Free the virtio_vsock struct resource in virtio vsock deinit function
in case memory leak.
Tracked-On: #7759
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Use the VHOST_NET_F_VIRTIO_NET_HDR in linux system header file,
and set the correct feature bit for Virtio net header.
Tracked-On: #7790
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Fix the memory leakage issue caused by incomplete deinit flow.
Tracked-On: #7759
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Check max ep index in doorbell write function to avoid overwriting
the pci_xhci_dev_emu->eps[XHCI_MAX_ENDPOINTS].
Tracked-On: #7759
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
There was some secure coding style violations of virtio net and tmp,
this patch add some NULL check to fix these violations.
Tracked-On: #6690
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
This patch fix the USB msi capability access failed issue and fix the
MSI pending bit clear bugs.
Tracked-On: #7697
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Flow Table 6-95 from xHCI spec, Ring Segment Size defines
the number of TRBs supported by the ring segment, valid
values for this field are 16 to 4096.
Tracked-On: #6981
Signed-off-by: Liu Long <long.liu@intel.com>
tfd is one data field of FIS for AHCI, it is unacceptable if it is
random value, could cause AHCI data transport failure.
Acturally there is no chance the switch statement has the value other
than 0~3, since there is only 2 bit to deduce.
Add the initial value for tfd as ATA_S_ERROR, which is checked by
function ahci_write_fis_d2h afterwards, so guest driver could handle it well.
Tracked-On: #7679
Signed-off-by: hangliu1 <hang1.liu@linux.intel.com>
The vsock cid type is u64, redefine the cid type to u64, and use
dm_strtoul API replace dm_strtoi.
Tracked-On: #7456
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Replace the exclamation mark with period mark in debug info and fix
the Guest CID max value macro.
Tracked-On: #7456
Signed-off-by: Liu Long <long.liu@linux.intel.com>
The virtio feature bits is 64bits but the access will be split
as two times 32bits access. This patch fixes the bug which overwrites
another side 32bits, and causes feature bits are lost.
Tracked-On: #7456
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Conghui <conghui.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch supports the user space logic of vhost vsock which
is majorly for its initialization phase.
Tracked-On: #7456
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Conghui <conghui.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The patch expose the vhost kernel ioctrl API and remove the virtio_net
operation functions to the virtio_net code module.
Tracked-On: #7456
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Conghui <conghui.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Use needed constants from libderm instead of directly using
kernel UAPI.
Tracked-On: #6688
Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@opensource.tttech-industrial.com>
This patch checks the change of "-s" sub parameters, which was
obsoleted or moved and the print some warnings msg or show the new
format.
The following obsoleted parameters are covered:
-s ,pci-gvt
-s ,virtio-hdcp
-s ,npk
-s ,virtio-coreu
--mac_seed
Reviewed-by: VanCutsem Geoffroy <geoffroy.vancutsem@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Now vdpy_get_display_info/get_edid is called before vdpy_init.
This is incorrect. They should be called after setting up the
connection with vdisplay.
Tracked-On: #7376
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
The virtio_gpu in guest_vm will try to fetch the EDID to query
the supported resolution. Guest vm will send the cmd of
VIRTIO_GPU_CMD_GET_EDID and receive the response of VIRTIO_GPU_RESP_OK_EDID.
Now acrn-dm has some issues in course of handlding EDID request: Incorrect
resp type, the incorrect response. This will cause that the guest_vm fails
to fetch the EDID.
Tracked-On: #7376
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
In course of creating the udmabuf, udmabuf_create_list is allocated and
passed to kernel. After the dmabuf is returned, it is not used
any more. Need to free it otherwises it will cause the memory leak.
Tracked-On: #7337
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
It still tries to access the gpu->vdpy_handel after the gpu
is free. This is incorrect.
Tracked-On: #7337
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Otherwise the memory related with vga_context is leaked.
v1->v2: Use the pthread_join instead of usleep to wait for
the termination of vga_thread.
Tracked-On: #7296
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
This is not needed as it is reconfigured in course of vga_thread_loop.
