Current IO emulation is synchronous. The user VM need to wait for the
completion of the the I/O request before return. But Virtio Spec
introduces introduces asynchronous IO with a new register in MMIO/PIO
space named NOTIFY, to be used for FE driver to notify BE driver, ACRN
hypervisor can emulate this register by sending a notification to vCPU
in Service VM side. This way, FE side can resume to work without waiting
for the full completion of BE side response.
Tracked-On: #8209
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Extend sbuf hypercall to support other kinds of share buffer.
Tracked-On: #8209
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
sbuf is now only used for debug purpose, but later, it will be used as a
common interfaces. So, move the sbuf related code out of the debug directory.
Tracked-On: #8209
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Improve SMP call to support ACRN shell to operate RTVM.
before, the RTVM CPU can't be kicked off by notification IPI,
so some shell commands can't support it, like rdmsr/wrmsr,
memory/registers dump. So INIT will be used for RTVM, which
LAPIC is pass-thru.
Tracked-On: #8207
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
By default, notification IPI used to kick sharing pCPU, INIT
used to kick partition pCPU. If USE_INIT_IPI flag is passed to
hypervisor, only INIT will be used to kick pCPU.
Tracked-On: #8207
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
INIT signal has been used to kick off the partitioned pCPU, like RTVM,
whose LAPIC is pass-through. notification IPI is used to kick off
sharing pCPU.
Add mode_to_kick_pcpu in per-cpu to control the way of kicking
pCPU.
Tracked-On: #8207
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The access to PCI config_space is handled in HV for Passthrough pci
devices. And it also provides one mechanism to forward cfg_access of
some registers to DM. For example: the opregion reg for GPU device.
This patch tried to add the support of emulated PCI ROM bar for the
device. And it doesn't handle the phys PCI ROM bar of phys PCI devices.
At the same time the rom firmware is provided in DM and pci rom bar_reg
is also emulated in DM, this leverages the quirk mechanism so that the
access to PCI rom bar_reg is forwarded to DM.
Tracked-On: #8175
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
The design of ACRN CPU performance management is to let hardware
do the autonomous frequency selection(or set to a fixed value),
and remove guest's ability to control CPU frequency.
This patch is to remove guest's ability to control CPU frequency by
removing the guests' HWP/EIST CPUIDs and blocking the related MSR
accesses. Including:
- Remove CPUID.06H:EAX[7..11] (HWP)
- Remove CPUID.01H:ECX[7] (EIST)
- Inject #GP(0) upon accesses to MSR_IA32_PM_ENABLE,
MSR_IA32_HWP_CAPABILITIES, MSR_IA32_HWP_REQUEST,
MSR_IA32_HWP_STATUS, MSR_IA32_HWP_INTERRUPT,
MSR_IA32_HWP_REQUEST_PKG
- Emulate MSR_IA32_PERF_CTL. Value written to MSR_IA32_PERF_CTL
is just stored for reading. This is like how the native
environment would behavior when EIST is disabled from BIOS.
- Emulate MSR_IA32_PERF_STATUS by filling it with base frequency
state. This is consistent with Windows, which displays current
frequency as base frequency when running in VM.
- Hide the IA32_MISC_ENABLE bit 16 (EIST enable) from guests.
This bit is dependent to CPUID.01H:ECX[7] according to SDM.
- Remove CPID.06H:ECX[0] (hardware coordination feedback)
- Inject #GP(0) upon accesses to IA32_MPERF, IA32_APERF
Also DM do not need to generate _PSS/_PPC for post-launched VMs
anymore. This is done by letting hypercall HC_PM_GET_CPU_STATE sub
command ACRN_PMCMD_GET_PX_CNT and ACRN_PMCMD_GET_PX_DATA return (-1).
Tracked-On: #8168
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
BVT schedule rule:
When a new thread is wakeup and added to runqueue, it will get the
smallest avt (svt) from runqueue to initiate its avt. If the svt is
smaller than it's avt, it will keep the original avt. With the svt, it
can prevent a thread from claiming an excessive share of CPU after
sleepting for a long time.
