Remove pre-launched VM console setting in scenario xml and leave it
configured in bootargs directly.
Tracked-On: #4808
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The bootarg of rootfs for pre-launched VM is for Linux only and it
should not limited to physical block device which is selectable from
native rootfs list, it might be a USB or RAM device that "X" is variable
in root=/dev/sdX or /dev/ramX. So remove the rootfs setting in XML and
leave it configured in kernel bootargs directly.
Given the SOS must be Linux and its rootfs must be a physical block
device, rootfs item tag is still reserved in xml for SOS VM section.
Tracked-On: #4808
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
remove configurable="0" for hybrid scenario pci_devs of Pre Launched VM.
Tracked-On: #4808
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
With current acrn-config code, there would be no pci_dev.c generated
if no PCI devices were selected. This would cause a bug for logical_partition
scenario because of an old pci_dev.c is already in the folder and involved
for compiling. The configure tool should override the pci_dev.c, in this case,
to avoid building error.
Tracked-On: #4813
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
As VUART is not supported PCI VUART, use native PCI ttySn's IRQ for
VUART1 would cause communication failed, allocate a free IRQ for it.
Tracked-On: #4798
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Use post_vm_id$(relative id) to identify each post-launched VM to
make sure simultaneous launching successfully.
Tracked-On: #4797
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
add board xml and default scenario config xmls and launch config
xmls for ElkhartLake boards.
Tracked-On: #4798
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Assign the right acrn-dm arguments for "Soft RT/Hard RT" VMs by
'uos_type' in webUI item tag.
Tracked-On: #4799
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Remove "idle=halt" from SOS boot args since the param could be handled
automatically by acrn-config according to CPU scheduler setting.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Tools: cleanup acrn_mngr pause/continue message
The 'pause/continue' acrnctl cmd is never used and their action are not
defined for ACRN VMs. Remove them from README.
Tracked-On: #4790
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
The 'pause/continue' acrnctl cmd is never used and their action are not
defined for ACRN VMs. should be removed. Remove them from acrn_mngr.
Tracked-On: #4790
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
The 'pause/continue' acrnctl cmd is never used and their action are not
defined for ACRN VMs. should be removed.
Tracked-On: #4790
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
If HV relocation is enabled, either ACRN efi-stub or GRUB relocates
hypervisor image above HPA 256MB, thus we put hvlog and ramoops buffer
under 256MB to avoid conflict with hypervisor owned address.
This patch hardcodes these addresses:
0xa00000 - 0xdfffff: 4MiB for ramoops buffer
0xe00000 - 0xffffff: 2MiB for hvlog buffer
However, user can customize them to other addresses as long as it's under
256MB, available in host e820, and SOS bootarg "nokaslr" is not specified.
If HV relocation is disabled, need to make sure that these buffer
addresses are not between HV_RAM_START and HV_RAM_START + HV_RAM_SIZE.
Tracked-On: #4760
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
With this patch, we relocate hypervisor image to HPA 256MB and above,
thus the hardcoded hvlog and ramoops buffer for SOS can safely reside at
addresses under HPA 256MB, given that 1:1 mapping between SOS GPA and HPA.
Tracked-On: #4760
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
enable gvtd for waag of nuc7/nuc6 board by default.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
For nuc7/nuc6/whl-ipci5/whl-ipc-i7 board, add 4 POST_STD_VM and 1
KATA_VM in their industry config xmls, and assign PCPU0-1 to these
PRE_LAUNCHED_VM.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Parse KATA VM count number from scenario config with vm_type 'KATA_VM'
and Remove MAX_KATA_VM_NUM from scenario config xmls.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
When passthrough device for VM, if there is no fun0 of the slot was passed
in, PCI expansion card can not respond as a device, it must implement at
least function number 0.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Refine CPU affinity sanity check for both scenario and launch config
xmls.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Refinement for VM type sanity check relays on VM UUID number.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
remove configurable="0" for pci_devs of pre-launched VM so that the
passthru devices could be configurable on webUI.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Parse cpu_affinity from launch config xmls and generate '--cpu_affinity' as
acrn-dm args.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
1.Remove cpu_sharing item from launch config xml.
2.Add cpu_affinity for launch config xmls to configurable POST VM cpu
affinity from webUI.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Change the tag name from "vcpu_affinity" to 'cpu_affinity" in all the per
board scenario xml files, and change the descritpions.
Tracked-On: #4641
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
hypervisor is replacing vm_configs[].vcpu_affinity[] array with
cpu_affinity_bitmap, the meaning of which has some changes as well.
This patch changes the names in generated vm_configuration.c:
-.vcpu_affinity = VMx_CONFIG_VCPU_AFFINITY,
+.cpu_affinity_bitmap = VMx_CONFIG_CPU_AFFINITY,
Changes in vm_configuration.h:
-#define VMx_CONFIG_VCPU_AFFINITY {AFFINITY_CPU(xU), AFFINITY_CPU(xU)}
+#define VMx_CONFIG_CPU_AFFINITY (AFFINITY_CPU(xU) | AFFINITY_CPU(xU))
Also don't generate default assignment of vcpu_num in vm_configuration.c,
because now hypervisor can easily calculate it from cpu_affinity_bitmap.
Accordingly, in the scenario xml files, tag "vcpu_affinity" is changed
to "cpu_affinity".
Tracked-On: #4641
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
When dynamically creating or adding or deleting VMs, acrn config app
will assign VM IDs for the VMs with the orders of prelaunched VMs and SOS
VM and postlaunched VMs to be consistent with the VM order of vm_configs
in vm configuration. When dynamically creating launch scripts, acrn
config app will let users to specify the VM ID before launch setting.
Tracked-On: #4641
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
There are no board/scenario/uos_launcher attributes for created
scenario and launch settings, which causes xml mismatch error
when generating configuration files or launch scripts.
This patch is to add the attributes for scearnio and launch
settings.
