Provide a minor fix for following issue:
Emulated USB controller Vendor ID and Device ID are swapped.
Tracked-On: #3053
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Reviewed-by: Xu, Anthony <anthony.xu@intel.com>
Hostbridge is necessary for passing kernel pci subsystem initialization
sanity check which is located in pci_sanity_check(). It will check
whether a host bridge exists.
BTW, set rtvm flag explicitly.
Tracked-On: #3152
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
As vm config tool will override the passthrough devices if run on
different hw, and it will take a lot of work to search and
replace the passthrough device.
This patch refine the passthrough devices that tools to overwrite.
Tracked-On: #3127
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
virtio_gpio_ops variable type is static,so use "+=" will let
the value keep increasing when acrn-dm reset.
Tracked-On: #3118
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Signed-off-by: fuyongjie <fuyongjie@neusoft.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch tries to fetch max vcpu per vm from HV instead of hardcode in DM.
Tracked-On: #3116
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
for vm_name with vxworks_vm1 or zephyr_vm1 or vm1
grep "vm1" will match three of them, add -w option fix this issue
Tracked-On:#3081
Signed-off-by: zhangyun <yunx.zhang@intel.com>
This patch adds one sample script to launch Windows as guest.
Tracked-On: #3099
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
AcrnGT traps and intercepts the memory region defined by PCI bar in
service OS kernel driver. No need to register the bar associated region
in dm. By the way, some OS changes BAR start address and there is no
mechanism to reflect the gvt changes back to dm. It causes problem that
other devices may register new region which falls in GVT `old` region,
and leads to hypervisor crash.
v4: Add FIXME tag. It's a short term solution before migrated to OVMF
v3: rewording the comments
v2: removed unnecessary braces and use printf to log (Peter)
Tracked-On: #2976
Reviewed-by: He, Min <min.he@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Liu Xinyun <xinyun.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch add one sample script to launch VxWorks as guest.
Tracked-On: #3069
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
This patch adds support to trigger rescan of virtio-blk device by the
guest VM. This is an alternate to hot-plugging virtio-blk device.
This feature stems from the kata requirement, which hot-plugs container
rootfs after the VM is launched.
As part of virtio-blk rescan,
1. Update the backing file for the virtio-blk device with valid file.
Basically update the empty file (with dummy bctxt) that was passed
during VM launch.
2. Update virtio-blk device configurations for udpated backing file.
3. Update size associated with valid backing file in the config space.
4. Notify guest OS, of the new config change.
5. On this notification, guest will do the following.
(i). Update virtio-blk capacity.
(ii). Revalidate the disk.
(iii). Identify the newly plugged block device.
v5 -> v6:
- Removed use of dummy file and added a new parameter "nodisk"
to virtio-blk which indicates user wants to create a virtio-blk
device with dummy backend.
- Moved vm_monitor_rescan from pci core to virtio-blk as it currently
applies to only virtio-blk.
v4 -> v5:
- Reverted back logic, so that blkrescan is only supported when
VM is launched with empty backend file.
v3 -> v4:
- Close block context before allocating a new one
- Allow backend filepath with additional options to be more generic
- Remove blank lines introduced as part of previous patches.
v2 -> v3:
- Renamed vdev ops vdev_blk rescan to vdev_rescan
- Renamed montior ops virtio_blkrescan_ops to virtio_rescan_ops
- Consolidated virtio-blk configuration specific part into
a separate function
- Removed size requirement in acrnctl command.
v1 -> v2:
- Added more comments in the code.
- Renamed APIs from displug to blkrescan, inline with acrnctl cmd.
- Split the patch into two. This corresponds to changes in acrn-dm.
Tracked-On: #3051
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
add logger_setting params in launch_uos.sh for NUC & UP2;
then the logger system can work; by default console logger
is enabled.
Tracked-On: #3012
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
the logger setting can be input as acrn-dm params;
so need parse it to init logger system.
Tracked-On: #3012
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
kmsg logger used to output ACRN-DM log to /dev/kmsg,
it is easy to sync with kernel log.
it is better just output key info or error/failure
log to kmsg for kernel log size is limited.
Tracked-On: #3012
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
also set default logger as console and enabled.
Tracked-On: #3012
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
For Linux kernel, the UART driver will disable IER.THRE. But for Windows, it
will keep IER.THRE turn on then cause interrupt storm.
From pc16550d UART spec, INTR PIN description:
"Interrupt. This pin goes high whenever any one of the following interrupt types
has an active high condition and is enabled through the IER Receiver Error Flag;
Received Data Available timeout (FIFO Mode only); Transmitter Holding Register
Empty; and MODEM Status. The INTR signal is reset low upon the appropriate
interrupt service or a Master Reset operation."
And Interrupt Reset Control of Transmitter Holding Register Empty Interrupt
description:
"Reading the IIR Register (if source of interrupt) or Writing into
the Transmitter Holding Register"
The datasheet hasn't describe very clear if the THRE interrupt will be
re-generate after "Reading the IIR Register". We assume it will not do
that, so the THRE interrupt only generate when THR turn to empty.
This patch follows above assumption to resolve the interrupt storm cause WaaG
boot failed issue.
