mediator configuration. input format: bus#-port#[:bus#-port#: ...]. e.g.: 1-2:2-4"></usb_xhci>
|
||||
<cpu_affinity desc="List of pCPU that this VM's vCPUs are pinned to.">
|
||||
<pcpu_id></pcpu_id>
|
||||
</cpu_affinity>
|
||||
<shm_regions desc="List of shared memory regions for inter-VM communication.">
|
||||
<shm_region desc="configure the shm regions for current VM, for example hv:/sharename,2"></shm_region>
|
||||
</shm_regions>
|
||||
<console_vuart desc="A PCI based console vuart which is emulated by device model">Disable</console_vuart>
|
||||
<communication_vuarts desc="List of PCI based communication vuarts which are emulated by device model">
|
||||
<communication_vuart></communication_vuart>
|
||||
</communication_vuarts>
|
||||
|
||||
<passthrough_devices>
|
||||
<usb_xdci desc="vm usb_xdci device"></usb_xdci>
|
||||
<audio desc="vm audio device"></audio>
|
||||
<audio_codec desc="vm audio codec device"></audio_codec>
|
||||
<ipu desc="vm ipu device"></ipu>
|
||||
<ipu_i2c desc="vm ipu_i2c device"></ipu_i2c>
|
||||
<cse desc="vm cse device"></cse>
|
||||
<wifi desc="vm wifi device"></wifi>
|
||||
<bluetooth desc="vm bluetooth"></bluetooth>
|
||||
<sd_card desc="vm sd card device"></sd_card>
|
||||
<ethernet desc="vm ethernet device"></ethernet>
|
||||
<sata desc="vm sata device"></sata>
|
||||
<nvme desc="vm nvme device"></nvme>
|
||||
</passthrough_devices>
|
||||
|
||||
<virtio_devices>
|
||||
<network desc="virtio network devices setting. Input format: tap_name,[vhost],[mac=XX:XX:XX:XX:XX:XX]."></network>
|
||||
<input desc="virtio input device"></input>
|
||||
<block desc="virtio block device setting. format: [blk partition:][img path] e.g.: /dev/sda3:./a/b.img">./zephyr.img</block>
|
||||
<console desc="virtio console device,input format: [@]stdio|tty|pty|sock:portname[=portpath][,[@]stdio|tty|pty:portname[=portpath]]">@pty:pty_port</console>
|
||||
</virtio_devices>
|
||||
</uos>
|
||||
</acrn-config>
|
||||
313
misc/config_tools/data/whl-ipc-i7/whl-ipc-i7.xml
Normal file
313
misc/config_tools/data/whl-ipc-i7/whl-ipc-i7.xml
Normal file
@@ -0,0 +1,313 @@
|
||||
<acrn-config board="whl-ipc-i7">
|
||||
<BIOS_INFO>
|
||||
BIOS Information
|
||||
Vendor: American Megatrends Inc.
|
||||
Version: WL10R104
|
||||
Release Date: 09/12/2019
|
||||
BIOS Revision: 5.13
|
||||
</BIOS_INFO>
|
||||
|
||||
<BASE_BOARD_INFO>
|
||||
Base Board Information
|
||||
Manufacturer: Maxtang
|
||||
Product Name: WL10
|
||||
Version: V1.0
|
||||
</BASE_BOARD_INFO>
|
||||
|
||||
<PCI_DEVICE>
|
||||
00:00.0 Host bridge: Intel Corporation Device 3e34 (rev 0b)
|
||||
00:02.0 VGA compatible controller: Intel Corporation Device 3ea0
|
||||
Region 0: Memory at a0000000 (64-bit, non-prefetchable) [size=16M]
|
||||
Region 2: Memory at 90000000 (64-bit, prefetchable) [size=256M]
|
||||
00:12.0 Signal processing controller: Intel Corporation Device 9df9 (rev 30)
|
||||
