Now we split passthrough PCI device from DM to HV, we could remove all the passthrough
PCI device unused code.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In this case, we could handle all the passthrough PCI devices in ACRN hypervisor.
But we still need DM to initialize BAR resources and Intx for passthrough PCI
device for post-launched VM since these informations should been filled into
ACPI tables. So
1. we add a HC vm_assign_pcidev to pass the extra informations to replace the old
vm_assign_ptdev.
2. we saso remove HC vm_set_ptdev_msix_info since it could been setted by the post-launched
VM now same as SOS.
3. remove vm_map_ptdev_mmio call for PTDev in DM since ACRN hypervisor will handle these
BAR access.
4. the most important thing is to trap PCI configure space access for PTDev in HV for
post-launched VM and bypass the virtual PCI device configure space access to DM.
This patch doesn't do the clean work. Will do it in the next patch.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Add assign/deassign PCI device ioctl APIs assign a PCI device from SOS to
post-launched VM or deassign a PCI device from post-launched VM to SOS. This patch
is prepared for spliting passthrough PCI device from DM to HV.
The old assign/deassign ptdev APIs will be discarded.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Intel Graphics Device(IGD) passthrough on Windows guest
has the restriction that it need a lpc bridge device
located in 00:1f.0 PCI slot.
This patch add a 'gpu' option for 'passthrou' type device,
which will create the dedicated "igd-lpc" for IGD passthrough.
Tracked-On: #4405
v2 -> v3:
* refine the commit message and comments.
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Wu Binbin <binbin.wu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Intel Graphics Device(IGD) passthrough on Windows guest
has the restriction that it need a lpc bridge device
located in 00:1f.0 PCI slot.
This patch add an extra lpc class for this restriction,
the lpc class will be used to create a dummy lpc bridge.
To enable gvt-d GOP driver work,
the VID, DID, REVID, SUBVID, SUBDID of igd-lpc
need aligned with physical one.
Tracked-On: #4405
v2 -> v3:
* refine the comment message and comments.
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Wu Binbin <binbin.wu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
For "Split Device Model", pass-through PCI will be implemented in HV,
"reset" param is added into DM cmdline to ensure PCI device's status before launching VM.
WaaG will fail to boot if adding pass-through audio in default,
because current audio card's reset function isn't supported on WHL platform.
Tracked-On: #4397
Signed-off-by: fangfang.shen <fangfang.shen@intel.com>
uos IGD driver need opregion when enable GVT-d.
This patch pass-thru opregion to uos gpu.
Here is the steps:
(1) set opregion gpa(guest physical addrress) 0xDFFFD000;
(2) get opregion hpa(host physical addrress);
(3) build EPT mapping for opregion.
v1 -> v2:
* initialize the EPT mapping for passthrough GPU opregion region
in passthru_init instead of reading the ASLS config space
v2 -> v3:
* add EPT unmap when deinit
* change some micro name
Tracked-On: #4360
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Liu XinYun <xinyun.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Wu Binbin <binbin.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
gop driver and uos IGD driver will use
graphics stolen memory(gsm) when enable GVT-d.
This patch pass-thru gsm to uos gpu.
After set physical GPU gsm size 64MB in host BIOS:
Here is the steps:
(1) set gsm gpa(guest physical addrress) 0xDB000000;
(2) get gsm hpa(host physical addrress);
(3) build EPT mapping for gsm.
v1 -> v2:
* initialize the EPT mapping for passthrough GPU gsm region
in passthru_init instead of reading the BDSM config space
v2 -> v3:
* add EPT unmap when deinit
* change some micro name
Tracked-On: #4360
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Liu XinYun <xinyun.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Wu Binbin <binbin.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Now the PCI bar uses the hardcoded prefetch property
for the pass-through device.
This doesn't work when trying to load windows GPU driver
for the pass-through GPU device.
For pass-through devices,
set the bar prefetchable property the same as physical bar.
Tracked-On: #4282
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When update pci bar addr,
DM may change the bar property by func pci_cfgrw.
PCI spec chapter 'Base Addresses' shows
bits 0~3 are readonly of memeory space BAR,
so this change won't happen.