Tracked-On: #2713
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
ACRN interepts vm_set/reset_ptdev_intx_info hypercalls to set
the SOS vdev properties to indicate it is assigned to UOS. Today,
upon vm_reset_ptdev_intx_info hypercall ACRN does not revert the SOS
vdev properties back to that of SOS, as vbdf and pbdf were not
part of the API. This would leave ACRN data structures in an incorrect
state
Tracked-On: #2700
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When vm reset,the gpio line state is busy if we don't close the fd.
Tracked-On: #3028
Signed-off-by: fuyongjie <fuyongjie@vip.qq.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
With latest gcc, there are build error with current ACRN code.
Fixing could involve many code changes. We use gcc option to
remove build error as temperary workaround. And will fix the
build error one by one.
Tracked-On: #3010
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
When UOS set failling irq type, gpio BE will only request GPIOEVENT_REQUEST_FAILLING_EDGE
event from native gpio driver which will cause the last_level value is always 0.
So last_level can't be used to check whether interrupt should be injected or not.
It is the same for rising irq type.
v2: refine commit message.
Tracked-On: #3010
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Signed-off-by: fuyongjie <fuyongjie@neusoft.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When the "i915.enable_gvt=0" is added for SOS kernel boot args, ACRN-DM will
fail in course of gvt initialization and errno is returned directly.
As the errno defined in linux/errno.h is positive, it will continue
the unexpected initialization in ACRN-DM and then the segment fault is
triggered.
So negative errno is returned in order to terminate the initialization.
Tracked-On: #2584
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
When acrn-dm is started by acrnd as a background process, STDIN is
redirected to journal. In this case mevent_add cannot be called on
the fd of STDIN.
Tracked-On: #2998
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
will access null pointer if 'gvt' is null.
Tracked-On: #1479
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
mmio_hint in mem.c can potentially be accessed concurrently in
emulate_mem() because it only holds a read lock. Use a local variable to
make sure the same entry address is used throughout the function. Since
it only serves as a hint, it's okay if the function does not use the
most up-to-date version of mmio_hint, as long as mmio_hint is accessed
atomically.
Explicitly enforce natural alignment on mmio_hint to guarantee atomic
accesses on x86 and increase code portability, even though compilers
most likely always do it.
Entries in the RB tree are only removed in unregister_mem_int() while
holding a write lock, so accessing mmio_hint while holding a read lock
is safe.
Tracked-On: #2902
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Following up on d648df766c, surgically
remove all the functions related to enable_bar()/disable_bar() that got
introduced in 8787b65fde.
Tracked-On: #2902
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Change return type to bool when returning int is not necessary.
Tracked-On: #2902
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Add interface to get hardware information and
configurations for current platform.
Tracked-On: #2538
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per debugging requirement, map the watchdog reset to warm reset.
So the ramconsole could be used to capture the kernel log of UOS
before watchdog is hit.
Tracked-On: #2471
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Update PCIR_SUBDEV_0 and PCIR_REVID in PCI configuration space to adapt
windows virtio-input driver. Otherwise virtio-input driver on Windows
will not be loaded correctly.
Tracked-On: #2962
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Guest OS for example Windows will disable bars before shutdown. Bars
are unregistered when they are disabled. Trying to unregister a bar
which has been unregistered causes a assertion. In pci_emul_free_bars
only those enabled bars should be unregistered.
Tracked-On: #2962
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
ACPI PM timer is disabled in FADT since there is no pm timer emulation
in device model now.
Tracked-On: #2962
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
It is found that windows will issue blkio operation with amount of
sectors in one request. This patch extends the max iov number of
virtio block to 256.
Tracked-On: #2962
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
There is a deadlock when emulate_mem is called on the memory region
of PCI extended configuration space. The call trace is something like:
emulate_mem
-> pci_emul_ecfg_handler
-> pci_cfgrw
-> pci_emul_cmdsts_write
-> unregister_bar/register_bar
-> modify_bar_registration
-> unregister_mem/register_mem
mmio_rwlock is hold in emulate_mem when calling unregister_mem/
register_mem which is trying to acquire mmio_rwlock again, and deadlock
happened.
It is possible that bar address is changed just between a on-going
MMIO access which can bring a race condition in theroy. Guest needs to
take care of the serial operation between bar addess update and MMIO
access of that bar.
Tracked-On: #2962
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Signed-off-by: Liu Shuo A <shuo.a.liu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Sometimes guest OS writes PCIR_COMMAND register to disable the device,
then update the bar address followed by a write to PCIR_COMMAND register
to enable the device again. In this case unregister_bar/register_bar
should be called otherwise the IO/MMIO regions monitored by device model
will not be updated accordingly.
Tracked-On: #2962
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Signed-off-by: Liu Shuo A <shuo.a.liu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Windows will set 0x262a0 for smi cmd pio, need to mask the higher bits
due to smi command is 8 bits register. Otherwise, it cause the
ACPI_ENABLE case can't be matched, and windows expecting the SCI_EN of
PM1_CONTROL be set after switch to ACPI mode. Finally, cause windows
trigger panic.
Tracked-On: #2962
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
This patch adds the support of inet socket as the backend of uart
emulation. Data written by guest uart is transferred to a socket and
data from socket is forwarded to guest uart. This enables something
called "Uart Over TCP" which is useful in some case such as WinDbg
connection over uart. The command line syntax is as follows:
-l comX,tcp:port_number
Tracked-On: #2962
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Dynamic memory stored in 'elf32_phdr' allocated
through 'calloc' be lost.
the patch port from apl_sdc_stable branch.
