For vuart1, if it's mapped to a real native serial port, we must
re-use the native serial port io base and irq number. If no native
serial port is mapped to vuart1, non-exist io base and irq should
be used.
Please note: UOS launch script may need be updated according to
which serial port index is used by vuart1.
Now, we are using ttyS1 of SOS for vuart1 in our release. User may
need to remap vuart to different ttySx by following above rule if
ttyS1 in user platform is used by other devices like Bluetooth/Wifi.
Tracked-On: #4016
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-On: Victor Sun <victor.sun@intel.com>
Enable xhci usb mediator for whl-ipc-i5/whl-ipc-7 and KBL NUC for LaaG
and WaaG.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Enhance the $(board).config for new board.
Serial config should be set in $(board).config for new board.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
mem_size should be set from xml, it should not be overrided dynamically.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
interrupt_storm should be enabled while passthrough device was set.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add support to generate launch script for whl-ipc-i5/whl-ipc-i7.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. run_cotainer is linux type uos, remove related runC script from
unnercessary luanch script.
Tracked-On: #3930
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add board/scenario/launch config files for whl-ipc-i7.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add board/scenario/launch config files for whl-ipc-i5.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
ttys_n has already been parsed, no need to parse again. otherwise the
value will be overrided.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The 'keep_gsi' flag is needed only when UOS enabled msi driver,
so keep the flag for Android only.
Tracked-On: #3948
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
'virtio-blk' not needed for PREEMPT-RT LINUX vm.
Tracked-On: #3949
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
As vm3 for industry scenario was removed from scenario config, so
modify the uos id to proper id.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
We should use launch_$(uos type) for launch function name instead of using
launch_$(board name).
Tracked-On: #3931
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
add mem_size parameter for acrn-dm while generating launch script.
Traked-On: #3932
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Add the character of quotation marks for launch vm script.
2. Audio codec should put together with audio devcie and pass to
vm , otherwise report an error message to webUI.
Tracked-On: #3937
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The VM2 of INDUSTRY scenario need 2 vCPUs for performance, so there would
be no available pCPU for VM3, need to remove VM3 for this scenario.
Tracked-On: #3925
Signed-off-by: Victor Sun <victor.sun@intel.com>
The previous method to handle ttyS info has an assumption that PCI
serial devices are all mmio type, this caused incorrect BDF info in
board XML file.
This patch fix this issue by dropping serial device BDF info and
replace it with IO type.
Tracked-On: #3900
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Filter out the wifi/ethernet device from webUI with below PCI device class coding rule:
ethernet: 0200/0280;
wifi: 0280/0d20/0d21/0d80;
Tracked-On: #3917
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
fix the issue that there is no error message displayed in launch setting of WebUI.
Tracked-On: #3913
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Fix the wrong 'key' type of error list returned to webUI for parsing.
Tracked-On: #3913
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some BIOS does not support s3/s5, so there might be no _S3 or _S5
package in host ACPI table, previous code did not handle this, so
the build would be failed with the generated board file.
Set default s3/s5 package value to 0 for such case.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Check git environment only when '--enable_commit' option was set.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Refine the vbootloader type of vm,
The vbootloader type should be select from vsbl/ovmf/none in webUI item.
Tracked-On: #3879
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add the '--windows' option to launch WaaG vm.
Tracked-On: #3880
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
As the blkid info contains 'UUID' information, which easy to lead to
confuse with the vm 'UUID'. So refine the format for block device.
v1-v2:
1). align the style in BLOCK_DEVICE_INFO tag
2). add 'mmcblk1p3' in BLOCK_DEVICE_INFO tag
v2-v3:
1). correct the commit message.
2). refine the api of handle_block_dev
Tracked-On: #3754
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Correct the default settings of ipu/ipu_i2c device for apl-up2.
Tracked-On: #3863
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The audio and Wifi device info in apl-mrb config xmls is wrong, fix it.
