And export the API to DM. DM will do system reboot/S3 resume based
on this API.
Also add the pre-assumption description for some vm APIs.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix integer related violations.
V1->V2:
clean all memset/calloc integer violations excpet bsp/boot directory
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently we don't support resume VM in HC API, the real meaning
of the code is to start VM.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. add register_softirq to register a softirq handler
2. rename exec_softirq to do_softirq; raise_softirq to fire_softirq.
3. in do_softirq call registered softirq handler not call
the device softirq handle function directly
4. enable irq after vm exit and disable irq after the first
call do_softirq before vm enter.
5. call do_softirq again when irq disabled to handle the risk
unhandled softirq.
6. rename SOFTIRQ_DEV_ASSIGN to SOFTIRQ_PTDEV
7. remove SOFTIRQ_ATOMIC
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Softirq is not x86 architectural related.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
For data structure types "struct pic and struct iommu_domain",
its name is identical with variable name in the same scope.
This MISRA C violation is detected.
Naming convention rule:If the data structure type is used by only one
module and its name meaning is simplistic, its name needs prefix
shorten module name.
Naming convention rule:Variable name can be shortened from its
data structure type name.
The following udpates are made:
struct pic pic-->struct i8259_reg_state i8259
struct iommu_domain iommu_domain-->struct iommu_domain iommu
V1-->V2:
Update "struct iommu_domain iommu_domain-->struct iommu_domain iommu"
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Instead of using two members for maintaining the state of a VHM request, this
patch replaces the transitions with a single state. Basically the lifecycle of a
VHM request shall be:
FREE -> PENDING -> PROCESSING -> COMPLETE -> FREE -> ...
The structure header of vhm_request has more details of the transitions access
limitations under different states.
Also drop the set but unused member vcpu.ioreq_pending.
For backward-compatibility, the obsolete 'valid' member is still kept and
maintained before SOS and DM adapts to the new state transitions.
v2 -> v3:
* Use complete_ioreq to mark an I/O request finished in
dm_emulate_(pio|mmio)_post.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are some functions for the post work of I/O emulation. This patch moves
these functions to io.c for clarity. No functional change introduced.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently no post-work is done for I/O requests of type PCICFG or WP. The
impacts include:
1. ''valid'' in VHM request buffers are left as 1 even after the I/O request
completes. This violates the pre-condition of acrn_insert_request_wait()
but does not cause failures since a new I/O request can never happen
before the previous one completes.
2. Values read from PCI configuration spaces are never passed to UOS.
This patch adds the post-work for these two kinds of I/O requests. The post-work
for port I/O is invoked for PCICFG since it is essentially a port I/O and the
request structure is compatible. No post-work is needed for WP as it is only
triggered for EPT violations on writes, while post-work is mainly for reads.
v2 -> v3:
* Consistently use 0/1 (not false/true) for the ''valid'' member.
* Add comments to suggest when the hypervisor can see REQ_PCICFG and why
dm_emulate_pio_post also works in such cases.
* Rename: mark_ioreq_done -> complete_ioreq
* Rename: complete_request -> emulate_io_post
* Rename: hcall_notify_req_finish -> hcall_notify_ioreq_finish
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
V1:
In order to remove MISRA C violations for rule
219S, rename functions, macros whose name
starts with "_".
Also removed some __mmio functions because they are
duplicates and are not used anywhere.
Renamed functions like __assert, to asm_assert,
because they were only wrappers around asm calls.
V2:
Over and above the changes on V1, modified bitmap
functions names to lock (corresponding to unlock)
introduced in V1
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Parameter's type which is pointer should not be changed in the
scope of function,assign it's value to local variable to fixed
it out.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The current struct vcpu has two members, namely 'struct vhm_request req' and
'struct mem_io mmio', that hold similar info, including the address, direction, size,
value and status of mmio reqeusts.
As a step towards a unified framework for both MMIO/PIO, this patch unifies
these two members by a tailored version of vhm_reqeust, mostly with the reserved
fields dropped. The definitions to request types, directions and process status
are reused.
Handling errors during emulations will be revisited after the I/O emulation
paths are unified. Thus for this patch the mmio.mmio_status in inherited by
io_req.processed which is not yet properly processed.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Merge mmu_modify with mmu_del to mmu_modify_or_del(..., type).