Tracked-On: #2705
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
There are several duplicate definitions for check_dir, it can check or create directory at will. However, only acrnd and dm monitor can create the directory. This commit fixs the possibility of creating directory at will by no permission process, which adds a param flags to conctrl if it should create the directory. By the way, this commit collates related MACRO into the same file , deletes the duplicate definitions in another files and fixs some format issues.
Tracked-On: #2886
Signed-off-by: Mao Jiang <maox.jiang@intel.com>
Acked-by: Yan, Like <like.yan@intel.com>
The code mixed the usage on term of UUID and GUID, now use UUID to make
code more consistent, also will use lowercase (i.e. uuid) in variable name
definition.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The old logic to process control transfer failure only include two cases:
1 Short packet
2 Stall.
This patch includes all possible failures reported by Libusb and does
related emulation for UOS
Tracked-On: #2918
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Should not set hci_address to zero during USB reset.
Tracked-On: #2922
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
For multiple guest os and particular audio features support domain id
and name is required.
Tracked-On: #2924
reviewed-by: Yu Wang <yu1.wang@intel.com>
reviewed-by: Yakui zhao <yakui.zhao@intel.com>
reviewed-by: Binbin Wu <binbin.wu@intel.com>
Signed-off-by: Marcin Pietraszko <marcin.pietraszko@intel.com>
Add SDC ACPI device in dsdt, and assign GPIO 0 to SDC for SD card
detection.
Currently, the SD card hotplug function needs to insert SD card when
system boot, otherwise, it does not work. Since it needs P2SB virtualization
to set SD card presence state, and P2SB does not support user space interfaces
so this is an known issue.
Tracked-On: #2512
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When LINK type TRB are received among multiple BULK TRBs, the copying
logic in DM will miss one or more TRBs. This patch is used to fix it.
Tracked-On: #2926
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The current xHCI mediator doesn't well support disable endpoint command.
This patch is one workaround for disable endpoint command to avoid
xHCI mediator to continue handle already dropped data.
Tracked-On: #2927
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Some projects based on ACRN don't want tap name to contain "acrn_"
prefix. This patch removes that prefix.
Tracked-On: #2509
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
GPIO set/get value can be operated by accessing PIO space and the PIO
register definition for GPIO is in gpio_dm.h, frontend driver or ACPI
control methods can operate GPIO based on it.
GPIO mediator also defines ACPI control methods to support GPIO
operations, GPIO consumers can invoke PIO_GPIO_SET_VALUE/PIO_GPIO_GET_VALUE
in their own DSDT to set/get one GPIO value via ACPI control method.
v2: 1) Fix code style.
2) Use virtio configuration space callbacks to implement GPIO PIO operations
that replace pci_gpio_read/pci_gpio_write with virtio_cfgread/virtio_cfgwrite.
3) Return 0xFFFFFFFF as invalid result of PIO reading instead 0.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
1. free memory during pci_xhci_dev_destroy.
2. add libusb_free_device_list to free the list of devices previously
discovered using libusb_get_device_list().
3. fix possible memory corruption.
Tracked-On: #2892
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
To keep consistency between HV and DM about PM1A_CNT_ADDR,
it is better to replace the PM1A_CNT related MACROs used in DM
with VIRTUAL_PM1A_CNT related MACROs in acrn_common.h.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
This patch add one new parameter --rtvm to indicate if the guest is a RTVM or not.
For RTVM, it may be not interference by SOS.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Users of pthread_cond_wait() should take care of spurious wakeups and it
is usually used in conjunction with a predicate. Not doing so can result
in unintended behavior. For example:
virtio_net_tx_thread():
entry -> pthread_cond_wait() -> spurious wakeup ->
vq_clear_used_ring_flags() -> segfault (vq->used uninitialized)
tpm_crb_request_deliver():
entry -> pthread_cond_wait() -> spurious wakeup ->
swtpm_handle_request() called needlessly
virtio_rnd_get_entropy():
entry -> pthread_cond_wait() -> spurious wakeup ->
no avail ring processing ->
virtio_rnd_notify() skips pthread_cond_signal() due to
rnd->in_progress ->
vq_endchains() called needlessly ->
wait in pthread_cond_wait() indefinitely
Fix these uses of pthread_cond_wait() by using predicates.
The only use case without a clear predicate is the tx thread in
virtio-mei, because it works with two-dimensional linked lists.
v1 -> v2:
- fix bugs and comments
- reduce code redundancy
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
- explicitly initialize the connections list
- use a do-while loop for vmei_proc_tx() since the first call must
always succeed
- make sure active_clients is initialized before creating the tx thread
v1 -> v2:
- split the cleanup commit into two parts
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Remove the uses of LIST_FIRST() and LIST_NEXT() plus an extra pointer.
Also, call LIST_INIT() in vmei_me_client_destroy_host_clients() before
releasing the mutex.
v1 -> v2:
- split the cleanup commit into two parts
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Use pthread_cond_broadcast() while holding the mutex to guarantee the
signaling of its condition variable.
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
virtio-blk never sets used_all_avail when calling vq_endchains(), which
may become problematic if VIRTIO_F_NOTIFY_ON_EMPTY is enabled.
Provide vq_endchains() with that info to ensure the delivery of an
interrupt when the avail ring is drained in the case of
VIRTIO_F_NOTIFY_ON_EMPTY.
