Handle the PIO reset register that is defined in host ACPI:
Parse host FADT table to get the host reset register info, and emulate
it for Service OS:
- return all '1' for guest reads because the read behavior is not defined
in ACPI.
- ignore guest writes with the reset value to stop it from resetting host;
if guest writes other values, passthru it to hardware in case the reset
register supports other functionalities.
Tracked-On: #2700
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements triple fault vmexit handler and base on VM types:
- post-launched VMs: shutdown_target_vm() injects S5 PIO write to request
DM to shut down the target VM.
- pre-launched VMs: shut down the guest.
- SOS: similarly, but shut down all the non real-time post-launched VMs that
depend to SOS before shutting down SOS.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- post-launched RTVM: intercept both PIO ports so that hypervisor has a
chance to set VM_POWERING_OFF flag.
- all other type of VMs: deny these 2 ports from guest access so that
guests are not able to reset host.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For pre-launched VMs and SOS, VM shutdown should not be executed in the
current VM context.
- implement NEED_SHUTDOWN_VM request so that the BSP of the target VM can shut
down the guest in idle thread.
- implement shutdown_vm_from_idle() to shut down target VM.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1) According SDM Vol 3, Chap 29.1.2, Any VM exit caused by TPR virtualization
is trap-like: the instruction causing TPR virtualization completes before the VM
exit occurs (for example, the value of CS:RIP saved in the guest-state area of
the VMCS references the next instruction). So we need to retain the RIP.
2) The previous implement only consides the situation the guest will reduce the
TPR. However, the guest will increase it. So we need to update the PPR before we
find a deliverable interrupt. For examples: a) if the guest increase the TPR before
a irq windows vmexit, we need to update the PPR when check whether there has a pending
delivery interrupt or not; b) if the guest increase the TPR, then an external irq raised,
we need to update the PPR when check whether there has a deliverable interrupt to inject
to guest.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
For prelaunched VM, Service OS and postlaunched RT VM, we only need the vRTC
provides backed-up date, so we could use the simple vRTC which implemented
in hypervisor. For postlaunched VM (which is not a RT VM), we needs the device
module to emulate the vRTC for it.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Previously we use Kconfig of DMAR_PARSE_ENABLED to choose pre-defined DMAR info
or parse it at runtime, at the same time we use MACRO of CONFIG_CONSTANT_ACPI
to decide whether parse PM related ACPI info at runtime. This looks redundant
so use a unified ACPI_PARSE_ENABLED Kconfig to replace them.
Tracked-On: #3107
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
now there are 2 static_checks.c,
./arch/x86/static_checks.c
./common/static_checks.c
they are used for static checks when build time,
this check should not belong to any HV layer from
modularization view, then add and move it to pre_build folder.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
modified: Makefile
deleted: common/static_checks.c
renamed: arch/x86/static_checks.c -> pre_build/static_checks.c
There're some instructions which not support bit 0(w bit) flag but which
memory opcode size is fixed and the memory opcode size is not equal to the
register opcode size. In our code, there is movzx (which opcode is 0F B7)
which memory opcode size is fixed to 16 bits. So add a flag VIE_OP_F_WORD_OP
to indicate a instruction which memory opcode size is fixed to 16 bits.
Tracked-On: #1337
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
This patch refines 'init_percpu_lapic_id' to move the error
handling to 'init_pcpu_pre'.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
This patch adds default DRHD MACROs in template platform acpi info.
It is the preparation patch to remove dynamic memory allocation
in dmar_parse.c. So that the dmar info can be initialized with
default size and values when CONFIG_DMAR_PARSE_ENABLED is set
to y.
v1 -> v2: no change
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Add MSR_IA32_MISC_ENABLE to emulated_guest_msrs to enable the emulation.
Init MSR_IA32_MISC_ENABLE for guest.
Tracked-On: #2834
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
According to SDM Vol4 2.1, modify vcpuid according to msr ia32_misc_enable:
- Clear CPUID.01H: ECX[3] if guest disabled monitor/mwait.
- Clear CPUID.80000001H: EDX[20] if guest set XD Bit Disable.
- Limit the CPUID leave maximum value to 2 if guest set Limit CPUID MAXVal.
Tracked-On: #2834
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Guest MSR_IA32_MISC_ENABLE read simply returns the value set by guest.
Guest MSR_IA32_MISC_ENABLE write:
- Clear EFER.NXE if MSR_IA32_MISC_ENABLE_XD_DISABLE set.
- MSR_IA32_MISC_ENABLE_MONITOR_ENA:
Allow guest to control this feature when HV doesn't use this feature and hw has no bug.
vcpuid update according to the change of the msr will be covered in following patch.
Tracked-On: #2834
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Merge two parts of different definitions for MSR_IA32_MISC_ENABLE fields.
- use the prefix "MSR_IA32_" to align with others
- Change MSR_IA32_MISC_ENABLE_XD to MSR_IA32_MISC_ENABLE_XD_DISABLE to
align the meaning of the filed since it is "XD bit disable"
Use UL instead of U as the filed bit mask because MSR_IA32_MISC_ENABLE is 64-bit.