While type is MR_MODIFY, the actual action is doing mmu_modify; while
type is MR_DEL, the actual action is doing mmu_del.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add hcall_change_vm_page_wp_perm to change guest one page write permission.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
SOS boot with all physicall cpus, before running UOS, it should free
CPU resource by offline not used cpus
- first do standard cpu offline flow
- then call hcall_sos_offline_cpu hypercall to release cpu resource really
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
if defined CONFIG_VM0_DESC, HV will use predefined vm0_desc to config
VM0, otherwise, HV will run VM0 with all physical cpus.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. rename set_vm_memmap to set_vm_memory_region
2. split ept_mmap into ept_mr_add and ept_mr_del
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Added brackets for expression to make it easy to understand and
reduce the mistake of precedence. The rule is applied to the
mixed same level of prevedence opeartors, high level presedence
operators and logical expression.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This is the final cleanup of the integral type related issues, reported by the
static checker, under common/, mostly including
* make explicit the narrowings of vm_ids passed by register.
* work around the confusion of the static checker by abstracting
sub-expressions to local variables.
The remaining reports that are not trivial to suppress will be in the scope of a
separate document.
v1 -> v2:
* Instead of converting vm_ids inside hcall_xxx, update the prototypes of
these functions and do the conversion in vmcall_vmexit_handler.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The error code in the hypervisor is 32-bit signed integers. To reduce implicit
conversions, this patch make hcall_xxx returns int32_t, and finally converts it
to uint64_t when assigned to rax whose semantics is properly defined in C99.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Most of the time, we use the virtual address of EPT PMl4 table,
not physical address.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are many type conversions in the atomic
operations invoking reported by static analysis tool. These
type conversions voilate MISRA C.
To keep uniform naming convention, rename atomic operation
function names:
atomic_set_int/long --> atomic_set32/64;
atomic_clear_int/long --> atomic_clear32/64;
atomic_load --> atomic_load32;
atomic_store --> atomic_store32;
atomic_swap --> atomic_swap32;
atomic_readandclear --> atomic_readandclear32;
atomic_inc --> atomic_inc32;
atomic_dec --> atomic_dec32;
atomic_cmpxchg --> atomic_cmpxchg32;
atomic_xadd --> atomic_xadd32.
Update the type of atomic_load32/64, atomic_store32/64,
atomic_swap32/64, atomic_cmpxchg32/6.
Update related variables and callers.
Note: the type of return value and parameters of atomic_xadd32/64
still keep signed int/long since caller pass
negative variable to atomic_xadd32/64;
V1-->V2:
Add comments for atomic_set/clear to differ from
bitmap_set/clear.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: Junjie.Mao <junjie.mao@intel.com>
MISRA C requires that a 'if' statement followed by one or more 'else if'
statement shall be terminated by an 'else' statement which contains either
side-effect or a comment, to ensure that conditions are considered
exhaustively.
Note that a simple 'if' statement is not required to be terminated by 'else'.
This patch fixes such violations by either refactoring the code or add the
'else' statement with either a comment (describing why this case can be skipped)
or logging the event. It may not be satisfactory for the release version where
logging is no-op, but properly handling these non-trivial cases is out of the
scope of this patch.
v1 -> v2:
* Fix unintended semantic changes in add_(msix|intx)_remapping and
io_instr_vmexit_handler.
* Simplify boolean checks in vpic_ocw2.
* Rephrase the comment in strtol_deci.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the hypervisor, VMCS fields include 16-bit fields,
32-bit fields, 64-bit fields and natural-width fields.
In the current implement, no exec_vmread16/exec_vmwrite16
is for accessing 16-bit fields. So there are many type
casting for the return value and parameters vmread/vmwrite
operations.
Create exec_vmread16 and exec_vmwrite16 functions to
access 16-bit fields in VMCS;
Update related variables type for vmread/vmwrite operations;
Update related caller according to VMCS fields size.
V1--V2:
This is new part of this patch serial to only
update 16-bit vmread/vmread opertions and related
caller.
V2--V3:
Add "hu" for uint16_t argument in log function;
Add comments for function get_vmcs_field;
Update related variables type for exec_vmread16;
Rename temp variable 'low' into 'value'.
V3-->V4:
Few updates for exec_vmread16.
V4-->V5:
Few updates for coding style;
Replace "hux" with "hu" in log function for 16-bit
variable.