Region 0: Memory at a141e000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:14.0 USB controller: Intel Corporation Device 9ded (rev 30)
|
||||
Region 0: Memory at a1400000 (64-bit, non-prefetchable) [size=64K]
|
||||
00:14.2 RAM memory: Intel Corporation Device 9def (rev 30)
|
||||
Region 0: Memory at a1416000 (64-bit, non-prefetchable) [disabled] [size=8K]
|
||||
Region 2: Memory at a141d000 (64-bit, non-prefetchable) [disabled] [size=4K]
|
||||
00:16.0 Communication controller: Intel Corporation Device 9de0 (rev 30)
|
||||
Region 0: Memory at a141c000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:17.0 SATA controller: Intel Corporation Device 9dd3 (rev 30)
|
||||
Region 0: Memory at a1414000 (32-bit, non-prefetchable) [size=8K]
|
||||
Region 1: Memory at a141b000 (32-bit, non-prefetchable) [size=256]
|
||||
Region 5: Memory at a141a000 (32-bit, non-prefetchable) [size=2K]
|
||||
00:1a.0 SD Host controller: Intel Corporation Device 9dc4 (rev 30)
|
||||
Region 0: Memory at a1419000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:1c.0 PCI bridge: Intel Corporation Device 9db8 (rev f0)
|
||||
00:1c.4 PCI bridge: Intel Corporation Device 9dbc (rev f0)
|
||||
00:1d.0 PCI bridge: Intel Corporation Device 9db0 (rev f0)
|
||||
00:1d.1 PCI bridge: Intel Corporation Device 9db1 (rev f0)
|
||||
00:1f.0 ISA bridge: Intel Corporation Device 9d84 (rev 30)
|
||||
00:1f.3 Audio device: Intel Corporation Device 9dc8 (rev 30)
|
||||
Region 0: Memory at a1410000 (64-bit, non-prefetchable) [size=16K]
|
||||
Region 4: Memory at a1000000 (64-bit, non-prefetchable) [size=1M]
|
||||
00:1f.4 SMBus: Intel Corporation Device 9da3 (rev 30)
|
||||
Region 0: Memory at a1418000 (64-bit, non-prefetchable) [size=256]
|
||||
00:1f.5 Serial bus controller [0c80]: Intel Corporation Device 9da4 (rev 30)
|
||||
Region 0: Memory at fe010000 (32-bit, non-prefetchable) [size=4K]
|
||||
02:00.0 Non-Volatile memory controller: Silicon Motion, Inc. Device 2263 (rev 03)
|
||||
Region 0: Memory at a1300000 (64-bit, non-prefetchable) [size=16K]
|
||||
03:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)
|
||||
Region 0: Memory at a1200000 (32-bit, non-prefetchable) [size=128K]
|
||||
Region 3: Memory at a1220000 (32-bit, non-prefetchable) [size=16K]
|
||||
04:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)
|
||||
Region 0: Memory at a1100000 (32-bit, non-prefetchable) [size=128K]
|
||||
Region 3: Memory at a1120000 (32-bit, non-prefetchable) [size=16K]
|
||||
</PCI_DEVICE>
|
||||
|
||||
<PCI_VID_PID>
|
||||
00:00.0 0600: 8086:3e34 (rev 0b)
|
||||
00:02.0 0300: 8086:3ea0
|
||||
00:12.0 1180: 8086:9df9 (rev 30)
|
||||
00:14.0 0c03: 8086:9ded (rev 30)
|
||||
00:14.2 0500: 8086:9def (rev 30)
|
||||
00:16.0 0780: 8086:9de0 (rev 30)
|
||||
00:17.0 0106: 8086:9dd3 (rev 30)
|
||||
00:1a.0 0805: 8086:9dc4 (rev 30)
|
||||
00:1c.0 0604: 8086:9db8 (rev f0)
|
||||
00:1c.4 0604: 8086:9dbc (rev f0)
|
||||
00:1d.0 0604: 8086:9db0 (rev f0)
|
||||
00:1d.1 0604: 8086:9db1 (rev f0)