Tracked-On: #2834
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The interface struct & API changes like below:
struct uefi_context->struct depri_boot_context
init_firmware_operations()->init_vboot_operations()
init_firmware()->init_vboot()
firmware_init_irq()->init_vboot_irq()
firmware_get_rsdp()->get_rsdp_ptr()
firmware_get_ap_trampoline()->get_ap_trampoline_buf()
firmware_init_vm_boot_info()->init_vm_boot_info()
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
currently, ACRN hypervisor can either boot from sbl/abl or uefi, that's
why we have different firmware method under bsp & boot dirs.
but the fact is that we actually have two different operations based on
different guest boot mode:
1. de-privilege-boot: ACRN hypervisor will boot VM0 in the same context as
native(before entering hypervisor) - it means hypervisor will co-work with
ACRN UEFI bootloader, restore the context env and de-privilege this env
to VM0 guest.
2. direct-boot: ACRN hypervisor will directly boot different pre-launched
VM(including SOS), it will setup guest env by pre-defined configuration,
and prepare guest kernel image, ramdisk which fetch from multiboot modules.
this patch is trying to:
- rename files related with firmware, change them to guest vboot related
- restruct all guest boot stuff in boot & bsp dirs into a new boot/guest dir
- use de-privilege & direct boot to distinguish two different boot operations
this patch is pure file movement, the rename of functions based on old assumption will
be in the following patch.
Changes to be committed:
modified: ../efi-stub/Makefile
modified: ../efi-stub/boot.c
modified: Makefile
modified: arch/x86/cpu.c
modified: arch/x86/guest/vm.c
modified: arch/x86/init.c
modified: arch/x86/irq.c
modified: arch/x86/trampoline.c
modified: boot/acpi.c
renamed: bsp/cmdline.c -> boot/cmdline.c
renamed: bsp/firmware_uefi.c -> boot/guest/deprivilege_boot.c
renamed: boot/uefi/uefi_boot.c -> boot/guest/deprivilege_boot_info.c
renamed: bsp/firmware_sbl.c -> boot/guest/direct_boot.c
renamed: boot/sbl/multiboot.c -> boot/guest/direct_boot_info.c
renamed: bsp/firmware_wrapper.c -> boot/guest/vboot_wrapper.c
modified: boot/include/acpi.h
renamed: bsp/include/firmware_uefi.h -> boot/include/guest/deprivilege_boot.h
renamed: bsp/include/firmware_sbl.h -> boot/include/guest/direct_boot.h
renamed: bsp/include/firmware.h -> boot/include/guest/vboot.h
modified: include/arch/x86/multiboot.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace the vm state VM_STATE_INVALID to VM_POWERED_OFF.
Also replace is_valid_vm() with is_poweroff_vm().
Add API is_created_vm() to identify VM created state.
Tracked-On: #3082
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
vm_config.h has included types.h/acrn_common.h/vm_configurations.h,
acrn_common.h has included types.h, so remove the redundant includes;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
The MACRO of CONFIG_CONSTANT_ACPI will be defined per scenario usage,
so move it from Kconfig to vm_configurations.h;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously ACPI PM1A register info was hardcoded to 0 in HV for generic boards,
but SOS still can know the real PM1A info so the system would hang if user
trigger S3 in SOS. Enabling PM1A register info fixup will let HV be able to
intercept the operation on PM1A and then make basic function of S3 work for
all boards;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IRTE is freed if ptirq entry is released from remove_msix_remapping() or
remove_intx_remapping(). But if it's called from ptdev_release_all_entries(),
e.g. SOS shutdown/reboot, IRTE is not freed.
This patch adds a release_cb() callback function to do any architectural
specific cleanup. In x86, it's used to release IRTE.
On VM shutdown, vpci_cleanup() needs to remove MSI/MSI-X remapping on
ptirq entries, thus it should be called before ptdev_release_all_entries().
Tracked-On: #2700
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename 'type' in struct io_request to 'io_type' to be more readable.
Tracked-On: #3061
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This commmit added one more guest VM to the industry scenario, to
be aligned with the HLD for the industry usage.
With this commit, 4 VMs could be launched at maximum: 1 SOS VM and 3 post-launced VM.
Tracked-On: #3039
Signed-off-by: Yan, Like <like.yan@intel.com>
Rename structure acrn_vm_type to acrn_vm_load_order as it is used to
indicate the load order instead of the VM type.
Tracked-On: #2291
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Shared buffer is allocated by VM and is protected by SMAP.
Accessing to shared buffer between stac/clac pair will invalidate
SMAP protection.This patch is to remove these cases.
Fix minor stac/clac mis-usage,and add comments as stac/clac usage BKM
Tracked-On: #2526
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This scenario is typical for industry usage with 3 VMs: 1 pre-launched SOS VM,
1 post-launched user VM for HMI and 1 post-launched RT VM for real-time control.