Tracked-On: #4641
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Add max VM count check when generating scenario XML file.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Refine some items for configuarable="0"
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Add 2 UUIDs for post-launched Standard VM.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Add SOS_IDLE for SOS cmdline so that "idle=halt" paramter will be needed
only when CPU sharing is enabled;
Tracked-On: #4329
Signed-off-by: Victor Sun <victor.sun@intel.com>
Enhance and fix some typos in the text that gets printed out from the
board_parser.py script.
Tracked-On: #4630
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Remove sdc2 scenario since the VM launch requirement under this scenario
will be satisfied by industry scenario.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Leave HV_RAM_SIZE/HV_RAM_START default to blank, and config tool would
generate for them, otherwise, they would be set by the UI.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Leave HV_RAM_SIZE/HV_RAM_START default to blank, and config tool would
generate for them, otherwise, they would be set by the UI.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Set default value for HV template.
2. Refine vuartx in template vm setting xmls.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. modify epc_section to configurable="0".
2. add 'idle=halt' for sos bootargs to impove performance.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
UI got syntax warning while loading new logical partitons xml, add
missed '</clos>' for it.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Currently, '--out' is relative scripts run dir if it gets relative path,
Refine '--out' to source root tree if it gets relative path.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Pre-Launched VMs need the vbar_base values pre-populated
for pass-thru PCI devices.
This patch moves the pci parser logic from board_cfg_gen to library
so that scenario_cfg_gen scripts can use pci parser routines while
generating pci_dev file logical partition scenario.
Tracked-On: #4666
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
The patch enables CPU sharing feature by default, the default scheduler is
set to SCHED_BVT;
Tracked-On: #4661
Signed-off-by: Victor Sun <victor.sun@intel.com>
gcc in latest clearlinux enabled the pointer-sign warning as
default. This breaks the acrn-crashlog build.
Make acrn-crashlog build issue fixed by convert to correct
pointer type.
Tracked-On: #4636
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
The template xmls are used to be the dafault VM settings for dynamically
adding VMs.
Tracked-On: #4641
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
config app implements interfaces to dynamically:
create new scenario settings based on tempaltes;
create new launch settings based on templates;
add or delete VMs for scenario settings;
add or delete VMs for launch settings;
load default scenario or launch settings
Tracked-On: #4641
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com
Reviewed-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
To keep align hv source code changes, config tool doese below changes:
1. Remove UUID from scenario config files.
2. Remove severity from scenario config files.
3. Use vm type to instead load order type.
4. Use the mapped UUID data base for launch vm script configurations.
5. Unify the ui_entry_api for '--out'
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Use vm_type to instead combination of load_type/uuid/severity in config
xmls.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
As it doesn't depends on the scenario, there are sos/pre launched VMS
in config xmls, emulate vhostbridge for sos vm, specify the pass-thru
PCI device for pre launched vm.
Add support to parse pci_devs for pre launched vm.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Add pass-thru PCI device for pre launched vm section in config xmls.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
For purpose weaken 'scenario' from config tool, remove 'scenario' dependency
from config tool.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
1) fix a bug,resend shutdown cmd only send one character
2) move out accept routine from while loop, let this thread
can read data from acrn-dm continuously.
Tracked-On: #4446
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Yuhong Tao <yuhong.tao@intel.com>
Reviewed-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
main.c is compiled while version.h being generated. This will
result following error:
| main.c: In function 'main':
| main.c:95:5: error: 'AP_MAJOR_VERSION' undeclared (first use in this function)
| 95 | AP_MAJOR_VERSION, AP_MINOR_VERSION,
| | ^~~~~~~~~~~~~~~~
| main.c:95:5: note: each undeclared identifier is reported only once for each function it appears in
| main.c:95:23: error: 'AP_MINOR_VERSION' undeclared (first use in this function)
| 95 | AP_MAJOR_VERSION, AP_MINOR_VERSION,
| | ^~~~~~~~~~~~~~~~
| main.c:96:5: error: 'AP_BUILD_VERSION' undeclared (first use in this function)
| 96 | AP_BUILD_VERSION, AP_BUILD_USER,
| | ^~~~~~~~~~~~~~~~
| main.c:96:23: error: 'AP_BUILD_USER' undeclared (first use in this function)
| 96 | AP_BUILD_VERSION, AP_BUILD_USER,
| | ^~~~~~~~~~~~~
| main.c:97:5: error: 'AP_BUILD_TIME' undeclared (first use in this function)
| 97 | AP_BUILD_TIME);
| | ^~~~~~~~~~~~~
Similar issues observed with usercrash too.
To fix this, add version.h header as dependency, to make sure
it is generated successfully.
Tracked-On: #4590
Signed-off-by: Naveen Saini <naveen.kumar.saini@intel.com>
config app supports hv config in scenario setting UI.
Tracked-On: #4634
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Acked by: Terry Zou <terry.zou@intel.com>
Update the board defconfig to scenario config xmls, and user can configure
it from webUI.
Tracked-On: #4634
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Board defconfig depends on hypervisor configurations and vm configurations,
add this to support to parse board defconfig from vm configuration.
Tracked-On: #4634
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Modify launch config tool to support passthroug GVT for WaaG by default.
Tracked-On: #4625
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Rounding HI_MMIO_START, HI_MMIO_END to the closest 1G. This avoids
round up logic in the hypervisor.
Tracked-On: #4586
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Launch config should relay on library/common.py and launch_cfg_lib,
then remove the duplicate parameters and functions.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Scenario config should relay on library/common.py and scenario_cfg_lib,
then remove the duplicate parameters and functions.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Board config should relay on library/common.py and board_cfg_lib, then
remove the duplicate parameters and functions.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
For purpose to refine the library/common and xx_cfg_lib, should have
to expands parameters and functions to common.py firstly.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
This patch does the following
1) Removes the limitation on BAR size for 1 GB
2) Align the BAR address to the BAR size
Tracked-On: #4586
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
As we did in commit: 697f3fc09f, need
to update IOMEM_INFO for tgl-rvp.
