ACRN uses global invalidation for all DMAR translation caches. Whenever
a UOS is shutdown or rebooted, it ends up clearing entries in translation
caches belonging to other VMs/domains. This patch adds support for
domain/device level invalidation for DMA translation caches and index
based invalidation for Interrupt Remapping Cache.
Tracked-On: #2738
Signed-off-by: Sainath Grandhi sainath.grandhi@intel.com
Acked-by: Eddie Dong eddie.dong@intel.com
Preparing for hybrid mode:
- create vE820 for pre-launched VMs and do other init code when the
vm_config->type is PRE_LAUNCHED_VM.
- create ve820.c for each board because without wrapping by
CONFIG_PARTITION_MODE, ve820_entry[] needs to be visible even when
compiling target boards that haven't enabled pre-launched VMs.
- remove create_prelaunched_vm_e820() from vm.c and implement board
specific function for each $(CONFIG_BOARD)/ve820.c. The reasons being:
- don't need to define ve820_entry[32] for those boards that don't
support pre-launched VMs.
- more importantly, this makes it much easier to create different per-VM
vE820 when it's needed.
Tracked-On: #2291
Signed-off-by: Zide Chen <zide.chen@intel.com>
Previously vrtc is for partition mode only, now enable it for sharing mode;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove vdev ops for sharing mode, directly call the corresponding functions
instead of calling the ops callbacks (indirectly)
Remove alloc_pci_vdev() and merge its code into init_vdev_for_pdev() to simplify code
Remove @pre for local variables
Change the return value from int32_t to void to comply with misra c and
add ASSERT in the functions (if necessary) to verify the assumptions for debug build:
vmsi_init
vmsix_init
vmsi_deinit
vmsix_deinit
Add @pre for vmsix_init_helper and make it a void function, use ASSERT to verify
the assumption for debug build.
Add ASSERT in get_sos_vm
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This is to fix the following misra c violation:
Pointer param should be declared pointer to const. : vdev
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
No need to use these 2 variables as global (per pci_misx), can simply use local
variables in code instead.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now we only configure "hide MTRR" explicitly to false for SOS. For other VMs,
we don't configure it which means hide_mtrr is false by default.
And remove global config MTRR_ENABLED
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
VM use CLOS when set CLOS_REQUIRED in guest flags of vm_config. The
wrong comment is 'if guest_flags has CAT_ENABLED', and should be fixed
as 'if guest_flags has CLOS_REQUIRED'
Tracked-On: #2462
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
1. move seed_info structure from trusty.h to seed.h
2. replace "#include <hypervisor.h>" with necessary including headers
in seed.c/seed_abl.c/seed_sbl.c
Tracked-On: #2777
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove vmx_cr0/vmx_cr4 from ext_context structure, they are duplicated
with cr0/cr4 fields in run_context.
Switch cr0/cr4 of run_context structure on demand when do world switch.
Remove vmx_cr0_read_shadow/vmx_cr4_read_shadow from ext_context structure.
These fields should be same for both normal world and secure world.
Tracked-On: #2773
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove the populate_msi_struct() function, put msi initialization specific
functionality into msi.x, and put msix initialization specific functionality
into msix.c
Rename mmio_hva to mmio_hpa and change related code to fix misra c violation:
Cast from pointer to integral type. : (void* to unsigned long): ( uint64_t ) hpa2hva ( bar -> base )
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In order to remove the usage of hypervisor.h,
modularize the boot folder.
Current changes include modifications to remove
usage of acrn_vm structure pointer, from some of
the call, and remove calls to hypervisor.h,
as and when deemed fit.
Removed hva2gpa, as this was not used anywhere else
after the changes.
Tracked-On: #2694
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move instr_emul_ctxt instance from struct per_cpu_region
to struct vcpu, and rename it from g_inst_ctxt to inst_ctxt
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
now the 'cpu_mode' is unused in struct vm_guest_paging,
and there is the same variable in struct acrn_vcpu_arch
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch mainly unifies init_vm_boot_info's implementation between SBL and
UEFI.
Tracked-On: #2708
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch unifies the bsp interface between UEFI and SBL.
Tracked-On: #2708
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add two functions to combine constraint for APICv:
is_apicv_basic_feature_supported: check the physical platform whether support
"Use TPR shadow", "Virtualize APIC accesses" and "Virtualize x2APIC mode"
is_apicv_advanced_feature_supported: check the physical platform whether support
"APIC-register virtualization", "Virtual-interrupt delivery" and
"Process posted interrupts".
If the physical platform only support APICv basic feature, enable "Use TPR shadow"
and "Virtualize APIC accesses" for xAPIC mode; enable "Use TPR shadow" and
"Virtualize x2APIC mode" for x2APIC. Otherwise, if the physical platform support
APICv advanced feature, enable APICv feature for xAPIC mode and x2APIC mode.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Except for few translation structures in x86 IOMMU, all translation
structures are 128-bit. All the translation structures used by ACRN
are 128 bit. So removed multiple definitions and defined a struct
that accomodates 128 bit entries.
Tracked-On: #2668
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
platform_acpi_info.h should be BOARD specific so move the header file
to configs/$(CONFIG_BOARD)/ folder.
So the target acpi info file detect process is:
Compiler search for $(CONFIG_BOARD)_acpi_info.h under
hypervisor/arch/x86/$(CONFIG_BOARD)/ first (the file is supposed to be
generated by offline tool so it is not included in original source), if
found, then the file is the target acpi info file. If not and at the
same time the ENFORCE_VALIDATED_ACPI_INFO Kconfig was set, the compiler
will stop and hint user to add target acpi info file by offline tool.
If ENFORCE_VALIDATED_ACPI_INFO was unset, then compiler will continue to
search for platform_acpi_info.h as target acpi info file under
hypervisor/arch/x86/$(CONFIG_BOARD) folder (with this file we could bypass
ENFORCE_VALIDATED_ACPI_INFO check and benifit for development). If this
file is not exist, then hypervisor/arch/x86/configs/platform_acpi_info.h
will be included as final target acpi info.
The process should work for UEFI path also, with a valid platform acpi
info file, S3/S5 should work on UEFI platform.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- change 'tsc_khz' to static
-- move these APIs from rtl.h to timer.c
us_to_ticks()
ticks_to_us()
ticks_to_ms()
rdtsc()
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch simplifies `get_primary_vcpu` and `vcpu_from_vid`.
The target_vcpu could be get from the index directly.
Tracked-On: #1842
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Correct wrong use of vector where lvt_index should be used.
Tracked-On: #1842
Signed-off-by: Min He <min.he@intel.com>
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
ECS.bit31 is not used and always return 0 in SDM Vol.2A 3-195. It's a
standard way to indicate whether there is a hypervisor.
Tracked-On: #2490
Ref: https://lwn.net/Articles/301888/
Signed-off-by: Xinyun Liu <xinyun.liu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
pci_vdevs is vpci stuff so it would be better to make it managed by vpci rather than by vm.h,
both sharing mode and partition mode can use pci_vdevs[] to maintain its own
per vm vdev list.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- merge sharing_config.c and partition_config.c to vm_config.c;
- make vm_configs[] static;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- Do not refer vm_configs[] directly in vm module;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- move sanitize_vm_config() from vm.c to vm_config.c;
- move get_vm_config() from vm.h to vm_config.h;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Enlarge hypervisor BSS section to support EPT mapping of additional
1G address space. This is used to support 64bit PCI bar whose address
is strictly above 4G.
Tracked-On: #2577
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When CAT is supported, UOS can setup acrn_vm_config.clos, to use CAT
feature. Eg.,
struct acrn_vm_config vm_configs[CONFIG_MAX_VM_NUM] = {
{
.guest_flags |= CLOS_REQUIRED,
.clos = 1,
},
};
sanitize_vm_config() will check if CAT is supported and
vm_configs.clos is valid.
Tracked-On: #2462
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Enumarate capability of Cache Allocation Technology(CAT) on X86 platform,
when HV init the primary cpu. If CAT is supported, store its info
to global struct cat_hw_info.
Tracked-On: #2462
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IF CAT is supported, and we want setup initial values to
IA32_Type_MASK_n MSRs, We can define a global structure
platform_clos_array[PLATFORM_CLOS_NUM], it has 2 members:
1.msr_index, the MSR address of IA32_Type_MASK_n
2.clos_masky, the initial valuses
Global varible platform_clos_num is the number of IA32_Type_MASK_n,
from IA32_Type_MASK_0 to IA32_Type_MASK_<CLOS_MAX_NUM - 1>
Tracked-On: #2462
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1) The previous implementaion will recalculate the whole EOI-exit bitmap for
each RTE once the destination, trigger mode, delivery mode or vector of a RTE
has changed and update the EOI-exit bitmap for each vcpu of the VM.
In this patch, only set the corresponding bit of EOI-exit bitmap for
a vcpu when a level triggered interrupt has accepted in IRR or clear the
corresponding bit of EOI-exit bitmap for a vcpu when a dege triggered interrupt
has accepted in IRR which means only update a bit of EOI-exit bitmap in a vcpu
when updating TMR.
2) Rename set eoi_exit related API to set eoi_exit_bitmap.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
--move several uart API declarations from console.h to uart16550.h
--move several shell API declarations from console.h to shell.h
--add dbg_cmd.h, move 'handle_dbg_cmd' declaration from console.h
to dbg_cmd.h
--move debug/uart16550.h to include/debug/uart16550.h since some
uart APIs will be called by external files
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
modified: arch/x86/guest/vm.c
modified: arch/x86/init.c
modified: bsp/uefi/cmdline.c
modified: debug/console.c
modified: debug/dbg_cmd.c
modified: debug/uart16550.c
modified: debug/vuart.c
modified: hw/pci.c
modified: include/arch/x86/multiboot.h
modified: include/debug/console.h
new file: include/debug/dbg_cmd.h
new file: include/debug/shell.h
renamed: debug/uart16550.h -> include/debug/uart16550.h
remove vpci_vdev_array in vm_config struct as it is not used any more;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are still some misra-c violations when CONFIG_PARTITION_MODE is defined.
arch/x86/configs:
- remove the unused macro: PRE_LAUNCH_VM_NUM
- pt_dev.c: VMx_CONFIG_PCI_PTDEV_NUM has been defined in partition_config.h,
should not hard code them again in pt_dev.c.
- ve820.c: use "UL" suffix instead of "U" for 64 bits variables.
vmid is uint16_t in ACRN, so vuart_vmid should be uint16_t as well.
Fix another few other miscellaneous misra-c violations.
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename vlapic_post_intr to apicv_post_intr and move it to internal function
since it's only used in vlaic.c.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since it's only used in vlaic.c
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move vm_active_cpus from vlapic.c to vm.h since it's vm related
not vlapic related.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
pci_vdev contains a pointer to pdev, which stores pbdf, so there is no need
to store a separate pbdf in vdev.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use a function to compare bdf instead and some related code cleanup
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
merge E820_MAX_ENTRIES and NUM_E820_ENTRIES
to E820_MAX_ENTRIES.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
There are two bugs related to PDPT address calculation for PAE mode.
1. Current code doesn't ignore the "Ignored" fileds when load pdpt registers.
Mask the "Ignored" fileds according to SDM Figure 4-7 Vol3.
2. Current code only ignores 4bits instead of 5bits in low "Ignored" filed when
calculate PDPT address in PAE mode for guest memory address translation.
Tracked-On: #2561
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove hypervisor.h from per_cpu.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
merge include/arch/x86/irq.h and include/common/irq.h
--> include/arch/x86/irq.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
move gva2hva() & hva2gpa() to guest_memory.c,
we will remove hypervisor.h in the future.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
According to SDM 17.3.1.1, for any fault-class exception except a
debug exception generated in response to an instruction breakpoint,
the value pushed for RF is 1.
This patch set Resume Flag for fault class exceptions.
Tracked-On: #2405
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Removed the remaining reference of acrn vm from
inside of vtd.c.
Removed usage of snoopy_mem, and added code to achieve
the same using iommu_snoop.
Initialize iommu_snoop to true in create deault iommu.
Tracked-On: #2496
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
This patch is a modified one. It removes the usage
of acrn_vm struct from inside vtd.c.
It also puts struct iommu_domain inside vtd.h,
from vtd.c.
It modifies the signature of init_iommu_domain
in order to remove dependency on acrn_vm from
inside vtd.c.
Incorporated comments from Jason and Eddie.
Changed the name of sos_vm_domain to
fallback_iommu_domain
Removed any reference of sos_vm from vtd.[c|h]
files, including comments.
Tracked-On: #2496
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
For vcpu.c and vcpu.h,only include some necessary
header files, doesn't include hypervisor.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- now hypervisor.h is the universal set of header file,
this patch doesn't include hypervisor.h, only include
some necessary header files for vm.c and vm.h
-- move 'struct vcpuid_entry' from vm.h to vcpuid.h
-- remove dead code 'enum vm_privilege_level'
-- move 'enum vpic_wire_mode' from vm.h to vpic.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- move functions related vmexit from `guest.h` to `vmexit.h`
- move functions related msr from `guest.h` to `msr.h`
- move functions related vm_sw_loader from `guest.h` to `vm.h`
- move function `vmx_vmrun` from `guest.h` to `vcpu.h`
- move MACROs related to vcpu from `guest.h` to `vcpu.h`
- move MACRO `E820_MAX_ENTRIES` from `guest.h` to `e820.h`
- move MACROs related to irq from `guest.h` to `irq.h`
- rename `guest.h` to `guest_memory.h`
Tracked-On: #2503
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use acrn_vm_pci_ptdev_config struct for PCI PT devices configuration
in acrn_vm_config, the only needed configure item is PT devices's
vBDF and pBDF info. When init PT devices, the BDF info will be stored
in pci_vdevs[] of acrn_vm.
With this patch, the previous vpci_vdev_array struct is not needed.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove redundancy code since they are not used now.
-- remove 'max_ram_blk_base' & 'max_ram_blk_size' in
struct e820_mem_params
-- remove 'gpa_lowtop' in struct vm_hw_info
-- remove MACRO 'UOS_DEFAULT_START_ADDR'
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The partition mode vm config in vm_description.c is abandoned,
so delete the file. Its related struct in vm.h is also removed;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The previous VM configs array for partition mode is inside struct of
vm_config_partition and named as vm_config_array[], now switch to
global vm_configs[];
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As we store the physical pci device info in a global pdev array, the vdev struct can
store a pointer to pdev instead.
Tracked-On: #2431
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Current pt devices bar info for partion mode is hardcoded in
vm_description.c, now we remove the hardcoded info and parse the bar
info during pt devices init.
Tracked-On: #2431
Signed-off-by: Victor Sun <victor.sun@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Tracked-On: #2431
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
- add e820 info in struct acrn_vm;
- rename rebuild_sos_vm_e820() to create_sos_vm_e820();
- add create_prelaunched_vm_e820() for partition mode;
- rename create_e820_table() to create_zeropage_e820() and merge for
both sharing mode and partition mode;
- move create_xxx_vm_e820() to vm.c;
- move create_zeropage_e820() to vm_load.c;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move e820_default_entries[] from vm_description.c to ve820.c and rename
to ve820_entry[] as a temparary solution for partiton mode e820 management;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename vlapic_deliver_intr to vlapic_receive_intr: ioapic/msi device
deliver an interrupt to lapic.
Rename vlapic_pending_intr to vlapic_find_deliverable_intr: find a
deliverable interrupt which pending in irr and its priority large than ppr.
Rename vlapic_intr_accepted to vlapic_get_deliverable_intr: get the deliverable
interrupt from irr and set it in isr (which also raise ppr update)
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
CRx 'guest/host mask' is widely used when talking
about CR0/CR4 virtualization in SDM spec,
rename them to 'VMX_CRx_GUEST_HOST_MASK'.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- move `vcpumask2pcpumask` from `guest.c` to `vcpu.c`
- move `prepare_sos_vm_memmap` from `guest.c` to `vm.c`
- rename `guest.c` to `guest_memory.c`
Tracked-On: #2484
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When a corresponding IOMMU is found for the device, this patch adds
support to program Interrupt Remapping hardware RTEs and the original
interrupt sources (MSI or IOAPIC) with IR format.
Tracked-On: #2426
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
IOAPIC info from DMAR table is needed to match the IOAPIC info from
MADT. This patch adds support to get id and bus, devfn for IOAPIC
from DMAR. IOAPIC info for SBL platform is hardcoded in the header
file.
Tracked-On: #2426
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
IOAPIC info, specifically ID, is needed to map the IOAPIC to
corresponding DMAR. DMAR table in ACPI has a field that has IOAPIC
ID, that matches the info provided in MADT. Both (IOAPIC info from
MADT and from DMAR) is needed for remapping IOAPIC interrupts.
Tracked-On: #2426
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
As we enable Interrupt Remapping Hardware in ACRN, Queued Invalidation
(QI) needs to be used clear DMAR hardware caches. This patch introduces
Queued Invalidation APIs. Code related to Register based Invalidation
is removed from ACRN and platforms that do not support QI cannot boot
with ACRN after this patch.
Tracked-On: #2426
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
The msr load/restore during vmexit/vmentry is enabled in HV by
default. The profiling has assumption that it's only user for this
feature, which could overwrite of HV default setting.
This fix combine the msr load list for vmexit when profiling.
Tracked-On: #2422
Signed-off-by: Min Lim <min.yeol.lim@intel.com>
Since the profiling utilizes the limited size of buffer to capture
sample data, dropping samples could happen while collecting data
if data is generated faster than flushing by consumer. Capturing
the dropped sample info is critical to understand how much the data
is reliable to use.
