slot value should be checked in range before used to access
bi->slotinfo[].
Tracked-On: #3822
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
DIR handler is referenced after release, need to be adjusted before
released.
Tracked-On: #3821
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When removing node in list, list_foreach_safe will be safer than
LIST_FOREACH.
Tracked-On: #3778
Signed-off-by: Junhao Gao <junhao.gao@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
int snprintf(char *str, size_t size, const char *format, ...)
The functions snprintf() write at most size bytes (including the
terminating null byte('\0')) to str.
only when returned value of snprintf is non-negative and less than size,
the string has been completely written.
Tracked-On: #3789
Signed-off-by: Junhao Gao <junhao.gao@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
After Windows 10, version 1607, the cross-signed drivers are forbiden
to load when secure boot is enabled.
Details please refer to
https://docs.microsoft.com/en-us/windows-hardware/drivers/install/kernel-mode-code-signing-policy--windows-vista-and-later-
That means the kvm-guest-drivers-windows can't work when secure boot enabled.
So we found another windows virtio FE drivers from Oracle to resolve this issue
but have to change another subsystem vendor ID for the virtio BE services.
This patch introduces a new DM CMD line "--windows" to launch WaaG with Oracle virtio devices including
virtio-blk, virtio-net, virtio-input instead Redhat. It can make virtio-blk, virtio-net and virtio-input
devices work when WaaG enabling secure boot.
Tracked-On: #3583
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
This patch is used to support multiple Event Ring Segment Table (ERST).
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch only changes some names of varaibles about Event Ring Segement
Table (ERST), and doesn't modify any code logic.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The block count of the struct usb_xfer is hard coded by the macro
USB_MAX_XFER_BLOCKS (1024), it wastes memory if 1024 blocks are
allocated for low speed transfer such as control transfer or interrupt
transfer. This patch introduces a new method to allocate different
number of blocks according to different endpoint type.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The overrun and underrun event are used in the timing control machanism,
this patch is used to implement this feature.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The Block Event Interrupt (BEI) bit in the TRB descriptor could
delay the triggering of interrupt. For most OSes, the native
driver for xHCI will use this bit to optimize the IO performence,
due to reduction of number of interrupts.
But in Linux, the native xHCI driver for Intel brand controller
doesn't use this bit. It is fine for the native scenario due to
most work is completed by hardware. But in virtualization scenario,
it is almost impossible to support heavy data IO such as high
resolution video recording (ISOC transfer).
Hence, this issue is solved by a 'quirk' when the intel hardware is
emulated (when vendor id is set as 0x8086). For other cases, a
virtal hardware called 'ACRN xHCI' is emulated, and both Linux and
Windows will use BEI bit by default.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The old logic to emulate MFINDEX register is not right, this patch
is used to fix it.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Just changed the name of the variable and didn't change any emulation
code logic.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In the struct usb_block, there are some fields such as 'ccs',
'streamid', which should not be seen in the USB layer. This
patch intruduces new struct xhci_block to include the variables
for xHCI emulation.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When control transfer is detected and an unnecessary reset of
struct usb_xfer is conducted. This behavior is not necessary
and this patch is used to remove it.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Introduce helper functions to make code shorter and cleaner.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In the process of USB data transfer, there three kinds of data blocks:
a. Non data block, which contains some control information;
b. Partial data block, which contains part of a large data chunk;
c. Full data block, which contains a complete data chunk.
In previous implementation, the differences mentioned above are described
by the usb_block::chained. But the 'chained' is concept in the xHCI area
and should not appear in the USB layer. This patch introduces enum type
usb_block_type to replace the 'chained' field in struct usb_block.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Some names of functions and variables are long and not exact, this
patch is used to change them, no logic code are affected. The
changing included:
usb_data_xfer -> usb_xfer
usb_data_xfer_block -> usb_block
usb_xfer_blk_stat -> usb_block_stat
usb_data_xfer_append -> usb_block_append
USB_XFER_BLK_* -> USB_BLOCK_*
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add subclass for virtio-console pci device. Without the subclass, the
device may be probed by 8250_pci serial driver, and lead to segment
fault in acrn-dm. This issue appears when running debian as Guest OS.
But there is a potential issue, if a new serial driver, which use class
and subclass same as virtio-console, the problem may still trigger. Need
to fix it case by case.
Tracked-On: #3615
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Keep LaaG aperture size consistent with the host bios setting,
if we statically set LaaG aperture 256MB,
it may not have memory space for LaaG aperture.
We get host aperture size from cfg port 0x62.