Tracked-On: #4582
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Added "vcpu_clos" to configuration XML, here is an example of VM2 with 2 vCPUs:
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
<vcpu_clos>1</vcpu_clos>
<vcpu_clos>0</vcpu_clos>
</clos>
A macro will be generated in vm_configuration.h:
#define VM2_VCPU_CLOS {1U, 0U}
And the macro will be used in vm_configuration.c:
struct acrn_vm_config vm_configs[CONFIG_MAX_VM_NUM] = {
...
{
...
.clos = VM2_VCPU_CLOS,
...
}
}
Tracked-On: #4566
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Find the 64-bit mmio window from /proc/iomem to generate HI_MMIO_START/HI_MMIO_END.
Tracked-On: #4569
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Replace SYSTEM_INFO with IOMEM_INFO for board xml files.
Tracked-On: #4569
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Need more information from iomem, so dump all the iomem information
from /proc/iomem to instead of system ram information.
Tracked-On: #4569
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Currently, config tool generate board files and scenario files in
acrn-hypervisor directory, the origin souce code would be corrupted by
the config tool. Config tool add '--out' option for user to give a path
to store the generated files, without this option, tool will generate
files in origin source code.
Tracked-On: #4517
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Correct mismatch PCI audio device for passthrough in nuc6cayh.
Tracked-On: #4530
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Modify the pattern to grap the correct PCI BDF from board information
file.
Tracked-On: #4530
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. add CONFIG_scenario=y config in $(BOARD).config file so that
SCENARIO parameter will not be needed when build with xmls.
2. add CONFIG_MAX_KATA_VM_NUM;
3. add CONFIG_ENFORCE_VALIDATED_ACPI_INFO=y because all ACPI info
generated by acrn-config has been validated;
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Remove '--enable_commit' argument since acrn-config will not use git tool any
more.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Currently we use separate button to generate board configuration files and
scenario configuration files for hypervisor, this is not friendly from UX
perspective. So remove redundant button on HV configuration generation.
Tracked-On: #3854
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Shuang Zheng <shuang.zheng@intel.com>
This commit creates the folder for hosting the temporary scenario .xml files if the folder doesn't exist to avoid the FileNotFound python exception.
Tracked-On: #4522
Signed-off-by: Tonny Tzeng <tonny.tzeng@intel.com>
UEFI pass option as unicode string to efi-stub. That string has
no end charactor ('\0'). Insteadly, the option has string size
and we should use the string size to decide the end of the option
string.
Tracked-On: #4520
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zide Chen <zide.chen@intel.com>
Fix links in documentation that have moved (e.g.,
clearlinux.org/documentation moved to docs.01.org/clearlinux/latest).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
If the bus number is not 0, then malloc a virtual slot for the device,
meanwhile, it should be added to PT_SLOT for the next query, otherwise
the passthru parameter would be lost in the launch script.
Tracked-On: #4494
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
commit a68f655a11 added two extra header
include in pci_dev.c for logical_partition scenario but acrn-config did
not handle that.
This patch fix the issue.
Tracked-On: #4492
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. To keep align with acrn-hypervisor source code, remove a function
that generates ve820 file.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Refine HV_RAM_START to keep 2M memory align for new board config.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. If the device configure space is not fixed by ACPI and its pbar address
is above 4G or lower than 2G, then remap the vbar address to high memory.
2. Due to GPU might have huge MMIO space which would result in
HV_RAM_SIZE overflow, skip its vBAR remapping for now when the size high
than 1GB.
Tracked-On: #4458
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. refine vm number macro from scenario config.
2. add sanity check for load order.
Tracked-On: #4458
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Currently the life_mngr daemon has supported:
listen from the SOS shutdown command,
this patch add support listen shutdown command from RTVM.
and this life_mngr daemon can also run on SOS for listening
shutdown commond from acrn-dm(triggered by RTVM).
Tracked-On: #4446
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yuhong, Tao <yuhong.tao@intel.com>
Acked-by: Yan, Like <like.yan@intel.com>
Since there is no RTVM requirement for sdc2 scenario, replace uuid
495ae2e5-2603-4d64-af76-d4bc5a8ec0e5 which is dedicated to RTVM with
615db82a-e189-4b4f-8dbb-d321343e4ab3
Tracked-On: #4472
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The SOS_BOOTARGS_DIFF which defined in config xml has included most diff
bootargs, so the prints in vm_configuraton_h.py is redundant and would
cause wrong boot param for SOS VM.
Tracked-On: #4470
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch adds support for,
1. Storing MBA resource and its max supported clos value
in the target xml file under clos subsection.
2. Generating board.c file with MBA RDT resource.
Tracked-On: #3725
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
- remove .data and .text directives. We want to place all the boot data and
text in the .entry section since the boot code is different from others
in terms of relocation fixup. With this change, the page tables are in
entry section now and it's aligned at 4KB.
- regardless CONFIG_MULTIBOOT2 is set or not, the 64-bit entry offset is
fixed at 0x1200:
0x00 -- 0x10: Multiboot1 header
0x10 -- 0x88: Multiboot2 header if CONFIG_MULTIBOOT2 is set
0x1000: start of entry section: cpu_primary_start_32
0x1200: cpu_primary_start_64 (thanks to the '.org 0x200' directive)
GDT tables
initial page tables
etc.
Tracked-On: #4441
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Currently config tool generated 'console=/dev/ttySn' in boot cmdline
for logical_partiton scenario, need to strip '/dev/' to avoid kernel
boot issue.
Tracked-On: #4451
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Devices that support SR-IOV can expose their capabilities in
lspci -vv command as below. The offline tool, instead of picking
up the bios exposed memory region(bc000000) for the devices ends
picking up the SR-IOV memory region(00000000c0000000) and generates
VBAR address (in pci_devices.h). This is incorrect. This patch
fixes the offline tool to take the right memory region as the
VBAR address.