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Make sure VQ_ALLOC is visible only after vq is completely initialized.
This ensures vq_ring_ready() is reliable when it returns true.
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Change return type to bool when returning int is not necessary.
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
- Remove QemuFwCfg/QemuFwCfgS3Lib
- Use ACRN E820 map to query system memory size
- Support 64-bit PCI host aperture via ACRN E820
- Remove debug code in release build
- Take out unnecessary OVMF drivers
- Revert "Enable MP support"
- Use CPUID 0x40000010 to determine tsc frequency
Tracked-On: #2868
Signed-off-by: Peter Fang <peter.fang@intel.com>
This flag indicates that if the vm is RTVM.
And if a vm has GUEST_FLAG_LAPIC_PASSTHROUGH flag set,
we must set the GUEST_FLAG_RT at the same time.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
The patch adds mount namespace for the container. Without the patch
when we destroy the container, there still have mountinfo for the
container. This is one workaroud for runC bug. If the mount namespace
is disabled, when try to mount host "/" to container "/", there will
cause the issue. Detail discussion as following link.
"https://groups.google.com/a/opencontainers.org/forum/#!searchin/
dev/mount$20namespace%7Csort:date/dev/p10bq-kXODk/obkqBRdxCQAJ"
After enable mount namespace, some small performance imapcts for
specific mediator, likes USB. Will keep monitor runc community,
and revert this patch once related runc patches get integrated.
Tracked-On: #2020
Signed-off-by: Long Liu <long.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The patch adds "-C" parameter in sample launch_uos.sh file to enable
launch Device-Model in runC container. The argments will be linked to
SOS /usr/share/acrn/add/vm1.args, and acrnd will use the it as default
start argument.
Tracked-On: #2020
Signed-off-by: Long Liu <long.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Length of vmname is restricted to MAX_VM_OS_NAME_LEN. Keep it
coincide with VM name array size in vm_config.
Tracked-On: #2851
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
devicemodel/include/public/acrn_common.h should be identical with
hypervisor/include/public/acrn_common.h, so we can use a soft link
to hypervisor's acrn_common.h for devicemodel.
Tracked-On: #2851
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
smbios table is not required so remove it.
Tracked-On: #2577
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Guest OS (e.g. Linux) may rely on a gap in E820 map in the 32-bit memory
space to determine the MMIO space for its PCI devices. Leave this gap
when building E820 map to keep the guest's PCI subsystem working.
After commit 7752d5cfe3d11ca0bb9c673ec38bd78ba6578f8e, Linux kernel no
longer requires the MMCONFIG region to be reserved in the E820 map.
Nonetheless, keep it in the reserved region to be on the safe side.
Tracked-On: #2843
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
print each IRQ descriptor interrupts number and all of IRQ descriptors
interrupts when UOS requests or releases a GPIO IRQ.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Support reading GPIO value when the GPIO switches to IRQ mode.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
GPIO IRQ controller emulation is used to handle level trigger and
edge trigger interrupts. Use GPIO IRQ virtqueue to handle IRQ chip
operations and GPIO event virtqueue to indicate IRQ source to UOS.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
add the GPIO IRQ definitions, and implement the GPIO IRQ
initialization and deinitialization.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There are two virtqueues for irq, one for handling the operations of
front-end irq controller and the other for triggering the interrupt.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
OVMF requires a more descriptive mechanism than RTC CMOS to retrieve
ACRN's memory layout, so we now pass the E820 map to it, starting at
0xEF000 (ROM area).
ACRN currently uses [4GB, 5GB) as its 64-bit PCI host aperture. This is
inconsistent with OVMF's assumption of its platform's memory layout,
because it derives the size of high memory from RTC CMOS, which is
incapable of describing the 64-bit PCI hole.
By default, OVMF uses RTC CMOS 0x5b/0x5c/0x5d to determine the size of
high memory. This value only tells OVMF how much memory is above 4GB,
but not the platform's memory layout above 4GB.
Using RTC CMOS works for QEMU, because QEMU places its 64-bit PCI host
aperture above its highmem. Therefore, OVMF can always assume highmem is
located at [4GB, 4GB + highmem), which is not where ACRN's highmem is
located. For example, if we have 1GB of usable memory above 4GB, ACRN
will place it at [5GB, 6GB).
This change allows OVMF to correctly identify the guest's memory layout.
It will consider any reserved region above 4GB as 64-bit PCI host
aperture.
MP table, SMBIOS and ACPI tables are all located above 0xF0000 so it is
guaranteed that there is no overlap. There can only be a maximum of 128
E820 entries.
v1 -> v2:
- provide more explanation to this commit
- add signature before E820 map for OVMF backward compatibility
Tracked-On: #2792
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
While building the E820 map for UOS, [lowmem, lowmem_limit) and [5GB,
highmem) can be empty. Remove the empty entries if they appear.
Tracked-On: #2792
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
- fix comments
- update the first RAM region to [0, 0xA0000) because [0xA0000, 1MB) is
designated as video memory and ROM area
- use 2GB as lowmem_limit
Tracked-On: #2792
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Add the PCI MMIO fallback handler to the 64-bit PCI host aperture, so
that the guest won't inadvertently crash acrn-dm due to unhandled MMIO.