V5-->V6:
CPU_REG_64BIT_LAST is used in the vm_get_register and
vm_set_register to make condition statement more
understandable.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
fix integer type violations,keep some violations which
related to hypcall and msix_entry_index.
V1->V2:1.modified API_MAJOR_VERSION from Makefile
2.sync acrn_common.h changed to device model
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed/unsigned conversion should add cast explicitily
or change the type of them to the same.
V1->V2:Fixed the 0U to 0UL because of the mistakes.
V2->V3:remove unsed macro
Signed-off-by: HuiHuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Includes header file of non-static function, and declare the
in-file use function static.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch drops the following useless files in the hypervisor:
* bsp/*/include/: After commit c849bff850 ("HV: config: adapt to the generated
config.h") these headers are obsolete for configuration. Drop the directories
and move the generated version.h under $(HV_OBJDIR)/include.
* all_header.c: This is a temporary file for checking violations in headers,
which is accidentally checked in by commit 3956ce1596 ("HV: io: spell out
explicit narrowing of integers").
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vmid's type prefered to be uint16_t.
V1->V2:vmid from uint32_t transfer to uint16_t
V2->V3:add range check to hcall's vmid parameter
V3->V4:seperate the declaration and actual code.
V4->V5:remove range check from hcall's vmid parameter
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
rename vm_hw_logical_core_ids to vm_pcpu_ids
and changed the type to uint16_t.
V1->V2:rename the vm_hw_logical_core_ids
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1) Change these 5 APIs to void type:
vcpu_inject_pf
uart16550_calc_baud_div
uart16550_set_baud_rate
console_init
ptdev_activate_entry
No need to return 'entry' for ptdev_activate_entry
since the input parameter is 'entry'.
2) no need to check return value for the caller
such as sbuf_put/console_putc/serial_puts/serial_get_rx_data
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
- Trampoline code doesn't have the same relocation delta with HV,
Need to manually patch them when referenced from HV
- replace all references to CONFIG_RAM_START with the actual HV load
address
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
The MMIO/PIO write APIs in io.h always take a uint32_t value but may uses it as
8, 16 or 32-bit integers. This patch converts the prototypes to align with their
functionality.
The pointer conversion and assignment are splitted to separate statements to
prevent static checkers from being confused about the underlying types.
v1 -> v2:
* Change the prototype of mmio-related functions, instead of keeping the
explicit conversions internal. The addresses are kept void* since in most
cases hva (in void*) is passed.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To follow the Misra C standard, doing one assignment per line to
make code is clearly readable and reduces the confusion of its
intetion or typo.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
According to C99 standard, -1 integer constant with 'U/UL'
suffix has no type.
To explicit the integer constant:
Update -1U or -1UL as ~0U or ~0UL, or invalid number according
to usage case.
V1-->V2:
Update parameter name and type of send_startup_ipi since
the second parameter is used as pcpu_id;
Update related comments for code clearity.
V2-->V3:
Update comments of struct acrn_irqline;
rename cpu_startup_dest as dest_pcpu_id in the second
parameter of send_startup_ipi.
Tracked-on: ccm0001001-247033
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It will print error information inside memcpy_s if
the parameteter is invalid, the caller can not check
the return value for memcpy_s/strcpy_s/strncpy_s
code like this:
int a(void) {
return 0;
}
int b(void){
a();
}
fix as follow:
int a(void) {
return 0;
}
int b(void){
(void)a();
}
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
No need to check the return value for memset
code like this:
int a(void) {
return 0;
}
int b(void){
a();
}
fix as follow:
int a(void) {
return 0;
}
int b(void){
(void)a();
}
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are extra type conversion in the HV since cpu_id
type is uint32_t and the return value type of get_cpu_id
is uint16_t. BTW, the name of cpu_id is not clear enough
to express its usage.
So the following updates are made in this patch:
Update cpu_id type as unit_16 to reduce type casting;
Update related temporary variables type;
Update related print argument;
Change the input parameter name of interrupt_init as
cpu_id to keep align with function implement;
Rename cpu_id as pcpu_id as needed.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the hypervisor, virtual cpu id is defined as "int" or "uint32_t"
type in the hypervisor. So there are some sign conversion issues
about virtual cpu id (vcpu_id) reported by static analysis tool.
Sign conversion violates the rules of MISRA C:2012.