This patch ensures pci bar property unchanged
when update pci bar addr.
Tracked-On: #4282
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
use acrn-dm logger function instread of perror,
this helps the stability testing log capture.
Tracked-On: #4098
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Do reset for passthrough PCI device by default when assigning it to post-launched
VM:
1. modify opt "reset" to "no_reset" -- could enable no_reset for debug only
2. remove "ptdev_no_reset" opt. It could be replaced by setting "no_reset" for
each passthrough device.
Tracked-On: #3465
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch refactors the CMD_OPT_LAPIC_PT case branch
to explicity add the dependency of option RTVM at the
same branch, it is decoupled from the next case branch
to comply with strict code standard and improve the
code readability.
Tracked-On: #4283
Signed-off-by: Gary <gordon.king@intel.com>
Now the GVT already tries to reserve the region.
the problem is that the region should be
reflected in PCI BUS0 memlimit32 and updated to DSDT table.
As the GVT PCI bar0/2 is in reserved region
and not updated to memlimit32 in DSDT table,
the problem is triggered.
Tracked-On: projectacrn#4227
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Add the below flags, they are needed in -O2:
-fno-delete-null-pointer-checks:
* tells the compiler NOT to assume that null pointer deference does
not exist.
* Without this flag, below case cannot be detected:
a pointer might point to nullsometime during run-time and if there
is no validation for that pointer, it will cause the program to crash.
Since we don’t receive an error message saying that a pointer is
pointing to null, we will have a hard time trying to find the problem.
-fwrapv:
* tells the compiler that signed overflow always wraps.
* Without this flag, x + 10 > x will always be true for signed x.
With the flag, x + 10 > x is not always be true, as the overflow is
defined for x, and it could wrap.
Tracked-On: #4194
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Need to enable gvt bar registration, so remove the previous workaround patch.
Tracked-On: projectacrn#4005
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Liu XinYun <xinyun.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The current design has the following problem:
uos kernel may update gvt bars' regions,
but ACRN-DM doesn't know this update.
ACRN-DM only know out-of-date gvt bar regions,
For simplicity, mark these bar regions as OOD bar regions.
uos kernel may allocate OOD bar regions for
other pci devices, which will result in ACRN-DM
bar regions inconsistency with uos kernel.
The new design is the following:
When other pci device update bar regions
(1) ACRN-DM updates gvt bars' regions
provided by a system file.
(2) ACRN-DM updates this pci device bar regions
v5 -> v6:
* add more comments
v4 -> v5:
* remove & for callback func assignment
v3 -> v4:
* compare gpu bar address to avoid unnecessary
* unregistered/registered operation
v2 -> v3:
* call unregister_bar and register_bar when update gvt bars
* update gvt reserved regions when update gvt bars
Tracked-On: projectacrn#4005
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Liu XinYun <xinyun.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
ACRN-DM has reserved gvt bar regions.
This patch ensures other pci devices' bar regions
won't overlap with reserved bar regions.
v6 -> v7:
* rename some struct and func
v5 -> v6:
* remove outdated comment
* add comments for code reading
* code cleaning about gvt bar0 and bar2 size
v4 -> v5:
* rename adjust_bar_region and adjust_bar_region_by_gvt_bars
* change adjust_bar_region_by_gvt_bars interface for code cleaning
v3 -> v4:
* add static struct gvt_region instead of definition or pointer array.
v2 -> v3:
* repalce pci_emul_alloc_bar with gvt_reserve_resource when allocate gvt bars
* use register_bar to detect if gvt bars confilts with pci devices
v1 -> v2:
* don't limit the gvt bar type is MEM32 when deal with pci bar
* add is_two_region_overlap func to detect if two regions overlap
* add region array to store gvt bar0 and bar2 regions
Tracked-On: projectacrn#4005
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Liu XinYun <xinyun.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The current design has the following problem:
gvt uses some pci bar regions,
but ACRN-DM isn't aware of these regions.
So ACRN-DM may allocate these regions for other pci devices,
which will result in other pci devices bar regions
overlap with gvt bar regions.