For the reboot issue, when the VM is reboot, it means a new vcpu thread
is wakeup, but at this time, the Service VM's vcpu thread is blocked,
and removed from the runqueue, and the runqueue is empty, so the svt is
0. The new vcpu thread will get avt=0. avt=0 means very high priority,
and can run for a very long time until it catch up with other thread's
avt in runqueue.
At this time, when Service VM's vcpu thread wakeup, it will check the
svt, but the svt is very small, so will not update it's avt according to
the rule, thus has a very low priority and cannot be scheduled.
To fix it, update svt in pick_next handler to make sure svt is align
with the avt of the first obj in runqueue.
Tracked-On: #7944
Signed-off-by: Conghui <conghui.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
1. make memcpy_erms as a public API; add a new one
memcpy_erms_backwards, which supports to copy data from tail to head.
2. improve to use right/left/home/end key to move cursor, and support
delete/backspace key to modify current input command.
Tracked-On: #7931
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For platform that supports RRSBA (Restricted Return Stack Buffer
Alternate), using retpoline may not be sufficient to guard against branch
history injection or intra-mode branch target injection. RRSBA must
be disabled to prevent CPUs from using alternate predictors for RETs.
Quoting Intel CVE-2022-0001/CVE-2022-0002:
Where software is using retpoline as a mitigation for BHI or intra-mode BTI,
and the processor both enumerates RRSBA and enumerates RRSBA_DIS controls,
it should disable this behavior.
...
Software using retpoline as a mitigation for BHI or intra-mode BTI should use
these new indirect predictor controls to disable alternate predictors for RETs.
See: https://www.intel.com/content/www/us/en/developer/articles/technical/
software-security-guidance/technical-documentation/branch-history-injection.html
Tracked-On: #7907
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
TLFS defined 2 vMSRs which can be used by Windows guest to get the
TSC/APIC frequencies from hypervisor. This patch adds the support
of HV_X64_MSR_TSC_FREQUENCY/HV_X64_MSR_APIC_FREQUENCY vMSRS whose
availability is exposed by CPUID.0x40000003:EAX[bit11] and EDX[bit8].
v1->v2:
- revise commit message to highlight that the changes are for WaaG
Tracked-On: #7876
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
On some platforms CPUID.0x15:ECX is zero and CPUID.0x16 can
only return the TSC frequency in MHZ which is not accurate.
For example the TSC frequency obtained by CPUID.0x16 is 2300
MHZ and the TSC frequency calibrated by HPET is 2303.998 MHZ
which is much closer to the actual TSC frequency 2304.000 MHZ.
This patch adds the support of using HPET to calibrate TSC
when HPET is available and CPUID.0x15:ECX is zero.
v3->v4:
- move calc_tsc_by_hpet into hpet_calibrate_tsc
v2->v3:
- remove the NULL check in hpet_init
- remove ""& 0xFFFFFFFFU" in tsc_read_hpet
- add comment for the counter wrap in the low 32 bits in
calc_tsc_by_hpet
- use a dedicated function for hpet_calibrate_tsc
v1->v2:
- change native_calibrate_tsc_cpuid_0x15/0x16 to
native_calculate_tsc_cpuid_0x15/0x16
- move hpet_init to BSP init
- encapsulate both HPET and PIT calibration to one function
- revise the commit message with an example"
Tracked-On: #7876
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Modified the copyright year range in code, and corrected "int32_tel"
into "Intel" in two "hypervisor/include/debug/profiling.h" and
"hypervisor/include/debug/profiling_internal.h".
Tracked-On: #7559
Signed-off-by: Ziheng Li <ziheng.li@intel.com>
As mentioned in previous patch, wbinvd utilizes the vcpu_make_request
and signal_event call pair to stall other vcpus. Due to the fact that
these two calls are not thread-safe, we need to avoid concurrent call to
this API pair.
