This patch makes the Service OS bootloader configurable by passing
a command-line argument to 'acrn.efi' when setting up the EFI
bootloader using, e.g., 'efibootmgr'. If no argument is passed, the
default bootloader used is: "\EFI\org.clearlinux\bootloaderx64.efi".
This is the default bootloader/setting used by Clearlinux and is set
in the bsp/uefi/include/bsp/bsp_cfg.h file (via the
CONFIG_UEFI_OS_LOADER_NAME define)
The general format of the argument is: "bootloader=<\path\to\bootloader>".
As a concrete example, imagine the following set-up:
* You have installed the Service OS (bare-metal for now)
* Bootloader is "\EFI\org.clearlinux\bootloaderx64.efi"
* Boot device is '/dev/sda'
* EFI System Partition (ESP) is '1'
* You put the ACRN hypervisor under "\EFI\acrn\"
To change the default boot entry to boot the ACRN hypervisor, enter:
# efibootmgr -c -l "\EFI\acrn\acrn.efi" -d /dev/sda -p 1 \
-L "ACRN Hypervisor" -u "bootloader=\EFI\org.clearlinux\bootloaderx64.efi"
And reboot your machine.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
- Add "DBG" or "REL" to indicate the DBG build or REL build explicityly;
- Change the build time format to "%F %T".
Example:
HV version 0.1-rc4-2018-04-28 14:20:32-b2d7282-dirty DBG build by like
Change-Id: Ib410064b0a6603e3c90f30dffa722237c07fc069
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Make assert on max px cnt of boot cpu data, since it shouldn't happen if
px data is properly initialized in boot process.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The initial of iobitmap pointer should be moved out of loop since address
is sequentially incremented.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
with this patch guest could access idle io port and enter idle normally.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The patch add function in vhm hypercall to retrieve physical cx data
to VHM/DM.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Each VM would have its own Cx data, for now we copy it from boot_cpu_info.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The cx data is hardcoded within HV, load it to boot_cpu_data when HV boot.
The patch provide a3960 soc cx data for example.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
currently, pass-thru devices are managed by per-vm's remapping entries
which is virtual based:
- MSI entry is identified by virt_bdf+msix_index
- INTx entry is identified by virt_pin+vpin_src
it works but it's not a good design for physical resource management, for
example a physical IOAPIC pin could belong to different vm's INTx entries,
the Device Model then must make sure there is no resource conflict from
application's level.
This patch change the design from virtual to physical based:
- MSI entry is identified by phys_bdf+msix_index
- INTx entry is identified by phys_pin
The physical resource is directly managed in hypervisor, a miss adding
entry will be found by hypervisor and return error message with failure.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
add initialize_timer to initialize or reset a timer;
add_timer add timer to corresponding physical cpu timer list.
del_timer delete timer from corresponding physical cpu timer list.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Get tsc hz by cpuid 0x15 if we supported, otherwise
calibrate tsc by pit timer.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If guest reboot is issued before trusty init hypercall is issued,
we shouldn't destroy ept fo trusty memory because the ept is not
created yet.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Due to redundant waking up APs When rebooting UOS, the crash occurs
and fail to reboot UOS.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Using eax will truncate the high 32bit part of 64bit virtual address.
And the type of sync is unsigned long, so using rbx instead of ebx.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
This is to do the clean-up of IOAPIC mmio-access. Use the same API to
access the IOAPIC register. At the same time it also helps to avoid the
optimization in direct access mode.(The volatile is already added in
mmio_read_long/mmio_write_long)
V1->V2: Follow Fengwei's suggestion to use the mmio_read/write_long
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
The input operand for inline assembly is passed from the caller. And they
are not the immediate type. Instead the register should be used.
This also helps to reduce the compile error if the optimizatin is enabled.
Signed-off-by: Zhao Yakui<yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now just add some basic feature/capability detect (not all). Vapic
didn't add here for if we must support vapic then the code which
for vapic not supported must remove, like mmio apic r/w.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Split pm.c from cpu_state_tbl.c to put guest power management related
functions, keep cpu_state_tbl.c to store host cpu state table and
related functions.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
for timer list is operated by per-cpu; and no interrupt
service operates it too. So it's unnecessary for spinlock.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
adding "hugepagesz=1G" and "hugepages=X" into SOS cmdline, for X, current
strategy is making it equal
e820_mem.total_mem_size -CONFIG_REMAIN_1G_PAGES
if CONFIG_REMAIN_1G_PAGES is not set, it will use 3 by default.
CONFIG_CMA is added to indicate using cma cmdline option for SOS kernel,
by default system will use hugetlb cmdline option if no CONFIG_CMA defined.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
change its input from map_params to page_table_type, and make it as a
public API.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
before just AP can run "rdtscp" intruction, if run it on BSP,
it will cause "illegal instruction"; now align BSP & AP.
also remove duplicated code.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. exception vector and other information
can be extracted from 'VM-Exit Interrupt-Information'
field of VMCS only if bit31 (Valid) is set.
-Intel SDM 24.9.2, Vol3
2. Rename 'exit-interrupt_info' to 'idt_vectoring_info'
in 'struct vcpu_arch', which is consistent with
SDM 24.9.3, Vol3
3. 'IDT-vectoring information' in VMCS is 32bit
-Intel SDM 24.9.3, Vol3
Update the type of 'idt_vectoring_info' in
'struct vcpu_arch'from 'uint32_t' to 'uint64_t'.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
If subsequent write is on the same address, maybe the compiler will optimize
the access of MMIO memory and only the last write takes effect.In such case
it is wrong. For example:
mmio_write_long(0x25, addr);
mmio_write_long(0x26, addr);
mmio_write_long(0x27, addr);
After volatile is added, it can avoid the above possible optimization and
assure that each write takes effect.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The mmio_or_long/mmio_and_long/mmio_rmw_long is defined to perform
the read & write operation. But they are not used. So they are removed.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add percpu earlylog sbuf within hypervisor memory space to accommodate log
before sos booting, and copy the earlylog to SOS allocated sbuf at the first
do_logmsg after SOS sets the sbuf during booting.
With the patch, earlylog of hypervisor could be captured with acrnlog
service if SOS booted. And it may help debugging hv issue if SOS failed to
boot, with "logdump" command.
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
These APIs are not used, and not as safe as spinlock_irqsave_obtain/
spinlock_irqrestore_release.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Before referencing to physical address of devs such as lapic, ioapic,
vtd, and uart, switch to virtual address.
Use a phisical address of pml4 to write CR3.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
SDM 24.9.1 Volume3:
- 'Exit reason' field in VMCS is 32 bits.
SDM 24.9.4 in Volume3
- 'VM-exit instruction length' field
in VMCS is 32 bits.
This patch is to redefine the data types of above fields
in 'struct vcpu_arch' and udpate the code using these
two fields.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Since we get cpu feature/capability in boot_cpu_data at boot initialization,
then there no need to get this feature/capability using cpuid again.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Update X86_FEATURE_OSXSAVE when enabled and replace is_xsave_supported
with cpu_has_cap(X86_FEATURE_OSXSAVE).
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add cpu_has_cap API for cpu feature/capability detect instead of
add get_xxx_cap for each feature/capability detect.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