The new design is the following:
(1) ACRN-DM reads gvt bar regions
which are provided by physical gpu;
(2) ACRN-DM reserves gvt bar regions
v6 -> v7:
* use array to store reserved bar regions
* rename some struct and func
v5 -> v6:
* rename enable_gvt to gvt_enabled
* add a interface to reserve bar regions
* reserve gvt bar regions
Tracked-On: projectacrn#4005
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Liu XinYun <xinyun.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
use acrn-dm logger function instread of fprintf,
this helps the stability testing log capture.
Tracked-On: #4098
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Cao Minggui <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Use acrn-dm logger function instread of printf,
this helps the stability testing log capture.
Tracked-On: #4098
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Cao Minggui <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
The parameter of intel_pstate should be 'disable' instead of 'disabled'.
This patch fixes it.
Tracked-On: #4094
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
The acrn vhm driver will convert all PCI configure space access to
PCI_CFG type, so the pci_emul_cfgaddr and pci_emul_cfgdata will nerver
be invoked. Remove these useless functions.
Tracked-On: #3999
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Lock should be held till all the mmap operations are done. This is to
avoid the mmap failure when multiple guests are created concurrently.
For example consider the following case in which vm1 and vm2 are
created by acrnd concurrently:
- vm1 is created with 4G+2M memory.
- 4G+2M memory is reserved in hugetlb now and vm1 continues to
allocate memory for the lowmem without lock held.
- 2G memory is allocated by vm1 for its lowmem, and 2G+2M memory
is available in hugetlb.
- At this time vm2 is created with 1G+2M memory. It finds that enough
memory is reserved (2G+2M), so it does not try to reserve more
memory.
- vm2 allocates some memory for its lowmem/highmem/ovmf.
- vm1 tries to allocate memory for its highmem/ovmf, the allocation
will fail. vm1 creation failed in this case.
Tracked-On: #3947
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The device model generating ACPI table use the old ASL
standard(version:20190816), then the iasl in clearlinux(version:31360)
is 20191018, it can't disassemble the ACPI table compiled by old
standard.
Tracked-On: #3933
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In function crb_reg_write() in tpm_rbc.c
'tpm_vdev->request_mutex' will potentially kept
in locked state after crb_reg_write() returns.
Tracked-On: #3825
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Yadong Qi <yadong.qi@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Wrong NVMe bdf info of KBLNUC7i7DNH is modified by mistake; so change it back.
Tracked-On: #3827
Reviewed-by: binbin.wu@intel.com
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
In acrn_load_elf(), file pointer 'fp' is kept in
open state before exiting if 'load_elf32()' is executed,
this patch is to fix this bug.
Tracked-On: #3817
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
slot value should be checked in range before used to access
bi->slotinfo[].
Tracked-On: #3822
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
DIR handler is referenced after release, need to be adjusted before
released.
Tracked-On: #3821
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When removing node in list, list_foreach_safe will be safer than
LIST_FOREACH.
Tracked-On: #3778
Signed-off-by: Junhao Gao <junhao.gao@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
int snprintf(char *str, size_t size, const char *format, ...)
The functions snprintf() write at most size bytes (including the
terminating null byte('\0')) to str.
only when returned value of snprintf is non-negative and less than size,
the string has been completely written.
Tracked-On: #3789
Signed-off-by: Junhao Gao <junhao.gao@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The default script is for nvme passthrough to RT_LaaG; you can change it
to sata or using virtio_blk
Tracked-On: #3575
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
Reviewed-by: binbin.wu@intel.com; kaige.fu@intel.com
After Windows 10, version 1607, the cross-signed drivers are forbiden
to load when secure boot is enabled.
Details please refer to
https://docs.microsoft.com/en-us/windows-hardware/drivers/install/kernel-mode-code-signing-policy--windows-vista-and-later-
That means the kvm-guest-drivers-windows can't work when secure boot enabled.
So we found another windows virtio FE drivers from Oracle to resolve this issue
but have to change another subsystem vendor ID for the virtio BE services.
