Add a new field DRHD_MAX_DEVSCOPE_COUNT in board file representing
maximum devscope count in a DMAR structure for statically allocating
drhd_dev_scope array in hypervisor.
Tracked-On: #8494
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Some motherboards exposes MCFG1/MCFG2 instead of one ACPI MCFG table,
thus no /sys/firmware/acpi/tables/MCFG exists but MCFG1 and MCFG2.
Read MCFG1 if MCFG doesn't exist.
The same issue report/fix is at https://github.com/intel/pcm/issues/74.
Tracked-On: #8514
Signed-off-by: Xin Zhang <xin.x.zhang@intel.com>
`modprobe msr` will be invoked if no /dev/cpu/#/msr is found.
If the "msr" module is built-in that check will pass and
no `modprobe msr` should be invoked.
fixes: aeab5a2 ("config_tools: update loading msr driver logic")
Tracked-On: #8410
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
If we use 5.15 kernel on rpl-p platform, some iomem info dumped with
non-ascii characters, then tool will raise a decode error.
So this patch filters non-ascii characters to handle this error.
Tracked-On: #8388
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Commit ce6500893 ("board_inspector: use executables found under system
paths") unintendedly changes how acpi.py invokes `rdmsr` and that impacts
the type of the execution results and causes incompatible method calls when
the results are parsed.
Convert the invocation back to shell-style.
Fixes: ce6500893 ("board_inspector: use executables found under system paths")
Tracked-On: #8315
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Using partial executable paths in the board inspector may cause unintended
results when another executable has the same name and is also detectable in
the search paths.
Introduce a wrapper module (`external_tools`) which locates executables
only under system paths such as /usr/bin and /usr/sbin and converts partial
executable paths to absolute ones before executing them via the subprocess
module. All invocations to `subprocess.run` or `subprocess.Popen`
throughout the board inspector are replaced with `external_tools.run`, with
the only exception being the invocation to the legacy board parser which
already uses an absolute path to the current Python interpreter.
Tracked-On: #8315
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Today users still need to manually copy the RTCT binary file when they want
to passthrough software SRAM to a pre-launched RTVM, which is far from
being user friendly.
To get rid of that step, this patch extracts all information from the RTCT
table and format them in the board XML which is the only file users need to
copy from their target platform to build the hypervisor. The patch that
immediately follows will then use such information to generate vRTCT for
the pre-launched VM.
A side effect of this change is that more ranges, which represents those
reported by RTCT such as the CRL binary or the error log area, will be
added to the `memory` section of the board XML. The `id` attributes of
those range will be used to identify what that range is for. As a result,
getting RAM of the physical platform from the board XML requires additional
conditions on the `id` attributes to avoid counting non-RAM regions
unintendedly.
Tracked-On: #7947
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Modified the copyright year range in code, and corrected "int32_tel"
into "Intel" in two "hypervisor/include/debug/profiling.h" and
"hypervisor/include/debug/profiling_internal.h".
Tracked-On: #7559
Signed-off-by: Ziheng Li <ziheng.li@intel.com>
This patch is about the bug that VMs can't idle.
ACRN enables VM's C-state by extracting host's C-state table.
The C-state table has two types of interfaces: system-IO and mwait. VMs
just need one of them. ACRN can support both.
Currently we are telling users to use the system-IO type. That is, by
adding 'nomwait intel_idle.max_cstate=0' to host Linux's CMD line when
using board_inspector. (The reaseon we were using system-IO is that
mwait was buggy on Apollo Lake.)
But recent tests show that system-IO is somehow buggy. Linux c-state
driver(no matter intel_cstate or acpi_cstate) fails to enter idle state
with system-IO. This can always be reproduced on native environments.
MPERF counters show CPU cores are not in real idle state as expected.
To enable C-state in VMs, we have to switch to mwait.
As ACRN has already supported both system-IO and mwait, we don't have
to modify any code. We just need to tell user to use mwait instead of
system-IO.
That is, don't add 'nomwait intel_idle.max_cstate=0' to host Linux's
CMD line when using board_inspector. Just add 'intel_idle.max_cstate=0'
Due to the Apollo Lake's mwait bug, 'nomwait' is still needed for
Apollo Lake as an exception.
Tracked-On: #7371
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
Many of the license and Intel copyright headers include the "All rights
reserved" string. It is not relevant in the context of the BSD-3-Clause
license that the code is released under. This patch removes those strings
throughout the code (hypervisor, devicemodel and misc).