BTW, virtual cpu id has different names (vcpu_id, cpu_id, logical_id)
for different modules of HV, its type is defined as "int" or "uint32_t"
in the HV. cpu_id type and logical_id type clean up will be done in
other patchs.
V1-->V2:
More clean up the type of vcpu id;
"%hu" is for vcpu id in the print function.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Misra C required signed/unsigned conversion with cast.
V1->V2:
a.split patch to patch series
V2->V3:
a.change the uint64_t type numeric constant's suffix from U to UL
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch represents TSC freqeuency in KHz using a 32-bit unsigned integer.
The conversion macros between ticks and us/ms are changed to inline functions to
enforce the types of the input parameters. Note that us_to_ticks accepts only
uint32_t (~4K us at most) and never overflows.
Results of some unit tests on the conversion functions:
calibrate_tsc, tsc_khz=1881600
64us -> ticks: 120422
64us -> ticks -> us: 63
511us -> ticks: 961497
511us -> ticks -> us: 510
1280000 ticks -> us: 680
1280000 ticks -> us -> ticks: 1279488
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To reduce type conversion in HV:
Update return type of function ffs64 and ffz64 as uint16;
For ffs64, when the input is zero, INVALID_BIT_INDEX is returned;
Update temporary variable type and return value check of caller
when it call ffs64 or ffz64;
Note: In the allocate_mem, there is no return value checking for
calling ffz64, this will be updated latter.
V1-->V2:
INVALID_BIT_INDEX instead of INVALID_NUMBER
Coding style fixing;
INVALID_CPU_ID instead of INVALID_PCPU_ID or INVALID_VCPU_ID;
"%hu" is used to print vcpu id (uint16_t);
Add "U/UL" for constant value as needed.
V2-->V3:
ffs64 return INVALID_BIT_INDEX directly when
the input value is zero;
Remove excess "%hu" updates.
V3-->V4:
Clean up the comments of ffs64;
Add "U" for constant value as needed.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are multiple helpers for collecting info to be printed on the ACRN uart
console. They are unreachable code in release builds in which the uart console
is removed.
To define a precise boundary for safety-related activities, this patch wraps the
declarations and definitions to these helpers with "#ifdef HV_DEBUG" so that
these unreachable APIs will be dropped in release builds.
v1 -> v2:
* Fix coding style: no empty lines between #ifdef and the wrapped code.
* Also drop get_rte_info() in ioapic.c, which is solely used by
get_ioapic_info().
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The local variable type should be transfer to non-basic type,
chaned it to length-prefix(uint32_t,int32_t ...) type.
Char *type or char array type which used to pointer a string
will be keeped.
V1->V2 add extra comments.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C required function return type should be consistented.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
phys_cpu_num is more popular than phy_cpu_num, update them
through command.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Before we set the page table, we should know the attribute. So
move configure the page table attribute outside of modify_paging.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the hypervisor, physical cpu id is defined as "int" or "uint32_t"
type in the hypervisor. So there are some sign conversion issues
about physical cpu id (pcpu_id) reported by static analysis tool.
Sign conversion violates the rules of MISRA C:2012.
In this patch, define physical cpu id as "uint16_t" type for all
modules in the hypervisor and change related codes. The valid
range of pcpu_id is 0~65534, INVALID_PCPU_ID is defined to the
invalid pcpu_id for error detection, BROADCAST_PCPU_ID is
broadcast pcpu_id used to notify all valid pcpu.
The type of pcpu_id in the struct vcpu and vcpu_id is "int" type,
this will be fixed in another patch.
V1-->V2:
* Change the type of pcpu_id from uint32_t to uint16_t;
* Define INVALID_PCPU_ID for error detection;
* Define BROADCAST_PCPU_ID to notify all valid pcpu.
V2-->V3:
* Update comments for INVALID_PCPU_ID and BROADCAST_PCPU_ID;
* Update addtional pcpu_id;
* Convert hexadecimals to unsigned to meet the type of pcpu_id;
* Clean up for MIN_PCPU_ID and MAX_PCPU_ID, they will be
defined by configuration.
Note: fix bug in the init_lapic(), the pcpu_id shall be less than 8,
this is constraint by implement in the init_lapic().
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C explicit required expression should be boolean when
in branch statements (if,while...).
