- Move the variable local_time from main.c to rtc.c
- Change vrtc_init to return int instead of pointer to vrtc. We do
track vrtc in struct vmctx.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- Add "DBG" or "REL" to indicate the DBG build or REL build explicityly;
- Change the build time format to "%F %T".
Example:
HV version 0.1-rc4-2018-04-28 14:20:32-b2d7282-dirty DBG build by like
Change-Id: Ib410064b0a6603e3c90f30dffa722237c07fc069
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Print an error message and exit rather than using assert, so it is
more obvious what the problem is and no core files are produced.
Fixes#61
Signed-off-by: Icarus Sparry <icarus.w.sparry@intel.com>
Make assert on max px cnt of boot cpu data, since it shouldn't happen if
px data is properly initialized in boot process.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The initial of iobitmap pointer should be moved out of loop since address
is sequentially incremented.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
with this patch guest could access idle io port and enter idle normally.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The patch add function in vhm hypercall to retrieve physical cx data
to VHM/DM.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Each VM would have its own Cx data, for now we copy it from boot_cpu_info.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The cx data is hardcoded within HV, load it to boot_cpu_data when HV boot.
The patch provide a3960 soc cx data for example.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Following functions have never been used anywhere.
Let's remove them.
fbsdrun_muxed()
fbsdrun_vmexit_on_hlt()
fbsdrun_vmexit_on_pause()
fbsdrun_disable_x2apic()
Remove weird prefix "fbsdrun" from following functions' name.
fbsdrun_virtio_msix() --> virtio_uses_msix()
fbsdrun_start_thread() --> start_thread()
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove weird prefix "fbsdrun" from the function name.
Since "fbsdrun_addcpu" has never been called by external
functions, Let's remove its declaration from "dm.h" and
make it as a static function to keep consistency with
"fbsdrun_deletecpu".
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
currently, pass-thru devices are managed by per-vm's remapping entries
which is virtual based:
- MSI entry is identified by virt_bdf+msix_index
- INTx entry is identified by virt_pin+vpin_src
it works but it's not a good design for physical resource management, for
example a physical IOAPIC pin could belong to different vm's INTx entries,
the Device Model then must make sure there is no resource conflict from
application's level.
This patch change the design from virtual to physical based:
- MSI entry is identified by phys_bdf+msix_index
- INTx entry is identified by phys_pin
The physical resource is directly managed in hypervisor, a miss adding
entry will be found by hypervisor and return error message with failure.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Tech note articles about technology and process tips now have a place in
the ACRN documentaion.
Move the doc process documention into this new area, and add a
placeholder for tech tips for now.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Some assumptioins about the doc build process were removed to make it
easier for contributors to build local version of the docs. Assumption
now is that acrn-hypervisor and acrn-devicemodel content is up to date
rather than pulling from upstream on every build.
make pullsource will do an upstream pull manually
make html generates local docs
Also fixed broken link in the README.md file (moved the tech doc root)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The launch script can output log messages, that should be text.
But it is not always true. E.g. "launch_UOS.sh -U 2" echo message
contain '\0', The 'grep' command will show "Binary file (xxxxxx)
matches", thus acrnctl can't get the vmname. We can use 'grep -a'
instead.
Acked-by: Xu Anthony <anthony.xu@intel.com>
Reviewed-by: Yan Like <like.yan@intel.com>
Reported-by: Chen ChengX <chengx.chen@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
add initialize_timer to initialize or reset a timer;
add_timer add timer to corresponding physical cpu timer list.
del_timer delete timer from corresponding physical cpu timer list.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Get tsc hz by cpuid 0x15 if we supported, otherwise
calibrate tsc by pit timer.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If guest reboot is issued before trusty init hypercall is issued,
we shouldn't destroy ept fo trusty memory because the ept is not
created yet.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
If guest doesn't initialize the net device, the tx thread will
block at the first tx_cond wait. When virtio_net_tx_stop is
invoked, the tx_thread will block on second tx_cond then.
Check whether we should exit tx_thread after first tx_cond
waiting
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Due to redundant waking up APs When rebooting UOS, the crash occurs
and fail to reboot UOS.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Using eax will truncate the high 32bit part of 64bit virtual address.
And the type of sync is unsigned long, so using rbx instead of ebx.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
This is to do the clean-up of IOAPIC mmio-access. Use the same API to
access the IOAPIC register. At the same time it also helps to avoid the
optimization in direct access mode.(The volatile is already added in
mmio_read_long/mmio_write_long)
V1->V2: Follow Fengwei's suggestion to use the mmio_read/write_long
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
The input operand for inline assembly is passed from the caller. And they
are not the immediate type. Instead the register should be used.
This also helps to reduce the compile error if the optimizatin is enabled.
Signed-off-by: Zhao Yakui<yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add AmbientTemperature signal into the whitelist,
instead of TemperatureSensorEnvironment signal.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now just add some basic feature/capability detect (not all). Vapic
didn't add here for if we must support vapic then the code which
for vapic not supported must remove, like mmio apic r/w.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove some useless signals from the whitelist and add new three signals into
the whitelist based on requirement.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Split pm.c from cpu_state_tbl.c to put guest power management related
functions, keep cpu_state_tbl.c to store host cpu state table and
related functions.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
for timer list is operated by per-cpu; and no interrupt
service operates it too. So it's unnecessary for spinlock.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
adding "hugepagesz=1G" and "hugepages=X" into SOS cmdline, for X, current
strategy is making it equal
e820_mem.total_mem_size -CONFIG_REMAIN_1G_PAGES
if CONFIG_REMAIN_1G_PAGES is not set, it will use 3 by default.
CONFIG_CMA is added to indicate using cma cmdline option for SOS kernel,
by default system will use hugetlb cmdline option if no CONFIG_CMA defined.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
change its input from map_params to page_table_type, and make it as a
public API.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
adding API vm_map_memseg_vma() which using ioctl IC_SET_MEMSEG call
into VHM for futher mem(ept) mapping, based on user vma information.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Type '-T' in DM cmdline to enable hugetlb memory allocation.
It enabled 2 level of huge page:
Level 1: size 2M, path: /run/hugepage/acrn/huge_lv1/guid
Level 2: size 1G, path: /run/hugepage/acrn/huge_lv2/guid
NOTE:
before running, please make sure system already have enough hugepages
reserved under:
/sys/kernel/mm/hugepages/hugepages-xxxxkB/nr_hugepages
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
before just AP can run "rdtscp" intruction, if run it on BSP,
it will cause "illegal instruction"; now align BSP & AP.
also remove duplicated code.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. exception vector and other information
can be extracted from 'VM-Exit Interrupt-Information'
field of VMCS only if bit31 (Valid) is set.
-Intel SDM 24.9.2, Vol3
2. Rename 'exit-interrupt_info' to 'idt_vectoring_info'
in 'struct vcpu_arch', which is consistent with
SDM 24.9.3, Vol3
3. 'IDT-vectoring information' in VMCS is 32bit
-Intel SDM 24.9.3, Vol3
Update the type of 'idt_vectoring_info' in
'struct vcpu_arch'from 'uint32_t' to 'uint64_t'.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
to avoid system resource/memory leaked when guest os reboot.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