Sample lspic -vv log:
67:00.0 Ethernet controller: Intel Corporation Ethernet Connection
X722 for 10GbE backplane (rev 09)
Subsystem: Intel Corporation Device 0000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
Latency: 0
Interrupt: pin A routed to IRQ 61
Region 0: Memory at bc000000 (64-bit, prefetchable) [size=16M]
Region 3: Memory at c1000000 (64-bit, prefetchable) [size=32K]
Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV)
IOVCap: Migration-, Interrupt Message Number: 000
IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
IOVSta: Migration-
Initial VFs: 32, Total VFs: 32, Number of VFs: 0, Function Dependency Link: 00
VF offset: 16, stride: 1, Device ID: 37cd
Supported Page Size: 00000553, System Page Size: 00000001
Region 0: Memory at 00000000c0000000 (64-bit, prefetchable)
Region 3: Memory at 00000000c1020000 (64-bit, prefetchable)
VF Migration: offset: 00000000, BIR: 0
Tracked-On: #4443
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patches removes the unused CLOS_required flag from the
offline guest configuration tool.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch updates existing <$BOARD$>.xml for RDT support.
If the platform supports RDT, the resource and MAX CLOS
value is generated, else the CLOS_INFO is set to empty.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch checks if RDT feature is supported by platform and
updates the CONFIG_RDT_ENABLED flag in the <$BOARD$>.config
file accordingly.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch adds support for as generating board.c file
with multiple RDT resources.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
and vm configuration
This patch adds support for,
1. Providing list of max supported CLOS value that is common
between all RDT resource to user when configuring scenario xml.
2. Validate and set the clos value in the vm_configuration file.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
value among RDT resources.
This patch identifies the least common supported clos value
from multiple RDT resource. This is done so as to have
consistent capabilities across all resource allocations.
From SDM, "The number of CLOS supported for the MBA feature
may or may not align with other resources such as L3 CAT. In
cases where the RDT features support different numbers of
CLOS the lowest numerical CLOS support the common set of
features, while higher CLOS may support a subset. For instance,
if L3 CAT supports 8 CLOS while MBA supports 4 CLOS, all 8 CLOS
would have L3 CAT masks available for cache control, but the
upper 4 CLOS would not offer MBA support. In this case the upper
4 CLOS would not be subject to any throttling control. Software
can manage supported resources / CLOS in order to either have
1) consistent capabilities across CLOS by using the common subset
or 2) enable more flexibility by selectively applying resource
control where needed based on careful CLOS and thread mapping".
We decided to go with option #1, as it will be more consistent
and less prone to user errorw hen programming the resource mask
MSRs.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
xml file
This patch adds support for parsing RDT resources and
its max clos, max supported mask values from the target xml file.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch adds support for storing multiple RDT resource
and its max supported clos value in the target xml file under
clos subsection.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The slot in launch config would be conflicted when the same bdf is
selected from webUI.
This patch do the below condition to avoid such case:
1. Add the bdf check for pass-through devices.
2. Use the bus:dev:func as passthru device option in launch config.
v1-v2:
1. If BUS of PCI device for passthru is not 0, then alloc a virtual
slot for it.
Tracked-On: #4312
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
KATA VM is not supported on dual-core systems override the
MAX_KATA_VM_NUM to 0.
Tracked-On: #4319
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
apl-mrb need to access P2SB device, so add 00:0d.0 P2SB device to
whitelist for platform pci hidden device.
Tracked-On: #3475
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
- python script crashes if the desired 'clos' tag doesn't exist in the
scenario xml file. In the following example, tag '0' doesn't exist:
clos_set: {1: '0', 2: '0'}
referring to tag 0 directly ("vm_info.clos_set[0] == None") causes crash.
To fix it, this patch uses "if i in vm_info.clos_set:" where 'i' is the
VM id and serves as the tag in the clos_set dictionary, to sanity
check the dictionary.
- if the hardware doesn't support CAT, don't need to generate clos entry
in the vm_config[], which could be confusing.
- to reduce redundant code, wrap the clos generation code as a function.
Tracked-On: #2462
Signed-off-by: Zide Chen <zide.chen@intel.com>
Currently, config tool will maintain a whitelist for the board which
need to hide some pci devices. For the board out of whitelist, we set
MAX_HIDE_PDEVS_NUM to 0.
Tracked-On: #3475
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
/proc/cpuinfo represents online CPUs only, and the number of CPUs is
limited by the 'maxcpus' option.
/sys/devices/system/cpu/possible is a better option for our purpose
since it represents the possible CPUs that can ever be available in the
system, including the offline CPUs. And it's not limited by 'maxcpus'.
Though the Linux command line parameter nr_cpus and possible_cpus still
have impact on /sys/devices/system/cpu/possible.
Tracked-On: #3854
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Split the input message for 'virtio-net' would discard extra
message from user input, this is not expected for 'virtio-net' setting.
Tracked-On: #4298
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add support to parse and get 'cpu_sharing' item value
from launch config files, these values are editable by user.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Launch script should be set to 'Disabled'/'Enabled' from webUI while
hv enabled/disabled the cpu sharing.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
- commit 69152647 ("hv: Use virtual APIC IDs for Pre-launched VMs")
enables virtual APIC IDs for pre-launched VMs thus xapic_phys is no
longer needed to force guest xAPIC to work in physical destination mode.
- HVC is not available in logical partition mode and "console=hvc0" should
be removed from guest Linux bootargs.
Tracked-On: #3854
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add missed definition of 'logger_setting' into launch script.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Previous launch config tool doesn't handle the situation that
'virtio-blk' is set with rootfs partition with rootfs image,
in such scenario, VM would be failed to start when launching
This patch refine the mount device while use rootfs partiton and image
from vritio block device.
Tracked-On: #4248
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
UOS would be failed to get ip address, add 'tap_' perfix for virtio-net
name setting.