Tracked-On: #3039
Signed-off-by: Yan, Like <like.yan@intel.com>
The DRHD MACROs are needed only when CONFIG_DMAR_PARSE_ENABLED set to n,
whereas the template platform_acpi_info.h is prepared for generic boards
that usually CONFIG_DMAR_PARSE_ENABLED is set to y, so remove these dummy
DRHD info MACROs.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hypervisor/arch/x86/configs/($CONFIG_BOARD) will store Board specific configs,
add a generic folder to store configs for generic boards that they can share
one build binary with minimal and common features in some scenarios like SDC.
Please be aware that BDF of pci devices are different on each board, so one
binary for LOGICAL_PARTITION scenario is not supported.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The name NORMAL_VM does not clearly reflect the attribute that these VMs
are launched "later". POST_LAUNCHED_VM is closer to the fact
that these VMs are launched "later" by one of the VMs launched by ACRN.
Tracked-On: #3034
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1) For some instructions (like movsx, movzx which we support), there're two operands
and the source operand size is not equal to the dest operand size. In this case,
if we update the memory operand size according to the bit 0(w bit) of opcode,
we will lost the register operand size. This patch tries to fix this by calculating
memory operand size when we want to use it.
2) Calculate memory operand size form operand size and the bit 0(w bit) of opcode
when we want to operate on memory operand.
Tracked-On: #1337
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- The pci device config is related to VM configurations, so move the device
mapping MACROs from pci_devices.h to vm_configurations.h. Also considering
pci_devices.h should be generated by offline parse tool, this code change
would decouple the relationship between VM configuration tool and target
paser tool;
- Another minor change is add post-fix in number for each PCI device subclass
name to make target parse tool interface friendly;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As SHARING_MODE and PARTITION_MODE are not used anymore, cleanup the
code.
Tracked-On: #2291
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If the vmcall param passed from guest is representing a vmid, we should
make sure it is a valid one because it is a pre-condition of following
get_vm_from_vmid(). And then we don't need to do NULL VM pointer check
in is_valid_vm() because get_vm_from_vmid() would never return NULL.
Tracked-On: #2978
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are 2 reasons why SOS ve820 has to be separated from host e820:
- in hybrid mode, SOS may not own all the host memory.
- when SOS is being re-launched, it needs an untainted version of host
e820 to create SOS ve820.
This patch creates sos_e820 table for SOS and keeps host e820 intact
during SOS creation.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In previous code, only for pre-launched VM, hypervisor would create
vuart console for each VM. But for post-launched VM, no vuart is
created.
In this patch, create vuart according to configuration in structure
acrn_vm_config. As the new configuration is set for pre-launched VM and
post-launched VM, and the vuart initialize process is common for each
VM, so, remove CONFIG_PARTITION_MODE from vuart related code.
Tracked-On: #2987
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add vuart config in acrn_vm_config struct, support configuring 2 vuarts for
each VM. The first vuart is used to work as VM's console. The second vuart
is used to connect to other VM's vuart. When the port base for a vuart
is set to 0, hypervisor will not create this vuart.
Tracked-On: #2987
Signed-off-by: Victor Sun <victor.sun@intel.com>
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The guest flags of GUEST_FLAG_IO_COMPLETION_POLLING work for NORMAL_VM only;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
According to SDM 10.6.1, if dest fields is 0xffU for register
ICR operation, that means the IPI is for broadcast.
According to SDM 10.12.9, 0xffffffffU of dest fields for x2APIC
means IPI is for broadcast.
We add new parameter to vlapic_calc_dest() to show whether the
dest is for broadcast. For IPI, we will set it according to
dest fields. For ioapic and MSI, we hardcode it to false because
no broadcast for ioapic and MSI.
Tracked-On: #3003
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It is better to use an unified MACRO. So, this patch moves AP_MASK to cpu.h
and removes the defination of the MACRO spanning different source files.
Tracked-On: #2991
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch just removes unnecessary indent before #include in pm.c.
Tracked-On: #2991
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds prefix 'p' before 'cpu' to physical cpu related functions.
And there is no code logic change.
Tracked-On: #2991
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
the problem is : System will crash when run crashme.
The root cause of this problem is that when the ACRN_REQUEST_EXCP flag is set by calling
the vcpu_make_request function, the flag is not cleared.
Add the following statement to the vcpu_inject_exception function to fix the problem:
bitmap_test_and_clear_lock(ACRN_REQUEST_EXCP, &vcpu->arch.pending_req);
Tested that one night, there was no crash.
Tracked-On: #2527
Signed-off-by: bing.li<bingx.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@intel.com>
In theory, we should trap out all the x2apic MSR access if APICv is not enabled.
When "Use TPR shadow" and "Virtualize x2APIC mode" are enabled, we could disable
TPR interception; when APICv is fully enabled, besides TPR, we could disable all
MSR read, EOI and self-IPI interception; when we pass through lapic to guest, we
could disable all the MSR access interception except XAPICID/LDR read and ICR write.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