Tracked-On: #2792
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
- use strncmp() instead of comparing string pointers to make no
assumptions about the toolchain's literal pool
- re-shuffle the functions so they're consistent with mem.h
- make non-public functions static
- increase code re-use
Tracked-On: #2792
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Per commit dbd9ab07e1, GUEST_CFG_OFFSET is
no longer needed.
Tracked-On: #2792
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Physcial bdf is needed in hypervisor to find the right pci dev.
Tracked-On: #2788
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
This patch marks thre_int_pending as true when THR is empty.
Tracked-On: #2713
Signed-off-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Now it will call the below function to create the corresponding pci_device_iterator
in passthrough device initialization. But it is not released in time.
So it needs to be released to fix the memory leak issue.
Tracked-On: #2762
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Otherwise it causes the memory leak.
V1->V2: Fix the leak of pi->arg as gvt structure also needs to be released.
Tracked-On: #2762
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
It makes more sense by aligning directory name with board name.
Tracked-On: #2760
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Fix potential memory leakage in some error case handling.
Tracked-On: #2704
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Without memory barrier, the change of used ring index could not
immediately detected by FE, this would bring some problems.
For virtio-blk FE driver, when it receives an interrupt, and confirms the
used ring index has changed, it will first set ring flags with
VRING_AVAIL_F_NO_INTERRUPT, then get buffer from virtqueue, after
process this request, it will mask VRING_AVAIL_F_NO_INTERRUPT, and get
used ring index again before return. If used ring changes, it will
process it. At the same time, BE will read this flags before each notify,
if VRING_AVAIL_F_NO_INTERRUPT was set, BE will not inject interrupt.
Without memory barrier, before FE mask VRING_AVAIL_F_NO_INTERRUPT, BE
has finished notify without interrupt, then FE mask
VRING_AVAIL_F_NO_INTERRUPT, and get used ring index but failed (index
has changed from BE side). FE will return from interrupt handler
function, and wait for next interrupt which was not injected by BE. Thus,
this will cause kernel hung.
Tracked-On: #2732
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
This patch add one sample script to launch zephyr as guest.
Tracked-On: #2713
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Dynamic memory stored in 'net' allocated through function 'calloc'
should be freed correspondingly when return fail.
Tracked-On: #2704
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
check the power button acpi driver firstly, then find input event
corresponding to the power button.
Tracked-On: #2695
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There was a workaround in DM that allocates PCI 64bit mem bar in 32bit mem space
if the bar size is within 32MB.
After the workaround being removed, there is an issue to enter fastboot
mode for inappropriate handling of 64bit mem bar in guest driver.
The patch bring the workaround back, and skip the workaround when the guest
is booted by OVMF.
Revert the patch after the guest fixs the issue of handling 64bit mem bar in
fastboot mode.
Tracked-On: #2677
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Followed ACPI spec 4.8.2.5, if SCI_EN is set, the interrupt will be
routed to SCI interrupt logic. If SCI_EN is not set, the interrupt
will be routed to SMI interrupt logic.
ACRN does not support SMI for now, so check SCI_EN before trigger
SCI.
Tracked-On: #2560
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
when UOS is running, "acrnctl suspend vm" and "acrnctl stop vm" commands are
able to trigger a SCI interrupt, then UOS enters sleep or shutdown according
to the default behavior of the power button. The default behavior is based on
UOS power button setting.
Tracked-On: #2560
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
1G PCI hole is added just after 4G address which is used as the
PCI high MMIO address space. Guest high memory is mapped from 5G
address for both EPT and device model user space address. Guest
e820 table and API vm_map_gpa are updated accordingly.
Tracked-On: #2577
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Remove the >32MB limitation for 64bits mmio hole allocation, ACRN
hasn't met such buggy devices for this limitation. Besides, OVMF
has one bug which requires 64bits BAR must allocate from 4G+ address,
otherwise trigger assert. This patch can workaround it.
Tracked-On: #2577
Signed-off-by: Liu Shuo A <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Limit 64 bits PCI BAR space from 0x100000000UL ~ 0x140000000UL,
as HV now only support 0x400000000UL+0x80000000 as top of guest memory
address. EPT table size is static allocated.
Tracked-On: #2577
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
For virtio-based device, it needs to use virtio_base as the first member
otherwise, virtio_linkup will fail.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Currently, we are enforcing the _FORTIFY_SOURCE=2 without any
previous detection if the macro has been already defined, e.g.
by environment, or is just enabled by compiler by default on
some distributions (e.g. Gentoo).
This could result in the error like this:
<command-line>:0:0: error: "_FORTIFY_SOURCE" redefined [-Werror]
<built-in>: note: this is the location of the previous definition
Tracked-On: #2344
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
The patch changes runC container's default rootfs directory. In the patch
change the rootfs to runC bundle's parent directory. Because in ACRN we map
SOS rootfs to container so the rootfs is an empty directory, after move it to
parent directory all the container can share the same rootfs.
Tracked-On: #2020
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
The patch adds more Linux capabilities for runC container. In ACRN runC
we will map native root directory to the container, when we launch UOS from
container it need more Linux capabilities to operate dev node. So add the
capabilities in runC configuration file.
Tracked-On: #2020
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Change the default runC container start application to sh which will be
modified by launch_uos.sh during UOS boot. And the replacement is the
parameter set by "acrnctl add" command.
Tracked-On: #2020
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
This patch implements acrn-dm QoS. When the script be launched with "-C"
parameter, the acrn-dm will be executed in container for isolating the
resouce of service OS.