Tracked-On: #4255
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add this check while validating audio/audio_codec for pass-through
device setting.
Tracked-On: #4249
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The 'vuart1' item is selectable from webUI, but in some case user
might select vuart1 in industry scenario by mistake. If config tool
set them in vm configurations directly without checking, the
hypervisor might be failed to boot.
This patch will check such case and set the correct vuart1 in vm
configurations.
Tracked-On: #4247
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
scenario_cfg_lib.py:
- removed extra white space before ','
pci_dev_c.py:
- follow style in other files, added two empty lines
- removed extra line at the end of the .c file
vm_configurations_c.py
- alignment
vm_configurations_h.py
- alignment
Tracked-On: #3602
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Modify the hpa start size value for logical_partition scenario to avoid
build issue, and make the memory size of pre-launched VM configurable.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add support to parse 'severity' item tag from webUI and set them into
scenario configurations.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
To keep align hypervisor source code for scenario config, need add
the 'severity' item tag into scenario config files.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Currently kata vm is supported in SDC scenario by default, both vm1
and kata vm would share pcpu id 3 for vcpu affinity even when cpu
sharing is not enabled.
Remove pcpu id 3 from vm1 in SDC scenario config xmls.
Tracked-On: #4286
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Hv could be failed when hv ram start address when around 16, beacause when
booting from grub mode, hv and sos ram address would be overlaped.
This patch set the HV_RAM_START address above 256M for new board.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add missing 'ramdisk_mod' item tag of industry config xml for tgl-rvp.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Set the DRHDx_IGNORE to false even there is no DEV_SCOPE under this
DRHD.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add CONFIG_SERIAL_x in $(borad).config, this will help to output
console log and help new board debug.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Some VMs don't need pci-gvt args or or need specific configuration
for 'gvt_args' item tag, this patch changes from selectable behavior to
editable for 'gvt_args' item from webUI.
2. Modify the description for gvt_args item tag from launch config xmls.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
For currently supported hardware such as KNL NUC, the scenario xml
file is not generated and the newly added non-contiguous variables
will not be present. This can lead to build issues. This patch adds
the second non-contiguous HPA variable to all supported hardware
for both logical_partition and hybrid modes. It also adds checks
to ensure that HPA2 is valid before using it while creating the
guest VM ve820.
Tracked-On: #4242
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The macro definition is changed in hypervisor code, so modify acrn-config
side accordingly.
Tracked-On: #4230
Signed-off-by: Victor Sun <victor.sun@intel.com>
SOS vm only support legacy serial port emulation, so we need to
hide non-legacy serial ports from webUI when user want to select
serial port as SOS console.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. unify get_vuart_info_id/get_vuart_id api in board/scenario/launch
config tool.
2. if vm use 'vuart1(tty)' method to power off, make sure this vm have
select the vuart1 'SOS_COM2_BASE'.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add pm_channel support to parse and get 'poweroff_channel' item value
from launch config files, these values are selectable by user.
Tracked-On: #4212
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some vm need power off method, so modify 'poweroff_channel'
item in the launch config files that user could select them from webUI.
Tracked-On: #4212
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Some vm need mediator of 'virtio-console', so add 'console' item
into 'virtio_devices' leaf that user could edit them from webUI.
2. Add 'vuart0' item to enable/disable serial console emulation by
device model.
Tracked-On: #4186
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add virtio-console mediator support to parse and get 'virtio-console' item value
from launch config files, these values are editable by user.
Tracked-On: #4186
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch fixes an issue with generation of guest ve820 when the size
of the memory is >512MB. The issue is primarily with respect to converting
between hex and int.
Tracked-On: #4219
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The patch adds acrn-config tool support for adding
non-continguous HPA allocations for pre-launched VMs
in hybrid scenario.
Tracked-On: #4217
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Normally, we care more about the current trace data than
buffered old data. So, this patch set FLAG_CLEAR_BUF by
default and adds one new option '-r' to unset the FLAG_CLEAR_BUF
if we want to capture the buffered old data.
---
v1 -> v2:
Add 'deprecated' mark to '-c' option
Tracked-On: #4175
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
This patch adds one new option '-a' to specify the cpus where we should
capture the trace data. If the this option is not set or set with wrong
optarg, we will capture the trace data of all possible cpus.
The set of the cpus can be specified as A,B,C, or A-C, or A,D-F, and so on.
Tracked-On: #4175
Acked-by: Yan, Like <like.yan@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
It is better to output it using float instead of int. Otherwise, we will
get '0 sec' for total run time if it is less than one second.
Tracked-On: #4175
Acked-by: Yan, Like <like.yan@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
The key in the list is unique. So, it is better to break the loop
when find the matching key instead of traversing the whole list.
Tracked-On: #4175
Acked-by: Yan, Like <like.yan@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Originally, we assume that the vmenter will sit at the first line
of the trace file. But if the vmexit comes earlier than vmenter.
The total vmexit cnt will be set as 0 by the first vmenter.
This patch fixes the issue by:
- Search the trace file to find the first vmexit entry and start to analyze here
and mark the TSC_BEGIN as the tsc of this vmexit.
- Inc the total vmexit cnt by 1 when meet the vmexit entry.
- Calc the vmexit duration when meet the vmenter in pair with the last vmexit.
Tracked-On: #4175
Acked-by: Yan, Like <like.yan@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
This is to make acrn config UI supports to edit more than one virtio
input devices in multi-lines.
Tracked-On: #4163
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Add the below flags, they are needed in -O2:
-fno-delete-null-pointer-checks:
* tells the compiler NOT to assume that null pointer deference does
not exist.
* Without this flag, below case cannot be detected:
a pointer might point to nullsometime during run-time and if there
is no validation for that pointer, it will cause the program to crash.
Since we don’t receive an error message saying that a pointer is
pointing to null, we will have a hard time trying to find the problem.
-fwrapv:
* tells the compiler that signed overflow always wraps.
* Without this flag, x + 10 > x will always be true for signed x.
