When in fully APICv mode, we enable VID. All pending delivery interrupts
will inject to VM before VM entry. So there is no pending delivery interrupt.
However, if VID is not enabled, we can only inject pending delivery interrupt
one by one. So we always need to do this check.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
apicv_advanced_inject_intr is used if APICv fully features are supported,
it uses PIR to inject interrupt. otherwise, apicv_basic_inject_intr is used.
it will use VMCS INTR INFO field to inject irq.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
The APICv ops is decided once the APICv feature on the physical platform is detected.
We will use apicv_advanced_ops if the physical platform support fully APICv feature;
otherwise, we will use apicv_basic_ops.
This patch only wrap the accept interrupt API for them.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
The physical core of lapic_pt vm should be reset for security and
correctness when shutdown the vm.
Tracked-On: #2991
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch makes the following changes:
- Add one parameter 'mask' to start_cpus for later use.
- Set cpu state as DEAD instead of dead loop when fail to start cpu.
- Panic when there are any failures when start cpus in init_cpu_post and host_enter_s3.
Tracked-On: #2991
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently vpid is not released in reset_vcpu() hence the vpid resource
could be exhausted easily if guests are re-launched.
This patch assigns vpid according to the fixed mapping of runtime vm_id
and vcpu_id to guarantee the uniqueness of vpid.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- The target vm in most of hypercalls should be a NORMAL_VM, in some
exceptions it might be a SOS_VM, we should validate them.
- Please be aware that some hypercall might have limitation on specific
target vm like RT or SAFETY VMs, this leaves "TODO" in future;
- Unify the coding style:
int32_t hcall_foo(vm, target_vm_id, ...)
{
int32_t ret = -1;
...
if ((is_valid_vm(target_vm) && is_normal_vm(target_vm)) {
ret = ....
}
return ret;
}
Tracked-On: #2978
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add TPR below threshold implement for "Virtual-interrupt delivery" not support.
Windows will use it to delay interrupt handle.
Complete all the interrupts in IRR as long as they are higher priority than
current TPR. Once current IRR priority is less than current TPR enable TPR
threshold to IRR, so that if guest reduces the TPR threshold, it would be good
to take below TPR threshold exit and let interrupts to go thru.
Tracked-On: #1842
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Enable vMCE feature to boot windows guest.
vMCE is set in EDX from Microsoft TLFS spec, to support windows guest
vMCA and vMCE should be supported by guest CPUID.
Support MSR_IA32_MCG_CAP and MSR_IA32_MCG_STATUS reading when vMCE is enabled,
but they are not emulated yet, so return 0 directly.
Tracked-On: #1867
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the presence of SOS, ACRN uses fallback_iommu_domain which is the same
used by SOS, to assign domain to devices during ACRN init. Also it uses
fallback_iommu_domain when DM requests ACRN to remove device from UOS domain.
This patch changes the design of assign/remove_iommu_device to avoid the
concept of fallback_iommu_domain and its setup. This way ACRN can commonly
treat pre-launched VMs bringup w.r.t. IOMMU domain creation.
Tracked-On: #2965
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
ACRN builds mptable for pre-launched VMs. It uses CONFIG_PARTITION_MODE
to compile mptable source code and related support. This patch removes
the macro and checks if the type of VM is pre-launched to build mptable.
Tracked-On: #2941
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently VM id of NORMAL_VM is allocated dymatically, we need to make
VM id statically for FuSa compliance.
This patch will pre-configure UUID for all VMs, then NORMAL_VM could
get its VM id/configuration from vm_configs array by indexing the UUID.
If UUID collisions is found in vm configs array, HV will refuse to
load the VM;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Return true if vm configs is sanitized successfully, otherwise return false;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The code mixed the usage on term of UUID and GUID, now use UUID to make
code more consistent, also will use lowercase (i.e. uuid) in variable name
definition.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We could call vlapic API directly, remove vlapic_rdmsr/wrmsr to make things easier.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Now the io_emul.c is relates with arch,io_req.c is common,
move some APIs from io_emul.c to io_req.c as common like these APIs:
register_pio/mmio_emulation_handler
dm_emulate_pio/mmio_complete
pio_default_read/write
mmio_default_access_handler
hv_emulate_pio/mmio etc
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move ‘emul_pio[]/default_io_read/default_io_write’
from struct vm_arch to struct acrn_vm
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- this api is related with arch_x86, then move to x86 folder
-- rename 'set_vhm_vector' to 'set_vhm_notification_vector'
-- rename 'acrn_vhm_vector' to 'acrn_vhm_notification_vector'
-- add an API 'get_vhm_notification_vector'
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN uses CONFIG_PARTITION_MODE macro to compile out CPU_IRQ_ENABLE/DISABLE
APIs. With vector remapping enabled for pre-launched VMs, this is of no use.