The QoS parameter is described in
/usr/share/acrn/samples/apl-mrb/runC.json, users can modify it following
their performance requirements.
Tracked-On: #2020
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Retrieve the encrypted attestation Keybox from CSE
and provision it to RPMB storage.
Tracked-On: #2604
Signed-off-by: Huang Yang <yang.huang@intel.com>
Signed-off-by: Wei Xinghai <xinghaix.wei@intel.com>
Signed-off-by: Chen Gang <gang.g.chen@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
When the backend completes a GPIO request, it returns a valid length
to ensure that response correct.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
if the gpio debug is enabled, print gpio mapping information about
virtual gpio and native gpio, also print virtio-gpio data, which shows
the gpio operations flow.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Implement gpio set/get value, direction input/output and set config operations.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
virtio framework implementation for virtio-based gpio virtualization.
virtio-based gpio uses one virtqueue to implement gpio operaions and
frontend gpio chip base and number are provided by virtio config.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Listen to power button state via /dev/input/event0. When the power
button is pressed, then set PWRBTN_STS bit. If PWRBTN_EN is set, the
sci interrupt is triggered.
For suspend or shutdown of UOS by power button, needs UOS to configure
the default behavior of the power button.
Tracked-On: #2560
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
patch is from Alex Du for IASL tool updated to support
ACPI 6.3 version.
Tracked-On: #2568
Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Socket is not currently supported as backend for virtio-console.
Kata containers require socket backend for virtio-console in order to
communicate between the agent running in the VM and the proxy running
in the host. In order to support Kata with ACRN, this feature is required.
v1-->v2:
Prevent new accepts on an already established socket connection. This
removes the need for accepted_fd and accept_evp varibles introduced in
previous patch.
v2-->v3:
Fixed coding style and removed debug prints.
Tracked-On: #2448
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
For UP2 releases, we don't need enable_initial_modeset, just as the NUC
platforms, so remove this parameter from the boot args.
Tracked-On: #2516
Signed-off-by: Min He <min.he@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Need to properly remove and free its MMIO entry during deinit.
Tracked-On: #2453
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
The dummy channels can emulate cbc lifecycle, cbc signal and cbc raw
channel instead canbox, and the feature can be enabled by ioc command
line within wakeup reason bit 24.
Tracked-On: #2481
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The ASL_COMPILER macro is hard coded as /usr/sbin/iasl, it is
complained by some developers. This patch changes it to a
flexible way, by which the following make command lines are
supported:
make
make devicemodel
make ASL_COMPILER=/path/to/iasl
make ASL_COMPILER=/path/to/iasl devicemodel
Tracked-On: #2298
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
This example script launch a VM with lapic passthrough for realtime scenarios.
Tracked-On: #2351
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
New option "--lapic_pt" added to create VM with local apic passthrough, for
realtime scenarios.
When the option is set, a VM is created with LAPIC_PASSTHROUGH.
The option is not set by default.
Tracked-On: #2351
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- don't generate io apic entry for vm with lapic pt.
Tracked-On: #2351
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Using 'make' directly means that the jobserver environment variables don't get
passed down, so sub-builds for example don't use -j.
This is documented as the wrong thing to do:
https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable
Use $(MAKE) instead, and compile times drastically improve:
acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s
Tracked-On: #2370
Signed-off-by: Ross Burton <ross.burton@intel.com>
For virtio-blk, when the backend is a regular file, the discard
and
is implemented by fallocate(), but this function will not wait for
the discard command handled by disk.
So, add fdatasync to make sure the DISCARD is executed
synchronously.
Tracked-On: #2395
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
vHPET is used as a source of system timer by UEFI (e.g. OVMF).
This provides an alternative to using vPIT, which OVMF assumes is always
connected to vPIC.
This is ported from Bhyve, with a few changes:
- move to user space, using acrn_timer
- enable timers only when necessary
Origin: FreeBSD
License: BSD-3-Clause
URL: https://svnweb.freebsd.org/
commit: 326257
Purpose: Adding vHPET support.
Maintained-by: External
Tracked-On: #2319
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
It is possible for multiple timeouts to occur in one mevent epoll
iteration. Providing the number of timer expirations to the timer
callback handlers can be useful. E.g., this could improve emulation of
timing-sensitive hardware components.
Tracked-On: #2319
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Allow specifying the initial expiration in absolute time.
Tracked-On: #2319
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
It was designed to be used in non-blocking mode to prevent the mevent
thread from blocking itself indefinitely, but it was created in
blocking mode.
Tracked-On: #2319
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Under sharing mode, VM0 is identical with SOS VM. But the coupling of
SOS VM and VM 0 is not friendly for partition mode.
This patch is a pure term change of vm0 to sos VM, it does not change
any code logic or senmantic.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently, we support SBL on two different boards.
So build and install them all in E2E build.
Tracked-On: #2344
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
For the upstream purpose the device file of /dev/acrn_vhm is renamed
to /dev/acrn_hsm. Correspondingly the path of offline CPU is also changed.
So the device file of /dev/acrn_hsm is checked to configure the path
of ooffline VCPU.
Tracked-On: projectacrn/acrn-hypervisor#2356
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Currently VHM driver is opened by using the device file of /dev/acrn_vhm.
But for the upstream purpose it is renamed to /dev/acrn_hsm.