With the flag, x + 10 > x is not always be true, as the overflow is
defined for x, and it could wrap.
Tracked-On: #4194
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
This patch modifies the python scripts in scenario,
board and vm-configuration to support,
1. Generation of seperate ve820 for each VM.
2. Ability to configure each VM's HPA from
acrn-config UI tool.
3. Non-contiguous HPAs for pre-launched VMs.
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Tracked-On: #4195
Acked-by: Anthony Xu <anthony.xu@intel.com>
P-state scaling driver is present
There seems to be a corner case where target xml file
fails to get generated if there was no P-state scaling driver
or C-state idle driver present. This patch addresses it by
handling the file not present exception and setting a warning
as well a "not available" string to successfully generate
target xml file.
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Tracked-On: #4199
Acked-by: Victor Sun <victor.sun@intel.com>
1. Use acrn-configure tool to generate xml files to support TGL
RVP board. You need make menuconfig as guide in github, and then
comiple as following:
make hypervisor BOARD_FILE=path/xxx.xml SCENARIO_FILE=path/yyy.xml
2. Also uos launch script can be generated by acrn-configure tool with the
uos luanch xml file
Tracked-On: #4181
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Pre-launched or SOS VMs could use ramdisks to boot. This
patch adds acrn-config tool support to parse such use-case
scenario xmls.
Tracked-On: #4197
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch adds ramdisk_mod tag to all supported boards and
logical partition, hybrid, industry and sdc xmls
Tracked-On: #4197
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
modify the description of usb xhci about the input format.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add virtio-net mediator support to parse and get 'virtio-network' item value
from launch config files, these values are editable by user.
Tracked-On: #4185
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some vm need mediator of 'virtio-net', so add 'virtio-network'
item into the launch config files that user could edit them from webUI.
Tracked-On: #4185
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add virtio-block support to parse and get 'block' item value
from launch config files, these values are editable by user.
Tracked-On: #4172
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
remov rootfs_dev and rootfs_img item and replace them with vritio-blk
item.
The format for virtio-blk:
[blk partition:][img path] e.g.: /dev/sda3:./a/b.img
For vbootloader of ovmf: [img path] e.g.:./a/b.img
Tracked-On: #4172
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
We have changed the cpuid trace-entry in HV to trace
the leaf and subleaf of cpuid. This patch modifies the
format accordingly.
Tracked-On: #4175
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Current ve820 generation script assumes the size of pre-launched
VM memory is less than or equal to 512 MB (Must be the assumption
of logical partition scenario as such).
This patch extends the script to handle pre-launched VM memory
sizes greater than 512 MB.
Tracked-On: #4182
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Parse MMCFG base address value and store it to board config xml
as DEFAULT_PCI_MMCFG_BASE macro.
Tracked-On: #4173
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
parse default pci mmcfg base address from target board.
Tracked-On: #4173
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The function of get_leaf_tag_map(info_file, prime_item, item='') in
launch_config_lib.py is redundant and it will be called incorrectly
when generating the launch script. This patch remove the function.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
In current implementation, we only support OVMF as vbootloader, so
set vbootloader attributes to readonly in related XMLs to avoid issues.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Current epc_section base/size vaule missed vm id so the configure item is not
working, the patch will fix this issue.
Tracked-On: #4165
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
launch config
Add USB xHCI mediator support to parse and get 'usb_xhci' item value
from launch config files, these values are editable by user.
Tracked-On: #4164
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some vm need USB xHCI mediator support, this patch add 'usb_xhci' item
to the launch config files that user can edit it from webUI.
Tracked-On: #4164
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
config
Add support to parse and get 'virtio-input' item value from launch config
files, these values are editable by user.
Tracked-On: #4163
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some vm need mediator of 'virtio-input', so add 'virtio-input' item
into the launch config files that user could edit them from webUI.
Tracked-On: #4163
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some API calls have the same function in library config,
the patch refines the API calls.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Skip to generate DRHDn_IGNORE to board.c, when there is no device scope
type on target platform DRHD definition.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
There may be more than one PCI segment in target board, and DRHD info
should be parsed correctly base on secondary PCI bus. currently
board_parser.py tool did not handle such case.
Add this patch for walking secondary PCI Bus.
Tracked-On: #4143
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Refine the DmarDevScope struct and some class names.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Support to config kata vm in webUI, this need to modify 'configurable' attribute
to '1' in vm item.
Tracked-On: 4145
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
add UI to add or remove Kata VM for sdc scenario, the added Kata VM
is based on the generic config xml.
Tracked-On: 4145
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
1. The vcpus of UOS are configured in vm configuration, they should be offlined from
sos before vm start.
2. retry offline cpu for all UOS type.
3. uos image name will be based on vm name instead of input parameter.
4. correct the unexpected token ';;' in launch config.
Tracked-On: #4145
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
For SDC scenario, support kata vm would be triggered from webUI, and
will store the kata vm information to the scenario config file.
Then, vcpu affinity/number should be refined for vm1 and kata vm.
Note: with this patch, user should add/remove the kata vm in SDC
scenario webUI and its number should match MAX_KATA_VM_NUM in
hypervisor/arch/x86/Kconfig.
Tracked-On: #4145
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Currently MMIO BAR size not support size above 4G,
print warning to user to set the MMIO size in 4G region from BIOS.
Target-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Minor changes on git commit message of config patch:
For board config patch, specify with "config patch for board xxx";
For scenario config patch, specify with "config patch for scenario yyy".
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add a Kconfig parameter called UEFI_OS_LOADER_NAME to hold the Service VM EFI
bootloader to be run by the ACRN hypervisor. A new string manipulation function
to convert from (char *) to (CHAR16 *) has been added to facilitate the
implementation.
The default value is set to systemd-boot (bootloaderx64.efi)
Tracked-On: #2793
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
There may be no physical serial port in the target board, and it will
stop generating board file, the patch add support to handle such case.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
If S3/S5 are not support by BIOS in some platform, will set them to 0
as default.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Return correct key of vuart base to webUI for parsing.