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- when init, cr0 & cr4 should read from VMCS
- when world switch, cr0/cr4 read shadow should also be save/restore
v2:
- use context->vmx_cr0/cr4 to save/restore VMX_GUEST_CR0/CR4
- use context->cr0/cr4 to save/restore VMX_CR0/CR4_READ_SHADOW
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C required that return value should be used, missing for it should
add "(void)" prefix before the function call.
Some function can be declared without return value to avoid this problem.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move common stuff, like ptdev entry and softirq, to new ptdev.c
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Current code is missing to handle the following race condition:
Before:
sti
|
V
handle softirq with
a while loop
| <----- if a new softirq generated at this point,
V it will be missed to be handled.
cli
|
V
return with unclear softirq bitmap
After:
again:
sti
|
V
handle softirq with
a while loop
|
V
cli
|
V
check if a new softirq generated, if yes,
jump back to above again lable point,
and do a while loop again.
|
V
return with clear softirq bitmap
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch drops "#include <bsp_cfg.h>" and include the generated config.h in
CFLAGS for the configuration data.
Also make sure that all configuration data have the 'CONFIG_' prefix.
v4 -> v5:
* No changes.
v3 -> v4:
* Add '-include config.h' to hypervisor/bsp/uefi/efi/Makefile.
* Update comments mentioning bsp_cfg.h.
v2 -> v3:
* Include config.h on the command line instead of in any header or source to
avoid including config.h multiple times.
* Add config.h as an additional dependency for source compilation.
v1 -> v2:
* No changes.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Change need_scheduled fileds of schedule context to flags because
it's not only used for need_schedule check.
Add two functions to request/handle cpu offline.
The reason we only handle cpu offline request in idle thread is
that we should pause the vcpu running on target pcpu. Then it's
only possible that target pcpu get cpu offline request in idle
thread.
Signed-off-by: Yin Fegnwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
To handle cpu down/up dynamically, arcn needs to support vmx off/on
dynamically. Following changes is introduced:
vmx_off will be used when down AP. It does:
- vmclear the mapped vcpu
- off vmx.
exec_vmxon_instr is updated to handle start and up AP both. It does
- if vmx was on on AP, load the vmxon_region saved. Otherwise,
allocate vmxon_region.
- if there is mapped vcpu, vmptrld mapped vcpu.
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Signed-off-by: Yin Fegnwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
soft-lock or CPUs stalls can happen during UOS running; after debugging,
find CPUs for UOS is in idle thread, and will not be scheduled back.
root cause: PIO/MMIO from UOS will trigger SOS/DM to handle them. Usually,
it should make sure UOS-vcpu pause first then resume, but for SOS/UOS in
parallel,in former code, the UOS-vcpu resume could be called first by SOS
before pause.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The current implementation of per_cpu relies on several non-c99 features,
and in additional involves arbitrary pointer arithmetic which is not MIS-
RA C friendly.
This patch introduces struct per_cpu_region which holds all the per_cpu
variables. Allocation of per_cpu data regions and access to per_cpu vari-
ables are greatly simplified, at the cost of making all per_cpu varaibl-
es accessible in files.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
In current code, sos/uos bsp can only start from 64bit mode.
For sbl platform:
This patch start sos bsp from protected mode by default.
CONFIG_START_VM0_BSP_64BIT is defined to allow start sos bsp
from 64bit mode. If a config CONFIG_START_VM0_BSP_64BIT
defined in config file, then sos bsp will start from 64bit mode.
This patch start uos bsp from real mode, which needs the integration
of virtual bootloader (vsbl).
For uefi platform:
This patch sets sos bsp vcpu mode according to the uefi context.
This patch starts uos bsp from protected mode, because vsbl is not ready
to publish for uefi platform yet. After vsbl is ready, can change to
start uos bsp from real mode.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
When we create an UOS, we didn't indicate the vmid.
Thus we can't get the vm description for the vm
description array.
Instead we use a temporary vm description to save data to
fill the vm structure when crate an UOS. It's uselesss once
UOS has created. So we don't need to maintain vm description
array here for UOS.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Don't panic system when execute vmxon instruction failed.
And let's follow that only print error info when error return
from library function.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
We cleanup ASSERT. This serial try to only panic when create
SOS failed.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
use func vcpu_queue_exception for vcpu_inject_gp and exception_vmexit_handler.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
the pending_intr is not only serving for interrupt but also for different
request including TLB & TMR updating, so change the function & variants
name accordingly.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
According to the syntax defined in C99, each struct/union field must have an
identifier. This patch removes unnamed struct/union fields that can be easily
expressed in a C99-compatible way.