So we need to check that the device file is acrn_vhm or acrn_hsm and then
open the VHM driver.
Tracked-On: projectacrn/acrn-hypervisor#2356
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Adding this parameter so that it could provide more info when
kernel panic happens. And this has almost no overhead as it only
uses several existing kernel APIs.
The 0x1f is a bitmask for type of info to be dumped, and it means
it will print task/memory/timer/lock/ftrace info when panic happens.
Tracked-On: #2330
Signed-off-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
The issue leads that the IOC mediator's fd is turned off
incorrectly, causing the IOC mediator to fail.
The root cause is because after closing fd is not set
to an invalid fd.
The issue can be reproduced by the S3 stress test.
Tracked-On: #2301
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The issue will result in the loss of wakeup reason and signal
data, because the CBC header was not added when generating the
tx package.
Tracked-On: #2283
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There's a DP port on UP2 board, so we cannot add video=DP-x:d paramter,
otherwise, DP monitors will not be able to be detected on UP2 boards.
Tracked-On: #2268
Signed-off-by: Min He <min.he@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Currently whether audio works in virtio mediator or pass-through mode can be determined
by checking the device file of vbs_k_audio
But before the completion of loading audio virtio-BE module, the device file of /dev/vbs_k_audio
doesn't exist. In such case in course of loading UOS, the incorrect work mode is selected
for audio device (passthru instead of mediator). This is incorrect
Tracked-On: projectacrn/acrn-hypervisor#2247
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Alek Du <alek.du@intel.com>
UP2 don't have ioc, there is no need to simulate it.
Tracked-On: #1995
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Array index of "vbdp_devs" may be out of bounds if
"i >= XHCI_MAX_VIRT_PORTS", so index checking is necessary.
Tracked-On: #1252
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Clear Linux complains about not being able to write the bit to PM1A:
ACPI Error: Could not enable RealTimeClock event (20180531/evxfevnt-184)
Tracked-On: #2176
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Clear Linux complains about not finding RTC as a PNP device:
platform rtc_cmos: registered platform RTC device (no PNP device found)
This is a port of Bhyve vRTC's user-space logic.
Tracked-On: #2176
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Expose a new ACPI table PSDS to UOS.
This PSDS table show the security capability of the VM.
Only enable this table in UOS when PSDS presented in SOS.
Tracked-On: #888
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The possible memory leak was introduced by commit
7fce2462a0
If mevent add fails in virtio mei, the resource allocated doesn't
be released. This patch fix this memory leak issue.
Tracked-On: #1877
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
To avoid the race issue for mevent in uart, we introduce the
teardown callback to handle resource free case.
Tracked-On: #1877
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Make uart_init and uart_deinit internal functions. And make
uart_set_backend/uart_release_backend cover uart_init/uart_deinit
function.
This will make mevent teardown callback adding easier for uart_core.
Tracked-On: #1877
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
We will mark ioreq as COMPLETE in VHM via IC_NOTIFY_REQUEST_FINISH
ioctl. vm_notify_request_done can do it. So remove this one.
Tracked-On: #1821
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
VHM will provide a ioctl to clear all IO requests' status. This is
useful to handle ioreqs in VM normal reboot and emergency reboot.
Tracked-On: #1821
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Also remove the '\n' from the hugetlb's file name.
Tracked-On: #2133
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
The patch fix some string operations issues and also improve readability
of several snippet.
Tracked-On: #2133
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Discard the input/output data when open tty file. To avoid the
mevent callback is triggered immediately when the fd is added to
epoll.
Also update the uart_drain only read the data from tty file when
fifo has available space.
Tracked-On: #2159
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
As VIRTIO_CONFIG_S_NEEDS_RESET is not defined in standard virtio header
file on ubuntu, there will be compile issue. so add
VIRTIO_CONFIG_S_NEEDS_RESET to fix it.
Tracked-On: #2145
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Reuse linux common virtio header file and remove the repetitive
definition.
Tracked-On: #2145
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Physical NIC mac address is used for generate UOS mac address.
This patch uses a new parameters to pass this information
instead of vm name.
Tracked-On: #1987
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
S3 emulation is complicated and greatly dependent on system timing,
hence this patch changes log level for some important logs to help
online debugging (could output log by modifing launch_uos.sh and
without re-compiling)
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Now one macro is added to define the alignment requirement.
>#define __aligned(x) __attribute__((aligned(x)))
Some code uses the __aligned(x) to define the alignment while the other
code uses the original alignment definition.
So they are unified.
Tracked-On: projectacrn/acrn-hypervisor#2131
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Release the resource reqeusted during msix table init if error occurs.
Change the type of the second arg of deinit_msix_table from pci_vdev to ptdev,
to align with init_msix_table.
Tracked-On: #1782
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Currently, the emulation of pci msi/msix can be handled by hypervisor code.
The logic in dm passthru driver can be simplified.
This patch remaps msix table to usersapce in DM passthru driver.
1. The access to the msix table in passthru driver will be trapped, and emulated by hv code.
2. The access to the config space in passthru driver will be trapped, and emulated by hv code.
So dm passthru driver no longer needs to keep the whole logic of handling msi/msix.
No need to do msix table remapping in sos kernel.
After the patch, the msix table ioremap code in vhm_dev.c can be removed.