Tracked-On: #4128
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The *.mk files under misc/acrn-config/library are all rules for hypervisor
makefiles only, so move these files to hypervisor/scripts/makefile/ folder.
The folder of acrn-config/library/ will be used to store python script lib only.
Tracked-On: #3779
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Terry Zou <terry.zou@intel.com>
Current board parse logic would be broken if acpi_idle/acpi-cpufreq
driver is not loaded by native kernel.
This patch would just leave a warning to user and continue to parse
other information in this case.
Tracked-On: #4082
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Previous code parse the Cx value by hardcoded position in sysfs desc
node, but this might be changed in different kernel.
This patch will parse the Cx value position by index key word like
MWAIT/IOPORT.
Tracked-On: #4074
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
If pttyS1 do not exist, we can alloc irq for vuart1, but if pttyS1
exist, we should reuse the irq of pttyS1 to keep compliance.
Tracked-On: #4073
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Move hypervisor related include path from CFLAGS to INCLUDE_PATH to make
structure more clean.
Tracked-On: #3779
Signed-off-by: Victor Sun <victor.sun@intel.com>
We now have four methods to configure board and scenario when
build acrn (sorted with priority):
1. Change them with "make menuconfig" in hypervisor directory
2. Give baord_file/scenario_file as make command parameters
3. Give BOARD/SCENARIO as make command parameters
4. Use BOARD/SCENARIO default value defined in Makefile file
With this patch, we make sure we follow priority exactly.
Tracked-On: #4067
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Victor Sun <victor.sun@intel.com>
Currently make hypervisor will depend on a $(BOARD).config file to load
board defconfig which triggered by oldconfig process, this will block
make from XMLs for a new board because $(BOARD).config never exist.
This requires us to patch configuration for new board earlier than make
oldconfig.
Tracked-On: #4067
Signed-off-by: Victor Sun <victor.sun@intel.com>
without the msr.h file the build will be failed when CAT is enabled.
Tracked-On: #4066
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
For vuart1, if it's mapped to a real native serial port, we must
re-use the native serial port io base and irq number. If no native
serial port is mapped to vuart1, non-exist io base and irq should
be used.
Please note: UOS launch script may need be updated according to
which serial port index is used by vuart1.
Now, we are using ttyS1 of SOS for vuart1 in our release. User may
need to remap vuart to different ttySx by following above rule if
ttyS1 in user platform is used by other devices like Bluetooth/Wifi.
Tracked-On: #4016
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-On: Victor Sun <victor.sun@intel.com>
Enable xhci usb mediator for whl-ipc-i5/whl-ipc-7 and KBL NUC for LaaG
and WaaG.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Enhance the $(board).config for new board.
Serial config should be set in $(board).config for new board.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
mem_size should be set from xml, it should not be overrided dynamically.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
interrupt_storm should be enabled while passthrough device was set.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add support to generate launch script for whl-ipc-i5/whl-ipc-i7.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. run_cotainer is linux type uos, remove related runC script from
unnercessary luanch script.
Tracked-On: #3930
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add board/scenario/launch config files for whl-ipc-i7.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add board/scenario/launch config files for whl-ipc-i5.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
keep_gsi is needed as a workaround for the device that support both
MSI and legacy interrupt, so keep the flag for Android only because
it is not sure for some wifi/audio device on other Linux guest.
Tracked-On: #3956
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Parse DRHD_INFO section from board config xml, and generate dmar
structure information to board.c
2. Copy macro of DRHD_INFO from board config xml to $(board)_acpi_platform.h
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Since msr_index relys on the MSR_IA32_L2_QOS_MASKn(n:max to 3)
macro which defined in hv source code, generate array that CLOS number
more than 4 means need define more than 4 macro.
This patch solve such issue by using MSR_IA32_L2/L3_MASK_BASE with the
msr index offset.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The DRHD_INFO section should be updated with the refinement patches for
parsing DMAR table.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Initialize DRHDn_DEVSCOPEn_TYPE/DRHDn_DEVSCOPEn_ID for each devscope;
2. Remove DRHDn_IOAPIC_ID macro;
2. Refine the value format from base 10 to 16.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Previous DRHD and device scope number are hard coded to 4, this patch removes
the limitation and parse the real drhd count/devscope count dynamically.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The DRHDx_IGNORE should be defined to true when DRHD device BDF equal to
the given CONFIG_GPU_SBDF.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Now ACRN support more and more platforms. However, the default configuration only
support board which memory is less than 16 GB. If a board memory is large than
16 GB, the developer needs to configure the memory configuration according to his
board. Otherwise, the boot will fail. This's because UEFI BIOS will use the high
memory as possible.
This patch try to allocate the memory as eraly as possible. So that the BIOS will
not access this region.
Tracked-On: #4007
Signed-off-by: Li Fei1 <fei1.li@intel.com>
As vm3 for industry scenario was removed from scenario config, so
modify the uos id to proper id.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
We should use launch_$(uos type) for launch function name instead of using
launch_$(board name).
Tracked-On: #3931
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
add mem_size parameter for acrn-dm while generating launch script.
Traked-On: #3932
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Add the character of quotation marks for launch vm script.
2. Audio codec should put together with audio devcie and pass to
vm , otherwise report an error message to webUI.
Tracked-On: #3937
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The VM2 of INDUSTRY scenario need 2 vCPUs for performance, so there would
be no available pCPU for VM3, need to remove VM3 for this scenario.
Tracked-On: #3925
Signed-off-by: Victor Sun <victor.sun@intel.com>
The previous method to handle ttyS info has an assumption that PCI
serial devices are all mmio type, this caused incorrect BDF info in
board XML file.
This patch fix this issue by dropping serial device BDF info and
replace it with IO type.