This patch introduces a new DM CMD line "--windows" to launch WaaG with Oracle virtio devices including
virtio-blk, virtio-net, virtio-input instead Redhat. It can make virtio-blk, virtio-net and virtio-input
devices work when WaaG enabling secure boot.
Tracked-On: #3583
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Currently, DM only access /sys/kernel/mm/hugepages/hugepages-2048kB/
entries according to its own huge page requirement. So it could have
following race issue:
DM1 DM2
read nr pages
read nr pages
write DM2 nr pages
write DM1 nr pages
Suppose we should write DM1 + DM2 nr page to kernel sysfs interface
to reserve enough huge page (DM1 + DM2). But actually only reserve
huge page requested by DM1. Which could trigger one VM can't boot.
We can easily hit this issue if we enable multiple UOS auto boot
because more than one VM are started at almost same time.
We add file lock to make sure huge page reserving in DM atomic.
Tracked-On: #3729
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
- GvtGopDxe: Fix crash if failed to get a valid mode
- GvtGopDxe: Enable GOP with parameters from vgt interface
- OvmfPkg/GvtGopDxe: Add GvtGopDxe skeleton driver
- Add back NVME support
- Update Readme.md
Tracked-On: #3700
Signed-off-by: Peter Fang <peter.fang@intel.com>
This patch is used to support multiple Event Ring Segment Table (ERST).
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch only changes some names of varaibles about Event Ring Segement
Table (ERST), and doesn't modify any code logic.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The Windows 10 feeds back quicker than Linux OS when error occured
due to device disconnecting, it will quickly reset the xHCI controller
before the DM starts to emulate disconnect event and it may cause some
unexpected errors such as crash.
This patch will do one more check when error happens, if the error
is induced by device disconnecting, the DM will not report error and
just wait until the disconnect event is reported to the guest. This
change could produce the correct hehavior as we expected.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The block count of the struct usb_xfer is hard coded by the macro
USB_MAX_XFER_BLOCKS (1024), it wastes memory if 1024 blocks are
allocated for low speed transfer such as control transfer or interrupt
transfer. This patch introduces a new method to allocate different
number of blocks according to different endpoint type.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The overrun and underrun event are used in the timing control machanism,
this patch is used to implement this feature.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The Block Event Interrupt (BEI) bit in the TRB descriptor could
delay the triggering of interrupt. For most OSes, the native
driver for xHCI will use this bit to optimize the IO performence,
due to reduction of number of interrupts.
But in Linux, the native xHCI driver for Intel brand controller
doesn't use this bit. It is fine for the native scenario due to
most work is completed by hardware. But in virtualization scenario,
it is almost impossible to support heavy data IO such as high
resolution video recording (ISOC transfer).
Hence, this issue is solved by a 'quirk' when the intel hardware is
emulated (when vendor id is set as 0x8086). For other cases, a
virtal hardware called 'ACRN xHCI' is emulated, and both Linux and
Windows will use BEI bit by default.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The old logic to emulate MFINDEX register is not right, this patch
is used to fix it.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Just changed the name of the variable and didn't change any emulation
code logic.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In the struct usb_block, there are some fields such as 'ccs',
'streamid', which should not be seen in the USB layer. This
patch intruduces new struct xhci_block to include the variables
for xHCI emulation.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When control transfer is detected and an unnecessary reset of
struct usb_xfer is conducted. This behavior is not necessary
and this patch is used to remove it.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Introduce helper functions to make code shorter and cleaner.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In Windows OS, there are many non-data blocks (EVENT DATA) during the USB
data transfer process, which is very different from the Linux conterpart.
To support both OS, the data processing logic is changed with the help of
newly introduced enum usb_block_type.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In the process of USB data transfer, there three kinds of data blocks:
a. Non data block, which contains some control information;
b. Partial data block, which contains part of a large data chunk;
c. Full data block, which contains a complete data chunk.