To capture the information, the new hypercall "PROFILING_GET_STATUS"
is introduced.
Tracked-On: #2474
Signed-off-by: Manisha Chinthapally <manisha.chinthapally@intel.com>
Signed-off-by: Min Lim <min.yeol.lim@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use smp_call_function() to read/write MSR register on target PCPU
Tracked-On: #2462
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- add ept.h, and move ept related api declaration
from mmu.h to ept.h
-- move lookup_address()declaration from mmu.h to pgtable.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
move 'struct e820_entry' 'E820_TYPE_XXX' from mmu.h
to e820.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move the following files to dm folder
renamed: include/arch/x86/guest/vioapic.h -> include/dm/vioapic.h
renamed: include/arch/x86/guest/vpic.h -> include/dm/vpic.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
1. in UEFI bsp code, not need UEFI macro; it is controlled in makefile.
2. in vm/acpi/interrupt code, unify the API name for SBL & UEFI.
3. remove unnecessary header including and unused code.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
-- move vm_pic() from vm.h to vpic.c since it is
only used in vpic.c
-- move vm_ioapic() from vm.h to vioapic.c
change vioapic_reset(struct acrn_vioapic *vioapic) -->
vioapic_reset(struct acrn_vm *vm)
then vm_vioapic() is only used in vioapic.c
-- move vm_vuart() from vm.h to vuart.c,
now this api is used in vuart.c and shell.c
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
For VM with local apic pt for realtime scenatios, we support virtio device with PMD backend.
But we still need to inject MSI to notify the front-end, to avoid changing the front-end drivers.
Since the lapic is passed through, irq injection to vlapic won't work.
This commit fix it by sending IPI with vector need to inject.
Tracked-On: #2351
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This commit extend lapic pass-through for DM launched VM, generally for hard RT scenarios.
Similar to the partition mode, the vlapic is working under the xapic mode at first, only
when x2apic mode is enabled, lapic is passed through, because the physical LAPICs are
under x2apic mode.
Main changes includes:
- add is_lapic_pt() to check if a vm is created with lapic pt or not, to combine
codes of partition mode and DM launched vm with lapic passthrough, including:
- reuse the irq delievery function and rename it to dispatch_interrupt_lapic_pt();
- reuse switch_apicv_mode_x2apic();
- reuse ICR handling codes to avoid malicious IPI;
- intercept ICR/APICID/LDR msr access when lapic_pt;
- for vm with lapic passthrough, irq is always disabled under root mode.
Tracked-On: #2351
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As we enable Interrupt Remapping, bit positions in IOAPIC RTEs
have a different syntax for programming. ACRN should handle original
format for vIOAPIC as well IR representation for physical IOAPIC.
This patch adds bit granularity IOAPIC RTE.
Tracked-On: #2407
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
As we enable Interrupt Remapping, bit positions in MSI address and
data registers have a different syntax for programming. This patch adds
bit granularity for MSI address and data structs.
Tracked-On: #2407
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
-- add header file ld_sym.h in include/arch/x86/boot/
-- move 'ld_bss_start/end' from cpu.h to ld_sym.h,
avoid reverse dependency
-- move 'ld_text_end' from mmu.h to ld_sym.h
-- move 'ld_trampoline_load/start/end' to ld_sym.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The sos_vm config under arch/x86/configs/$(CONFIG_BOARD) folder should be
customer specific configuration, leave it back to customer.
When hypervisor start building, it will check whether BOARD specific sos_vm.h
exist in configs/$(CONFIG_BOARD) folder. If exist, then include this header;
if not, then include default sos_vm config header under configs/default folder.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add a API to sanitize vm_configs[] array, in this API, we will do sanity
check for VM configurations and refill some fields in vm_configs[]. If
sanity check is failed, the HV would reject to boot.
About pcpu_bitmap of SOS_VM:
We should not hard code pcpu_bitmap for SOS_VM, this is not convenient for
unconfigured boards. The pcpu_bitmap follows a very simple rule:
All physical CPUs except ocuppied by Pre-launched VMs are all belong to
SOS_VM. In this way, the pcpu_bitmap of a SOS_VM is decided by pcpu_bitmap
status in PRE_LAUNCHED_VMs.
To get the correct pcpu_bitmap of SOS_VM, We need to setup another rule, that
the vm_configs[] array should follow the order of PRE_LAUNCHED_VM - SOS_VM
strictly.
With this patch enabled, the pcpu_bitmap field of sos vm config is not needed
to configure;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
after compile, the compiled code could change rsp, so use pure asm code
to avoid such problem which will cause schedule switch failure.
Tracked-On: #2410
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
below fields are defined but not used.
- sync, pause_cnt & dbg_req_state.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The array indexx of "vm_list" may be out of bound.
Updated the size of "vm_list"
Bug: ACRN-2544
Tracked-On: #2385
Signed-off-by: Manisha Chinthapally <manisha.chinthapally@intel.com>
-- fix "Macro parameter not in brackets" for PLUG_CPU(n)
-- fix "Array has no bounds specified" for vm_configs[]
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
This is the following patch after removing pending_pre_work, it make sure
all io emulation is done on its own cpu.
For hv emulated request, it follows the steps:
hv_emulate_pio->emulate_pio_complete
hv_emulate_mmio->emulate_mmio_complete
For dm emulated request, it follows the steps:
acrn_insert_request->dm_emulate_io_complete
while in acrn_insert_request, it could trigger scheduling out then resume by
hcall_notify_ioreq_finish, or busy wait for ioreq completion if polling mode
is enabled.
Tracked-On: #2394
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Now we do not need pending_pre_work anymore, as we can make sure IO request
VCPU resume from where it paused.
Now only three fixed points will try to do schedule:
- vcpu_thread: before vm entry, will check reschedule flag and to it if needed
- default_idle: loop check reschedule flag to see if need switch out
- io request: if IO REQ need DM's handle, it will schedule out
Tracked-On: #2394
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
this patch added full context switch support for scheduling, it make sure
each VCPU has its own stack, and added host_sp field in struct sched_object
to record host stack pointer for each switch out object.
Arch related function arch_switch_to is added for context switch.
To benefit debugging, a name[] field is also added into struct sched_object.
Tracked-On: #2394
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
To support full context switch scheduling, each physical
CPU must have its own idle sched_obj.
Tracked-On: #2394
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
For binutils <= 2.26:
'U' suffix for unsigned constant is not accepted by binutils assembler.
This patch separates the MACRO definition for ASSEMBLER
and non-ASSEMBLER code in idt.h
Tracked-On: #2200
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
separate the private macro/structure/functions, which are just used
in instr_emul.c;
and move instr_emul.h to public include path.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The member of lapic_pt in acrn_vm_config will be replaced by
guest_flag of LAPIC_PASSTHROUGH;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The member of bootargs in acrn_vm_config will be replaced by
acrn_vm_os_config struct.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The member of mem_size and start_hpa in acrn_vm_config struct will
be replaced with the acrn_vm_mem_config struct;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For each vm_array[] item, its config is located in corresponding
index of vm_configs[], so vm_config pointer is not needed any more.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
All the legacy cpu configration in vm_description.c are all cleaned up;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We will use guest_flags of SECURE_WORLD_ENABLED to check wthether
sworld is supported.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch creates a new get_sos_vm() api to replace get_vm_from_vmid(0U)
because VM 0 might not be SOS VM now;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When pcpu enter guest mode, it will call launch_vms() function to launch
VMs in global vm_configs array.
In launch_vms() function, current pcpu will go through vm_config array list
and check whether it is a bsp of configured VM, if yes then it will prepare
corresponding VM and start it. The index of vm_config array will be specified
to VM id.
The first least significant bit in pcpu_bitmap means the bsp of the VM.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Under sharing mode, VM0 is identical with SOS VM. But the coupling of
SOS VM and VM 0 is not friendly for partition mode.
This patch is a pure term change of vm0 to sos VM, it does not change
any code logic or senmantic.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move this api from ept.c to io_emul.c to avoid
reverse dependency.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
move this api from io_emul.c to vm.c to avoid reverse
dependency
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
to edge interrupt, like eth device, it can triger the interrupt again
when its IRQ in softirq entry queue or in timer list.
in current design, for sofrirq entry, it calls "list_del" before
"list_add_tail", to avoid the entry added twice.
so for interrupt delay timer, add to check if it is started
then just drop the next one; to avoid it enqueue twice.
Tracked-On: #2365
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
mptable pointer in acrn_vm_config struct and also extern struct mptable_vm1/2
declared in mptable.h are not used any more, remove them.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- add new struct member for acrn_vm_config;
- add sharing_config.c file with initialized vm_config array;
- add SOS VM config header for apl-mrb/apl-nuc/up2 and dnv-cb2 board;
- and partition_config.c file with dummy vm_config array;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch is a pure term change of vm_description to vm_config,
the struct name of vm_description is changed to acrn_vm_config.
The patch does not change any code logic or senmantic.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. move the CR related code from vmcs/vcpu to vCR source files.
2. also add virtual_cr.h to acrn.doxyfile to avoid doc failure.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
-- Change acrn_vhm_vector to static, only used in io_request.c
-- Add set_vhm_vector() api, it will call this api instead of
acrn_vhm_vector except io_request.c
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- add definitions of all architectural MSRs
- add definitions of majority of non architectural MSRs
The non-architectural MSR definitions are specific to particular CPU model
or family.
e.g. MSR 0xE01 could refer to different MSRs in difference processors, and
in this patch, MSR_R0_PMON_BOX_STATUS is chosen without any particular reasons.
MSR_R0_PMON_BOX_STATUS in Xeon Processor 7500 Series
MSR_C0_PMON_EVNTSEL0 in Xeon E5 V3 family
MSR_UNC_PERF_GLOBAL_CTRL in 6th plus generations Core Processors
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Because ACRN_REQUEST_TMR_UPDATE is not needed anymore, this commit remove
the MACRO definition and its related logic, including following functions:
- apicv_batch_set_tmr()
- vlapic_apicv_batch_set_tmr()
- vlapic_set_tmr_one_vec()
- vioapic_update_tmr()
Tracked-On: #2343
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This commit changes the EOI_EXIT_BITMAP as follows:
- add a eoi_exit_bitmap to vlapic structure;
- go through all the RTEs and set eoi_exit_bitmap in the vlapic structure when related RTE fields are modified;
- add ACRN_REQUEST_EOI_EXIT_UPDATE, if eoi_exit_bitmap changed, request the corresponding vcpu to write the bitmap
to VMCS.
Tracked-On: #2343
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Current ACRN implementation update TMR bits one time only when related RTE fields changed,
which is not acting like actual hardware.
From SDM vol3 10.8.4:
"Upon acceptance of an interrupt into the IRR, the corresponding TMR bit is cleared for
edge-triggered interrupts and set for leveltriggered interrupts."
This commit change the ACRN implementation to set/clear corresponding TMR bit when inject
intr to vlapic.
Tracked-On: #2343
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The struct vm_lu_mem_map is not used by code. Remove it.
Also, add bracks () for the variables in macro foreach_vcpu.
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
An external object or function shall be declared once in one and only one file.
Since it already declared in include/arch/x86/security.h, we shall remove it.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
The MISRA C stardand do not allow change parameter passed by value
Tracked-On: #861
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
120D: Pointer param should be declared pointer to const.
add 'const' qualifier to function signatures when it's possible.
- vioapic_set_irqline_nolock()
- vioapic_set_irqline_lock()
- master_pic()
- vpic_ocw2()
- vpic_ocw3()
- vpic_set_irqline()
- vpic_get_irqline_trigger_mode()
- vm_pic()
- vm_ioapic
93S: Value is not of appropriate type.
change '0' to '0U' in function vpic_icw1().
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Header file shall not be included multiple times.
The following prototype shall be used.
#ifndef INIT_H
#define INIT_H
/* body */
#endif /* INIT_H*/
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
fix
1."Value is not of appropriate type."
2."Function prototype/defn param type mismatch"
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
120D: Pointer param should be declared pointer to const.
Add 'const' qualifier to function parameters whenever it's possible:
alloc_pci_vdev()
enumerate_pci_dev()
pci_scan_bus()
pci_enumeration_cb()
partition_mode_vpci_init()
partition_mode_vpci_deinit()
sharing_mode_vpci_init()
sharing_mode_vpci_deinit()
vpci_cleanup()
45D: Pointer not checked for null before use.
Check pointer vm in vpci_reset_ptdev_intr_info() before using it.
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Merge separated mptable.c of BOARDs to unified vmptable.c;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This is the profiling code cleanup to avoid type conversion
and align tab/space in data structure definition
Tracked-On: #2257
Signed-off-by: Min Lim <min.yeol.lim@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are the following definitions in hypervisor,
define IOAPIC_INVALID_PIN 0xffU
define VPIC_INVALID_PIN 0xffU
define PTDEV_INVALID_PIN 0xffU
this patch unify them to:
define INVALID_INTERRUPT_PIN 0xffffffffU
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Change the type from uint8_t to uint32_t for shell and vuart
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Change the type from uint8_t to uint32_t
-- Remove some typecast
-- Change union source_id
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Change the type from uint8_t to uint32_t
-- Remove some typecast
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Change the type from uint8_t to uint32_t
-- Remove some typecast
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Change the type from uint8_t to uint32_t for interrupt pin
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
All features controlled by IA32_FEATURE_CONTROL are disabled from guests,
so set the Lock bit to prevent it from writing by guests.
Also hide the MSR_IA32_FEATURE_CONTROL_VMX_NO_SMX bit from guest.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Silicon Debug Feature: CPUID.01H.ECX[11]
- We can't allow guests to have direct access to silicon wide resources.
Machine Check Exception: CPUID.01H.EDX[5]
- Need HV support before exposing it to the guests.
Perfmon and Debug: CPUID.01H.ECX[15]
Debug Store: CPUID.01H.EDX[21], CPUID.01H.ECX[2], CPUID.01H.ECX[4]
- HV emulation is needed to separate host and guest monitoring data.
- guest CPUID.0AH is forced to all-zero in ACRN so it makes sense to clear
these bits as well.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Typedefs that indicate size and signedness should be used in place of
the basic numerical types
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
1. add static for local functions and variables.
2. move vm_sw_loader from vcpu to vm
3. refine uefi.c to follow the code rules.
4. separate uefi.c for vm0 boot and bsp two parts. bsp layer just
access native HW related, can't access vm/vcpu, vm0 boot part can
access vm / vcpu data structure.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
-- Change boot_cpu_data to static, only used in cpu_caps.c,
-- Add get_cpu_info() api, it will call this api instead of
boot_cpu_data except cpu_caps.c
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
-- move structure 'cpu_state_info' from cpu_caps.h to host_pm.h
-- add get_cpu_pm_state_info() api
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
SMRR (System-Management Range Register) is disabled from vMTRR,
so treat IA32_SMRR_PHYSBASE and IA32_SMRR_PHYSMASK as unsupported.
IA32_SMBASE is available only when IA32_VMX_MISC[15] is set.
IA32_FIXED_CTR0/1/2 are available only when CPUID.0AH:EDX[4:0] is non-zero.
Intel Processor Trace feature has been disabled and the associated MSRs
need to be in unsupported_msr[] as well.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If a argment is not changed in function, MISRA recommends to add const
qualifier for that argement.
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move the debug related command handle into debug/dbg_cmd.c;
so release build will not include that.
Tracked-On: #2170
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. add an API to support vuart COM base and irq configured;
2. add the HV cmd to be parsed for vuart COM base & irq.
Tracked-On: #2170
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move CONFIG_COM_IRQ code into vuart, because it is just
used for vuart.
Tracked-On: #2170
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vuart it used for SOS to output log to HV console,
so if dbg uart is disabled, it need be disabled too:
just unregister its PIO.
Tracked-On: 2170
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1) Use __attribute__((packed)) instead of #pragma pack(1)
2) Use the defined data type __packed instead of __attribute__((packed))
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Replace PAGE_SHIFT with MSI_ADDR_DEST_SHIFT in ptirq_build_physical_msi(), since it's not correct in semantics.
Tracked-On: #2209
Signed-off-by: Yan, Like <like.yan@intel.com>
-- Change pcpu_active_bitmap to static, only used in
cpu.c
-- add get_pcpu_active_bitmap()
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Profiling tools are broken, which cause page faults during collection.
The issue happens by enabling SMAP recently. Therefore,
we use stac() and clac() to allow access to buffers allocated by guest.
Tacked-On: #2157
Signed-off-by: Min Lim <min.yeol.lim@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IO completion polling will access vcpu and vm structs. If doing it in
idle thread, there might be some race issues between vm destroying and
idle thread. They are running on different cores.
Got suggestion from Fengwei, decouple the polling action from idle
thread and just do it in vcpu thread, then we can guarantee idle thread
in really idle status.
Tracked-On: #1821
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Now, need_reschedule will test_and_clear the bit NEED_RESCHEDULE in
schedule context, then call schedule. It is not a exact match with the
name.
This patch move the flag clearing into scheudle, and need_reschedule
just check and return.
Tracked-On: #1821
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Two changes:
1. cpuid leaf 07h has subleaf:
According to SDM 3-194 Vol.2A, Table 3-8, cpuid leaf 07h has sub-leaves.
cpuid.07.eax reports the maximum input for sub-leaves.
Since there is no definition for subleaf > 0 in SDM, hv only supports subleaf 0.
2. In currently hv code, cpuid leaf function 14h is disabled,
CPUID.07H:EBX.INTEL_PROCESSOR_TRACE should be disabled as well.
Tracked-On: #2198
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
this function is not from libc but has the same name,
atoi() in libc is unbounded and not safe.
replace this function with 'strtol_deci()' in this case.