Here is a summary of structs/unions removed.
struct vhm_request:
union {
uint32_t type; uint32_t type;
int32_t reserved0[16]; => int32_t reserved0[15];
};
struct vhm_request_buffer:
struct vhm_request_buffer {
union { union vhm_request_buffer {
struct vhm_request ...; => struct vhm_request ...;
int8_t reserved[4096]; int8_t reserved[4096];
} }
}
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
According to the comments in hypervisor:
" This file includes config header file "bsp_cfg.h" and other
hypervisor used header files.
It should be included in all the source files."
this patch includes all common header files in hypervisor.h
then removes other redundant inclusions
Signed-off-by: Zide Chen <zide.chen@intel.com>
- move vmexit handling into vmexit_handler
- add error handling, failure will inject #GP
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We removed '\n' in bootargs file so there is no '\n' attached
to cmdline when stitching ACRN. Then we don't need to deal with
it in ACRN.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
Changes:
1. Move io request related functions from hypercall.c to io_request.c
since they are not hypercalls;
2. Remove acrn_insert_request_nowait() as it is never used;
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add set_memmaps hypercall to support multi regions memmap.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove sipi_from_efi_boot_service_exit & efi_deferred_wakeup_pcpu workaround
for uefi boot flow
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If the target is an array, then only the first element
will be copied.
So replace structure assignment with memcpy_s().
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- rename it to 'io_shared_page' to keep consistent
with ACRN HDL foils.
- update related code that reference this data structure.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
The patch add function in vhm hypercall to retrieve physical cx data
to VHM/DM.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
currently, pass-thru devices are managed by per-vm's remapping entries
which is virtual based:
- MSI entry is identified by virt_bdf+msix_index
- INTx entry is identified by virt_pin+vpin_src
it works but it's not a good design for physical resource management, for
example a physical IOAPIC pin could belong to different vm's INTx entries,
the Device Model then must make sure there is no resource conflict from
application's level.
This patch change the design from virtual to physical based:
- MSI entry is identified by phys_bdf+msix_index
- INTx entry is identified by phys_pin
The physical resource is directly managed in hypervisor, a miss adding
entry will be found by hypervisor and return error message with failure.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Now just add some basic feature/capability detect (not all). Vapic
didn't add here for if we must support vapic then the code which
for vapic not supported must remove, like mmio apic r/w.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Split pm.c from cpu_state_tbl.c to put guest power management related
functions, keep cpu_state_tbl.c to store host cpu state table and
related functions.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
adding "hugepagesz=1G" and "hugepages=X" into SOS cmdline, for X, current
strategy is making it equal
e820_mem.total_mem_size -CONFIG_REMAIN_1G_PAGES
if CONFIG_REMAIN_1G_PAGES is not set, it will use 3 by default.
CONFIG_CMA is added to indicate using cma cmdline option for SOS kernel,
by default system will use hugetlb cmdline option if no CONFIG_CMA defined.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
SDM 24.9.1 Volume3:
- 'Exit reason' field in VMCS is 32 bits.
SDM 24.9.4 in Volume3
- 'VM-exit instruction length' field
in VMCS is 32 bits.
This patch is to redefine the data types of above fields
in 'struct vcpu_arch' and udpate the code using these
two fields.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Add cpu_has_cap API for cpu feature/capability detect instead of
add get_xxx_cap for each feature/capability detect.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This address maybe invalid if a hostile address was set
in hypercall 'HC_SET_IOREQ_BUFFER'.it should be validated
before using.
Update:
-- save HVA to guest OS's request buffer in hyperviosr
-- change type of 'req_buf' from 'uint64_t' to 'void *'
-- remove HPA to HVA translation code when using this addr.
-- use error number instead of -1 when return error cases.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Input('vm0_gpa') should be validated when handling
hypercall 'HC_VM_SET_MEMMAP to create EPT for UOS
in 'hcall_set_vm_memmap()' function.
at least 'hpa' range (from 'vm0_gpa') can't overlap
hypervisor memory region.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Before this patch, guest temporary page tables were generated by hardcode
at compile time, HV will copy this page tables to guest before guest
launch.
This patch creates temporary page tables at runtime for the range of 0~4G,
and create page tables to cover new range(511G~511G+16M) with trusty
requirement.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