In previous implementation, the differences mentioned above are described
by the usb_block::chained. But the 'chained' is concept in the xHCI area
and should not appear in the USB layer. This patch introduces enum type
usb_block_type to replace the 'chained' field in struct usb_block.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Some names of functions and variables are long and not exact, this
patch is used to change them, no logic code are affected. The
changing included:
usb_data_xfer -> usb_xfer
usb_data_xfer_block -> usb_block
usb_xfer_blk_stat -> usb_block_stat
usb_data_xfer_append -> usb_block_append
USB_XFER_BLK_* -> USB_BLOCK_*
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Remove the '-c' option from all scripts as it has been removed from
dm code.
Tracked-On: #3663
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Remove the guest cpu number option '-c', as the guest cpu number is
defined in hypervisor vm configuration file, and the number can be
return by vm_create().
Tracked-On: #3663
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, we pre-define VM configuration statically in HV. So HV can create
vcpus instead of DM when VM create.
This patch get the created vcpu_num from HV. vm_create_vcpu can be
removed later if kernel can get vcpu_num correctly without
IC_CREATE_VCPU ioctl.
v4: Keep vm_create_vcpu in DM for compatbility. We might remove it when
kernel is ready.
Tracked-On: #3663
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
* Update the launch scripts provided as examples on how to launch a Zephyr,
VxWorks or Windows User VM to directly use the 'OVMF.fd' bios file installed
by default in '/usr/share/acrn/bios/'
* Remove the OVMF.fd that was kept under 'doc/tutorials' (no longer needed)
* Adapt the tutorials to reflect this change
Tracked-On: #3673
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Adjust the 'launch_uos.sh' script used to start a LaaG User VM to user the
OVMF.fd bios file installed under /usr/share/acrn/bios. It currently points
at a file in the local folder but neither our instructions nor our installation
script file puts it in this location. That results in an error when you try
to launch it.
Tracked-On: #3673
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
if RTVM, now we assume it can't be shutdown forcely by SOS, so
add check condition to avoid that.
Tracked-On: #3564
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
1. for post-launch general VM, like LaaG, the vUART is emulated in DM,
so the power off control channel is:
acrn-dm:pty[master <-> salve] <--> acrn-dm:vUART <--> UOS:vUART
2. for RTVM, like RT-Linux, the vUART is emulated in hypervisor layer,
so the control channel is:
acrn-dm <--> SOS:/dev/ttyS1 <--> Hypervisor <--> UOS:vUART.
So the settings in launch script are different.
Tracked-On: #3564
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
vuart can be used as communication channel between VMs;
here vuart used to control vm's power off flow; control command
is from SOS to UOS
Tracked-On: #3564
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
for pty vuart operation will be commonly used by other module,
like pm-vuart: control UOS power off through vuart.
Tracked-On: #3564
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
We seperate the guest power event notify channel out. And now
it's required to give the guest power event notify channel
explicitly. Update the sample launch script to have correct
parameters.
Tracked-On: #3564
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Now, we have two ways to notify guest about power managment
event:
- ioc on MRB platforms
- ACPI power button on other platforms
And we hardcode which one is used now.
In coming change, we will add UART based guest notify method.
We add dm command option to select which method will be used
when launch UOS.
Tracked-On: #3564
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
For the code which forwards the native power button event to
guest, they are not related with guest pm related operation
emulation. Move this part of code out of pm.c. And will make
the power button as one possible method to notify guest about
the shutdown operation.
Tracked-On: #3564
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
Remove the '-p' ("pincpu" option) from the help displayed when calling 'acrn-dm
-h'.
Tracked-On: #3600
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The patch fixes enumeration related issues introduced by commit 'fc3d19'.
Tracked-On: #3612
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Change hardcode of vcpu number to the real value when process VM's IO
request in DM, so we can handle all requests from different vcpus.
Tracked-On: #3425
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add subclass for virtio-console pci device. Without the subclass, the
device may be probed by 8250_pci serial driver, and lead to segment
fault in acrn-dm. This issue appears when running debian as Guest OS.
But there is a potential issue, if a new serial driver, which use class
and subclass same as virtio-console, the problem may still trigger. Need
to fix it case by case.
Tracked-On: #3615
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
According to $(LINUX_SRC)/Documentation/x86/boot.txt, the header
of bzimage has setup sector number in offset 0x1f1. We don't
need to scan the SETUP_SIG and detect the setup sector number
actually which is not documented in x86 boot protocol.