Tracked-On: #2187
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fixes the MISRA-C violations related to mmio_read**
* add `const` qualifier in implementation of mmio_read**
`const` qualifier shall be added
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
- bugfix:the actual 'size' of memory region that
to be updated is incorrect.
- replace CONFIG_UEFI_STUB with DMAR_PARSE_ENABLED
when update memory pages for ACPI_RECLAIM region,
as DMAR_PARSE_ENABLED may be enabled on non-EFI
platform.
V2 update:
wrap roundup to 2M and rounddown to 2M inline
functions.
Tracked-On: #2056
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
- add API get trampoline_start16_paddr() instead
of exporting this global variable.
- other minor update.
Tracked-On: #2095
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch does the following changes
According to VT-d spec Section 6.8 "Write Buffer Flushing" DRAM write buffers
are flushed implicitly upon Remapping Hardware Caches Invalidation even on
platforms that set RWBF to 1 in capability register. So removed write buffer
flushing as current ACRN issues cache invalidation commands in all cases.
Tracked-On: #1855
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Table contents weren't rendered correctly in
developer-guides/hld/hv-io-emulation.html, so
fix the doxygen comments.
Tracked-on: #1684
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Try to minimize the C code in inline assembly function. Now only
construct data structure and return a value is permitted.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
use struct sched_object as the main interface of scheduling, then
make scheduler as an independent module to vcpu:
- add struct sched_object as one field in struct vcpu
- define sched_object.thread for switch_to thread
- define sched_object.prepare_switch_out/in for prepare_switch before
switch_to
- move context_switch_out/context_switch_in into vcpu.c as
vcpu.sched_obj.prepare_switch_out/in
- make default_idle as global idle.thread for idle_thread
- make vcpu_thread as vcpu.sched_obj.thread for each vcpu thread
- simplify switch_to based on sched_object
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <edide.dong@intel.com>
just use pcpu_id for make_reschedule_request is enough
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <edide.dong@intel.com>
add struct sched_object, and use it as input param instead of vcpu for
below functions:
- add_to_cpu_runqueue renamed from add_vcpu_to_runqueue
- remove_from_cpu_runqueue renamed from remove_vcpu_from_runqueue
- get_next_sched_obj added to get next sched object
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <edide.dong@intel.com>
This patch fix MISRA-C violations in arch/x86/vtd.c
on pointer param should be declared pointer to const.
Tracked-On: #861
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This adds few functions to access the daata structures
defined inside ioapic.c. Removes the same data structures
from ioapic.h
Also this modifies some of the names of existing APIs to
conform to the ioapic module name.
Modified gsi_table identifier to gs_table_data, to avoid
a MISRA C Violation.
Tracked-On: #1842
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
acrntrace/log kernel modules will use this hypercall to fetch
pcpu num of hardware platform. Then, initialize driver accordingly.
Tracked-On: #1775;#1776
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
-- fix "more than one exit point" and "goto detected" violations
-- change prepare_vm0_memmap to void type
-- Add free_vm_id when create vm failed
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1) Fix procedure has more than one exit point.
2) Add some brackets to make logical conjunctions more readable.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Now one macro is added to define the alignment requirement.
>#define __aligned(x) __attribute__((aligned(x)))
Some code uses the __aligned(x) to define the alignment while the other
code uses the original alignment definition.
So they are unified.
Tracked-On: projectacrn/acrn-hypervisor#2131
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch fixes the MISRA-C violations on implicit type conversion.
For ptirq vpin source type, there is no need to define a enum.
Remove enum ptirq_vpin_source.
Define two macro:
- PTDEV_VPIN_IOAPIC
- PTDEV_VPIN_PIC
Tracked-On: #861
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch moves `atoi` and `strtol_dec` to debug directory
since they are only used by code under debug directory.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch fixes the MISRA-C violations in lib/string.c
* add the required brackets for logical conjunctions
* replace the basic type `long` with defined type `int64_t`
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This commit fixed following violations:
- Procedure has more than one exit point: free_irq_vector/request_irq/dispatch_interrupt
- goto detected: dispatch_interrupt
- Pointer param should be declared pointer to const: fixup_idt
- basic type declaration used: fixup_idt
Tracked-On: #861
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fixs MISRAC violations in common/ptdev.c and include/common/ptdev.h
Tracked-On: #861
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Gloabal variable should be declared constant wherever possible to avoid unintentional
modification.
Tracked-On: #861
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MIRSA-C requires the const qualifier should be applied to pointer parameters
that address data not subject to change in rule 120D.
Tracked-On #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. move out vm related code from arch/pm.
2. remove unnecssary global variables.
3. keep the global variables as static, not used
by other modules directlly.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
78D: Global variable should be declared const.
Global variables should be declared constant wherever possible to
avoid unintentional modification.
27D: Variable should be declared static
pci_ops_vdev_msi is not accessed by other files. Remove the declaration
from the header and define it with the static qualifier; Because it's
referenced by populate_msi_struct(), so move the define statements forward.
33D: No real declaration for external variable
certain variables are available in sharing mode or partition mode only,
so that the declarations in header files must be enclosed with
CONFIG_PARTITION_MODE
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
-- fix MISRA-C violation "procedure has more than one exit point"
for this api
-- change start_vm to void type since it is always return 0
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
No one uses it and it's some duplicated with strchr.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
add get_ibrs_type API to get ibrs type.
this patch fix Misra C violation:
filename:/hypervisor/arch/x86/security.c function:None offset:19:
reason:Variable should be declared static. : ibrs_type
Tracked-On: #861
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
there are still some security related funcs in cpu_caps.c & cpu.c,
move them out into security.c.
Changes to be committed:
modified: Makefile
modified: arch/x86/cpu.c
modified: arch/x86/cpu_caps.c
modified: arch/x86/guest/vcpu.c
new file: arch/x86/security.c
modified: arch/x86/trusty.c
modified: arch/x86/vmx_asm.S
modified: include/arch/x86/cpu.h
modified: include/arch/x86/cpu_caps.h
modified: include/arch/x86/per_cpu.h
new file: include/arch/x86/security.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
- we should not use print function before tsc setup
- is_ept_supported is internal API
- add is_apicv_supported to check apicv feature
- rename some functions to verb+obj format or better name
Changes to be committed:
modified: arch/x86/cpu.c
modified: arch/x86/cpu_caps.c
modified: include/arch/x86/cpu_caps.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
has_monitor_cap is more suitable name
v2:
- rename to has_monitor_cap
Changes to be committed:
modified: arch/x86/cpu.c
modified: arch/x86/cpu_caps.c
modified: include/arch/x86/cpu_caps.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move cpu caps related functions like capability init/detect/check
in cpu.c & mmu.c into a new file cpu_caps.c
Changes to be committed:
modified: developer-guides/hld/hv-memmgt.rst
modified: ../hypervisor/Makefile
modified: ../hypervisor/arch/x86/cpu.c
new file: ../hypervisor/arch/x86/cpu_caps.c
modified: ../hypervisor/arch/x86/mmu.c
modified: ../hypervisor/arch/x86/vmx_asm.S
modified: ../hypervisor/include/arch/x86/cpu.h
new file: ../hypervisor/include/arch/x86/cpu_caps.h
modified: ../hypervisor/include/arch/x86/guest/vm.h
modified: ../hypervisor/include/arch/x86/mmu.h
modified: ../hypervisor/include/arch/x86/vmcs.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use enhanced rep fast-string operation to refine memcpy_s.
And assume that the destination and the source would not overlap.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
For security, this patch add one flag per vm and disable snoop control
for sos and enable snoop control for uos by default.
v2: add one flag in vm, not in iommu domain.
v3: add vm null check
Tracked-On: #2086
Signed-off-by: Zhipeng Gong <zhipeng.gong@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
13X: Identifier reuse: tag vs component.
A tag name shall be a unique identifier
Change the following names:
struct msi --> struct pci_msi
struct msix --> struct pci_msix
struct vpci --> struct acrn_vpci
union cfgdata -> union pci_cfgdata
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vmx.c should only take care host vmx operations, which should not
contain vcpu reference, so refine vmx on/off APIs, move out use
of vcpu by adding one per cpu vmcs_run pointer.
as now each pcpu only run on one vcpu, so just keep running vmcs
in per cpu vmcs_run pointer is enough.
Changes to be committed:
modified: arch/x86/cpu.c
modified: arch/x86/init.c
modified: arch/x86/pm.c
modified: arch/x86/vmcs.c
modified: arch/x86/vmx.c
modified: include/arch/x86/per_cpu.h
modified: include/arch/x86/vmx.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove no need included header files and macro definitions
Changes to be committed:
modified: arch/x86/vmcs.c
modified: include/arch/x86/vmcs.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
one part is pure vmx operations which keeps in vmx.c
the other part is vmcs operations which is vcpu related, move them
into vmcs.c
Changes to be committed:
modified: Makefile
copied: arch/x86/vmx.c -> arch/x86/vmcs.c
modified: arch/x86/vmx.c
modified: arch/x86/vmx_asm.S
modified: include/arch/x86/hv_arch.h
new file: include/arch/x86/vmcs.h
modified: include/arch/x86/vmx.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
By switching AP wakeup from broadcast to one by one, we could
set correct stack for each AP and drop the temp stack used during
AP boot.
Tracked-On: #2034
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
there is no need to clear CR4.TSD as there is no user mode
in ACRN hypervisor.
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
36D Prototype and definition name mismatch
pci_scan_bus() and sharing_mode_find_vdev() wrong parameter in prototype.
14D Attempt to change parameter passed by value.
vmsix_table_rw() uses function parameter as local viarable.
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
106D No prototype for non-static function.
2 functions missing prototyle declarations in header file.
120S Use of bit operator on signed type.
123S Use of underlying enum representation value.
enum values are treated like unsigned integer in vmsr.c
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
With SMAP enabled, hypervisor can't access pages that
owned by guest(either SOS or UOS), and an override is
is provided: stac()/clac() to enable/disable access to
guest's memory pages.
Pre-conditon:
Mark hypervisor owned pages as supervisor mode (U/S = 0),
and set all othter memory pages as user mode (U/S = 1).
Tracked-On: #2056
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
MTRR emulation belongs to virtual CPU component.
- rename mtrr.c to vmtrr.c and move it to arch/x86/guest
- rename mtrr.h to vmtrr.h and move it to include/arch/x86/guest
Tracked-On: #1842
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Intercept IA32_TSC_ADJUST MSR so that writing IA32_TSC_ADJUST from the
guests won't impact the TSC in root mode or potentially other vCPUs in
the same pCPU.
- MSR TSC_ADJUST needs to be isolated between normal and secure world,
so it's included in NUM_WORLD_MSRS.
- Upon writing to either IA32_TSC_ADJUST or IA32_TSC from the guests,
don't write to physical MSRS so it won't impact the host side, but
update the TSC offset VM-execution control.
- don't need to intercept rdmsr for IA32_TIME_STAMP_COUNTER.
- add the missing statement in save_world_ctx() to save the tsc_offset
during world switch.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
hypervisor initilization component triggered by boot component,
and it calls different components initilization functions from
the highest layer.
this patch added init.c and move reorged cpu init functions into
it, keep hardware management functions in cpu.c but move other
components' init function into init.c.
the hypervisor initilization components will call:
- init_cpu_pre
- init_cpu_post
- init_bsp
- init_debug_pre
- init_debug_post
- init_guest
- init_passthru
- enter_guest_mode
the hypervisor initilization component include files:
arch/x86/init.c
include/arch/x86/init.h
this component is higest layer, so there is no reverse dependencies for it.
v2:
- separate into 2 patches, 1 for reorg, 1 for pure move.
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
This patch fixes incorrect vm_id captured when sampling PMU data. Currently,
the vm_id gets attributed to ACRN hypervisor, rather than actual guest vm_id.
The issue is identified that the existing code captures the guest vm info
after vmexit_hander function is completed, in which the profiling module
points its context to VMM. When the vmexit happens by PMI, the guest context
should be captured so that the attribution to proper guest vm can happen.
This change will also allow to capture more accurate TSC when vmexit happens.
Tracked-On: #2043
Signed-off-by: Min Lim <min.yeol.lim@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
functions like set_vcpuid_entries & guest_cpuid should only
server for virtual cpuid, so move such kind of functions
to guest/vcpuid.c.
and all native cpuid APIs will keep in cpuid.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- enable NX feature in hypervisor:
1. Set 'XD' bit for all pages, including pages for guests
when initialize MMU tables in hypervisor.
2. remove 'XD' bit for pages that contain hypervisor instructions.
3. enable MSR EFER.NXE,which will enable page access restriction by
preventing instruction fetches form pages with XD bit set.
- remove "-Wl -z noexecstack" GCC flag option in hypervisor
Makefile as it would not affect stack attribute in hyervisor,
which setup stack itself, instead of by loader.
Tracked-On: #1122
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. change its APIs as more indepentent, and modify the callers' code
2. limit its global variables as static, and return const to the callers
3. remove unused code in "CONFIG_CMA"
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. e820 is modulized as separated files.
2. move boot_regs into multiboot.h as it's related with
multiboot info header
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
based on previous patch, we can move idt.S and idt.h out of boot component
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently there are two fields in ext_context to emulate IA32_PAT MSR:
- ia32_pat: hold the value of the emulated IA32_PAT MSR
- vmx_ia32_pat: used for load/store IA32_PAT MSR during world switch
This patch moves ext_context->ia32_pat to the common placeholder for
emulated MSRs acrn_vcpu_arch->guest_msrs[].
Also it renames ext_context->vmx_ia32_pat to ext_context->ia32_pat to
retain same naming convention in struct ext_context.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- implement unified APIs to access guest_msrs[] under struct acrn_vcpu.
- use these new APIs to read/write emulated TSC_DEADLINE MSR
- switch world_msrs[] and guest_msrs[] during world switch for MSRs that
need world isolation
- remove the old guest_msrs[] array and it's index macros.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Create two arrays for emulated MSRs:
- guest_msrs[] in struct acrn_vcpu_arch: emulation for all MSRs that are
included in emulated_guest_msrs[].
- world_msrs[] in struct cpu_context: it has separate copies for secure and
normal world for those MSRs that are in the first NUM_WORLD_MSRS entries
in emulated_guest_msrs[].
Split vmsr.c/emulated_msrs[] into 3 smaller arrays:
- emulated_guest_msrs[]: corresponding MSRs are emulated in guest_msrs[]
- mtrr_msrs[]: emulated MTRRs are saved in vMTRR module
- unsupported_msrs[]: GP for any guest accesses
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Identifier reuse may arise confusion. So should minimize the case of it
as much as possible. This patch is try to do this except the PCI related
module.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
On platforms, that do not support APICv register virtualization, all the
x2APIC MSRs need to intercepted by ACRN for emulation.
Tracked-On: #1973
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
This patch does:
- remove the unused API declaration
- fix use of uninitialized variable in instr_emul.c
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds more comment to describe functions that are
interfaces to the other modules in the hypervisor. The comments
are in doxygen-style for document generation.
Tracked-On: #1595
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
This patch adds the necessary space before or after binary operator.
v1 -> v2:
* minor fix related to integer
[i - 1] ====> [i - 1U]
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Input parameter of mmio_write64/mmio_write32/mmio_write16/mmio_write8
should be 'void *addr' rather than 'const void *addr' since the object
pointed by 'addr' is modified in these operations.
This patch change the param type of mmio_write** and update its usage
accordingly.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
replace CPU_PAGE_MASK with PAGE_MASK
These two MACROs are duplicated and PAGE_MASK is a more reasonable name.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- replace CPU_PAGE_SHIFT with PAGE_SHIFT
These two MACROs are duplicated and PAGE_SHIFT is a more
reasonable name.
- remove unused MACROs related to page shift in cpu.h
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
replace CPU_PAGE_SIZE with PAGE_SIZE
These two MACROs are duplicated and PAGE_SIZE is a more reasonable name.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
separate the function definitions into debug/release directories
to better distinguish debug/release libraries
v1 -> v2:
- sbuf_get is defined in 'debug/sbuf.c' but not used anywhere.
remove the declaration in 'include/debug/sbuf.h' and keep the
definition in 'debug/sbuf.c' in case it will used later.
- sbuf_put and sbuf_share_setup is not used under RELEASE version.
remove the file 'release/sbuf.c'.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
serial PCI device is just used for HV/SOS output debug information;
because it is used in hypervisor layer, SOS should not touch it.
so need to check and hide it from SOS.
Tracked-On: #1923
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IEC 61508,ISO 26262 standards highly recommend single-exit rule.
Reduce the count of the "return entries".
Fix the violations which is comply with the cases list below:
1.Function has 2 return entries.
2.The first return entry is used to return the error code of
checking variable whether is valid.
Fix the violations in "if else" format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IEC 61508,ISO 26262 standards highly recommend single-exit rule.
Reduce the count of the "return entries".
Fix the violations which is comply with the cases list below:
1.Function has 2 return entries.
2.The first return entry is used to return the error code of
checking variable whether is valid.