Tracked-On: #3537
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Xinyun Liu <xinyun.liu@intel.com>
If failed to create native_adapter, free allocated native_adapter memory before return.
Tracked-On: #3543
Signed-off-by: Yifan Luo <luoyifan@cmss.chinamobile.com>
When DM receives the Disable Slot command, according to xHCI spec,
the PP bit in PORTSC register should not be cleared.
Tracked-On: #3486
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The array index of "epid" may be out of bounds if
"epid >= XHCI_MAX_ENDPOINTS", so bound check is
necessary before it is used.
Tracked-On: #3434
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
when stdio is set as a virtio-console, guest run in backend, the open
file descriptor is not referring to a terminal.
Tracked-On: #3473
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Jian Jun Chen <jian.jun.chen@intel.com>
Remove the possible NULL pointer access code for virtio-console.c
Add '\0' to end of native_patch[], to avoid the potential issue when
using %s to print the array for virtio-i2c.c
Tracked-On: #3467
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yonghua Huang <Yonghua.huang@intel.com>
Add feature that client uos can still connect to server uos after
rebooting.
Tracked-On: #3459
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The old logic identify the short packet complete status (CS) by
comparing the transfered bytes (TB) and the expected transfered
bytes (ETB), it is right only when no error happend. If error
appears, the TB may be less than the ETB, but DM should report
error CS instead of short packet CS.
Tracked-On: #3401
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add resume state for the Port Link Status (PLS) bits.
Tracked-On: #3401
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When the Stop Endpoint command is trapped, should not clear all
the data structure. Instead, only reset the ring buffer.
The reason is the xHCI may continue queue TRB without doing whole
initializing process again.
Tracked-On: #3401
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add dsdt information for i2c adapter and i2c slave devices. Currently,
only support 'cam1', 'cam2' and 'hdac' for MRB board. To add other
specific i2c device, please extend acpi_node_table[].
Usage:
virtio-i2c,<bus>[:<slave_addr>[@<node>]][:<slave_addr>[@<node>]]
[,<bus>[:<slave_addr>[@<node>]][:<slave_addr>][@<node>]]
e.g.
virtio-i2c,0:70@cam1:2F
This will add slave devices 0x70, 0x74 to virtio i2c adapter.
And for 0x70, it has '@cam1', so, will also add acpi info for
it. For 0x74, it has no '@<node>', will not add any acpi info
for it.
Note, there is slave address in acpi node info, please use '@<node>'
according to real hardware.
Tracked-On: #3357
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
Create a new thread for virtio-i2c to process i2c msg from FE. After
receive the msg, BE will dispatch it to corresponding native adapter,
after the process done, it will kick the FE.
Tracked-On: #3357
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
Add backend interface for virtio-i2c, it will parse the parameters,
maintain the info for native i2c device, remap the slave address and
dispatch the requirement from FE. When there is only one native adapter,
will not remap the slave address.
Usage for virtio-i2c:
virtio-i2c,<bus>[:<slave_addr>][:<slave_addr>]
[,<bus>[:<slave_addr>][:<slave_addr>]]
e.g.
1. virtio-i2c,4:1C
SOS:
mount /dev/i2c-4, slave addr is 0x1C.
Guest OS:
/dev/i2c-x
|- 0x1C
2. virtio-i2c,4:1C:2F,6:70
SOS:
/dev/i2c-4, slave addr 0x1C and 0x2F
/dev/i2c-6, slave addr 0x70
Guest OS:
/dev/i2c-x
|- 0x1C
|- 0x2F
|- 0x70
Tracked-On: #3357
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
Add virtio i2c adapter BE driver.
Tracked-On: #3357
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
- check input by condition check, instead of assert.
- remove redundant header file including for some files.
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
handle the error if failed to create GVT device.
- remove assert
- clean up the allocated resource
V2: refine code and clean up the allocated resource
Tracked-On: #3349
Signed-off-by: Liu Xinyun <xinyun.liu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Bug fix for parsing options, as the vritio-console support multiple
virtio serial ports, and the parameters is split by ',':
virtio-console,[@]stdio|tty|pty|file:portname[=portpath]\
[,[@]stdio|tty|pty|file:portname[=portpath]]
But the previous patch "refine console options parse code" not
cover this case, can only parse one port config. Fix it in this patch.
Tracked-On: #3337
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
Remove assert in USB mediator code.
Tracked-On: #3252
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Remove unnecessary assert and add error handling when required.
Tracked-On: #3252
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
This patch is to clean up assert from virtio-gpio
Tracked-On: #3252
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
This patch is to clean up assert from virtio-block
Tracked-On: #3252
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