Tracked-On: #3619
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Fix potential risk to crash due to null pointer.
Tracked-On: #3612
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
ACRN-DM does not support "pincpu" option to pin 'vcpu' to 'hostcpu', ACRN support vcpu to pcpu static mapping
via vm_config.
This commit removes the "pincpu" option.
Tracked-On: #3600
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
ACPI supports two ways for power button device, one of them is control
method, and its _HID object is PNP0C0C.
If power button mediator doesn't scan power button from LNXPWRBN node
try to scan PNP0C0C node instead.
v2): Move the functions of openning fixed/control method power button to open_native_power_button
Tracked-On: #3594
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
OVMF will open source for V1.2, so enable launch LaaG with OVMF.
Tracked-On: #3506
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
fix violations touched below:
1.Cast operation on a constant value
2.signed/unsigned implicity conversion
3.return value unused.
V1->V2:
1.bitmap api will return boolean type, not need to check "!= 0", deleted.
2.The behaves ~(uint32_t)X and (uint32_t)~X are not defined in ACRN hypervisor Coding Guidelines,
removed the change of it.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
This patch is used to expand WaaG memory from 2G to 4G in launch script.
Tracked-On: #3576
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Keep LaaG aperture size consistent with the host bios setting,
if we statically set LaaG aperture 256MB,
it may not have memory space for LaaG aperture.
We get host aperture size from cfg port 0x62.
Tracked-On: #3537
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Xinyun Liu <xinyun.liu@intel.com>
If failed to create native_adapter, free allocated native_adapter memory before return.
Tracked-On: #3543
Signed-off-by: Yifan Luo <luoyifan@cmss.chinamobile.com>
When DM receives the Disable Slot command, according to xHCI spec,
the PP bit in PORTSC register should not be cleared.
Tracked-On: #3486
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The USB mediator doesn't support USB Attached SCSI (UAS) protocol
due to no proper implementation for USB Stream. This patch will
use USB Bulk transfer to workaround until formal implentation for
UAS is ready.
Tracked-On: #3486
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add native bus and port information in the control transfer logging code.
Tracked-On: #3486
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
- Add support for VRING_USED_F_NO_NOTIFY in virtio devices
- Revert "Initialize EmuVariable NV storage memory with varstore from
ROM"
- Add AcrnEmuVariableFvbRuntimeDxe to support NV storage
- Enable ahci driver.
Secure boot is supported from this release onwards.
Tracked-On: #3506
Signed-off-by: Peter Fang <peter.fang@intel.com>
The array index of "epid" may be out of bounds if
"epid >= XHCI_MAX_ENDPOINTS", so bound check is
necessary before it is used.
Tracked-On: #3434
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
When someone send DM message DM_STOP, with a non-zero data.acrnd_stop.force
value, DM set suspend mode to VM_SUSPEND_POWEROFF directly, that will
cause DM quit main loop. That can force stop VM
Tracked-On: #3484
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
when stdio is set as a virtio-console, guest run in backend, the open
file descriptor is not referring to a terminal.
Tracked-On: #3473
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Jian Jun Chen <jian.jun.chen@intel.com>
Remove the possible NULL pointer access code for virtio-console.c
Add '\0' to end of native_patch[], to avoid the potential issue when
using %s to print the array for virtio-i2c.c
Tracked-On: #3467
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yonghua Huang <Yonghua.huang@intel.com>
Add feature that client uos can still connect to server uos after
rebooting.
Tracked-On: #3459
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
To support modification of OVMF NV storage, add an option "w" for
--ovmf to write the changed OVMF NV data section back to the OVMF image
from guest memory before deinit operations. This will enable persistent
EFI variables. Only option "w" is supported, dm will exit if passing
invalid option. It expects OVMF NV storage writeback with option "w"
when power off or reboot the UOS, poweroff, cold and warm reboot in EFI
shell and when dm recieves SIGINT and SIGHUP.
Tracked-On: #3413
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Reviewed-by：Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
In order to support OVMF NV storage writeback, the High BIOS region in
the guest will behave as RAM and can be modified by OVMF itself. Give
the guest write permission to this page.