Tracked-On: #1782
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Support DISCARD command is meaningful when eMMC usage is high or
there are lots of remove operations. For example, when Guest
Android is running, there will be lots of files being created and
removed. However, virtio-blk BE does not support DISCARD command,
data remove operation in UOS will not trigger erase in eMMC. After
period of time, the eMMC will be consumed out, and erase must be
done by eMMC firmware before writing any new data. This causes the
eMMC performance decrease in the whole system (SOS and UOS).
To solve the problem, DISCARD should be supported in virtio-blk BE.
Tracked-On: #2011
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
To keep consistent with kernal code, change delete to discard.
Tracked-On: #2011
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Replace sscanf in device model hw directory
Tracked-On: #2079
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Replace strlen function with strnlen function in device-model
Tracked-On: #2079
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Replace function sprintf with snprintf in device model
Tracked-On: #2079
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This is an obvious bug, which releases memory but still access the
data on the released memory. It is risky operation, and may result
failing to do normal enumlation process. This patch is used to fix
it.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The USB S3 virtualization logic is complicated and heavily affected by system
timing. To make the debugging work easily, change related log level to facilitate
quick bug fixing.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When issue happen, we could identify which thread is impacted.
This could help stability issue debugging.
Tracked-On: #2037
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
irqfd only supports msix devices. In the current code a mevent is
added to poll the callfd from userspace to support intx devices.
This patch removes the support for non-msix devices since they are
not used in the current device model.
Tracked-On: #1877
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Teardown callback is provided when mevent_add is called and it is
used to free the virtio-net resources.
Tracked-On: #1877
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Teardown callback is provided when mevent_add is called. A ref_count
is added to virtio_console data structure. Teardown callback needs to
free the resources of the backend and when the ref_count of the
virtio_console is zero the whole virtio-console is freed.
Tracked-On: #1877
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Teardown callback is provided when mevent_add is called and it is
used to free the virtio-input resources.
Tracked-On: #1877
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
On Intel Apllo Lake platform, the VBus will drop after the SOC suspended,
hence during the SOS resuming process, there will be a disconnecting event
and a connecting event sent to each native USB device in order.
This patch will use new strategy for S3 resuming emultion.
1. The DM set PORTSC register to 'no device attached' state when S3
suspending started,
2. SOS resuming starts and do nothing for device disconnecting event,
3. 'Cache' device connecting event and don't report it to UOS,
4. UOS believe no device attached due to PORTSC register state and
begin to clear the resource allocated for the device before S3
suspending,
5. DM receives the Disable Slot command from UOS and report the 'cached'
device connecting event to UOS, hence trigger the emulation behavior
for the device.
The purpose of this strategy is to let UOS resuming proceed as quickly as
possible, which means the UI will be turned on quickly to user.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
According to xHCI spec 5.4.1.1, this command hasn't ask to clear
PORTSC for R/S handling. So the PORTSC should always present the
physical usb bus status.
The old implementation changes the PORTSC according whether the
pci_xhci_dev_emu struct is allocated, it is not consistent with
spec and this patch is used to fix it.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Comparing two USB devices' path is frequently used operation, abstract
it as an seperated function for convenience.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This workaround will delay the UOS resuming for 5 seconds, this
behavior is not right and should be replaced by dynamic style.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There are several KW issues which uninitialized variables
are used. This patch will fix those KW issues.
Signed-off-by: weideng <wei.a.deng@intel.com>
Signed-off-by: yingbinx <yingbinx.zeng@intel.com>
In USB mediator, sscanf, strtok and atoi API is banned, so replace them
with permitted API function.
Tracked-On: #1254
Signed-off-by: Yang Liang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Always enforce data size when using BAR access functions.
Currently, the size serves as a hint to the BAR access functions and
these functions are expected to behave accordingly. Some of the access
functions, e.g. virtio ones, don't always truncate the data but expect
the caller to take care of the data size. This causes problems with
OVMF's virtio drivers during I/O instruction emulation because RAX can
contain junk bits that shouldn't be written to the device.
v1 -> v2:
- improve readability
Tracked-On: #1935
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Use '--ovmf <OVMF image location>' when launching acrn-dm.
Tracked-On: #1832
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Generic infrastructure for loading BIOS/ROM and providing EPT pages at
High BIOS region.
The size of High BIOS is rounded up to a multiple of 2MB.
v2 -> v3:
- refine mmap_hugetlbfs* to reduce code replication
v1 -> v2:
- make this code generic instead of OVMF-specific
Tracked-On: #1832
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This is preparation for the upcoming High BIOS work.
Tracked-On: #1832
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
A sample args file is added, which will be linked to /usr/share/acrn/conf/add/[vmname].args at integration time.
Because it is needed for AaaG one-key startup enabled build.
Tracked-On: #2040
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
The current vmcfg uses the default values in Kconfig when a previous .config
does not exist. This leads to additional complexity to silentoldconfig.py which
has different logic depending on the environment variable 'BOARD'. This also
blocks the effort to make the top-level Makefile recognize BOARD because any
environment variable set in the top-level Makefile cascades to the other
Makefiles, leading the work around above to fail.
This patch introduces a generic defconfig for vmcfg and simplifies
silentoldconfig.py to always fail when neither .config nor the specified
defconfig exists.
Tracked-On: #1995
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Physical NIC mac address is used for generate UOS mac address.
This patch uses a new parameters to pass this information
instead of vm name.
Tracked-On: #1987
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