Fix the violations in "if else" format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Boot component prepares the very basic platform boot env. It finally call
into platform initilization entries:
- bsp_boot_init & cpu_secondary_init for start up
- or restore_s3_context for wakeup
this patch is the final one, it did some code clean up and move some definition
from vm0_boot.h to boot_context.h.
after this patch, the boot component include files:
arch/x86/boot/cpu_primary.S
arch/x86/boot/trampoline.S
arch/x86/boot/cpu_save_boot_ctx.S
arch/x86/boot/idt.S
boot/reloc.c
boot/include/reloc.h
include/arch/x86/boot/idt.h
include/arch/x86/boot/boot_context.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Boot component prepares the very basic platform boot env. It finally call
into platform initilization entries:
- bsp_boot_init & cpu_secondary_init for start up
- or restore_s3_context for wakeup
this patch moves set_idt from header file to irq.c
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Boot component prepares the very basic platform boot env. It finally call
into platform initilization entries:
- bsp_boot_init & cpu_secondary_init for start up
- or restore_s3_context for wakeup
this patch move functions for AP trampoline into trampoline.c from reloc.c
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
This patch fixes the following violations:
1. Implicit conversion: actual to formal param
2. Value is not of appropriate type
3. No cast for widening complex int expression
4. Widening cast on complex integer expression
5. Narrower int conversion without cast.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Now it's using the memory reserve by hypervisor. So there's not
necessaty to map or ummap this region from SOS.
Tracked-On: #1942
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
The previous would reserve memory for trusty in SOS kernel. Howerer,
there would no available 16 MB continue memory any more after a long time.
This result in allocating memory for trusty failed. This patch will reserve
memory for trusty in ACRN hypervisor in which case the memory allocation
for trusty will never fail.
Tracked-On: #1942
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Regarding SGX, guests could access CPUID.07H.EBX[2] before query CPUID
leaf 12H.
Intel SDM 36.7.2: "If CPUID.(EAX=07H, ECX=0H):EBX.SGX = 1, the processor
also supports querying CPUID with EAX=12H on Intel SGX resource capability
and configuration."
Clear CPUID.07H.ECX[30] SGX_LC to make the guest view consistent.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
`@return` is dedicated for brief description of return values, not for comments
stating actual return values. In addition, sphinx + breathe does not join
multiple adjacent `@return`. This results in multiple `Return` sections in the
generated document, which is confusing.
This patch replaces `@return` with `@retval` for the lists of return
values. Adjacent `@retval` can be joined into one list by breathe.
v1 -> v2:
* Replace return value descriptions like `negative` and `positive` with
expressions like `<0` and `>0` in `@retval`.
* Keep the list of `@retval` comprehensive, even when there is a `@return` to
generally describe what the return value means.
* Drop duplicated `@return` when it does not give more information than the
`@retval` list.
Tracked-On: #1595
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
It is preferred to state the absence of a return value explicitly in the
doxygen-stile comments. Currently there are different styles of doing this,
including:
@return None
@return NULL
@return void
@return N/A
This patch unifies the above with `@return None`.
Tracked-On: #1595
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
As SOS has already adapted to the new state transition of VHM requests for a
month, the old `valid` field can now be safely obsoleted.
This patch changes the `valid` field as reserved and drops all the code that
reads or modifies this field for backward compatibility. The embedded comments
are updated accordingly, following the doxygen style.
Tracked-On: #875
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Boot component prepares the very basic platform boot env. It finally call
into platform initilization entries:
- bsp_boot_init & cpu_secondary_init for start up
- or restore_s3_context for wakeup
This patch just move files into reorg dir.
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
IEC 61508,ISO 26262 standards highly recommend single-exit rule.
Reduce the count of the "return entries".
Fix the violations which is comply with the cases list below:
1.Function has 2 return entries.
2.The first return entry is used to return the error code of
checking variable whether is valid.
Fix the violations in "if else" format.
V1->V2:
make the return value match to int32_t
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
seperate the function definitions into debug/release directories
to better distinguish debug/release libraries
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
seperate the function definitions into debug/release directories
to better distinguish debug/release libraries
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
seperate the function definitions into debug/release directories
to better distinguish debug/release libraries
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
seperate the function definitions into debug/release directories
to better distinguish debug/release libraries
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
seperate the function definitions into debug/release directories
to better distinguish debug/release libraries
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
seperate the function definitions into debug/release directories
to better distinguish debug/release libraries
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
seperate the function definitions into debug/release directories
to better distinguish debug/release libraries
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IEC 61508,ISO 26262 standards highly recommend single-exit rule.
Reduce the count of the "return entries".
Fix the violations which is comply with the cases list below:
1.Function has 2 return entries.
2.The first return entry is used to return the error code of
checking variable whether is valid.
Fix the violations in "if else" format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch remove early logbuf support which is used to hold
log massges before shared buf setup by SOS.
Tracked-On: #1801
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Currently guest IA32_TSC_AUX MSR is loaded manually right before VM
entry, and saved right after VM exit.
This patch enables VM-Entry Control and VM-Exit Control to switch
MSR IA32_TSC_AUX between host and guest automatically. This helps to
keep vcpu_thread() function and struct acrn_vcpu cleaner.
Also it removes the dead code of intercepting IA32_TSC_AUX.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove the usage of HV_DEBUG related to shell command in assign.c
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove the usage of HV_DEBUG in vioapic.c
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove the usage of HV_DEBUG in ioapic.c
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now if the vmexit reason is virtulized EOI for level triggered
interrupts, HV will loop all the ptdev entries, it is time-consuming,
this patch add vpin to ptdev entry mapping for vpic and vioapic
when add intx entry for a vm,it can use the ptdev entry directly
according to the mapping for vpin and ptdev entry when EOI vmexit.
v3-->v4:
-- add check vpin in remove_intx_remapping
-- move check vpin from ptdev_add_intx_remapping to add_intx_remapping
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
-- Config MAX_PT_IRQ_ENTRIES 64 in Kconfig
-- Remove ptdev list
-- Add alloc_ptdev_entry_id api
v3-->v4:
-- move is_entry_active from assign.c to ptdev.h
-- Add clear active flag in release_entry
v2-->v3:
-- Remove redundancy active check for ptdev entry
in release_all_entries and get_ptdev_info
v1-->v2:
-- split to small patches
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
- fix code style: mix of tab and white spaces, alignments, etc.
- remove not meaningful comments. Also these comments are below the
source code which makes the code look messy.
- add more MSR register definitions
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch introduce a new mode of IO request completion, polling mode.
Now, the sketch of ioreq process can be,
A. UOS vcpu0 generate PIO/MMIO ->
B. pcpu1(vcpu0 of UOS) trap into HV ->
C. pcpu1 build ioreq, send IPI and enter idle ->
D.1 pcpu0(vcpu0 of SOS) response IPI,
D.2 pcpu0 handle the ioreq in HV, kernel, DM,
D.3 pcpu0 mark ioreq as complete,
D.4 pcpu0 hypercall to enter HV ->
E.1 pcpu0 send IPI to wake pcpu1 up
E.2 UOS vcpu0 continue running
With this change, it skips D.4, E.1 steps. In step C, pcpu1 will enter a
polling ioreq state idle after send out the IPI.
It can save about ~5000 cpu cycles.
In polling mode, we do the polling in idle instead of pause cpu all the
time. It will consume more power. A better way is to use monitor/mwait
instructions which can put cpu into a sleep state with monitoring a
memory address. Unfortunately, APL has bug with monitor. We can gather
all ioreqs state into one monitorable memory and take advantage of
monitor/mwait for future platform.
The way polling or notification is per VM. We can config VMs in
different mode. By default, IO request completion will use notification
mode for all VMs. We can switch it by Kconfig.
Tracked-On: #1821
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch adds more comments to describe the structures and functions of vtd
that are public to the other components in the hypervisor. The comments are in
doxygen-style for document generation.
Tracked-On: #1595
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Becuase the number of character of a line is 120.
Merge lines for a statement if needed.
Tracked-On: #1855
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove the usage of HV_DEBUG in hypercall.c and vmcall.c
TO-DO:
Enhance Makefile to compile debug/release into 2 libraries
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
CSE FW uses an AEK (Attestation keybox Encryption Key) to encrypt the keybox
with AES-256-GCM algorithm before sending it to Android/Trusty. This key is
derived from the latest platform Seed by CSE FW with KDF (key derivation function)
HMAC-SHA256. After Trusty retrieves this encrypted keybox over HECI/MEI driver,
Trusty needs the same AEKkey to decrypt it. Hence, before Trusty launches,
Hypervisor derives the same AEK key from Platform Seed with the same algorithm
and the same derivation parameters, then sends this AEK along with Trusty vSeed
to Trusty world memory.
Since Platform Seed is only visible to Hypervisor and it must not be
sent to any guest VM, only Hypervisor can derive this AEK from this
Platform Seed, just like previous per-Trusty virtual Seed derivation.
Please note that Android Attestation Keybox is shared in a single hardware
platform, so all the Trusty instance/world can get the same AEK for
decryption even if there are multiple Android User OS/VMs running
on top of Hypervisor.
v1 --> v2:
Add detailed description why we need the patch to derive an extra key
v2 --> v3:
Convert API descriptions to Doxygen
Tracked-On: #1812
Reviewed-by: Bing Zhu <bing.zhu@intel.com>
Reviewed-by: Kai Wang <kai.z.wang@intel.com>
Signed-off-by: Chen Gang G <gang.g.chen@intel.com>
Acked-by: Bing Zhu <bing.zhu@intel.com>
Register separate I/O emulation handlers for I/O port CF8 and CFC. This
makes the code simpler, and offers some flexibilities to be able to handle
CF8 and CFC ports differently.
Tracked-On: #1815
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
An I/O handler is not linked to the I/O access size, so in searching for
the registered I/O handler, don't need to check the I/O request's access
size.
In struct vm_io_handler_desc, change fields addr and len to port_start and
port_end respectively to adapt to this change.
Tracked-On: #1815
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. CPU_SEG_WRITE->CPU_SEG_READ: it's actually seg read
2. 0x%hu -> 0x%x: it need print hex format
Tracked-On: #1833
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
- Remove the usage of HV_DEBUG in hv_main.c
The usage of HV_DEBUG in hv_main.c is for the shell command 'vmexit'.
Since vmexit info has been captured by acrntrace, there is no need to
keep this duplicated feature in shell command.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Adding Kconfig option to define the vuart port base address/IRQ.
By default, use 0x3F8/IRQ4. For MRB, use 0x3E8/IRQ6.
We are experiencing problems on NUC after changing from 0x3F8/IRQ4
to 0x3E8/IRQ6.
Tracked-On: #1817
Change-Id: Ie407e51a7bc25ac0bb4c61453c969f1466fa33ca
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Due to the side-effect to cache of "wbinvd" instruction, just apply it
in case of noncoherent DMA.
Tracked-On: #1824
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
ioreqs acrossing VM reset is meaningless. So we reset their status when
VM reset.
Please note, device model and service os need to handle various ioreqs
pending status in emergency reset condition carefully. Otherwises, the
post processing of such ioreqs might overwrite this reset.
Tracked-On: projectacrn#1821
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires that the function call in which the returned
value is discarded shall be clearly indicated using (void).
This patch fixes the violations related to the following
function calls.
- instr_check_gva
- vlapic_set_local_intr
- prepare_vm
- enter_s3
- emulate_instruction
- ptdev_intx_pin_remap
- register_mmio_emulation_handler
v1 -> v2:
* discard the return value of enter_s3
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
fix the following integer violations:
1. Signed/unsigned conversion without cast
2. Literal value requires a U suffix
3. Implicit conversion of underlying type
v3 -> v4:
* change the type of npk_loglevel/mem_loglevel/console_loglevel
from uint32_t to uint16_t
v2 -> v3:
* discard the return value of update_ept
* discard changes related to npk loglevel
v1 -> v2:
* remove the unnecessary changes related to the false positive
issues caused by scanning tool
* change the type of the local variable 'vlapic_id' from uint8_t
to uint32_t in function 'vlapic_build_id'
* change the type of the struct member 'flags' in shared_buf from
uint64_t to uint32_t
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires that the function call in which the returned
value is discarded shall be clearly indicated using (void).
This patch fixes the violations related to the following
function calls.
- vlapic_set_intr
- vlapic_intr_edge
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Misra C reqires assembly code should comply with
the rules list below:
The assembly code's functionality should match the function's
name.If not,pls encapsulate the assembly code and give a suitable
name for describing the functionality.
V1->V2:
1.remove the dead code
2.update detail comment
V2->V3:
1.replace the macro name with upper case.
2.remove the typedef and rename the struct name
"_descriptor_table_" to "descriptor_table".
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Config MAX_EMULATED_MMIO_REGIONS 16 in Kconfig
-- Add emulated mmio array and emulated mmio regions
in vm structure
-- Remove mmio list in vm structure
-- Remove unregister_mmio_emulation_handler and
vioapic_cleanup APIs
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Add emulated port io index
-- Add emulated pio array in vm structure
-- Remove port list in vm structure
-- Remove free_io_emulation_resource/register_io_handler/
create_io_handler APIs
v2-->v3:
-- not add 'is_emulated', check len == 0U
-- Check if io_read/io_write handler is NULL before calling
-- Replace ENUM with MACRO for emulated pio index to avoid
MISRA-C violations
v1-->v2:
-- Remove EMUL_PIO_NUM in Kconfig, add emulated pio index
for PIC/PCI/UART/RTC/PM
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The the bdf(bus/dev/func) is used to determine which pass-through device should
be assigned/released. Now the hypervisor parses the corresponding bdf from the guest
physical address when hcall_assign_ptdev/hcall_deassign_ptdev is called.
As it is only uint16_t, it is unnecessary to use the GPA to pass the bdf parameter.
Instead the parameter can be used as the bdf directly.
In order to keep the compatibility, it still can get the bdf by using
copy_from_gpa when SOS passes the parameter based on the buffer. But this will
be depreciated.
This is based on the assumption that the GPA in SOS is greater than 0x10000
when one buffer is allocated to pass the corresponding hypercall parameter.
After the SOS uses the bdf to pass the hypercall paremeter, we can remove the code
that gets the bdf by using copy_from_gpa.
V1->V2: Add some comments for hcall_assign_ptdev/hcall_deassign_ptdev.
Tracked-on: #1751
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires that the controlling expression of an if statement or
an iteration-statement shall be Boolean type.
v1 -> v2:
* update the U suffix of constant to let the type of operands
to bit operations (&) is the same.
* update the type of 'i' from uint64_t to uint16_t in
'profiling_set_control' since it is limited by phys_cpu_num,
which is uint16_t.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use pre-defined inline function for pci bus/slot/function calculation.
Tracked-on: #1747
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The old doc update commit changed the code by accident and broke
release version build. This patch fix the release build issue.
Tracked-On: #1595
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- Fix the integer violations related to the following rules:
1. The operands to shift operations (<<, >>) shall be unsigned
integers.
2. The operands to bit operations (&, |, ~) shall be unsigned
integers.
- Replace 12U with CPU_PAGE_SHIFT when it is address shift case.
v1 -> v2:
* use existed MACRO to get bus/slot/func values
* update PCI_SLOT MACRO to make it more straightforward
* remove the incorrect replacement of 12U with CPU_PAGE_SHIFT
dmar_fault_msi_write
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The print_param struct's member emit who is used for callback,
the forth parameter of it is used for transmit the private data
of the "print_param".
The type translation between "void *" and private date broke the
violations.
Use the same type to fix it out.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Xu Anthony <anthony.xu@intel.com>
Fixed the condition to be able to collect MSR sample data
Also populating addition information to help identifity appropriate data
Tracked-On: #1693
Signed-off-by: Manisha Chinthapally <manisha.chinthapally@intel.com>
For data structure types "struct vm", its name is identical
with variable name in the same scope. This is a MISRA C violation.
Naming convention rule:If the data structure type is used by multi
modules, its corresponding logic resource is exposed to external
components (such as SOS, UOS), and its name meaning is simplistic
(such as vcpu, vm), its name needs prefix "acrn_".
The following udpates are made:
struct vm *vm-->struct acrn_vm *vm
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
For data structure types "struct vcpu_arch", its name
shall follow Naming convention.
Naming convention rule:If the data structure type is
used by multi modules, its corresponding logic resource
is exposed to external components (such as SOS, UOS),
and its name meaning is simplistic (such as vcpu, vm),
its name needs prefix "acrn_". Variable name can be
shortened from its data structure type name.
The following udpates are made:
struct vcpu_arch arch_vcpu-->struct acrn_vcpu_arch arch
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
For data structure types "struct vcpu", its name is identical
with variable name in the same scope. This is a MISRA C violation.
Naming convention rule:If the data structure type is used by multi
modules, its corresponding logic resource is exposed to external
components (such as SOS, UOS), and its name meaning is simplistic
(such as vcpu, vm), its name needs prefix "acrn_".
The following udpates are made:
struct vcpu *vcpu-->struct acrn_vcpu *vcpu
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
This patch adds more comments to describe the structures and functions that are
public to the other components in the hypervisor. The comments are in
doxygen-style for document generation.
v2 -> v3:
* Reformat the flow in the doc for vhm_io_request.
v1 -> v2:
* Fix typos and inconsistencies in the comments.
* Wrap the text-based diagram in the doc for vhm_request in @verbatim
Tracked-On: #1595
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
This patch adds more comments to describe the structures and functions of vtd
that are public to the other components in the hypervisor. The comments are in
doxygen-style for document generation.
Tracked-On: #1595
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
This patch adds more comment to describe functions that are
interfaces to the other modules in the hypervisor. The comments
are in doxygen-style for document generation.
V1-->V2:
Rebase
Tracked-On: #1595
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
This patch adds comments to the main public functions
of vCPU in the hypervisor. The comments are in doxygen-style
for document generation.
Tracked-On: #1595
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
ACRN, in partition mode, supports LAPIC pass-thru to guests. Guest needs
to use x2APIC mode of LAPIC for pass-thru to be enabled.
ACRN also needs the user to configure lapic_pt to true in vm_desc
for the VM.