Tracked-On: #3863
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The vm name for Preempt-RT Linux is not defined in launch script,
causing Preempt RT linux launch failed.
This patch refine the vm name and define the vm name for Preempt-RT
Linux to fix such kinds of issues.
Tracked-On: #3852
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Sometimes character '-' or space need to be converted to '_' to make string format uniformed.
Add this common api to satisfy such requirment and refine the code for board name generating.
Tracked-On: #3852
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some acrn-dm arguments are not needed when launch some vm, but the
item check fucntion still has strict check on the arguments, which
result in the script generating failure.
This patch add whilte list to skip the check.
Tracked-On: #3852
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Fixed the issue that parameter of 'boot_audio_option' is lost when
audio/auido codec device is configured.
Tracked-On: #3853
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
There are 2 scenarios to pass through audio/audio_codec:
1. Only pass through audio device to vm.
2. Pass through audio and audio codec device to vm.
The improvement is to generate proper boot audio option for each
scenario.
Tracked-On: #3853
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
some parameters for media_pt function are not needed any more,
remove these redundant parameters.
Tracked-On: #3853
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
'run_container' starts to run the container which contains the
clearlinux rootfs. store it in the same launch script with clearlinux.
Tracked-On: #3811
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Remove '-V' option of launch type while generating launch script.
Tracked-On: #3811
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. enable item check for acrn-dm args which set from webUI input.
2. remove 'cpu_num' tag from launch config xml.
v1-v2:
1). add method to check 'cpu_num'/'mem_size' in config xml.
v2-v3:
1). as 'vcpu_num' configured in scenario, the parameter for acrn-dm is no
longer needed, remove 'cpu_num' tag and its handler from launch config.
2). add 'poweroff_channel' tag for generic config.
Tracked-On: #3811
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Change i915.domain_plane_owners and i915.avail_planes_per_pipe for
hybrid scenario;because kvm based User vm will use PipeA.
Tracked-On: #3840
Signed-off-by: Victor Sun <victor.sun@intel.com>
add a confirmation interface to let user to commit changes into local tree
or not commit after generated source codes in config app.
Tracked-On: #3834
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Config tool will generate files for board/scenaro/launch, some files are
part of souce code for specify board. Git add/commit these files should
be one optional of user experience. Add "--enable_commit" parameter to
enable git add/commit.
usage:
--enable_commit: flag of whether to do git commit the config file changes
to current git branch. Do commit with this flag and not do without the flag.
Tracked-On: #3834
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
fix the issue: some select boxes disappear unexpectly after edited
Tracked-On: #3809
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
According to the new vcpu affinity configuration method, update vcpu
configuration in Web UI from multi-select box to seperated select box
which can dynamically add or delete vcpus with mapped pcpus.
Tracked-On: #3798
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
The pcpu sharing for vm already enabled in master branch, acrn-config
tool for generating scenario config souce file should keep align with master branch.
1. Add 'vcpu_affinity' tag and its vaule in config xml.
2. Parse the 'vcpu_affinity' tag of value from config xml for generating vcpu_affinity.
v1-v2:
1). apl-up2-n3350 has two PCPUs, set appropriate value for vcpu_affinity.
Tracked-On: #3798
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Unify the data type for scenario item.
1. Unified the scenario item, the type modified from list to dictionary.
2. remove some unused function.
3. add 'pci_dev_num'/'pci_devs' to hybrid xml for future support.
Tracked-On: #3798
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The value of CONFIG_MAX_PCPU_NUM is stands for Processor CPU number and
it is grabed from board information.
Tracked-On: #3798
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Current python code could handle pci sub class name contain "-" as
expected, but some space characters may still exist. This patch support
to parse similar strings which contain "-" and ' ' for pci sub class name.
Also, add the index number as suffix for the similar strings
Tracked-On: #3788
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
fix the issue: WebUI could not generate configuration patch for a new imported board
Tracked-On: #3760
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