At the same time it is not thread-safe as the 3D api is involved
in vdpy_surface_set.
v2->v3: move the initialization of vga_surface width/height into
vga_thread.
Tracked-On: #7296
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
In order to support the VGA op, one vga_thread is created. But
in course of virtio_gpu_reset, it will also create one vga_thread.
This is incorrect.
v1->v2: the thread_id of vga_thread is treated as read-only after
the thread is created.
One thread_status based on atomic type indicates the life_cycle
of vga_thread.
v2->v3: Add the vga_thread_mtx in course of changing life_cycle of vga_thread
Tracked-On: #7296
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Add license information to virtio_gpu.c
Fix some grammar issues.
Tracked-On: #7241
Signed-off-by: Sun Peng <peng.p.sun@linux.intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Many of the license and Intel copyright headers include the "All rights
reserved" string. It is not relevant in the context of the BSD-3-Clause
license that the code is released under. This patch removes those strings
throughout the code (hypervisor, devicemodel and misc).
Tracked-On: #7254
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The DMABuf sharing is based on the BLOB feature. This will
check the attribute of system memory for guest_vm and udmabuf.list_limit
parameter. If it meets with the requirement, export the BLOB feature
so that the FE driver in guest_vm can send the blob cmd.
VIRTIO_GPU_CMD_CREATE_BLOB:
VIRTIO_GPU_CMD_SET_SCANOUT_BLOB:
VIRTIO_GPU_CMD_SET_FLUSH(BLOB)
Tracked-On: #7210
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Now Virtio-gpu FE is using the below cmds to submit the framebuffer that
needs to be displayed.
VIRTIO_GPU_CMD_TRANSFER_TO_HOST_2D
VIRTIO_GPU_CMD_SET_SCANOUT
VIRTIO_GPU_CMD_FLUSH
This will introduce twice copy. In order to optimize the twice copy, the below
cmds are added and the virtio-gpu BE can use the dma-buf sharing.
VIRTIO_GPU_CMD_CREATE_BLOB
VIRTIO_GPU_CMD_SET_SCANOUT_BLOB
VIRTIO_GPU_CMD_FLUSH
V2->V3: Remove the inlined header file of devicemodel/include/public/udmabuf.h
to avoid the license issue
Tracked-On: #7210
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Legacy VGA & VBE interface as a common interface is supported by
many legacy and modern OS. Many installer of OS distribution use
this interface to display the GUI of installer when setup a refresh
new installation on bare-metal. Besides, Windows OS always use this
interface to display it's BSOD, recovery mode & safe mode GUI. It
is need because Windows don't include virtio-gpu driver as their
in-box driver, VGA interface will be used before the virtio-gpu
driver been installed.
To be compatiable with the PCI bar layout of legacy VGA, the layout
is refined to meet with the requirement of legacy VGA and modern
virtio-gpu.
BAR0: VGA Framebuffer memory, 16 MB in size.
BAR2: MMIO Space
[0x0000~0x03ff] EDID data blob
[0x0400~0x041f] VGA ioports registers
[0x0500~0x0516] bochs display interface registers
[0x1000~0x17ff] Virtio common configuration registers
[0x1800~0x1fff] Virtio ISR state registers
[0x2000~0x2fff] Virtio device configuration registers
[0x3000~0x3fff] Virtio notification registers
BAR4: MSI/MSI-X
BAR5: Virtio port io
Tracked-On: #7210
Signed-off-by: Sun Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao, yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Hardware cursor emulation of virtio-gpu video adapter. Guest vm can
show its own cursor in virtual display, not share the cursor with
service vm. It also accelerated by SDL(OpenGL ES 2.0 backend) API
with hardware acceleration based on the GPU hardware own by service
vm.
Tracked-On: #7210
Signed-off-by: Sun, Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao, yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Implement 2D mode of virtio-gpu adapter which can transfer outputs
from guest vm framebuffer and store them to host 2D scanout buffers.
These 2D scanout buffer can be shown by calling vdpy_surface_set/update
API provided device/include/vdisplay.h.