Interrupt Command Register (ICR) is the only APIC register that is
intercepted. Reference code in partition/vm_description.c enables
LAPIC pass-thru for vm2.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
This patch adds support for self-IPI virtualization when guest
uses vLAPIC in x2APIC mode.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
When guest switches from xAPIC mode to x2APIC mode of vLAPIC operation,
MSRs are used to access vLAPIC. This patch adds APICv support for
MSR accesses to vLAPIC. Switching from xAPIC to x2APIC is supported via
APIC BASE MSR. Other modifications like disabling and switching back to
xAPIC are not supported.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
This patch adds support to return APIC ID if guest uses vLAPIC
in x2APIC mode.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
This patch converts x2APIC MSR accesses to corresponding LAPIC MMIO offset to
utitlize vlapic_write/read APIs to virtualize LAPIC. Also adds support to inject
GP fault when read-only registers are attempted to be written to or vice versa.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
Accessing x2APIC MSRs in xAPIC mode should result in GP exception according
to SDM section 10.12.2. Adding support to ACRN to inject GP into guests for
the same reason.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
Replace dynamic memory allocation in memory management with static memory allocation.
Since the static memory allocation can guarantee the allocation never failed, so
split_large_page and construct_pgentry don't need to return a errno any more.
Besides, the destroy_ept don't need to free page any more. Instead, it would memset
the eptp to 0 to make sure we can't walk this paging table again.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Add static paging table allocation API for EPT.
Note: must configure SOS/UOS_REAM_SIZE exactly as the platform.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Add static paging table allocation API for hypervisor.
Note: must configure PLATFORM_RAM_SIZE and PLATFORM_MMIO_SIZE exactly as the platform.
Rename RAM_START/RAM_SIZE to HV_RAM_START/HV_RAM_SIZE for HV.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
It's possible that the up_count_spinlock is not release during
system enter S3. The case is like following:
BSP AP
stop_cpus cpu_dead
cpu_set_current_state
spinlock_abtain
up_count--
wait_for up_count == 1
enter S3
spinlock_release
Especially, considering the real spinlock release could be delayed
by cache.
Actually, the most content protected by up_count_spinlock is per
cpu data and could be changed without lock. Only left is up_count.
This patchset remove the up_count_spinlock and use atomic API
for up_count changing.
Tracked-On: #1691
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
on KBL-NUC when input "vmexit" in hypervisor console,
the console or HV/SOS could be hung, the root cause is:
the log buffer is overflow for 8 CPU cores info.
to resolve the issue:
1. increase the shell log buffer size according to the
physical CPU max number
2. check the snprintf return value, if no buffer left,
just return.
Tracked-On: #1587
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
After enabling vPCI in hypervisor for vm0, UOS may not able be launched
successfully. Consider this scenario (take MSI-X for example):
- DM makes hypercall to hypervisor to do MSI-X remapping on behalf of
UOS guests.
- After the hypercall, VHM module in SOS kernel updates the physical
MSI-X table with the physical Message Data/Addr.
- These MMIO write requests are intercepted by hypervisor, which will
call ptdev_msix_remap() to do MSI-S remapping.
It may fail due to 2 possible reasons:
1) wrong target VM because:
hypervisor thinks it's a VM0 MSI-X device but they have been registered
as UOS guests through HC_SET_PTDEV_INTR_INFO hypercall.
2) wrong ptdev_msi_info->vmsi_data because:
The virtual MSI-X table is supposed to hold virtual Message data/addr
but the SOS VHM writes the physical ones to it.
This patch resolves these problems by ignoring the HC_VM_PCI_MSIX_REMAP
hypercall, so virtual and physical Message Data are the same from SOS'
perspective and it won't mess up the virtual PCI device in HV.
Also in HC_SET_PTDEV_INTR_INFO handler, vpci updates the target VM
when the PCI devices are assigned to different VMs.
The UOS' MSI/MSI-X remapping is triggered by hypervisor when SOS (either
DM or VHM) updates the Message Data/Addr.
Tracked-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
If PBA or other data structures reside in the same BAR with MSI-X,
devicemodel could emulate them and make hypercall SET_MEMORY_REGION
to setup EPT for vm0.
Hypervisor can not intercept the whole range of this BAR, but only
the minimum 4KB pages that cover the MSI-X Table.
Tracked-On: #1568
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Fixed the following violations:
- Widening cast on complex integer expression
- Casting operation to a pointer
- Static procedure is not explicitly called in code analysed
Tracked-On: #1568
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
For SOS BSP, we reuse native saved cs.limit
For UOS BSP, we set cs.limit in DM
For AP, we use initialized data from realmode_init_regs.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
Save the native cs limit and reuse it for SOS cs limit. To remove
the hardcode of cs limit for guest in hypervisor.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
--Config LOG_BUF_SIZE 256KB for per cpu
--Replace 'calloc' with static array for sbuf
--Rename 'alloc_earlylog_sbuf' to 'init_earlylog_sbuf'
--Remove deadcode sbuf_free
v2-->v3:
-- put the buffer into per_cpu data structure
v1-->v2:
-- add 'is_early_logbuf' in percpu data structure used for
check if need to do 'do_copy_earlylog'
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- flush L1 cache before VM entry only on platform
affected by L1TF
- flush operation is configurable by below MACRO:
--CONFIG_L1D_FLUSH_VMENTRY_ENABLED
Tracked-On: #1672
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
- detect if current processor is affected by L1TF
- detect the presence of of "IA32_FLUSH_CMD(MSR 0x10B)
if processor is affected by L1TF.
Tracked-On: #1672
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
The operands to shift operations (<<, >>) shall be unsigned integers.
v1 -> v2:
* replace 12U with CPU_PAGE_SHIFT when it is address shift case.
* replace 6UL with 0x6UL
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace list of iommu_domains with static array
Tracked-On: #861
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Predefine a dmar_drhd_rt table for all possible dmar unit
Tracked-On: #861
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Below functions are deprecated, remove them from hypercall.h
hc_assert_irqline()/hc_deassert_irqline()/hc_pulse_irqline()
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Compared with partition_mode.c, the major difference between them is
the list of PCI devices is statically defined or dynamically
enumerated and allocated.
Tracked-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Similar to MSI emulation, this patch emulates the Message Control word
within MSI-X Capability Structure.
Also it emulates MSI-X table. MSI-X remapping is triggered when the guest
is changing the Mask bit in Vector Control, or the Message Data/Addr when
MSI-X Enable bit is set.
Tracked-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Emulate MSI Capability structure for vm0 in sharing mode:
- it intercepts the IO requests for MSI Capability structure, emulates
the Message Control word, and bypasses all other I/O requests to the
physical device.
- criteria to trigger MSI remapping: MSI Enable bit is being changed,
Message Data/Addr is being changed when MSI Enable is set.
Tracked-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Add 'struct vpci_ops *ops' to 'struct vpci' so we have clearer structure:
- struct vpci: include struct vpci_ops pointing to different callback
functions for partition or sharing mode repsectively.
- struct pci_vdev: includes struct pci_vdev_ops to handle different vpci
functionalities:
hostbridge emulation
passthrough device BAR emulation
msi/msi-x remapping
This patch moves the code around but doesn't change the underlying logic
in terms of PCI spec handling. More detailed implementation:
- create new file partition_mode.c to house the implementation of partition mode
regarding the vpci layer.
- vpci.c: only keeps the abstract code which calls vpci->ops to functions
in partition_mode.c, and potentially to sharing_mode.c.
- the following functions are moved to partition_mode.c and renamed with
partition_mode prefix.
- vpci_init() -> partition_mode_vpci_init()
- vpci_cleanup() -> partition_mode_vpci_deinit()
- pci_cfg_io_write() -> partition_mode_cfgread()
- pci_cfg_io_read() -> partition_mode_cfgwrite()
Track-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
commit 026ae83bd5 ("hv: include: fix 'Unused procedure parameter'")
removed the then unused parameter handler_private_data from
hv_mem_io_handler_t because MISRA-C requires that there should be no
unused parameters in functions.
This patch removes vcpu from the parameter list as well since this may
not be used by all users. Also it brings back handler_private_data which
is more flexible. For example, vioapic_mmio_access_handler() can use it
to pass vcpu pointer.
Tracked-On: #861
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- It starts from scaning bus 0 and scan other buses only if it is referred
as a Secondary Bus by a PCI-to-PCI bridge.
- Skip to next device if function 0 is not implemented.
- Don't enumerate function 1-7 if a device is not a multi-function device.
Tracked-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In order to allow these functions to be called without an associated
struct pci_pdev (for example, at the time of PCI bus enumeration), these
two functions can not take the struct vdev as input parameter.
Tracked-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- It makes more sense to return bool from pci_bar_access()
- other minor changes for cleanup
Tracked-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Don't have any logical changes.
- add more common PCI macros
- remove redundant definitions in dmar_parse.c
- move all the common mascos from vpci.h to pci.h
Tracked-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
--remove 'calloc' for pcpu, change it to static array
--rename 'init_percpu_data_area' to 'init_percpu_lapic_id'
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
--Removed MAX_PCPU_NUM in cpu.h
--Changed the default value from 128 to 8 for
MAX_PCPU_NUM
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
sbuf.h:
Added new shared buffer types for SEP and SOCWATCH
profiling.c
sbuf_next_ptr - returns address of next available buffer
profiling_sbuf_put_variable:
This function allows to write data of variable size into shared buffer.
profiling_generate_data:
Read profiling data and transfer to SOS
Drops transfer of profiling data if sbuf is full/insufficient and log it
Tracked-On: projectacrn#1409
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Chinthapally, Manisha <manisha.chinthapally@intel.com>
irq.c/.h:
Added new variables(ctx_rflags, ctx_rip, ctx_cs) in irq_desc
On each interrupt this information is populated
Added api's to access the irq_desc members
profiling.c:
profiling_pmi_handler:On each PMI generates gets the context and other information that caused it
Tracked-On: projectacrn#1409
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Chinthapally, Manisha <manisha.chinthapally@intel.com>
profiling_vmenter_handler:Saves vm information
profiling_vmexit_handler: Saves vm information and vm exit reason
Tracked-On: projectacrn#1409
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Chinthapally, Manisha <manisha.chinthapally@intel.com>
MSR operations are directly done based on physical cpu's
profiling_handle_msrops:
Per cpu function, performs the MSR operations (Read, Read clear,Write)
For SOCWATCH/ power tool, generates MSR samples.
profiling_msr_ops_all_cpus :
Receives required information for MSR operations from guest,
SMP calls profiling_handle_msrops,
Copies the information collected to guest
Tracked-On: projectacrn#1409
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Chinthapally, Manisha <manisha.chinthapally@intel.com>
profiling_set_control:
Receives tool control information from guest and sets control switches accordingly,
tool control information includes:
type - sep/socwatch
action - Start/stop
feature - What to collect(core/lbr/vm switch)
This function provides interface to start and stop profiling data collection
profiling_start_pmu:
Initialize sep state and enable PMU counters
SMP calls profiling_enable_pmu
profiling_stop_pmu:
Reset sep state and Disable all the PMU counters
SMP calls profiling_disable_pmu
profiling_enable_pmu:
Enable all the Performance Monitoring Control registers.
Unmask LAPIC entry for PMC register to enable performance monitoring
Walk through the entries and write to PMU control regiesters
profiling_disable_pmu:
Disable all Performance Monitoring Control registers
Tracked-On: projectacrn#1409
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Chinthapally, Manisha <manisha.chinthapally@intel.com>
This patch provides interface to configure(setup before actual
collection) PMI and VM switch tracing information.
profiling_config_pmi:
Receives required information for configuring PMI from guest,
populates the information info per_cpu region and SMP calls profiling_initilaize_pmi
profiling_initialize_pmi:
Configure the PMU's for sep/socwatch profiling.
Initial write of PMU registers.
Walk through the entries and write the value of the register accordingly.
profiling_config_vmsw:
Receives required information for configuring
VMswitch from guest, Configure for VM-switch data on all cpus
profiling_initialize_vmsw: initializes VMSwitch tracing
Tracked-On: projectacrn#1409
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Manisha <manisha.chinthapally@intel.com>
This patch includes support to following
1. Collection of physical cpuid information
2. Collection of List of VM's available and information
3. Tool version information
4. Sending tool control information to guest
Tracked-On: projectacrn#1409
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Chinthapally, Manisha <manisha.chinthapally@intel.com>
This patch adds support to sep/socwatch profiling
Adds 2 new files include/arch/x86/profiling.h and arch/x86/profiling.c
which contains most of the implementation for profiling,most of the functions
in profiling.c have dummy implementation and will be implemented in next patches
a. cpu.c, Initial profiling setup is done as part of bsp_boot_post
and cpu_secondary_post flow
b. vmcall.c, New ioctl is added for performing profiling related
operations in vmcall_vmexit_handler
ioctl - HC_PROFILING_OPS
function - hcall_profiling_ops()
c. common/hypercall.c, hcall_profiling_ops() implementation.
d. hv_main.c, In vcpu_thread calling profiling related functions
to save vm context
e. acrn_hv_defs.h, list all the profiling command types
Tracked-On: projectacrn#1409
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Chinthapally, Manisha <manisha.chinthapally@intel.com>
Fix violations whose parameter can be read-only.
This patch only fix the parameter whose name is vcpu.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Fix violations for function whose parameter can be read-only.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
bitmap_test parameter addr should be read-only,
the addr is in the asm code "output" region,
change it to the "input" region.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
All the platforms supported by ACRN supports x2APIC. So enabled
x2APIC for ACRN hv. Removed any code that is needed for xAPIC mode
of operation.
Tracked-On: #1455
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed by: Yonghua Huang <yonghua.huang@intel.com>
The commit id "c5f4c5" translats from enum to macro, the content
is not correct,fixed now.
Tracked-On: #1553
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Zhi Jin <zhi.jin@intel.com>
- move the functions to access physical PCI configuration space from
pci_pt.c to the new file dm/hw/pci.c, so they can be accessed in
sharing mode as well. The new folder dm/hw is created in order to
move APIs talking to physical PCI devices out of dm/vpci.
- move the common vpci code from header file pci_priv.h to core.c.
- move file include/dm/vpci/vpci.h one level up. It seems the folder
include/dm/vpci is not necessary.
- This patch only moves code around, and doesn't make any logical
changes. Besides removes the static keyword from pci_pdev_read_cfg()
and pci_pdev_write_cfg()
Tracked-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- move most of the content of pci_priv.h to include/dm/pci.h.
This allows other code outside dm/vpci to be able to share these macros.
- code cleanup: fix alignments etc.
Tracked-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There's no need to walk these paging tables to transfer HPA to GPA
for a VM, so remove it.
Tracked-On: #1124
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
They're: (a) only SOS would use hpa2gpa and (b) the GPA and HPA
in SOS is identical mapping.
Rename hpa2gpa to vm0_hpa2gpa then.
Tracked-On: #1124
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Pointer param should be declared pointer to const if
the parameter is keeped read-only.
This patch changes pointer param whose name is vm.
Tracked-On:#861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
irq 4 is sharing with idma, after change vuart to level trigger, the idma
driver could handle this irq 4 and send out EOI, which cause the irq storm.
move vuart irq to a not used 6.
Tracked-On: https://github.com/projectacrn/acrn-hypervisor/issues/1476
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
-- Not return NULL for vcpu_from_vid
We have replaced dynamic memory with static memory for vcpu,
then if vcpu_id is valid, this API should not return NULL.
-- Simplify the for-loop when walk through the vcpu
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The base address of LAPIC and IOAPIC should be parsed from MADT table,
so move the definition to platform_acpi_info.h.
Tracked-On: #1500
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The I/O APIC number should be parsed from host ACPI table, so move the
definition from Kconfig to platform_acpi_info.h.
Tracked-On: #1500
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace platform_acpi_info.c with platform_acpi_info.h and define needed
host ACPI info in MACROs. Then the struct host_acpi_info is not needed
any more.
This header file should be generated by offline tool automatically;
Tracked-On: #1500
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ABL pass seed_lists to HV through different interface/structures.
So, in this patch, add interface to retrieve seed from ABL and refactor
the seed parsing logic.
Tracked-On: #1488
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
All the platforms supported by ACRN supports x2APIC. So enabled
x2APIC for ACRN hv. Removed any code that is needed for xAPIC mode
of operation.
Tracked-On: #1455
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed by: Yonghua Huang <yonghua.huang@intel.com>
MISRA-C required the suffix(U/UL), such as:
(1) ---> (1U)
(1) ---> (1UL)
(1U << 0) ---> (1U << 0U)
This patch will add the suffix(U/UL) to come up MISRA-C into
hypervisor/include directory.
Tracked-On: #1468
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
to enable APICv Posted interrupt supported, following the
specifications defined in Intel SDM Section #29.6, Volume3.
Posted-interrupt processing is a feature by which a processor
processes the virtual interrupts by recording them as pending
on the virtual-APIC page.
Injecting interrupts to VCPU from remote CPU without causing
VM exit on the destination, following steps in SDM Section 29.6,volume3:
Tracked-On: #1447
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
use pin_state[pin] to record vpic pin signal, and change the interface name
accordingly.
Tracked-On: #1269
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Now we have name reuse definitions in hypervisor as following:
"enum cpu_state cpu_state" in per_cpu.h,
"struct shell_cmd *shell_cmd" in shell_priv.h.
MISRAC requires that tag names shall not be reused anywhere
with in a program.So these definitions violate MISRAC rules
"identifier resue".This patch is used to fix it.
1. modify the definitions to "enum pcpu_boot_state boot_state"
and "struct shell_cmd *cmds".
2. modifty the relevant usage.
v1->v2
update commit message to be more explicit.
v2->v3
update the enum definition.