Tracked-On: #7254
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
category based on different log levels:
1) If the board inspector show CRITICAL error messages, it means that the
board inspector tool exit instantly and generate no file.
2) If the board inspector show ERROR messages, it means that the board
inspector will generate the board XML file successfully, but several conditions
may result in ACRN build or boot failure cannot continue execution due to the error.
3) If the board inspector show WARNING messages, this means that the board inspector
generate the board XML file successfully, but this board XML file is lack of
some feature which could still boot ACRN but loss some features.
4) If the board inspector show INFO messages, this means that board inspector
printed out some normal information.
5) If the board inspector show DEBUG messages, this means that it is used to
debug board inspector workflow.
v1->v2
1. Keep the assertions or exceptions under the acpiparser, inspectorlib
and smbiosparser directory.
2. Exit after all check_deps() completes instead of any unsatisfied dep
is identified.
3. As Amy's advice, Replace the message "{board_xml} saved successfully" with
the message "SUCCESS: Board configuration file <file name> generated successfully
and saved to <path>."
To do:
Print all messages using the colored font.
Tracked-On: #6689
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Improve the logging readibility for the Board Inspector tool by adding
a space after "Error:" and "Warning:" instead of have the text directly
attached to it.
Tracked-On: #6736
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Commit 4a04fcc ("config_tools: skip remapping HW units with no devices under
scope") skips hardware remapping units without any device under its scope in the
config tools, which turns out to only work if the HV is not parsing the DMAR at
runtime.
This patch reverts the previous workaround and fixes the previous issue by
always initializing `dmar_hw_list.hw_ignore` when parsing DMAR. This ensures
that the DRHDx_IGNORE macro will always be emitted while DRHD_COUNT is not
impacted.
Fixes: 4a04fcc ("config_tools: skip remapping HW units with no devices under scope")
Tracked-On: #6709
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Fix a crash in the 'board_inspector.py' tool in case 'cpuid' is not
installed on the system.
The tools crashes because 'cpuid' is used before the check for
dependencies is done in the code. That check for dependencies is
done in the 'legacy/board_parser.py' file. But the native_check()
function that is called before it also expects the cpuid tool to
be installed.
The fix is to move the check for dependencies in the main
'board_inspector.py' file, before any other operation is done.
Tracked-On: #6719
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
It is seen on some platforms that the ACPI DMAR tables will report
remapping hardware units that does not have any device under its scope,
which is not expected by the board inspector previously and thus causes the
tool to generate inconsistent configuration data.
This patch makes the board inspector skip such remapping hardware units. It
does not impact the functionality of the hypervisor as no device is managed
by those skipped remapping units.
Tracked-On: #6709
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
remove the log "<board>.xml has been generated successfully!" in
board_parser.py, because it only mean that the board xml file have
been created sucessfully here, not the all data have been appended
successfully and pretty formatted.
Tracked-On: #6315
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
The subprocess module is needed for calling package from python script.
Add #nosec for subprocess module importing.
Tracked-On: #6342
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
While running in a nested environment, such as qemu, parse the board
information should be allowed even it is not in a native environment.
Replace the error with warning message and does not exit the program.
Tracked-On: #6208
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
For illegal characters, replace original characters with escaped characters in board.xml.
Tracked-On: #6113
Signed-off-by: Kunhui Li <kunhuix.li@intel.com>
This patch adds support to parse RTCT v2 using the refined board XML
schema. The major changes include:
- Add the RTCT v2 parser in the acpiparser module. The version of an RTCT
is detected automatically to choose the right parser.
- Extract software SRAM capabilities of caches into the board XML.
- Move the logic that determines the software SRAM base address for the
pre-launched VM to the static allocator of GPAs.
- Generate software SRAM related macros into misc_cfg.h when necessary.
Tracked-On: #6020
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
'psram' and 'PSRAM' are legacy names and replaced
with 'ssram' and 'SSRAM' respectively.
Tracked-On: #6012
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuang Zheng <shuang.zheng@intel.com>
This patch reorganize the files of the board inspector as follows.
1. Rename the directory name from `target` to `board_inspector`, in order to
align with the name used in ACRN documentation.
2. Move the scripts that generate the current board XML into the `legacy`
sub-directory. The legacy nodes will be removed after transitioning to the
new board XML schema completely,
3. Add the main script `cli.py` which is the command line interface of the board
inspector.
v1 -> v2:
- Rename `run.py` to `cli.py`.
Tracked-On: #5922
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
