1.Refinement GVT args for SOS kernel cmdline in scenario config xmls.
2.Refinement GVT args for launch UOS script in launch config xmls.
Tracked-On: #4869
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1.Update efi bootloader image file path for Yocto rootfs.
2.Remove empty check for UEFI OS loader name.
Tracked-On: #4868
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1.Add RDT feature in scenario xmls, add set RDT_ENABLED=y, CDP_ENABLED=n
by default for industry scenario if HW support RDT.
2.Add CLOS_MASK in xmls to configurable and set them to '0xff' by
default if HW support RDT.
3.Remove configurable="0" of clos for PRE launched VM and POST VM, currently,
remain configurable="0" for SOS VM.
4.Add vcpu_clos to match the pcpu_id number, and set vcpu_clos to 0.
Tracked-On: #4860
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Remove pre-launched VM console setting in scenario xml and leave it
configured in bootargs directly.
Tracked-On: #4808
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The bootarg of rootfs for pre-launched VM is for Linux only and it
should not limited to physical block device which is selectable from
native rootfs list, it might be a USB or RAM device that "X" is variable
in root=/dev/sdX or /dev/ramX. So remove the rootfs setting in XML and
leave it configured in kernel bootargs directly.
Given the SOS must be Linux and its rootfs must be a physical block
device, rootfs item tag is still reserved in xml for SOS VM section.
Tracked-On: #4808
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
remove configurable="0" for hybrid scenario pci_devs of Pre Launched VM.
Tracked-On: #4808
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Remove "idle=halt" from SOS boot args since the param could be handled
automatically by acrn-config according to CPU scheduler setting.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
If HV relocation is enabled, either ACRN efi-stub or GRUB relocates
hypervisor image above HPA 256MB, thus we put hvlog and ramoops buffer
under 256MB to avoid conflict with hypervisor owned address.
This patch hardcodes these addresses:
0xa00000 - 0xdfffff: 4MiB for ramoops buffer
0xe00000 - 0xffffff: 2MiB for hvlog buffer
However, user can customize them to other addresses as long as it's under
256MB, available in host e820, and SOS bootarg "nokaslr" is not specified.
If HV relocation is disabled, need to make sure that these buffer
addresses are not between HV_RAM_START and HV_RAM_START + HV_RAM_SIZE.
Tracked-On: #4760
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
enable gvtd for waag of nuc7/nuc6 board by default.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
For nuc7/nuc6/whl-ipci5/whl-ipc-i7 board, add 4 POST_STD_VM and 1
KATA_VM in their industry config xmls, and assign PCPU0-1 to these
PRE_LAUNCHED_VM.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Parse KATA VM count number from scenario config with vm_type 'KATA_VM'
and Remove MAX_KATA_VM_NUM from scenario config xmls.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
remove configurable="0" for pci_devs of pre-launched VM so that the
passthru devices could be configurable on webUI.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
1.Remove cpu_sharing item from launch config xml.
2.Add cpu_affinity for launch config xmls to configurable POST VM cpu
affinity from webUI.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Change the tag name from "vcpu_affinity" to 'cpu_affinity" in all the per
board scenario xml files, and change the descritpions.
Tracked-On: #4641
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Remove sdc2 scenario since the VM launch requirement under this scenario
will be satisfied by industry scenario.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Leave HV_RAM_SIZE/HV_RAM_START default to blank, and config tool would
generate for them, otherwise, they would be set by the UI.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Set default value for HV template.
2. Refine vuartx in template vm setting xmls.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. modify epc_section to configurable="0".
2. add 'idle=halt' for sos bootargs to impove performance.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Use vm_type to instead combination of load_type/uuid/severity in config
xmls.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Add pass-thru PCI device for pre launched vm section in config xmls.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Update the board defconfig to scenario config xmls, and user can configure
it from webUI.
Tracked-On: #4634
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Correct mismatch PCI audio device for passthrough in nuc6cayh.
Tracked-On: #4530
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Since there is no RTVM requirement for sdc2 scenario, replace uuid
495ae2e5-2603-4d64-af76-d4bc5a8ec0e5 which is dedicated to RTVM with
615db82a-e189-4b4f-8dbb-d321343e4ab3
Tracked-On: #4472
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Launch script should be set to 'Disabled'/'Enabled' from webUI while
hv enabled/disabled the cpu sharing.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
- commit 69152647 ("hv: Use virtual APIC IDs for Pre-launched VMs")
enables virtual APIC IDs for pre-launched VMs thus xapic_phys is no
longer needed to force guest xAPIC to work in physical destination mode.