Tracked-On: #861
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, UOS will use hypercall to init BSP state, we could remove
set_bsp_real_mode_entry() and set_bsp_protect_mode_regs().
For SOS, GDT will inherit from SBL or UEFI. For UOS, DM will
prepare GDT. We don't need hypervisor to prepare GDT for guest.
The entry_addr of vcpu struct could be removed. The guest entry
is set through BSP rip register.
GUEST_CFG_OFFSET is not needed any more after this patchset.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, we make UOS to set BSP init state by using hypercall. We
could drop the old UOS loader in HV and make vm loader in HV
only for SOS.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
DM will use this hypercall to initialize the UOS BSP state.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The vcpu state is initialized outside of init_guest_state:
- SOS BSP state is initialized in SOS loader
- UOS BSP state is initialized in UOS loader
- AP state is initialized during SIPI signal emulation
We could make init_guest_state only update the vcpu state
to VMCS structure.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
NOTE: this patch is only workaround patch for UOS BSP state init.
Eventually, the DM will call hypercall to init UOS BSP state.
We use this workaround patch here to simplify the init_guest_state.
Will make the caller of init_guest_state calls init_guest_vmx
directly.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With reset_vcpu_regs as pre-condition, we only need to set
cs_selector and cs_base for AP.
We call set_ap_entry in two places:
1. When emulation AP SIPI
2. When sos BSP resume from S3. The BSP is resumed to real
mode with entry set to wakeup_vec. We call set_ap_entry
API here with entry twisted from wakeup_vec.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This reset_vcpu_regs function will reset the vcpu registers to
default value: realmode with entry 0xFFFFFFF0
Make call to reset_vcpu_regs during create_vcpu and reset_vcpu
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If defined CONFIG_VM0_DESC, HV will use predefined vm0_desc
to config VM0,now it is unneccessary, then remove these code.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- add missing brackets for 'if/else' statements based on MISRA-C
requirements
v1 -> v2:
* add brackets for each conditions in 'if' statements to improve
the readability
* modify 'ptdev_init' to make the logic clearer
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
In the current hypervisor design, when HPA is not
found for the specified gpa by calling gpa2hpa or
local_gpa2hpa, 0 will be returned as a error code,
but 0 may be a valid HPA for vm0; error checking
is missed when invoking gpa2hpa or local_gpa2hpa;
when invoking lookup_address, the caller guarantees
that parameter pointer pml4_page and pointer pg_size
is not NULL.
If local_gpa2hpa/gpa2hpa returns a invalid HPA,
it means that this function fails to find the
HPA of the specified gpa of vm. If local_gpa2hpa/gpa2hpa
return value is a valid HPA, it means that this
function have found the HPA of the specified gpa of vm.
Each valid vm's EPTP is initialized during vm creating,
vm's EPTP is valid until this vm is destroyed. So the caller
can guarantee parameter pointer pml4_page is not NULL.
The caller uses a temporary variable to store page size.
So the caller can guarantee parameter pointer pg_size
is not NULL.
In this patch, define a invalid HPA for gpa2hpa and
local_gpa2hpa;add some error checking when invoking
local_gpa2hpa/gpa2hpa;add precondition for lookup_address
function and remove redundant error checking.
V1-->V2:
Define INVALID_HPA as a invalid HPA for gpa2hpa
and local_gpa2hpa;
Updated related error checking when invoking
gpa2hpa or local_gpa2hpa;
V2-->V3:
Add some debug information if specified gpa2hpa
mapping doesn't exit and ept_mr_del is called;
Update INVALID_HPA definition easier to be reviewed.
V3-->V4:
Add vm->id and gpa into pr_error;
Add precondition to ept_mr_del to cover [gpa,gpa+size)
unmapping case.
V4-->V5:
Update comments;
Update pr_error message.
Tracked-On: #1258
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Because of the return type inconsistent,change the
sbuf return type to uint32_t to fix it,and make the
pre-condition to check the parameter whether is NULL.
V1->V2:
1.add () to bool expression
2.add pre-assumption to sbuf_get and sbuf_put
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1.Function return type inconsistent
2.cast on a constant value
V1->V2 add () to return type
V2->V3 keep the sbuf_get and sbuf_put return code
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Page table operation would not fault except:
1. the hypervisor it out of memory to allcate a page for page table operation
2. there is a bug with page table operation in hypervisor or devicemodle
While we assue that these would not happened in our platform when release, so
there is no need to check whether there is a fault with page table operation. However,
for debug version, we would panic the hypervisor if we can't meet the conditions really.
Tracked-On: #1124
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
add is_long_mode to check whether the processor is operating in IA-32e mode
add is_paging_enabled to check whether paging is enabled
add is_pae to check whether physical address extension is enabled.
Tracked-On: #1379
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Loop the global vm_array[] instead of the vm_list.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch is ready for next one,we will switch from
pointer to embedded structures such as structure vcpu,
some const qualifiers can be improper and raise compilation errors,
this patch remove const qualifier for struct vm.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C required the suffix(U), such as:
(1U << 0) ---> (1U << 0U)
This patch will add the suffix(U) to come up MISRA-C.
Tracked-On: #1385
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
add active_polarity to decide what signal to call: GSI_SET_LOW, GSI_SET_HIGH,
GSI_FALLING_PULSE or GSI_RAISING_PULSE.
Tracked-On: #1269
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
a guest may use per-cpu vector allocation mechanism which may lead to
same vector on different vcpu for different vioapic pins.
when we broadcast EOI from vlapic to vioapic, it could trigger
ptdev_intx_ack for incorrect vioapic pin which will lead to incorrect
vioapic irq deassert.
old implementation is recording assert & deassert by acnt, like:
- assert -> acnt++
- deassert -> acnt--
which means an incorrect deassert may descrease acnt from 0 to -1, it leads
to error.
this patch change the recording method for a pin assert/deassert, it
just use pin_state bit set/clear to indicate line state:
- high -> pin_state bitmap set
- low -> pin_state bitmap clear
and the irq assert will be triggered based on polarity setting during line
state changing.
it can avoid the failure of incorrect deassert on old implementation, and for
ptdev sharing irq, the dev hardware could re-trigger interrupt after deassert.
but for emulated device, there is no mechanism to re-trigger interrupt if
there is irq sharing - for DM, we already has constraint to restrict vGSI
sharing, so there is no problem of it.
Tracked-On: #1269
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
There are chances that names with leading underscore declared by
developers are conflict with the ones reserved for the compiler.
What this patch does:
- rename these functions/variables/macros starting with
underscore to avoid such unintentational mistakes.
- remove gpr.h without any contents
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The patch is replace irq_static_mappings type from 2 dimension array
into structure and one dimension array.
Tracked-On: #1375
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Jason Chen <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move struct acrn_vcpu_regs, acrn_descriptor_ptr and
acrn_gp_regs to acrn_common.h. The struct acrn_vcpu_regs
will be used as parameter of hypercall
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Doxygen API comment added to hypercall.h was incorrect causing the doc
build process to fail with a warning (parameter not documented).
Fixes: #1353
Tracked-On: #1353
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
For SBL platform, struct acrn_vcpu_regs are used as boot context.
Now the boot_ctx is only for UEFI platform. Rename struct boot_ctx
to efi_context.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Add struct acrn_vcpu_regs and make struct boot_ctx based on
struct acrn_vcpu_regs.
vm0_boot_context is also changed from struct boot_ctx to struct
acrn_vcpu_regs.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
We will define the hypercall to set acrn vcpu registers and
move this struct to acrn_commmon.h for reference from hypercall
parameter definition.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
The printf related functions have been called by other various
functions, e.g. get_ptdev_info(), get_ioapic_info, etc. The patch
is used to clear up the usage.
Tracked-On: #861
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Timer IRQ was static mapped IRQ.
It should not be cleaned up when one of the cpu dead.
The patch will retain the timer irq.
Tracked-On: #1359
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace dynamic allocation for vuart rx/tx buffer
with static array.
v2-->v3:
-- Reduce the size of vuart tx buffer from 64K to 8K
-- For non-partition mode, will use global rx/tx buffer,
for partition mode, will use per VM rx/tx buffer.
-- Change several APIs to inline
v1-->v2:
-- Move vuart rx/tx buffer into acrn_vuart data structure
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In hypervisor, all the parameter and return value printf related are
unsigned int, this patch is used to fix the function definitions.
v1->v2:
*Modify the return value of various functions, such as printf(),
vprintf(), charout(), do_printf(), charmem, print_pow2(),
print_decimal to void due to never used, no necessary to use,
or has already returned by param.
*Delete the impossible judgement of param->emit due to the type
is unsigned.
Tracked-On: #861
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- replace vpic/vioapic_xassert_irq() APIs
with vpic/vioapic_set_irq()
- unify the description of IRQ/PIN state in vpic. & vioapic.c
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fixes the following issue pointed by Xiangyang and Junjie.
There are some macro arguments acting as formal parameter names.
Drop such arguments since they make no difference to the expanded
implementation and they might confuse some developers.
Here is an example.
'ptr' is dropped in this patch, which is acting as a formal parameter
name and make no difference to the expanded implementation.
-#define build_atomic_load(name, size, type, ptr) \
+#define build_atomic_load(name, size, type) \
static inline type name(const volatile type *ptr) \
{ \
type ret; \
asm volatile("mov" size " %1,%0" \
: "=r" (ret) \
: "m" (*ptr) \
: "cc", "memory"); \
return ret; \
}
Some minor coding style fixes are also included in this patch.
- use TAB for the alignment rather than mixing TAB with space
- fix some typo in the comments
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
merge hv_lib.h and hypervisor.h into one file
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fixes the typo introduced in atomic operaions refine.
The usage of the parameter in function body was not updated according
to the changes of input parameter.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
MISRA-C requires that there should be no unused parameters in
functions.
This patch removes the unused parameters that is not being used
unconditionally.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix a Doxygen comment in the hypercall.h header file which is
missing the name of the parameter, this is causing warnings when
generating the documentation related to the
hcall_set_callback_vector() hypercall.
Tracked-On: #1335
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Currently the acrn-hypervisor is using the PLATFORM_IPI vector to notify
the sos_kernel. And then sos_kernel will handle the notification from acrn
hypervisor in PLATFORM_IPI ISR. But as the PLATFORM_IPI ISR can be registered
by the other modules, it will have the conflict when trying to register
acrn intr ISR. So the HYPERVISOR_CALLBACK_VECTOR will be used instead.
In order to switch the notification vector from PLATFORM_IPI to
HYPERVISOR_CALLBACK_VECTOR, one API is added so that sos can configure
the up-notifier interrrupt vector.
Tracked-On: https://github.com/projectacrn/acrn-hypervisor/issues/1325
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It is from the HYPERVISOR_CALLBACK_VECTOR in sos_kernel.
After this vector is used in both kernel and hypervisor, this will be defined
as the default vector.
Tracked-On: https://github.com/projectacrn/acrn-hypervisor/issues/1325
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This is to do the preparation of switch the notifier vector from
PLATFORM_IPI to HYPERVISOR_CALLBACK_VECTOR.
Currently the acrn-hypervisor is using the PLATFORM_IPI vector to notify
the sos_kernel. And then sos_kernel will handle the notification from acrn
hypervisor in PLATFORM_IPI ISR. But as the PLATFORM_IPI ISR can be registered
by the other modules, it will have the conflict when trying to register
acrn intr ISR. So the HYPERVISOR_CALLBACK_VECTOR will be used instead.
Tracked-On: https://github.com/projectacrn/acrn-hypervisor/issues/1325
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires that there should be no unused parameters in
functions.
In some cases, we will keep the unused parameters.
vmexit handler is one example. It is used as function pointer.
Some of the vmexit handlers use the input parameter 'vcpu', some of
them don't. We still need to keep the unused parameters 'vcpu' for
those handlers don't use 'vcpu'.
This patch removes the unused parameters that is not being used
unconditionally.
v1 -> v2:
* remove the non-implemented API 'vlapic_id_write_handler'
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C states that redundant code reduce the maintainability of code.
In some cases, we would like to keep the current unused static functions
for code completeness, such as checking register info. These functions
might be used later.
This patch removes the unused static function 'mmu_pt_for_pde'.
Looks like it is legacy code and not being used in our project.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Convert GSI_MASK_IRQ and GSI_UNMASK_IRQ to inline functions.
v1 -> v2:
After changing GSI_MASK_IRQ and GSI_UNMASK_IRQ from MACROs to functions,
'gsi_(mask|unmask)_irq' are the exposed APIs and 'irq_gsi_mask_unmask'
becomes internal.
In order to reflect this change,
- change 'irq_gsi_mask_unmask' as internal function in ioapic.c
- declare 'gsi_(mask|unmask)_irq' in ioapic.h
- define 'gsi_(mask|unmask)_irq' in ioapic.c
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
The hypercall can be used by SOS/DM to monitor UOS
pass-thru devices' interrupt data; and if an "interrupt
storm" happens in UOS, it can be used to delay the UOS
PTdev interrupt's injection for sometime.
The two functions are implemented by one hypercall with
two sub-commands, and with the data/params in the buffer.
Tracked-On: #866
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch is to enhance the feature of "interrupt storm
mitigation"; when interrupt storm happens on one UOS
it should keep as smaller effect to SOS as possible.
Add variables in PTdev entry & VM, used to record one
UOS's pass-thru devices' interrupt data; add a function
to collect the data.
Also add a timer used to delay UOS pass-thru devices'
interrupt injection if an "interrupt storm" detected
by SOS.
Tracked-On: #866
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- use sizeof(struct lapic_regs),instead of arbitrary size
to lear 'apic_page' memory region in vlapic.c
- fix potential buffer overflow issues in vpic.c & ioapic.c
Tracked-On: #1252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRAC has requirement about implict conversion: actual to formal
param. This patch is used to fix part of these violations.
1.Add a new structure seg_desc_vmcs to hold the VMCS field address of
segment selector to clean up seg_desc structure.
2.Add the definition of maximum MSI entry and the relevant judgement.
3.The violations in shell.c, logmsg.c will be fixed in other series of
patches with modification of function snprintf(), vsnprintf() and other
related usages.
v1->v2:
*Move the definition of struct seg_desc_vmcs from instr_emul.h to
instr_emul.c.
*Modify the formal parameter type in function definition from uint8_t
to char instead of using cast.
*Drop the const declaration for char data in formal parameter.
v2->v3:
*update the data missing conversion.
*change type of internal parameter len to avoid casting in npklog.c.
*change the conversion from signed char to unsigned int in
uart16550_getc() to solve sign-extension.
Tracked-On: #861
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C states that redundant macros reduce the maintainability of code.
In some cases, we would like to keep the current unused macros for code
completeness, such as cpu registers. These macros might be used later.
This patch removes some unused macros that is not critical for code
completeness.
v1 -> v2:
* Keep TRUSTY_VERSION in trusty.c.
Yadong will cook another patch which will utilize TRUSTY_VERSION.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the current hypervisor hypercall, first all vcpu is
allocated to SOS, vcpu's vm field is initialized to vm0.
When the vcpu is offlined, vcpu will be paused and vcpu's
vm field is set as NULL by DM. When UOS is created, vcpu's
vm field is set as UOS's vm. So when vmcall_vmexit_handler
is invoked, vcpu's vm filed is always non-NULL.
error checking for vm pointer is done in the function
"vmcall_vmexit_handler", vmcall_vmexit_handler will
guarantee that vm is vm0.
So all hypercall functions (these functions is just for handler
hypercall, except vmcall_vmexit_handler) don't need to check
whether invoking vm is NULL and don't need to check whether
invoking vm is vm0 or not.
Remove related invoking vm error checking for hypercall handling.
V1 --> V2:
Add pre-condition for hypercall in the head file.
V2 --> V3:
Add pre-condition for copy_from_gpa and copy_to_gpa.
V3 --> V4:
Add pre-condition both in the head file and source file.
Tracked-On:#1258
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Delete the dead code get_irq_info(), local_get_irq_info() in io_request.c
and definition in guest.h.
v1->v2
*the dead code used pointers which not checked before use, therefore it
causes "pointer not checked for null before use". To make it clearly,
modify the subject to "delete the dead code" directly.
*remove dead code local_get_irq_info() in io_request.c and definition
in guest.h together.
Tracked-On: #861
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- move the contents in macros.h and stdarg.h to util.h
- remove macros.h and stdarg.h
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRAC has requirements about literal value requires a U suffix and
signed/unsigned conversion with cast. This patch is used to solve
these violations.
v1->v2
*Drop the cast of sz from uint32_t to int32_t, the signed/unsigned
violation of nchars will be solved by other patch together with
printf/sprintf/console/vuart/uart code.
*Delete the unnecessary L suffix of shifting operand.
Tracked-On: #861
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Reviewed by: Junjie Mao <junjie.mao@intel.com>
According to SDM 4.6 Access Rights definition, if SMAP/SMEP
is enabled, more conditions are used to decide the access rights
like SMAP/SMEP, EFLAGS.AC, R/W bit in every paging-structure entry
for page walking.
This patch add the check to guest page walking function and inject
page fault accordingly.
Tracked-On: #1207
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- replace the usage of mdelay with udelay
- remove lib/mdelay.c
- rename udelay.c to misc.c
future other small APIs could put in misc.c
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- update 'vlapic' in 'struct vcpu_arch' from pointer
to instance
-- add inline function(vcpu_vlapic) in vcpu.h
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It has been defined in 'struct vcpu_arch'
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move structure vlapic_pir_desc/vlapic_timer/
acrn_vlapic from vlapic_priv.h to vlapic.h
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace pointer with static memory for msr_bitmap
inside structure vm_arch.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace vmcs pointer with static memory for vmcs region
inside structure vcpu_arch.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- convert function like macros to inline functions based on MISRA-C
requirement
- remove some unused and duplicated macros
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
for each pass-thru device and its entry owned by one VM, so
change the pass-thru device's softirq lock & entry list into
per VM, so one VM's PT device interrupt process will not
interfere with other VMs; especially in case one user OS
"interrupt storm" happens, it will have little effect on
service OS.