|
||||
00:1f.0 0601: 8086:9d84 (rev 30)
|
||||
00:1f.3 0403: 8086:9dc8 (rev 30)
|
||||
00:1f.4 0c05: 8086:9da3 (rev 30)
|
||||
00:1f.5 0c80: 8086:9da4 (rev 30)
|
||||
02:00.0 0108: 126f:2263 (rev 03)
|
||||
03:00.0 0200: 8086:157b (rev 03)
|
||||
04:00.0 0200: 8086:157b (rev 03)
|
||||
</PCI_VID_PID>
|
||||
|
||||
<WAKE_VECTOR_INFO>
|
||||
#define WAKE_VECTOR_32 0x8C8AA08CUL
|
||||
#define WAKE_VECTOR_64 0x8C8AA098UL
|
||||
</WAKE_VECTOR_INFO>
|
||||
|
||||
<RESET_REGISTER_INFO>
|
||||
#define RESET_REGISTER_ADDRESS 0xCF9UL
|
||||
#define RESET_REGISTER_SPACE_ID SPACE_SYSTEM_IO
|
||||
#define RESET_REGISTER_VALUE 0x6U
|
||||
</RESET_REGISTER_INFO>
|
||||
|
||||
<PM_INFO>
|
||||
#define PM1A_EVT_SPACE_ID SPACE_SYSTEM_IO
|
||||
#define PM1A_EVT_BIT_WIDTH 0x20U
|
||||
#define PM1A_EVT_BIT_OFFSET 0x0U
|
||||
#define PM1A_EVT_ADDRESS 0x1800UL
|
||||
#define PM1A_EVT_ACCESS_SIZE 0x2U
|
||||
#define PM1B_EVT_SPACE_ID SPACE_SYSTEM_IO
|
||||
#define PM1B_EVT_BIT_WIDTH 0x0U
|
||||
#define PM1B_EVT_BIT_OFFSET 0x0U
|
||||
#define PM1B_EVT_ADDRESS 0x0UL
|
||||
#define PM1B_EVT_ACCESS_SIZE 0x2U
|
||||
#define PM1A_CNT_SPACE_ID SPACE_SYSTEM_IO
|
||||
#define PM1A_CNT_BIT_WIDTH 0x10U
|
||||
#define PM1A_CNT_BIT_OFFSET 0x0U
|
||||
#define PM1A_CNT_ADDRESS 0x1804UL
|
||||
#define PM1A_CNT_ACCESS_SIZE 0x2U
|
||||
#define PM1B_CNT_SPACE_ID SPACE_SYSTEM_IO
|
||||
#define PM1B_CNT_BIT_WIDTH 0x0U
|
||||
#define PM1B_CNT_BIT_OFFSET 0x0U
|
||||
#define PM1B_CNT_ADDRESS 0x0UL
|
||||
#define PM1B_CNT_ACCESS_SIZE 0x2U
|
||||
</PM_INFO>
|
||||
|
||||
<S3_INFO>
|
||||
/* S3 is not supported by BIOS */
|
||||
#define S3_PKG_VAL_PM1A 0x0U
|
||||
#define S3_PKG_VAL_PM1B 0x0U
|
||||
#define S3_PKG_RESERVED 0x0U
|
||||
</S3_INFO>
|
||||
|
||||
<S5_INFO>
|
||||
#define S5_PKG_VAL_PM1A 0x7U
|
||||
#define S5_PKG_VAL_PM1B 0U
|
||||
#define S5_PKG_RESERVED 0x0U
|
||||
</S5_INFO>
|
||||
|
||||
<DRHD_INFO>
|
||||
#define DRHD_COUNT 2U
|
||||
|
||||
#define DRHD0_DEV_CNT 0x1U
|
||||
#define DRHD0_SEGMENT 0x0U
|
||||
#define DRHD0_FLAGS 0x0U
|
||||
#define DRHD0_REG_BASE 0xFED90000UL
|
||||
#define DRHD0_IGNORE true
|
||||
#define DRHD0_DEVSCOPE0_TYPE 0x1U
|
||||
#define DRHD0_DEVSCOPE0_ID 0x0U
|
||||
#define DRHD0_DEVSCOPE0_BUS 0x0U
|
||||
#define DRHD0_DEVSCOPE0_PATH 0x10U
|
||||
|
||||
#define DRHD1_DEV_CNT 0x2U
|
||||
#define DRHD1_SEGMENT 0x0U
|
||||
#define DRHD1_FLAGS 0x1U
|
||||
#define DRHD1_REG_BASE 0xFED91000UL
|
||||
#define DRHD1_IGNORE false
|
||||
#define DRHD1_DEVSCOPE0_TYPE 0x3U
|
||||
#define DRHD1_DEVSCOPE0_ID 0x2U
|
||||
#define DRHD1_DEVSCOPE0_BUS 0x0U
|
||||
#define DRHD1_DEVSCOPE0_PATH 0xf7U
|
||||
#define DRHD1_DEVSCOPE1_TYPE 0x4U
|
||||
#define DRHD1_DEVSCOPE1_ID 0x0U
|
||||
#define DRHD1_DEVSCOPE1_BUS 0x0U
|
||||
#define DRHD1_DEVSCOPE1_PATH 0xf6U
|
||||
|
||||
</DRHD_INFO>
|
||||
|
||||
<CPU_BRAND>
|
||||
"Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz"
|
||||
</CPU_BRAND>
|
||||
|
||||
<CX_INFO>
|
||||