Tracked-On: #3413
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
In release environment, binary files must be stripped in
order to remove debugging code sections and symbol information
that aid attackers in the process of disassembly and reverse
engineering.
Use '-s' linking option to remove symbol table and relocation
information from release binaries.
Tracked-On: #3427
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
The old logic identify the short packet complete status (CS) by
comparing the transfered bytes (TB) and the expected transfered
bytes (ETB), it is right only when no error happend. If error
appears, the TB may be less than the ETB, but DM should report
error CS instead of short packet CS.
Tracked-On: #3401
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add resume state for the Port Link Status (PLS) bits.
Tracked-On: #3401
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When the Stop Endpoint command is trapped, should not clear all
the data structure. Instead, only reset the ring buffer.
The reason is the xHCI may continue queue TRB without doing whole
initializing process again.
Tracked-On: #3401
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Not change code logic, just modify some logging code.
Tracked-On: #3401
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
sprintf/vsnprintf are not safe, so use snprintf
instead of sprintf, use vasprintf instead of vsnprintf.
Tracked-On: #3394
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Minggui Cao <minggui.cao@intel.com>
va_end() was not getting called under certain condition
after the va_start() function call taking the va_list.
Tracked-On: #3396
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Set virtio-console BE to stdio for LaaG. Remove 'com1' but still keep
'console=ttyS0' in Laag kernel cmdline.
'console=ttyS0' means LaaG will use ttyS0 (0x3F8) as a console port, and
during bringup, it will access port ttyS0. When the same port is added
to hypervisor configuration file as a console port, the output will be
captured by hypervisor console, and can switch by "vm_console <vm_id>".
Tracked-On: #3370
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Current hugetlbfs code has a limitation on file path length.
The path string comprises of mount path + vm name.
Something like /run/hugepage/acrn/huge_lv1/vm1.
To this UUID (32 bytes) is added and the total path length
should be less than 128.
This works fine but in cases where the VM name is large as
in case kata, this check fails. Kata passes a sandbox-id
as VM name and so path + 32 for UUID easily exceed 128 bytes.
“/run/hugepage/acrn/huge_lv1/
sandbox-6d455fa48788eae82dee42410fc3d38849c2a5196f930b3d6944805aed8d24c7"
To address this, increase the size of MAX_PATH_LEN from
128 to 256 bytes.
Tracked-On: #3379
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Add dsdt information for i2c adapter and i2c slave devices. Currently,
only support 'cam1', 'cam2' and 'hdac' for MRB board. To add other
specific i2c device, please extend acpi_node_table[].
Usage:
virtio-i2c,<bus>[:<slave_addr>[@<node>]][:<slave_addr>[@<node>]]
[,<bus>[:<slave_addr>[@<node>]][:<slave_addr>][@<node>]]
e.g.
virtio-i2c,0:70@cam1:2F
This will add slave devices 0x70, 0x74 to virtio i2c adapter.
And for 0x70, it has '@cam1', so, will also add acpi info for
it. For 0x74, it has no '@<node>', will not add any acpi info
for it.
Note, there is slave address in acpi node info, please use '@<node>'
according to real hardware.
Tracked-On: #3357
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
Create a new thread for virtio-i2c to process i2c msg from FE. After
receive the msg, BE will dispatch it to corresponding native adapter,
after the process done, it will kick the FE.
Tracked-On: #3357
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
Add backend interface for virtio-i2c, it will parse the parameters,
maintain the info for native i2c device, remap the slave address and
dispatch the requirement from FE. When there is only one native adapter,
will not remap the slave address.
Usage for virtio-i2c:
virtio-i2c,<bus>[:<slave_addr>][:<slave_addr>]
[,<bus>[:<slave_addr>][:<slave_addr>]]
e.g.
1. virtio-i2c,4:1C
SOS:
mount /dev/i2c-4, slave addr is 0x1C.
