GPA of software SRAM is available only after
build_vrtct() function is called and the return
value of it is valid(Not NULL).
This patch fix bug in create_and_inject_vrtct()
function which violates above pre-condition when
calling get_software_sram_base_gpa().
Tracked-On: #5973
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Windows graphic driver obtains DSM address from in-BAR mmio register
which has passthroughed. Not like the other platforms obtained from
pci configure space register which has virtualized. GPU GuC must use
WOPCM in DSM, besides, Windows OS wants to manage DSM also. These two
reason force acrn has to keep identical mapping to avoid trap mmio
BAR to do the emulation.
Tracked-On: #5880
Signed-off-by: Peng Sun <peng.p.sun@intel.com>
PCI spec said that BAR base should be naturally aligned. But on
ACRN if the bar size < PAGE_SIZE, BAR base should be aligned with
PAGE_SIZE. This is because the minimal size that EPT can map/unmap
is PAGE_SIZE.
Tracked-On: #5717
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
For clarity, we now prefer y|n over 0|1 as the values of boolean options on
make command lines. This patch applies this preference to the Makefile of
the device model and tools, while RELEASE=0|1 is still supported for
backward compatibility.
Tracked-On: #5772
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
- Exit main() if pm_by_vuart_init() fails
- Use SIGHUP to gracefully power off a VM if pm_monitor_loop()
encounters a failure
- Identify a closed socket as a failure in pm_monitor_loop()
Tracked-On: #5736
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Per ACPI 6.x chapter 6.1, "A device object must contain either an _HID object
or an _ADR object, but should not contain both."
Remove this object otherwise iasl would complain
"Warning 3073 - Multiple types ^ (Device object requires either a _HID
or _ADR, but not both)"
when launch post-launched VM in devicemodel.
Tracked-On: #5719
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Per ACPI 6.x chapter 19.6.109, the Processor Operator is deprecated.
Replace it with Device Operator, otherwise the iasl would complain
"Warning 3168 -
Legacy Processor() keyword detected. Use Device() keyword instead."
when launch post-launched VM in devicemodel.
Tracked-On: #5719
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The device descriptor describes general information about a device,
the bcdUSB field contains a BCD version number. The version 3.2 is
represented with value of 0x320H. Add the missed BCD version in the
bcdUSB case statement. And modify the return value of address device
command in case create device failed.
Tracked-On: #5712
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
resize vm_config buffer from 16KB to 32KB, as 16KB
is not enough on EHL platform, which will result in
crash when accessing this memory.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Fix compilation issue when using gcc 10.x due to the "__packed"
attribute in acpi.h. Explicitly changing that to __attribute__((packed))
fixes the compilation error.
Tracked-On: #5671
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
GPA base of SW SRAM can't be hardcoded as physical address
of SW SRAM(HPA), as this HPA may vary on different platform.
This patch reserves a dedicated memory slot[GPA: 2G - 8M, 2G)
as SW SRAM region.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch prepares vRTCT for post-RTVM instead of
pass-thru native RTCT:
- Configurations are based on Service VM native RTCT.
- Remap vLAPIC IDs in vRTCT.
- Remap base address of SW SRAM memory regions
from HPA to GPA.
- HPA base of Software SRAM shall be parsed from PTCT
instead of hardcoding.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch add function 'vm_get_config()' to get
configuration information for current VM from hypervisor.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Remove vm_configs folder and move all the XML files and generic code example into config_tools/data
Tracked-On: #5644
Signed-off-by: Xie, nanlin <nanlin.xie@intel.com>
Currently, OVMF sets CR4.MCE bit without
any hardware support checking, this will cause
User VM boot fails as MCE feature is not available
for ACRN guest VM.
This patch walk around this issue in OVMF.
Tracked-On: #5586
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
paddr_guest2host may return NULL, this patch checks the return value
to avoid null pointer dereference.
Tracked-On: #5514
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Prevent memory and information leaks by checking boundaries of
the incoming buffers from the hypervisor.
1. We check that the buffer is sufficent to hold a valid header.
2. We that each hbm message has valid size
vmei_hbm_handler() now returns -EINVAL if the size too small.
3. hdr->length < data_length.
Tracked-On: #5451
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Update and light clean-up of the buit-in list of arguments from 'acrn-dm'
* Added options in the top part (list with no explanation)
* Remove a couple of arguments that are no longer valid ('vmcfg' and 'dump')
Tracked-On: #5445
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
In addition to a single OVMF image (OVMF.fd), split images
(OVMF_CODE.fd, OVMF_VARS.fd) can be used to facilitate VM management.