{{SPACE_FFixedHW, 0x01U, 0x02U, 0x01U, 0x00UL}, 0x01U, 0x01U, 0x00U}, /* C1 */
|
||||
{{SPACE_FFixedHW, 0x01U, 0x02U, 0x01U, 0x33UL}, 0x02U, 0x97U, 0x00U}, /* C2 */
|
||||
{{SPACE_FFixedHW, 0x01U, 0x02U, 0x01U, 0x60UL}, 0x03U, 0x40AU, 0x00U}, /* C3 */
|
||||
</CX_INFO>
|
||||
|
||||
<PX_INFO>
|
||||
{0x835UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002E00UL, 0x002E00UL}, /* P0 */
|
||||
{0x834UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001500UL, 0x001500UL}, /* P1 */
|
||||
{0x7D0UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001400UL, 0x001400UL}, /* P2 */
|
||||
{0x76CUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001300UL, 0x001300UL}, /* P3 */
|
||||
{0x708UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001200UL, 0x001200UL}, /* P4 */
|
||||
{0x6A4UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001100UL, 0x001100UL}, /* P5 */
|
||||
{0x640UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001000UL, 0x001000UL}, /* P6 */
|
||||
{0x5DCUL, 0x00UL, 0x0AUL, 0x0AUL, 0x000F00UL, 0x000F00UL}, /* P7 */
|
||||
{0x578UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000E00UL, 0x000E00UL}, /* P8 */
|
||||
{0x514UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000D00UL, 0x000D00UL}, /* P9 */
|
||||
</PX_INFO>
|
||||
|
||||
<MMCFG_BASE_INFO>
|
||||
/* PCI mmcfg base of MCFG */
|
||||
#define DEFAULT_PCI_MMCFG_BASE 0xe0000000UL
|
||||
</MMCFG_BASE_INFO>
|
||||
|
||||
<CLOS_INFO>
|
||||
</CLOS_INFO>
|
||||
|
||||
<IOMEM_INFO>
|
||||
00000000-00000fff : Reserved
|
||||
00001000-0005efff : System RAM
|
||||
0005f000-0005ffff : Reserved
|
||||
00060000-0009ffff : System RAM
|
||||
000a0000-000fffff : Reserved
|
||||
000a0000-000bffff : PCI Bus 0000:00
|
||||
000c0000-000cffff : Video ROM
|
||||
000f0000-000fffff : System ROM
|
||||
00100000-3fffffff : System RAM
|
||||
40000000-403fffff : Reserved
|
||||
40000000-403fffff : pnp 00:00
|
||||
40400000-80916017 : System RAM
|
||||
78000000-79202390 : Kernel code
|
||||
79400000-799f9fff : Kernel rodata
|
||||
79a00000-79bed63f : Kernel data
|
||||
79dd6000-7a9fffff : Kernel bss
|
||||
80916018-80926657 : System RAM
|
||||
80926658-80927017 : System RAM
|
||||
80927018-80937057 : System RAM
|
||||
80937058-84dcefff : System RAM
|
||||
84dcf000-84dcffff : ACPI Non-volatile Storage
|
||||
84dd0000-84dd0fff : Reserved
|
||||
84dd1000-8bfbefff : System RAM
|
||||
8bfbf000-8c420fff : Reserved
|
||||
8c421000-8c49dfff : ACPI Tables
|
||||
8c49e000-8c8aafff : ACPI Non-volatile Storage
|
||||
8c8ab000-8cefefff : Reserved
|
||||
8ceff000-8cefffff : System RAM
|
||||
8cf00000-8fffffff : Reserved
|
||||
8e000000-8fffffff : Graphics Stolen Memory
|
||||
90000000-dfffffff : PCI Bus 0000:00
|
||||
90000000-9fffffff : 0000:00:02.0
|
||||
a0000000-a0ffffff : 0000:00:02.0
|
||||
a1000000-a10fffff : 0000:00:1f.3
|
||||
a1000000-a10fffff : ICH HD audio
|
||||
a1100000-a11fffff : PCI Bus 0000:02
|
||||
a1100000-a111ffff : 0000:02:00.0