Guest OS:
/dev/i2c-x
|- 0x1C
2. virtio-i2c,4:1C:2F,6:70
SOS:
/dev/i2c-4, slave addr 0x1C and 0x2F
/dev/i2c-6, slave addr 0x70
Guest OS:
/dev/i2c-x
|- 0x1C
|- 0x2F
|- 0x70
Tracked-On: #3357
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
Add virtio i2c adapter BE driver.
Tracked-On: #3357
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
- check input by condition check, instead of assert.
- remove redundant header file including for some files.
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
errx() does not require an additional exit().
Tracked-On: #3252
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: <yonghua.huang@intel.com>
Acked-by: Yin, Fengwei <fengwei.yin@intel.com>
Remove the use of assert() in vHPET.
Tracked-On: #3252
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: <yonghua.huang@intel.com>
Acked-by: Yin, Fengwei <fengwei.yin@intel.com>
Remove the use of assert() in vPIT.
Tracked-On: #3252
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: <yonghua.huang@intel.com>
Acked-by: Yin, Fengwei <fengwei.yin@intel.com>
This reverts commit c42b41fe2b.
Kernel will stay in xapic mode with this boot arg, lapic won't be passthru, so revert.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
handle the error if failed to create GVT device.
- remove assert
- clean up the allocated resource
V2: refine code and clean up the allocated resource
Tracked-On: #3349
Signed-off-by: Liu Xinyun <xinyun.liu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
This commit adds "noapic" boot option to rt-linux, to skip IOAPIC probe.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Bug fix for parsing options, as the vritio-console support multiple
virtio serial ports, and the parameters is split by ',':
virtio-console,[@]stdio|tty|pty|file:portname[=portpath]\
[,[@]stdio|tty|pty|file:portname[=portpath]]
But the previous patch "refine console options parse code" not
cover this case, can only parse one port config. Fix it in this patch.
Tracked-On: #3337
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
SOS bootargs is specified in vm_configurations.h in different scenarios.
The files in devicemodel/samples/<board>/sos_bootargs_*.txt are not used anymore.
Remove these deprecated files to avoid confusion.
Tracked-On: #3214
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Remove assert in USB mediator code.
Tracked-On: #3252
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
The path modify the configuration for the runC container. There have
three changes for the configuration.
1、args [ "sh" ]: this is an example parameter and when the VM is started,
the parameter will be replaced by the launch_UOS script.
2、The linux capabilities will guarantee the Acrn-dm have enough capabilities
to run in container. For more infomation about the capalility you can refer
http://man7.org/linux/man-pages/man7/capabilities.7.htm
3、Move the rootfs to the parent directory, so all the container can share
the same rootfs.
Tracked-On: projectacrn#2020
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Remove unnecessary assert and add error handling when required.
Tracked-On: #3252
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Current launch script leaves stdio to OVMF console and, vxworks console to pty, so users
need to use additional tool like minicom to connect to pty device to use vxWorks.
To be more convinient, this commit changes the vxWorks to use the stdio by default, and OVMF
is not availabe by default.
Tracked-On: #3069
Signed-off-by: Yan, Like <like.yan@intel.com>
This patch is to clean up assert from virtio-gpio
Tracked-On: #3252
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
This patch is to clean up assert from ioc
Tracked-On: #3252
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
This patch is to clean up assert from virtio-block
Tracked-On: #3252
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
This patch is to clean up assert from achi.
Tracked-On: #3252
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
This patch is to clean up assert for block interface.
'magic' is removed from block structure, as the user should make sure
the block device is created and not closed when access to it.
Tracked-On: #3252
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
cleanup 'assert' usage to avoid possible software vulnerabilities
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
'assert' usage cleanup to avoid possible software vulnerabilities
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
cleanup 'assert' usage to avoid possible software vulnerabilities.
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
cleanup 'assert' to avoid possible software vulnerabilities
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
- 'assert' cleanup to avoid possible software vulnerabilities.
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
cleanup 'assert' to avoid possible vulnerabilities.
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
This patch is to clean up assert from virtio-net.
Tracked-On: #3252
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
This patch is to fix some potential memory leak issues
1, free mrp if the mmio_rb_lookup() function return 0;
2, free memory allocated by strdup in some error case handling.
Tracked-On: #3277
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