And for VMs with LAPIC pass-thru, interrupts stay disabled in vmexit loop
with the help of is_lapic_pt() API.
Tracked-On: #2903
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously we use unified vm_config.c for all scenarios and use MACROs
for each configuration items, then the initialization of vm_configs[]
becomes more complicated when definition of MACROs increase, so change
the coding style that all configurable items could be explicitly shown in
vm_configuration.c to make code more readable.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add, update '@return' and '@retval' statements to the API descriptions related
to vCPU operations.
Tracked-On: #1844
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
As vector re-mapping is enabled for pre-launched/partition mode VMs,
there is no more need for separate interrupt routine i.e.
partition_mode_dispatch_interrupt.
Tracked-On: #2879
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
For pre-launched VMs MSI/MSI-x configuration writes are not intercepted by ACRN.
It is pass-thru and interrupts land in ACRN and the guest vector is injected into
the VM's vLAPIC. With this patch, ACRN intercepts MSI/MSI-x config writes and take
the code path to remap interrupt vector/APIC ID as it does for SOS/UOS.
Tracked-On: #2879
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
This patch mainly does the following:
- Replace prefix RT_VM_ with VIRTUAL_.
- Remove the check of "addr != RT_VM_PM1A_CNT_ADDR" as the handler is specific for this addr.
- Add comments about the meaning of return value.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Intel SDM Vol3 23.8 says:
The INIT signal is blocked whenever a logical processor is in VMX root operation.
It is not blocked in VMX nonroot operation. Instead, INITs cause VM exits
So, there is no side-effect to send INIT signal regardless of pcpu active status.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
After using get_vm_from_vmid(), vm pointer is always not NULL. But there are still many NULL pointer checks.
This commit replaced the NULL vm pointer check with a validation check which checks the vm status.
In addition, NULL check for pointer returned by get_sos_vm() and get_vm_config() is removed.
Tracked-On: #2520
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously the vm_configs[] is defined separately for sharing mode and
partition mode, but the concept of hypervisor mode will be removed. Instead
we will introduce scenario Kconfig for hypervisor to load different vm
configurations.
SDC(Software Defined Cockpit) is a typical scenario that ACRN supported
so we introduce this scenario for previously sharing mode and move its
configurations to scenarios/sdc folder. The configuration could be used
for all boards reference.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add the default handlers for PIO and MMIO access which returns all
FFs on read and discards write. These default handlers are registered
when SOS VM or pre-launched VM is created.
v3 -> v4:
- use single layer if in hv_emulate_pio
- change the implementation of pio_default_read
v2 -> v3:
- use runtime vm type instead of CONFIG_PARTITION_MODE
- revise the pio/mmio emulation functions
- revise the pio/mmio default read functions according to MISRA C
- revise the commit message
v1 -> v2:
- add default handlers members in struct acrn_vm and add interfaces
to register default handlers for PIO and MMIO.
Tracked-On: #2860
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This API is only for kick vcpu out of non-root mode when
RTVM poweroff by itself. And the first caller will soon come
along with the next patch.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We set the vm state as VM_POWERING_OFF when RTVM is trying to poweroff by itself.
We will check it when trying to pause vCPUs of RTVM. Only if vm state equal to
VM_POWERING_OFF, we take action to pause the vCPUs of RTVM. Otherwise, we will
reject the pause request.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
The virtual pm port of RTVM is intercepted by HV. But the HV needs to inform the DM as well.
So we will forward the virtual S5 request to DM too
The handler in HV just set the pm state flag (VM_POWERING_OFF) which indicate that the RTVM is powering
off by itself. Meanwhile, there are data resources in VHM and DM should be released once we handle the PM
of RTVM in HV. So, return to DM to go through the entire VM destroy cycles to release the resources.
During the cycles, the DM will try to pause vm through hypercall. In the hypercall handler in HV, we will
check the pm state flag. If it is set, pause all the vCPUs of the vm. Otherwise, reject the request.
In this way, we can make sure that RTVM can only trigger its s5 by itself. All
other S5 request from external will be rejected.
Here is sequence chart of RTVM s5.
poweroff
+-----------+ +----------+ +-----------+ +----------+
| vBSP | | vAPs | | HV | | DM |
+-----+-----+ +----------+ +-----+-----+ +-----+----+
| | | |
| Stop all other cpus | | |
+----------------------------+ | |
| | |Disable LAPIC | |
| +<-+ | |
| | | |
| +--+ | |
| | |HLT in | |
| All other cpus stopped | |non-root mode | |
+----------------------------+ | |
| Call ACPI method to enter s5 | |
+-------------------------+---------------------> | |
| | Set s5 flag | |
| | <---------------------+ |
| | APs paused | Re-inject IOREQ TO DM
| | +-------------------> +-------------------> +
| | | Pause VM |
| | Check S5 flag: | <-------------------+
| | - If set, pause vm | VM paused |
| | - If no, reject | +-----------------> +--+
| | | Destroy VM | |Deinit works
| | | <--------------------<-+
| | | VM destroyed |
| | | +-----------------> |
+ + + +
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
This patch makes io_read_fn_t return true or false instead of void.