Virtio-gpu 2D commands calling sequence:
1) VIRTIO_GPU_CMD_GET_EDID
2) VIRTIO_GPU_CMD_GET_DISPLAY_INFO
3) VIRTIO_GPU_CMD_RESOURCE_CREATE_2D
4) VIRTIO_GPU_CMD_RESOURCE_ATTACH_BACKING
5) VIRTIO_GPU_CMD_SET_SCANOUT
6) VIRTIO_GPU_CMD_TRANSFER_TO_HOST_2D
7) VIRTIO_GPU_CMD_RESOURCE_FLUSH
Tracked-On: #7210
Signed-off-by: Sun, Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao, yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Extended display identification data(EDID) is a data to store
display timings which are supported by ACRN virtual monitor.
Virtio-gpu FE driver will request it to config crtc for display
resolutions.
Tracked-On: #7210
Signed-off-by: Sun, Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao, yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
ACRN virtual monitor shown as a GUI system window of service vm.
It can display graphic outputs of guest vm which is stored in
service vm's buffers by virtio-gpu. Display operation is accelerated
by Intel GPU PF(SRIOV) device with SDL(OpenGL ES 2.0 backend) API.
This provides one generic display solution. When the virtio-gpu is
added, it will firstly try to setup the connection to graphics system
and then display the framebuffer from the guest vm in the created
window region.
Tracked-On: #7210
Signed-off-by: Sun, Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao, yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Virtio-gpu is a virtio based graphic adapter. It supports 2D mode
which can transfer the guest vm's framebuffer into service vm's
buffers for displaying. It can co-work with Intel GPU VF(SRIOV)
device and provide thransport for the accelerated contents. With
this, guest vm can benefit Intel GPU hardware to accelerate media
coding, 3D rendering and compute.
Tracked-On: #7210
Signed-off-by: Sun, Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao, yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
i2c bus counter 'acpi_i2c_adapter_num' shall be updated
when virtio-i2c device is de-initialized, else in user VM
reboot case, this global counter will not be reset and
keep the value last user VM boot, which is not expected
and cause iasl(building ACPI data) program crash finally
because the i2c device name space overflow.
Tracked-On: #7208
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Now, the DM assumes the device name entered by user is dependent on
the type.
For example, the device of tap type is named tap_TAAG, this patch
remove the above assumption.
User could set any name, no matter the code of DM or actually created,
it is represented by user input.
Tracked-On: #6690
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: Chenli Wei<chenli.wei@linux.intel.com>
HMAC_*, MD5_* and SHA256_* are deprecated since openssl3.0, replace them with the corresponding equivalents.
Tracked-On: #6743
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
When the virtio-XXX pci devices fall back to legacy PCI intx,
the pci_irq_assert is called to inject the interrupt and then
the pci_irq_deassert is used to mark the completion of PCI interrupt.
Currently the HV vIOAPIC uses the pin_state for the interrupt injection
of legacy PCI intx. In such case it will fail to inject the PCI legacy
intx and the guest system fails to be booted when adding the boot option
of "pci=nomsi".
PCI legacy INTx usually use active low level trigger mode as it is Open-Drain
state and allows multitple interrupt signals to share a single line.
https://wiki.osdev.org/PCI_Local_Bus_Signals
In such case DM needs to set the correct state for the PCI device so that the
HV vIOAPIC can help to inject the PCI legacy intx.
BTW: When the MSI/MSIX is used for PCI device, it uses another mechanism
to inject the interrupt. It is harmless to configure the initial state.
Tracked-On: #7124
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The current mac detection logic only check whether there are parameters
after tap opt. Don't care whether the parameter is MAC or not, then
mac_provided will be set to 1, which will disable the mac_seed setting
when using sub parameters
This patch will check opt and fix the above issue.
Tracked-On: #6690
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
fix bug: if PTM-CAP device, like TSN in multi-hostbridge could cause
acrn-dm crash.
original PTM PCI code has not handled multi-hostbridge case, and just
handled hostbridge (00:00.0) case.
this patch calls PCI access API to handle PTM-CAP device/bridge
(root port) structure, to avoid scan PCI hierarchical.