From the OVMF Whitepaper:
The variable store and the firmware executable are also available in
the build output as separate files entitled: "OVMF_VARS.fd" and
"OVMF_CODE.fd". This enables central management and updates of the
firmware executable, while each virtual machine can retain its own
variable store.
An example to launch acrn-dm with the split images:
--ovmf code=/usr/share/acrn/bios/OVMF_CODE.fd, \
vars=/usr/share/acrn/bios/OVMF_VARS.fd
v1 -> v2:
- use memory-mapped file I/O for writeback
- use fcntl to lock OVMF image files
Tracked-On: #5487
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
paddr_guest2host can return NULL, but code paths in virtio
are not checking the return value.
_vq_record() initializes iov_base pointer using paddr_guest2host()
but there is nothing in the flow that checks for NULL.
Chane _vq_record to return -1 in case the address translation
has failed.
Tracked-On: #5452
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Windows graphic driver obtains DSM address from in-BAR mmio register
which has passthroughed. Not like the other platforms obtained from
pci configure space register which has virtualized. So TGL has to
keep identical mapping to avoid trap mmio BAR to do the emulation.
To keep simple, this patch hardcode the TGL DSM region in vE820
table, this will cause memory waste here. In the near future, we
need refine the entire vE820 logic as it is hard to maintained
due to many reserved regions have introduced in recently.
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Tracked-On: #5461
When libusb_control_transfer function return a negative number, because
the function clear_uas_desc's argument is unsigned int this will cause
unsigned integer conversion.
Tracked-On: #5463
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
dm: pSRAM: added a command line parameter "--psram" to enable pSRAM
support for post-launched RTVM
Added "--psram" in DM command line to enable pSRAM support for
post-launched RTVM
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
dm: modify vE820 to adapt to pSRAM for post-launched RTVM
When pSRAM is enabled for post-launched RTVM, we add a segment in vE820 for
pSRAM, and therefore the lowmem RAM will be split into part1 and part2.
Also, code of post vE820 initialization is refined
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
dm: vptct: add vPTCT for post-launched RTVM
We added vPTCT support for post-launched RTVM:
1. Added a function create_and_inject_vptct. Currently, we
pass-through the whole pSRAM to one RTVM, so we will also pass-
through the PTCT to the very same RTVM. This function will
read the native PTCT from SOS and inject it into post-
launched VM's vACPI.
2. Added some definitions for vPTCT.
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
If acrn-dm create pci vuart with
'-s,<slot>,uart,vuart_idx:<value>', then acrn-dm will not
create pci uart at DM land, but create an vuart-pci virtual device
at HV land.
When create a HV land vuart-pci vdev, user must specify its vuart id.
Which is defined in vm_config, is the acrn_vm_pci_dev_config.vuart_idx
Tracked-On: #5394
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
- Explicitly reserve memory regions based on the input E820 map
- Revert "ovmf: reserve e820 table for PTCM"
Tracked-On: #5442
Signed-off-by: Peter Fang <peter.fang@intel.com>
We don't reserve PCI MMIO in e820 Table, it's included in DSDT ACPI Table.
About 0xA0000 - 0x100000 entry, we don't have any ACPI Table touch this region.
So we could remove it too.
After this change, we could only pass the reserved e820 table which we must
reserve to OVMF. In this case, the OVMF could trust ACRN-DM and pass the
reserved e820 table to guest instead of dropping it.
This patch needs the corresponding modify in OVMF. Otherwise, the guest could
not boot.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
pm_vuart stops listening and relays the message right away if it
encounters EAGAIN during read(). This causes the messages relayed to be
fragmented.
Only relay the message when it encounters a null character or a newline
character, or when the buffer is full.
Tracked-On: #5429
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Fix typo error "--apicdev_pt HID" to pass through a TPM device. Fix it to
"--acpidev_pt HID"
Tracked-On: #5401
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Add Null pointer check in init vq ring and add vq ring descriptor
check in case cause Nullpointer exception.
Tracked-On: #5355
Signed-off-by: Liu Long <long.liu@intel.com>
Add Null pointer check in init vq ring and add vq ring descriptor
check in case cause Nullpointer exception.
Tracked-On: #5355
Signed-off-by: Liu Long <long.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Change shared memory name prefix from sos to dm
Change shared memory size unit from byte to megabyte
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