Tracked-On: #866
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Change vmx_off/exec_vmxon/exec_vmclear/exec_vmptrld/
exec_vmxon_instr/init_vmcs to void type
-- for vmxon/vmclear/vmptrld, add pre-conditions to
guarantee sucessful execution.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Check if the VMX capability is locked with incorrect value,
at the time when HV do the hardware capability detect.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove vmxon_region_pa from structure per_cpu_region,
and define vmxon_region inside per_cpu_region.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add the brackets for Macro parameter to avoid the unintentional
mistakes.
A simple example that may cause mistakes:
#define minus(x) -x
When the following call is made,
z = minus(a-b)
it becomes:
z = -a-b;
where "-a - b" is equivalent to "(-a) - b" rather than "- (a - b)", as
expected.
v2 -> v3:
* convert DMAR_WAIT_COMPLETION to inline function
* remove the macro PIC_PIN_FOREACH and implement the well-formed
for loop in each case
* replace __CPP_STRING with STRINGIFY and remove the unused CPP_STRING
v1 -> v2:
* Remove some changes to function like macro since MISRA-C requires to
use inline functions if it is possible.
These MACRO brackets violations will be fixed together when fixing
other issues related to function like macro.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
MISRA-C requires that each function defined and declared shall be called
or referenced in code analyzed.
In some cases, we would like to keep the non-called functions for code
completeness, such as
vcpu_inject_extint/vcpu_inject_nmi/vcpu_inject_gp/vcpu_inject_pf
/vcpu_inject_ud/vcpu_inject_ac/vcpu_inject_ss.
This pacth removes some functions that are independent and are not
called in our code base.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires that each parameter in the MACRO shall be in brackets.
In some cases, adding brackets for all of the parameters may not be a
perfect solution.
For example, it may affect the code readability when there are many
parameters used in the MACRO.
And duplicated brackets will appear when one MACRO called another MACRO
which is using same parameters.
This patch convert some MACROs to inline functions to avoid such cases.
v1 -> v2:
* Remove the unnecessary changes in hypervisor/bsp/uefi/efi/boot.h
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
- Converted MACROS to functions
- Defined pci_bar_type enum
- Defined pci_bdf as union instead of uint16_t to eliminate macros
- Use L or UL postfix after unsigned integers
Tracked-On: #1126
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
MISRA-C requires that the controlling expression of an if statement or
an iteration-statement shall be Boolean type.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
We don't need find_next_table to walk to the next EPT page table.
Tracked-On: #1124
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Add 1GB large page support limit on our platform.
Tracked-On: #1124
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since vmexit handling in ACRN partition mode is not complex (since no SOS and
all devices passthru), interrupts can stay disabled in root mode during
vmexit handling.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Change guest_msrs in vcpu data structure from pointer to array, which
could avoid the dynamic memory allocation.
v1 -> v2:
* Remove the unnecessary initialization for guest_msrs[] since vcpu is
allocated by calloc.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
-- rename struct vioapic --> struct acrn_vioapic
-- update 'vioapic' field in 'struct arch_vm' from pointer
to instance
-- change vm_ioapic(vm) to inline, and move it to vm.h
-- change vioapic_init to void type
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- update 'vuart' field in 'struct vm' from pointer
to instance
-- replace MACRO with inline function for vm_vuart,
and move it to vm.h
-- change vuart_init to void type
-- rename struct vuart -->struct acrn_vuart
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- update 'vpic' field in 'struct vm' from pointer
to instance, and move it from 'struct vm' to 'struct arch_vm'
-- replace MACRO with inline function for vm_pic, and move it
to vm.h
-- changed vpic_init to void type
-- removed vpic_cleanup
-- move struct acrn_vpic/i8259_reg_state from vpic.c to vpic.h
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the gdt.h, it defines unions and parameters which is not used
in hypervisor. Removed them to keep the gdt definition simple.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- by default, ACRN will not support platform without
below APICv features:
-- Use TPR shadow
-- APIC-register virtualization
- remove mmio emualtion of local APIC for guest
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In current code, the address translation type for passthrough devices
in SOS is passthrough type, which means the device in SOS can access
the whole physcial memory.
This patch uses SOS EPT to translate address for passthrough
devices. So that the memory of VMM or trusty can be protected from
SOS PTDev.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The virt_vector/phys_vector are only used for debugging.
Rename msix to is_msix.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Then use the source id to lookup the ptdev remapping entry.
For msi interrupt ptdev: use bdf and vector_index to identify the id;
For intx interrupt ptdev: use pin and pin source to identify the id.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The npk_log is a log destination for the hypervisor, similar to the
console_log and the mem_log. It can be enabled/disabled/configured
by the SOS kernel via the hypercall HC_SETUP_HV_NPK_LOG.
The configuration includes:
1. Set the MMIO base address of the reserved NPK master.
2. Set the log level of the hypervisor NPK log.
After that, the npk_log can be enabled to write the hypervisor logs to
the MMIO address of the reserved NPK master with a simple header.
Signed-off-by: Zhi Jin <zhi.jin@intel.com>
Signed-off-by: Liu, Xiaojing <xiaojing.liu@intel.com>
Reviewed-by: CHEN Gang <gang.c.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The hypercall HC_SETUP_HV_NPK_LOG is added to enable/disable/configure
the hypervisor NPK log.
Signed-off-by: Zhi Jin <zhi.jin@intel.com>
Signed-off-by: Zhonghua Sun <zhonghua.sun@intel.com>
Reviewed-by: CHEN Gang <gang.c.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The apicv is one hardware acceleration feature of vlapic. All vlapic
APIs should keep vlapic_ as the prefix.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since these APIs always return 0,
change them to void type,
vcpu_set_cr0()
vmx_write_cr0()
vcpu_set_cr4()
vmx_write_cr4()
kick_notification()
tsc_deadline_handler()
dmar_fault_handler()
ptdev_interrupt_handler()
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
- Clean up some code regarding to % and / operations since bit
operations are faster.
x % 64U ---> x & 0x3fU
x % 32U ---> x & 0x1fU
x % 16U ---> x & 0xfU
x % 8U ---> x & 0x7U
x % 4U ---> x & 0x3U
x % 2U ---> x & 0x1U
x / 64U ---> x >> 6U
x / 32U ---> x >> 5U
x / 16U ---> x >> 4U
x / 8U ---> x >> 3U
x / 4U ---> x >> 2U
x / 2U ---> x >> 1U
- Minor changes regarding to coding styles
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This commit replaces the "used" field of irq_desc with a bitmap to maintain
the irq use status to save memory and LOC, and improve the efficiency as well.
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- update 'apic_page' field in 'struct acrn_vlapic',
from pointer type to 'struct lapic_regs' type.
- delete 'pir' and update 'pir_desc' to 'vlapic_pir_desc'
type.
- fix potential memory leak in 'vlapic_create()'
should free allocated memory in case of registering
mmio handler failure.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
MISRAC requires that the array size should be declared explicitly.
This patch fixes the issues caused by vm0_boot_context.
Fix pattern is like below:
extern char start_of_ROM, end_of_ROM, start_of_FLASH;
memcpy (& start_of_FLASH, & start_of_ROM, & end_of_ROM - &
start_of_ROM);
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Use func(void) rather than func() for the function declaration and
definition based on MISRAC requirement.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Fix the parameter type mismatch between API declaration and definition.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
-- change send_start_ipi/do_copy_earlylog to void type
-- drop the return value for vcpu_queue_execption
when inject GP/PF/UD/AC/SS
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
ACRN in partition mode provides vUART for all VMs. This patch adds
support to add console redirection for multiple VMs.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
-- change two timer callbacks to void type
-- ignore the return value for add_timer
-- add (void) before several functions(memset/memcpy/
vcpu_get_xxx)
v1-->v2:
ignore the return value for add_timer
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
for secure and normal world has different EPTP, in secure world,
it could trap to hypervisor and call gpa2hpa function. So it need
check if it is in normal or secure world for EPTP selection.
Detailed explanation from Yadong Qi <yadong.qi@intel.com>:
Currently, trusty OS does not handle interrupt, so when an interrupt
is delivering in trusty, trusty will set it to LAPIC IRR register by
inject self_ipi() and then call world_switch to switch to Android,
So android will receive/handle the interrupt properly.Since the
vLAPIC is enabled in ACRN, so when trusty try to inject self_ipi(),
APIC-ACCESS vmexit will happen. Then ACRN will do instruction
decode/emulation, so the GPA2HPA will fail since page walk is using
nworld_eptp. It is probability an issue.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This commit changes the order of functions in arch/x86/irq.c, and internal
function names to make it looks cleaner, with no change within any function.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
There are several similar irq handlers with confusing function names and it's
not friendly to call update_irq_handler() to update a proper handler after
request_irq().
With this commit, a single generic irq handler is being used, in which, no lock
need to be acquired because our design could guarantee there is no concurrent
irq handling and irq handler request/free.
A flags field is added to irq_desc struct to select the proper processing flow
for an irq. Irqflags is defined as follows:
IRQF_NONE (0U)
IRQF_LEVEL (1U << 1U) /* 1: level trigger; 0: edge trigger */
IRQF_PT (1U << 2U) /* 1: for passthrough dev */
Because we have only one irq handler, update_irq_handler() should be replace by
set_irq_trigger_mode(), whichs set trigger mode flag of a certian irq.
Accordingly, the code where called update_irq_handler() need to be updated.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This commit refactors vector allocation/free codes, two functions are
defined to help alloc/free vectors for an irq:
- uint32_t alloc_irq_vector(uint32_t irq)
- alloc a free vector (0x20 ~ 0xDF), and bind it to irq, for legacy irqs
and static mapped irqs, vector has been allocated and bind, so just
check the mapping correctness;
- return: valid vector on success, VECTOR_INVALID on failure.
- void free_irq_vector(uint32_t irq)
- free vector allocated via alloc_irq_vector(), for legacy irqs and static
mapped irqs, nothing need to do.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This commit refactors the alloc/free irq num, two functions are defined:
- uint32_t alloc_irq_num(uint32_t irq)
- if irq is valid, mark the irq_desc as used; if it's IRQ_INVALID,
alloc a free irq, or else do nothing;
- return: irq num on success, or IRQ_INVALID on failure.
- void free_irq_num(uint32_t irq)
- free the irq num allocated via alloc_irq_num();
And a global spinlock to protect it from concurrent allocation/free.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This commit cleans up fiels of struct irq_desc:
- remove name, irq_desc_state, irq_cnt and irq_lost_cnt which are not used.
- remove irq_ prefix of irq_lock field of struct irq_desc;
- change enum irq_state to enum irq_use_state;
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Li, Fei <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- Fix the data type violations based on MISRA-C requirements
- Add '-fsigned-char' in Makefile to let the compiler treats 'char' be
signed, like 'signed char'.
Otherwise, the static checker treats 'char', 'signed char' and 'unsigned
char' as three different types.
- Fix some minor coding style issues, such as TAB issues, line over 80
characters issues and comments style
v1 -> v2:
* fix the violation regarding to 'fifo_getchar'
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
V1:
In order to better comply with MISRA C,
add const qualifiers whereeven required.
In the patch, these are being added to pointers
which are normally used in "get" functions.
V2: Corrected the issues in the patch
pointed by Junjie in his review comments.
Moved the const qualifiers to the correct
places. Removed some changes which are not
needed.
V3: Updated patch comment.
This modifies a subset of all the functions
which might need constant qualifiers
for the their parameters.
This is not and exhaustive patch. This only
targets obvious places where we can use
the const qualifier. More changes will be
submitted in future patches, if required.
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
This patch adds code to support read-only RTC support for guests
run by partition mode ACRN. It supports RW for CMOS address port 0x70
and RO for CMOS data port 0x71. Reads to CMOS RAM offsets are fetched
by reading CMOS h/w directly and writes to CMOS offsets are discarded.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
MISRA-C requires that shift operation cannot exceed the word length.
What this patch does:
- Fix the bug in 'vuart_init'
The register 'dll' and 'dlh' should be uint8_t rather than char.
'dll' is the lower 8-bit of divisor.
'dlh' is the higher 8-bit of divisor.
So, the shift value should be 8U rather than 16U.
- Fix other data type issues regarding to the registers in 'struct
vuart'
The registers should be unsigned variables.
v1 -> v2:
* Use a local variable 'uint8_t value_u8 = (uint8_t)value' to avoid
mutiple times type conversion
* Use '(uint8_t)divisor' rather than '(uint8_t)(divisor & 0xFFU)' to
get the lower 8 bit of 'divisor'
Direct type conversion is safe and simple per Xiangyang's suggestion.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
-- Change these APIs to void type, add pre-conditions,
and move parameter-check to upper-layer functions.
handle_vpic_irqline
vpic_set_irqstate
vpic_assert_irq
vpic_deassert_irq
vpic_pulse_irq
vpic_get_irq_trigger
handle_vioapic_irqline
vioapic_assert_irq
vioapic_deassert_irq
vioapic_pulse_irq
-- Remove dead code
vpic_set_irq_trigger
v1-->v2:
add cleanup vpic
change some APIs to void type, add pre-conditions,
and move the parameter-check to upper-layer functions.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
after updated cpu context get/set method, the vcpu_dumreg cmd is not
correct anymore as the registers may read from VMCS but meantime hv
shell may not be running on target vcpu.
this patch take use of smp_call_function for vcpu dumpreg and make the
dump always come from correct vcpu.
v2:
- use str pointer to get vcpu_dumpreg context instead of print out directly
in notify handler.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
take use of VCPU_NOTIFY vector, add smp_call_function support.
added a per_cpu field smp_call_info, and make each smp_call_function
is not re-entered, and the caller CPU is returned when all the target
CPUs complete the call.
v4:
- remove global lock
- take use of wait_sync_change function to do the sequence sync
v3:
- remove per_cpu lock in smp_call_info
- use a global lock to ensure smp_call_function sequence
- use pcpu_sync_sleep to wait IPI complete
v2:
- after new smp function come, if old one exist, changed from overwirte
with the new one to ignore the new one.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
pcpu_sync_sleep monitor "uint64_t sync" change to "1UL << mask_bit",
which is not very clear to take use of it.
change it to wait_sync_change, means monitor "uint64_t sync" change to
"wake_sync", make the function clear to use.
And expose it for the usage of the following patches.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Now the DM has adopted the new VHM request state transitions and
REQ_STATE_FAILED is obsolete since neither VHM nor kernel mediators will set the
state to FAILED.
This patch drops the definition to REQ_STATE_FAILED in the hypervisor, makes
''processed'' unsigned to make the compiler happy about typing and simplifies
error handling in the following ways.
* (dm_)emulate_(pio|mmio)_post no longer returns an error code, by introducing a
constraint that these functions must be called after an I/O request
completes (which is the case in the current design) and assuming
handlers/VHM/DM will always give a value for reads (typically all 1's if the
requested address is invalid).
* emulate_io() now returns a positive value IOREQ_PENDING to indicate that the
request is sent to VHM. This mitigates a potential race between
dm_emulate_pio() and pio_instr_vmexit_handler() which can cause
emulate_pio_post() being called twice for the same request.
* Remove the ''processed'' member in io_request. Previously this mirrors the
state of the VHM request which terminates at either COMPLETE or FAILED. After
the FAILED state is removed, the terminal state will always be constantly
COMPLETE. Thus the mirrored ''processed'' member is no longer useful.
Note that emulate_instruction() will always succeed after a reshuffle, and this
patch takes that assumption in advance. This does not hurt as that returned
value is not currently handled.
This patch makes it explicit that I/O emulation is not expected to fail. One
issue remains, though, which occurs when a non-aligned cross-boundary access
happens. Currently the hypervisor, VHM and DM adopts different policy:
* Hypervisor: inject #GP if it detects that the access crossed boundary
* VHM: deliver to DM if the access does not complete falls in the range of a
client
* DM: a handler covering part of the to-be-accessed region is picked and
assertion failure can be triggered.
A high-level design covering all these components (in addition to instruction
emulation) is needed for this. Thus this patch does not yet cover the issue.
Tracked-On: #875
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISARC has requirements about Marco redefinition, usage of ++ or -- and
assignment operator in boolean expression. This patch is used to solve
these violations.
The modifications are summarized as following:
1.The HC_VM_SET_MEMORY_REGION, HC_VM_GPA2HPA, HC_VM_SET_MEMORY_REGIONS are
redefined twice in acrn_hv_des.h, so delete them to solve the macro
redefinition violations.
2.The macro BUS_LOCK are redefined in bits.h and atomic.h, then delete
the declaration in both two files, add a new declaration in cpu.h and
include the header file.
3.modify the code to solve the improper usage of -- operators in string.c.
4.modify the while loop to for loop to avoid assignment operator in
boolean expression in vlapic.c.
v1 -> v2:
*Modify the format of commit logs and signed-off name.
*Modify the code format from 'd = d-1;' to 'd--;' to be better.
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Thare some debug specific code which don't run on release version, such as vmexit_time,
vmexit_cnt, sbuf related codes, etc...
This patch encloses the codes with #ifdef HV_DEBUG.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This commit cleans up the irq APIs which are a bit confusing.