Tracked-On: #7045
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
As a parameter of acrn-dm,the mac_seed is only used for virtio-net.
So this patch change it to the sub-parameter of virtio-net.
Tracked-On: #6690
Acked-by: Yu1 Wang <yu1.wang@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
Remove device name requirement for “tap” and "vmnet", change the
parameter format like:
"-s 4,virtio-net,tap/vmnet=dev_name".
Tracked-On: #6690
Acked-by: Yu1 Wang <yu1.wang@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
The current code would cause infinite calls to vq_getchain()
because that:
- error check of vq_getchain() return value is missing.
- virtqueue misunderstand that there are avaliable descripters
even though the idx of avail ring is invalid.
This patch fixes it by checking validity of the return of
vq_getchain() and jump out of the loop for invalid return value.
This patch alse add validity check in judgment of avaliable
descriptor, and check if the diff between idx of avail ring and
the last idx is greater than size of this queue.
Tracked-On: #7038
Signed-off-by: Wen Qian <qian.wen@intel.com>
Signed-off-by: Li Fei <fei1.li@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
The following parameters have not used by new design:
1. --vsbl <vsbl_file_path>
2. --part_info <part_info_name>
3. -G, --gvtargs <GVT_args>
4. -s <slot>,pci-gvt
5. -Y, --mptgen
6. -s <slot>,virtio-hdcp
7. -s <slot>,npk
8. -s <slot>,virtio-coreu
9. -i, --ioc_node <ioc_mediator_parameters>
10. --pm_by_vuart [pty|tty],<node_path>
11. --pm_notify_channel <channel>
This patch remove these parameters from usage and comment in code to
explain they are all obsoleted now.
Tracked-On: #6690
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
Otherwise it will fail to set the GPU opregion/stolen_memory for guest VM in
course of GPU passthrough and the display can't work.
Tracked-On: #6988
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
this patch validates input of virtio_console_control_tx()
function to avoid potential progream crash with malicious
input from guest.
Tracked-On: #6851
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Fix the Vulnerable coding style in xhci and pci core
Tracked-On: #6769
Signed-off-by: Liu Long <longliu@intel.com>
Reviewed-by: Huang, Yonghua <yonghua.huang@intel.com>
Rename uos_rpmb_size to user_vm_rpmb_size.
rename get_uos_count to get_user_vm_count.
rename get_uos_id to get_user_vmid.
rename uos_id to user_vmid.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Rename SOS_VM_NUM to SERVICE_VM_NUM.
rename SOS_SOCKET_PORT to SERVICE_VM_SOCKET_PORT.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename PCI_DEV_TYPE_SOSEMUL to PCI_DEV_TYPE_SERVICE_VM_EMUL.
rename SHUTDOWN_REQ_FROM_SOS to SHUTDOWN_REQ_FROM_SERVICE_VM.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename SHUTDOWN_REQ_FROM_UOS to SHUTDOWN_REQ_FROM_USER_VM.
rename UOS_SOCKET_PORT to USER_VM_SOCKET_PORT.
rename SOS_CONSOLE to SERVICE_VM_OS_CONSOLE.
rename SOS_LCS_SOCK to SERVICE_VM_LCS_SOCK.
rename SOS_VM_BOOTARGS to SERVICE_VM_OS_BOOTARGS.
rename SOS_ROOTFS to SERVICE_VM_ROOTFS.
rename SOS_IDLE to SERVICE_VM_IDLE.
rename SEVERITY_SOS to SEVERITY_SERVICE_VM.
rename SOS_VM_UUID to SERVICE_VM_UUID.
rename SOS_REQ to SERVICE_VM_REQ.
rename RTCT_NATIVE_FILE_PATH_IN_SOS to RTCT_NATIVE_FILE_PATH_IN_SERVICE_VM.
rename CBC_REQ_T_UOS_ACTIVE to CBC_REQ_T_USER_VM_ACTIVE.
rename CBC_REQ_T_UOS_INACTIVE to CBC_REQ_T_USER_VM_INACTIV.
rename uos_active to user_vm_active.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