- HVC is not available in logical partition mode and "console=hvc0" should
be removed from guest Linux bootargs.
Tracked-On: #3854
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Modify the hpa start size value for logical_partition scenario to avoid
build issue, and make the memory size of pre-launched VM configurable.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
To keep align hypervisor source code for scenario config, need add
the 'severity' item tag into scenario config files.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Currently kata vm is supported in SDC scenario by default, both vm1
and kata vm would share pcpu id 3 for vcpu affinity even when cpu
sharing is not enabled.
Remove pcpu id 3 from vm1 in SDC scenario config xmls.
Tracked-On: #4286
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Some VMs don't need pci-gvt args or or need specific configuration
for 'gvt_args' item tag, this patch changes from selectable behavior to
editable for 'gvt_args' item from webUI.
2. Modify the description for gvt_args item tag from launch config xmls.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
For currently supported hardware such as KNL NUC, the scenario xml
file is not generated and the newly added non-contiguous variables
will not be present. This can lead to build issues. This patch adds
the second non-contiguous HPA variable to all supported hardware
for both logical_partition and hybrid modes. It also adds checks
to ensure that HPA2 is valid before using it while creating the
guest VM ve820.
Tracked-On: #4242
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some vm need power off method, so modify 'poweroff_channel'
item in the launch config files that user could select them from webUI.
Tracked-On: #4212
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Some vm need mediator of 'virtio-console', so add 'console' item
into 'virtio_devices' leaf that user could edit them from webUI.
2. Add 'vuart0' item to enable/disable serial console emulation by
device model.
Tracked-On: #4186
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch adds ramdisk_mod tag to all supported boards and
logical partition, hybrid, industry and sdc xmls
Tracked-On: #4197
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
modify the description of usb xhci about the input format.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some vm need mediator of 'virtio-net', so add 'virtio-network'
item into the launch config files that user could edit them from webUI.
Tracked-On: #4185
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
remov rootfs_dev and rootfs_img item and replace them with vritio-blk
item.
The format for virtio-blk:
[blk partition:][img path] e.g.: /dev/sda3:./a/b.img
For vbootloader of ovmf: [img path] e.g.:./a/b.img
Tracked-On: #4172
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
In current implementation, we only support OVMF as vbootloader, so
set vbootloader attributes to readonly in related XMLs to avoid issues.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some vm need USB xHCI mediator support, this patch add 'usb_xhci' item
to the launch config files that user can edit it from webUI.
Tracked-On: #4164
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some vm need mediator of 'virtio-input', so add 'virtio-input' item
into the launch config files that user could edit them from webUI.
Tracked-On: #4163
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Support to config kata vm in webUI, this need to modify 'configurable' attribute
to '1' in vm item.
Tracked-On: 4145
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
As vm3 for industry scenario was removed from scenario config, so
modify the uos id to proper id.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The VM2 of INDUSTRY scenario need 2 vCPUs for performance, so there would
be no available pCPU for VM3, need to remove VM3 for this scenario.
Tracked-On: #3925
Signed-off-by: Victor Sun <victor.sun@intel.com>
1. enable item check for acrn-dm args which set from webUI input.
2. remove 'cpu_num' tag from launch config xml.
v1-v2:
1). add method to check 'cpu_num'/'mem_size' in config xml.
v2-v3:
1). as 'vcpu_num' configured in scenario, the parameter for acrn-dm is no
longer needed, remove 'cpu_num' tag and its handler from launch config.
2). add 'poweroff_channel' tag for generic config.
Tracked-On: #3811
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Change i915.domain_plane_owners and i915.avail_planes_per_pipe for
hybrid scenario;because kvm based User vm will use PipeA.
Tracked-On: #3840
Signed-off-by: Victor Sun <victor.sun@intel.com>
The pcpu sharing for vm already enabled in master branch, acrn-config
tool for generating scenario config souce file should keep align with master branch.
1. Add 'vcpu_affinity' tag and its vaule in config xml.
2. Parse the 'vcpu_affinity' tag of value from config xml for generating vcpu_affinity.
v1-v2:
1). apl-up2-n3350 has two PCPUs, set appropriate value for vcpu_affinity.
Tracked-On: #3798
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Unify the data type for scenario item.
1. Unified the scenario item, the type modified from list to dictionary.
2. remove some unused function.
3. add 'pci_dev_num'/'pci_devs' to hybrid xml for future support.
Tracked-On: #3798
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