|
||||
a1100000-a111ffff : igb
|
||||
a1120000-a1123fff : 0000:02:00.0
|
||||
a1120000-a1123fff : igb
|
||||
a1200000-a12fffff : PCI Bus 0000:01
|
||||
a1200000-a121ffff : 0000:01:00.0
|
||||
a1200000-a121ffff : igb
|
||||
a1220000-a1223fff : 0000:01:00.0
|
||||
a1220000-a1223fff : igb
|
||||
a1300000-a130ffff : 0000:00:14.0
|
||||
a1300000-a130ffff : xhci-hcd
|
||||
a1310000-a1313fff : 0000:00:1f.3
|
||||
a1310000-a1313fff : ICH HD audio
|
||||
a1314000-a1315fff : 0000:00:17.0
|
||||
a1314000-a1315fff : ahci
|
||||
a1316000-a1317fff : 0000:00:14.2
|
||||
a1318000-a13180ff : 0000:00:1f.4
|
||||
a1319000-a1319fff : 0000:00:1a.0
|
||||
a1319000-a1319fff : mmc0
|
||||
a131a000-a131a7ff : 0000:00:17.0
|
||||
a131a000-a131a7ff : ahci
|
||||
a131b000-a131b0ff : 0000:00:17.0
|
||||
a131b000-a131b0ff : ahci
|
||||
a131c000-a131cfff : 0000:00:16.0
|
||||
a131c000-a131cfff : mei_me
|
||||
a131d000-a131dfff : 0000:00:14.2
|
||||
a131e000-a131efff : 0000:00:12.0
|
||||
a131e000-a131efff : Intel PCH thermal driver
|
||||
e0000000-efffffff : PCI MMCONFIG 0000 [bus 00-ff]
|
||||
e0000000-efffffff : Reserved
|
||||
e0000000-efffffff : pnp 00:0d
|
||||
fc800000-fe7fffff : PCI Bus 0000:00
|
||||
fd000000-fd69ffff : pnp 00:0e
|
||||
fd6a0000-fd6affff : pnp 00:10
|
||||
fd6b0000-fd6cffff : pnp 00:0e
|
||||
fd6d0000-fd6dffff : pnp 00:10
|
||||
fd6e0000-fd6effff : pnp 00:10
|
||||
fd6f0000-fdffffff : pnp 00:0e
|
||||
fe000000-fe010fff : Reserved
|
||||
fe010000-fe010fff : 0000:00:1f.5
|
||||
fe200000-fe7fffff : pnp 00:0e
|
||||
fec00000-fec00fff : Reserved
|
||||
fec00000-fec003ff : IOAPIC 0
|
||||
fed00000-fed003ff : HPET 0
|
||||
fed00000-fed003ff : PNP0103:00
|
||||
fed10000-fed17fff : pnp 00:0d
|
||||
fed18000-fed18fff : pnp 00:0d
|
||||
fed19000-fed19fff : pnp 00:0d
|
||||
fed20000-fed3ffff : pnp 00:0d
|
||||
fed45000-fed8ffff : pnp 00:0d
|
||||
fed90000-fed90fff : dmar0
|
||||
fed91000-fed91fff : dmar1
|
||||
fee00000-fee00fff : Local APIC
|
||||
fee00000-fee00fff : Reserved
|
||||
ff000000-ffffffff : Reserved
|
||||
ff000000-ffffffff : pnp 00:0e
|
||||
100000000-26dffffff : System RAM
|
||||
26e000000-26fffffff : RAM buffer
|
||||
</IOMEM_INFO>
|
||||
|
||||
<BLOCK_DEVICE_INFO>
|
||||
/dev/nvme0n1p3: TYPE="ext4"
|
||||
/dev/sda3: TYPE="ext4"
|
||||
</BLOCK_DEVICE_INFO>
|
||||
|
||||
<TTYS_INFO>
|
||||
seri:/dev/ttyS0 type:portio base:0x3F8 irq:4
|
||||
seri:/dev/ttyS1 type:portio base:0x2F8 irq:3
|
||||
seri:/dev/ttyS2 type:portio base:0x3E8 irq:7
|
||||
seri:/dev/ttyS3 type:portio base:0x2E8 irq:7
|
||||
</TTYS_INFO>
|
||||
|
||||
<AVAILABLE_IRQ_INFO>
|
||||
6, 10, 11, 13, 14, 15
|
||||
</AVAILABLE_IRQ_INFO>
|
||||
|
||||
<TOTAL_MEM_INFO>
|
||||
8105908 kB
|
||||
</TOTAL_MEM_INFO>
|
||||
|
||||
<CPU_PROCESSOR_INFO>
|
||||
0, 1, 2, 3
|
||||
</CPU_PROCESSOR_INFO>
|
||||
|
||||
<MAX_MSIX_TABLE_NUM>
|
||||
16
|
||||
</MAX_MSIX_TABLE_NUM>
|
||||
|
||||
</acrn-config>
|
||||
Reference in New Issue
Block a user