Tracked-On: #3900
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Filter out the wifi/ethernet device from webUI with below PCI device class coding rule:
ethernet: 0200/0280;
wifi: 0280/0d20/0d21/0d80;
Tracked-On: #3917
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
fix the issue that there is no error message displayed in launch setting of WebUI.
Tracked-On: #3913
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Fix the wrong 'key' type of error list returned to webUI for parsing.
Tracked-On: #3913
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some BIOS does not support s3/s5, so there might be no _S3 or _S5
package in host ACPI table, previous code did not handle this, so
the build would be failed with the generated board file.
Set default s3/s5 package value to 0 for such case.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Check git environment only when '--enable_commit' option was set.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
For cross-VM S5 notify via vUART, life_mngr service is running on UOS.
It is listening on COM2 to get SOS's commands.
The protocol is: SOS send "shutdown", UOS feedback "acked".
When SOS triggle shutdown, SOS can 1) check VM's status until UOS
stopped, 2) retry shutdown UOS normally with timeout.
So, no matter life_mngr server is running, SOS's shutdown procedure will
properly finish.
Tracked-On: #3564
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Refine the vbootloader type of vm,
The vbootloader type should be select from vsbl/ovmf/none in webUI item.
Tracked-On: #3879
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add the '--windows' option to launch WaaG vm.
Tracked-On: #3880
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
As the blkid info contains 'UUID' information, which easy to lead to
confuse with the vm 'UUID'. So refine the format for block device.
v1-v2:
1). align the style in BLOCK_DEVICE_INFO tag
2). add 'mmcblk1p3' in BLOCK_DEVICE_INFO tag
v2-v3:
1). correct the commit message.
2). refine the api of handle_block_dev
Tracked-On: #3754
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Correct the default settings of ipu/ipu_i2c device for apl-up2.
Tracked-On: #3863
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The audio and Wifi device info in apl-mrb config xmls is wrong, fix it.
Tracked-On: #3863
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The vm name for Preempt-RT Linux is not defined in launch script,
causing Preempt RT linux launch failed.
This patch refine the vm name and define the vm name for Preempt-RT
Linux to fix such kinds of issues.
Tracked-On: #3852
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Sometimes character '-' or space need to be converted to '_' to make string format uniformed.
Add this common api to satisfy such requirment and refine the code for board name generating.
Tracked-On: #3852
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some acrn-dm arguments are not needed when launch some vm, but the
item check fucntion still has strict check on the arguments, which
result in the script generating failure.
This patch add whilte list to skip the check.
Tracked-On: #3852
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The return value of 'strtol()' is not checked properly
in _get_vmname_pid() @acrn_vm_ops.c and parse_opt()@acnrd.c,
the return type of 'strtol' is 'long int', but it is assigned
to a variable with type of 'int' and compared to "LONG_MAX"
and "LONG_MIN", which is always false.
This patch is to fix above error case.
Tracked-On: #3859
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Acked-by: Yan, Like <like.yan@intel.com>
Fixed the issue that parameter of 'boot_audio_option' is lost when
audio/auido codec device is configured.
Tracked-On: #3853
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
There are 2 scenarios to pass through audio/audio_codec:
1. Only pass through audio device to vm.
2. Pass through audio and audio codec device to vm.
The improvement is to generate proper boot audio option for each
scenario.
Tracked-On: #3853
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
some parameters for media_pt function are not needed any more,
remove these redundant parameters.
Tracked-On: #3853
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
'run_container' starts to run the container which contains the
clearlinux rootfs. store it in the same launch script with clearlinux.
Tracked-On: #3811
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Remove '-V' option of launch type while generating launch script.
Tracked-On: #3811
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. enable item check for acrn-dm args which set from webUI input.
2. remove 'cpu_num' tag from launch config xml.
v1-v2:
1). add method to check 'cpu_num'/'mem_size' in config xml.
v2-v3:
1). as 'vcpu_num' configured in scenario, the parameter for acrn-dm is no
longer needed, remove 'cpu_num' tag and its handler from launch config.
2). add 'poweroff_channel' tag for generic config.
Tracked-On: #3811
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Change i915.domain_plane_owners and i915.avail_planes_per_pipe for
hybrid scenario;because kvm based User vm will use PipeA.
Tracked-On: #3840
Signed-off-by: Victor Sun <victor.sun@intel.com>
add a confirmation interface to let user to commit changes into local tree
or not commit after generated source codes in config app.
Tracked-On: #3834
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Config tool will generate files for board/scenaro/launch, some files are
part of souce code for specify board. Git add/commit these files should
be one optional of user experience. Add "--enable_commit" parameter to
enable git add/commit.
usage:
--enable_commit: flag of whether to do git commit the config file changes
to current git branch. Do commit with this flag and not do without the flag.
Tracked-On: #3834
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch is to remove unused info in server.c
Tracked-On: #3787
Signed-off-by: xiaojin2 <xiaojing.liu@intel.com>
Reviewed-by: Liu, Xinwu <xinwu.liu@intel.com>
Acked-by: CHEN Gang <gang.c.chen@intel.com>
fix the issue: some select boxes disappear unexpectly after edited
Tracked-On: #3809
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
According to the new vcpu affinity configuration method, update vcpu
configuration in Web UI from multi-select box to seperated select box
which can dynamically add or delete vcpus with mapped pcpus.
Tracked-On: #3798
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
The pcpu sharing for vm already enabled in master branch, acrn-config
tool for generating scenario config souce file should keep align with master branch.
1. Add 'vcpu_affinity' tag and its vaule in config xml.
2. Parse the 'vcpu_affinity' tag of value from config xml for generating vcpu_affinity.
v1-v2:
1). apl-up2-n3350 has two PCPUs, set appropriate value for vcpu_affinity.
Tracked-On: #3798
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Unify the data type for scenario item.
1. Unified the scenario item, the type modified from list to dictionary.
2. remove some unused function.
3. add 'pci_dev_num'/'pci_devs' to hybrid xml for future support.
Tracked-On: #3798
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