- pri_register_handler(), normal_register_handler() and
common_register_handler() into request_irq(), and removed
the unnecessary struct irq_request_info;
- rename the unregister_common_handler() to free_irq();
After the revision, the common irq APIs becomes:
- int32_t request_irq(uint32_t irq,
irq_action_t action_fn,
void *action_data,
const char *name)
- void free_irq(uint32_t irq)
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since vector is x86 specific concept, we'd like to hide it from common irq APIs.
This commit
- adds static irq:vector mappings for special interrupt such as timer
and cpu notification;
- reserves the irq and vector at initialization;
- removed the vector argument in pri_register_handler(), get reserved vector
from irq_desc in common_register_handler().
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since we don't support shared irq, dev_handler_node which works as action node,
is not needed anymore.
This commit removes the dev_handler_node struct and does some relevant changes,
including:
- moves necessary fields to struct irq_desc: action, priv_data, name; and
removes unused handler_data;
- changes return type of pri_/normal_register_handler() from dev_handler_node*
to int32_t, which is irq num (>= 0) on success, and errno (> 0) on failure.
- changes unregister_irq_handler() to take argument unint32_t instead of
dev_handler_node*;
- changes are made to the places where these APIs are called.
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Because multiple physical devices sharing a single physical pin would be
assigned to a same VM, so UOS could handle the irq sharing. So that we could
remove the physical irq sharing support in HV.
This commit removes the irq sharing support, changes including:
- removed the dev_list field in irq_desc, and clean up codes for the list
operation;
- replace IRQ_ASSIGNED_SHARED and IRQ_ASSIGNED_NOSHARE with IRQ_ASSIGNED;
- remove argument indicating irq is shared;
- revise irq request flow for pt devices to remove dependency on irq sharing:
register irq on adding remapping entery and unregister irq on removal an
entry, and do not register/unregister at remapping an entry.
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Move the definitions of offset of fields in boot_ctx to the same header
file that the struct boot_ctx is in, to reduce the possibility that some
modification would make the offset inconsistant with the fields within
the structure.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- 'reboot.c' defines 'warm_reboot()' only, and this
function is deprecated.
- remove the eXecution attribute of 'mttr.h'
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1) This patch creates static E820 entries for VMs launced by ACRN in
partition mode.
2) Moves vm_description entries from bsp/sbl/ to partition/
3) Removes unused API get_vm_desc_base
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Current EPT check runs after EPT enabling in init_exec_ctrl. This
patch fixes wrong order.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN in partition mode emulates UART for the VMs directly launced
from HV. This patch adds an option to enable/disable vUART for a
VM.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
For Partition mode ACRN, kernel load address and Boot args load address
are hardcoded. Boot args are currently passed from vm description for
each VM. Renamed init_vm0_boot_info to init_vm_boot_info.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Use func(void) rather than func() for the function declaration and
definition based on MISRAC requirement.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
ACRN in partition mode does not have vector and APIC ID remapping for
device interrupts. Only MSIs are supported. No IOAPIC and legacy interrupts
for the VMs in ACRN partition mode.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Adding code to map memory for UOS in partitioning mode ACRN.
HPA starting above 4GB is used for UOS memory. Supports only contiguous memory
from host for UOS. Current implementation supports only 2 GB for UOS memory.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
It's not necessary to specify priority for dynamic allocated vector, because
nested irq is not supported on HV, and irq of any priority would cause VM exit.
This commit makes the following changes:
- remove the argument indicating priority in struct irq_request_info and
following functions:
ptdev_activate_entry()
find_available_vector()
irq_desc_alloc_vector()
normal_register_handler()
- change the macro of vector ranges:
VECTOR_DYNAMIC_START/END for dynamically allocable vectors;
VECTOR_FIXED_START/END for fixed allocated vectors, such as vector for
timer etc.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- add clear trusty memory flag
In some cases such as UOS power off or UOS full reset,
need to clear trusty memory,no need to clear memory such as
UOS S3 or UOS system reset,then add a flag to distinguish it
when destroy secure world.
-- Restore trusty memory to guest normal world.
-- Moved free trusty EPT inside destroy_secure_world
In some cases such as UOS S3 or UOS system reset,
only need to free trusty EPT, this patch move free
trusty EPT inside destroy_secure_world.
Because PD/PT are shared in both secure world's EPT
and normal world's EPT,before freeing trusty EPT,
it will memset all PDPTEs except trusty memory,
then call 'free_ept_mem', it can only free trusty EPT,
and does't affect shared normal world EPT.
v2-->v3:
-- Used new mmu api ept_mr_add when restore trusty memory
to SOS and normal world
-- Dropped this patch "Removed reverted page tables for trusty memory"
because map_mem will be removed in future
It will have a patch, need to update this api(ept_mr_add),
it will not create inverted page tables for trusty memory.
v1-->v2:
-- free trusty ept
still use free_ept_mem, not add a new api,but need to
memset pdptes except trusty memory
-- Removed reverted page tables for trusty memory.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
MISRAC does not allow the use of an inline function with external
linkage.
What this patch does:
- Add the static keyword for the function that is only used in the
definition file.
- Remove the inline keyword for the function that is used in multiple
files.
v1 -> v2:
* Move some functions to headers as static inline function if it is
possible
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Declare a variable with the static qualifier if it is of file scope and
not used in another file.
v1 -> v2:
* remove the unnecessary change to the following variables, which is
due to the report issue
struct multiboot_info *mbi = (struct multiboot_info *)
(HPA2HVA((uint64_t)boot_regs[1]));
struct multiboot_mmap *mmap =
(struct multiboot_mmap *)
HPA2HVA((uint64_t)mbi->mi_mmap_addr);
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
V4:
- Moved error checking to vdev_hostbridge_cfgwrite/vdev_hostbridge_cfgread
V3:
- Unified ops calling and implemented deinit/cfgwrite/cfgread ops,
previously only init op is implemented
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
V4:
- Renamed members for struct pcibar and changed code accordingly
V3:
- Do not use ASSERT
- Use EPT_XX defines when claling ept_mr_add
- Report 64-bit MMIO physical bar to UOS as 32-bit virtual bar
(assume bar size is always less than 4GB), which removed quite some of
64-bit bar handling code
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
V4:
- Clear address cache info after a full cf8/cfc access
- Add NULL pointer checking when calling init/deinit ops
V3:
- Do not use ASSERT
- Loop through the vdev list defined in vm_desctiption table to call the vdev init/unit functions
- Make the cached vbdf info struct per vm instead of per pcpu
V2:
- Fixed MISRA violations
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
V4:
- Renamed members for struct pcibar
- License header fix
- Added vpci_vdev_array to struct vm_description
V3:
- Defined the static centralized vpci table to reduce code size,
previously many of the settings are obtained/generated dynamically
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
In current code, VM0 BSP start mode is hardcoded, in this patch VM0 BSP
start mode is decided by the boot context prepared by bootloader/BIOS.
In current code, VM0 BSP VMCS is override only on UEFI platform.
In this patch, VM0 BSP VMCS is override on both SBL & UEFI platforms.
Also restructure the code of guest init code.
In this patch, a vcpu run_context is initilaized first according to vcpu mode.
Then write the value to vmcs according to run_context value.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
save_segment/load_segment is common code and can be used outside of trusty,
move to a header file.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The structures defined in acrn_efi.h is x86 related, move it
to acrh/x86/guest/.
Also, the headfile will be used on both SBL & UEFI platforms,
rename it to vm0_boot.h
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
EFI stub code need to reference to the struct cpu_gp_regs, which
is currently defined in vcpu.h, however include vcpu.h in EFI stub code
will include other header files not requried by EFI stub code.
After moving the define of struct cpu_gp_regs to a separate
headfile, the file can be included in EFI stub code without other header
files.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
New field in VM's structure:
sworld_snapshot: save cpu_context of secure world.
New hypercall: HC_SAVE_RESTORE_SWORLD_CTX
In UOS S3 suspend path: trusty kernel driver will call this hypercall
to require Hypervisor save context of secure world.
In UOS S3 resume path: virtual firmware will call this hypercall to
require Hypervisor restore context of secure world.
New bit in secure_world_control.flag:
ctx_saved: indicate whether cpu_context of secure world is saved.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The security information will not pass to HV through Hypercall,
so remove the unused HC_GET_SEC_INFO.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Define Bitmap flag to indicate secure world's state:
supported: 0(not supported), 1(supported)
active: 0(inactive), 1(active)
Refine secure_world_memory:
base_gpa_in_sos: base_gpa from SOS's view
base_gpa_in_uos: base_gpa from UOS's view, this is the original base_gpa
allocated by bootloader.
Recording above GPA is for usage of trusty EPT destroy and re-create.
There is an assumption: the secure world's memory address is contiguous
in both SOS and physical side.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN in partitioning mode boots multiple OS. Adding code to parse
VM description structure and a reference description structure for
booting 2 OSes.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
TO inject the
- Invalid Opcode exception
- Stack Fault exception
- Alignment Check exception
to guest.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
When doing copy_to/from_gva, it's possible the guest no page
happens on none-first page. In this case, we need get correct
fault address from gva2gpa.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
Added prepare_vm function as a wrapper function on top of prepare_vm0.
This makes adding support for partition mode ACRN to boot multiple
VMs from HV cleaner.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
MISRA-C requirement:
The value of an expression shall be the same under any order of
evaluation.
The order in which side effects take place is unspecified and may lead
to unexpected results.
This patch add a temporary variable for temporary storage to avoid the
side effects of evaluation order.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
add wrap function cpu_do_idle in default_idle to handle arch cpu specific
idle operation.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Originally, there is cross-references between instr_emul.h and instr_emul_wrapper.h.
User must include both of them when calling instruction emulation functions. This
will raise up some confusion and inconvenience.
So we rearrange the logic of instruction emulation code as following:
- External API -- defined in instr_emul.h
* decode_instruction(struct vcpu *vcpu)
* emulate_instruction(struct vcpu *vcpu)
- Make all other functions as static in instr_emul.c
- Remove instr_emul_wrapper.c/h
No functional change.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
The formal solution has merged,revert this patch.
This reverts commit a9d04cc5ce.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move most of fields from run_context into ext_context for world switch.
these fields do not need doing runtime save/restore during vm exit/entry.
v3:
- update cr0/cr4 registers switch method
v2:
- use struct name ext_context instead of saved_context
- updated according to previous v2 patch
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
there will be 3 types of vcpu runtime contexts:
- runtime contexts always saved/restored during VM exit/entry, which
include general registers rax/rcx/rdx/rbx/rbp/rsi/rdi/r8~r15, cr2 and
msr for spectre control (ia32_spec_ctrl)
- runtime contexts on-demand cached/updated during VM exit/entry, which
include frequently used registers rsp, rip, efer, rflags, cr0 and cr4
- runtime contexts always read/write from/to VMCS, which include left
registers not in above
this patch add get/set register APIs for vcpu runtime contexts, and unified
the save/restore method for them according to above description.
v3:
- update vcpu_get/set_cr0/4 as unified interface to get/set guest cr0/cr4,
use on-demand cache for reading, but always write to VMCS for writing.
v2:
- use reg_cached/reg_updated for on-demand runtime contexts
- always read/write cr3 from/to VMCS
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are potential value outside range of underlying type
in some assignment expressions. This violates Rule 10.3 or
Rule 10.4 of MISRA C:2012.
BTW, all operations shall be conducted in exactly the same
arithmetic (underlying) type, otherwise, there is a
value outside range violation.
Update related assignment expressions.
V1-->V2:
* Fix potential overflow in "pit_calibrate_tsc";
* Move PTDEV_INVALID_PIN definition before
get_entry_info since this MACRO is only used by
debug function.
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Since global vector table is being used on all pcpus, it's not necessary to request timer irq
at each cpu init. With this change, per_cpu timer nodes are removed, and only BSP registers
and unregisters timer irq.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix the parameter name mismatch between API declaration and definition.
v2 -> v3:
* Fix two more violations which are missed in previous report.
shell_puts and console_write
v1 -> v2:
* Replace 'ret_desc' with 'desc'
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
The IOAPIC specification defined EOI register for 0x20 version. The
original vioapic code implemented this register but the version was
still export as 0x11.
Tried to set 0x20, the Linux kernel has't access this EOI register,
still rely on lapic to send eoi.
From Linux ioapic driver comments, it says that only send EOI via EOI
register when met IOAPIC hardware bug.
This patch removes all 0x20 IOAPIC code to reduce the code size.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
To make vioapic simpler, avoid lots of code to convert variable type
between uint8_t and uint32_t.
This patch changes all variable type of pin related variables to
uint32_t instead of original uint_8.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Remove structure vm_attr
Wrap two APIs alloc_vm_id and free_vm_id
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
'hv_main()' wraps several logic which has no dependencies
each other(enable VMX, prepare to create service os VM..),
in this case, split this function to make code logic clear.
remove 'is_vm0_bsp()' & 'hv_main()'
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add the parameter identifier for typedef function pointer.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In order to comply with MISRA C rules, renamed vairables
and function names starting with "_".
The major changes invloves mostly static function
names, as they are being called inside the same file
by a wrapper function.
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
MISRAC requires that the array size should be declared explicitly.
This patch fixes the issues caused by the arrays that are defined in
link_ram.ld.in or assembly file.
v1 -> v2:
* Update the solution based on the info from the following link.
https://sourceware.org/binutils/docs/ld/Source-Code-Reference.html
Fix pattern is like below:
extern char start_of_ROM, end_of_ROM, start_of_FLASH;
memcpy (& start_of_FLASH, & start_of_ROM, & end_of_ROM - &
start_of_ROM);
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Change this API to void type
Add pre-condition, state the input parameters are not NULL.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
And export the API to DM. DM will do system reboot/S3 resume based
on this API.
Also add the pre-assumption description for some vm APIs.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the C99 standard, the order of evaluation associated with
multiple #, multiple ## or a mix of # and ## preprocessor
operator is unspecified. For this case, gcc 7.3.0 manual
does not specify related implementation. So it is unsafe
to use multiple # or ## in a macro.
BTW, there are some macros with one or more "##" which are
not used by hypervisor.
Update relate codes to avoid using multiple # or ## in a macro;
Remove unused macros with one or more "##";
Remove "struct __hack;" at the end of GETCC since it is useless.
Note:
'##' operator usage constraints: A ## preprocessing token shall
not occur at the beginning or at the end of a replacement list
for either form of macro definition.
V1--V2:
Update relate codes to avoid using multiple # or ## in a macro.
V2-->V3:
Remove unused macros with one or more "##";
Remove "struct __hack;" at the end of GETCC since it is useless.
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
-- Check uart enabled flag, it will return if the flag is false.
-- Add function declaration (uart16550_set_property) in console.h
-- Remove unnecessary function declaration(get_serial_handle)
-- Change uart_enabled and port_mapped to bool
-- Fix MISRA-C integer violations
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix the parameter type mismatch between API declaration and definition.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
to remove it as no requirement of bounding i/o handlers
dynamically in hypervisor shell
- update source code related with i/o session
- move shell command definitions from shell_pulic.c
to shell_internal.c
- remove shell_public.c
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently we don't support resume VM in HC API, the real meaning
of the code is to start VM.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. add register_softirq to register a softirq handler
2. rename exec_softirq to do_softirq; raise_softirq to fire_softirq.
3. in do_softirq call registered softirq handler not call
the device softirq handle function directly
4. enable irq after vm exit and disable irq after the first
call do_softirq before vm enter.
5. call do_softirq again when irq disabled to handle the risk
unhandled softirq.
6. rename SOFTIRQ_DEV_ASSIGN to SOFTIRQ_PTDEV
7. remove SOFTIRQ_ATOMIC
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Softirq is not x86 architectural related.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Now, we let guest own most CR4 bit. Which means guest
handles whether the CR4 writting is invalid or not and
GP injection if it's invalid writing.
Two bits are exception here:
we filter VMX and PCID feature to guest (which means
they are supported on native).
So we can't depends on guest to inject GP for these bits.
Instead, we should explicitly trap these CR4 bits update
and inject GP to guest from HV.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
According to SDM:
writing a nonzero value to 63:32 bits of CR0 and CR4 results #GP(0).
writing a nonzero value to reserved bit of CR4 results #GP(0).
We merge the check with always off mask of CR0 and CR4.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
For data structure types "enum vpic_wire_mode, struct stack_canary",
its name is identical with variable name in the same scope.
This MISRA C violation is detected by static analysis tool.
For variables "segment_override, pde_index", its name is identical
with function name. This MISRA C violation is detected.
Naming convention rule:Variable name can be shortened from
its data structure type name.
The following udpates are made:
enum vpic_wire_mode vpic_wire_mode-->enum vpic_wire_mode wire_mode
struct stack_canary stack_canary-->struct stack_canary stk_canary
uint8_t segment_override:1 --> uint8_t seg_override:1
uint32_t pde_index--> uint32_t pde_idx
V1-->V2:
Remove update "enum cpu_state cpu_state-->enum cpu_state state"
and "enum irqstate irqstate-->enum irq_ops_mode ops_mode", other
patch will cover it.
V2-->V3:
Update "uint32_t pde_index--> uint32_t pde_idx".
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
For data structure types "struct pic and struct iommu_domain",
its name is identical with variable name in the same scope.
This MISRA C violation is detected.
Naming convention rule:If the data structure type is used by only one
module and its name meaning is simplistic, its name needs prefix
shorten module name.
Naming convention rule:Variable name can be shortened from its
data structure type name.
The following udpates are made:
struct pic pic-->struct i8259_reg_state i8259
struct iommu_domain iommu_domain-->struct iommu_domain iommu
V1-->V2:
Update "struct iommu_domain iommu_domain-->struct iommu_domain iommu"
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