Returning true means that the handler in HV process the request completely.
Returning false means that we need to re-inject the request to DM after
processing it in HV.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
This patch makes io_write_fn_t return true or false instead of void.
Returning true means that the handler in HV process the request completely.
Returning false means that we need to re-inject the request to DM after
processing it in HV.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch checks if the GUEST_FLAG_RT is set when GUEST_FLAG_LAPIC_PASSTHROUGH is set.
If GUEST_FLAG_RT is not set while GUEST_FLAG_LAPIC_PASSTHROUGH is set, we will refuse
to boot the VM.
Meanwhile, this patch introduces a new API is_rt_vm.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In hypervisor fuzzing test, hypervisor will hang
if issuing HV_VM_SET_MEMORY_REGIONS hypercall after
target VM is destroyed.
this patch is to fix above vulnerability.
Tracked-On: #2849
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The vm_config in hypervisor restricted VM name size to
MAX_CONFIG_NAME_SIZE (32 bytes). When UOS is launched by DM, the vmname
is passed in as the last optional args, we hope to to copy it to vm_config
in the future. So the size of vmname in DM args should be restricted to
MAX_CONFIG_NAME_SIZE, too. Because MAX_CONFIG_NAME_SIZE will be used by DM,
we move it from vm_config.h to acrn_common.h
We also rename MAX_CONFIG_NAME_SIZE to MAX_VM_OS_NAME_LEN, because it will
be used by another components, should has a clear name.
Tracked-On: #2851
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Since we always enable "Use TPR shadow", so operate on TPR will not
trigger VM exit. So remove these APIs.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Re-organize the code to remove usage of hypervisor.h from
bsp folder, without changing any functionality.
Tracked-On: #2694
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Currently MSR IA32_MISC_ENABLE is passthrough to guest.
However, guest may change the value of this MSR, which will cause issue in hypervisor.
This patch uses VMX MSR store area to isolate the MSR IA32_MISC_ENABLE between guest and host.
TODO:
Some bits of the MSR IA32_MISC_ENABLE is not just per core, but per package.
So need to check if need to prevent guest from setting or clearing these bits that may affect other cores.
Tracked-On: #2834
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Rename the field msr_num to msr_index, which is more accurate,
in struct msr_store_entry.
Tracked-On: #2834
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
-- move this api from misc.c to timer.c to avoid
reverse dependency, and remove misc.c
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
- for all cases of referring guest bootargs size, replace MEM_2K with
CONFIG_MAX_BOOTARGS_SIZE for better readability.
- remove duplicated MAX_BOOTARGS_SIZE definition from vm_config.h.
Also fix one minor issue in general_sw_loader() which uses copy_to_gpa()
to copy a string. Since copy_to_gpa() makes use of memncpy_s() to do the
job, the size parameter should include the string null ternimator.
Tracked-On: #2806
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove the unused seed parsing source files under
hypervisor/boot/sbl and related header files.
Tracked-On: #2724
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
This patch hide Memory Protection Extention (MPX) capability from guest.
- vCPUID change:
Clear cpuid.07H.0.ebx[14]
Clear cpuid.0DH.0.eax[4:3]
- vMSR change:
Add MSR_IA32_BNDCFGS to un-supported MSR array.
- XCR0[4:3] is not allowed to set by guest.
Tracked-On: #2821
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN uses global invalidation for all DMAR translation caches. Whenever
a UOS is shutdown or rebooted, it ends up clearing entries in translation
caches belonging to other VMs/domains. This patch adds support for
domain/device level invalidation for DMA translation caches and index
based invalidation for Interrupt Remapping Cache.
Tracked-On: #2738
Signed-off-by: Sainath Grandhi sainath.grandhi@intel.com
Acked-by: Eddie Dong eddie.dong@intel.com
Preparing for hybrid mode:
- create vE820 for pre-launched VMs and do other init code when the
vm_config->type is PRE_LAUNCHED_VM.
- create ve820.c for each board because without wrapping by
CONFIG_PARTITION_MODE, ve820_entry[] needs to be visible even when
compiling target boards that haven't enabled pre-launched VMs.
- remove create_prelaunched_vm_e820() from vm.c and implement board
specific function for each $(CONFIG_BOARD)/ve820.c. The reasons being:
- don't need to define ve820_entry[32] for those boards that don't
support pre-launched VMs.
- more importantly, this makes it much easier to create different per-VM
vE820 when it's needed.
Tracked-On: #2291
Signed-off-by: Zide Chen <zide.chen@intel.com>