This patch adds wbinvd lock to serialize wbinvd emulation.
Tracked-On: #7887
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Commit d575edf79a changes the internal
implementation of wait_event and signal_event to use a counter instead
of a boolean value.
The background was:
ACRN utilizes vcpu_make_request and signal_event pair to shoot down
other vcpus and let them wait for signals. vcpu_make_request eventually
leads to target vcpu calling wait_event.
However vcpu_make_request/signal_event pair was not thread-safe,
and concurrent calls of this pair of API could lead to problems.
One such example is the concurrent wbinvd emulation, where vcpus may
concurrently issue vcpu_make_request/signal_event to synchronize wbinvd
emulation.
d575edf commit uses a counter in internal implementation of
wait_event/signal_event to avoid data races.
However by using a counter, the wait/signal pair now carries semantics of
semaphores instead of events. Semaphores require caller to carefully
plan their calls instead of multiply signaling any number of times to the same
event, which deviates from the original "event" semantics.
This patch changes the API implementation back to boolean-based, and
re-resolve the issue of concurrent wbinvd in next patch.
This also partially reverts commit 10963b04d1,
which was introduced because of the d575edf.
Tracked-On: #7887
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There is an issue of calculate 2^n roundup of CONFIG_MAX_PT_IRQ_ENTRIES,
and the code style is very ugly when we use macro to fix it.
So this patch move MAX_IR_ENTRIES to offline tool which could do align
check and calculate it automatically.
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Current code limit the MAX vUART number to 8 which is not enough for
Service VM which should config S5 UART for each user VM.
We could count how many vUARTs we need by offline tool, so remove the
define of MAX_VUART_NUM_PER_VM to offline tool is a simple and accurate
way to allocate vUARTs.
Tracked-On: #8782
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
For physical RTC is monotonic growth, ensure vRTC monotonicity.
Periodical calibration and physical RTC modification may have
impact. Check it before reading
Tracked-On: #7440
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
VRTC for hv used to ignore writes to vRTC register.
This patch add time modification to vRTC.
Add base RTC time and TSC offset to get the current time. Convert
current time to vRTC register values (`struct rtcdev`). Then
modify a register, and calculate a new time. Get RTC offset by
substrcting new time from current time.
Thereafter, add RTC offset also when get current time. Then user
can get the modified time.
Tracked-On: #7440
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
During setting RTC time, driver will halt RTC update. So support
bit 7 of reg_b. When it set to 0, time will be updated. And
when it's set to 1, rtc will keep the second it was set.
In the process of getting RTC time, driver sets alarm interrupt,
waits 1s, and get alarm interrupt flag. So support alarm interrupt
flag update. If alarm interrupt is enabled (bit 5, reg_b set to 1),
interrupt flag register will be set (bit 7 & bit 5 of reg_c) at
appropriate time.
Tracked-On: #7440
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add support for hour format.
Bit 1 of register B indicates the hour byte format. When it's 0,
twelve-hour mode is selected. Then the seventh bit of hour register
presents AM as 0 and PM as 1.
Tracked-On: #7440
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add judging of the vRTC data mode. If BCD data mode is inuse,
make conversion of data.
Tracked-On: #7440
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Current code would read physical RTC register and return it directly to guest.
This patch would read a base physical RTC time and a base physical TSC time
at initialize stage. Then when guest tries to read vRTC time, ACRN HV would
read the real TSC time and use the TSC offset to calculate the real RTC time.
This patch only support BIN data mode and 24 hour mode.
BCD data mode and 12 hour mode will add in other patch.
The accuracy of clock provided by this patch is limited by TSC, and will
be improved in a following patch also.
Tracked-On: #7440
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
The movdqu instruction moves unaligned double quadword (128 bit)
contained in XMM registers.
This patch uses pointers as input parameters of the function
write_xmm_0_2() to get 128-bit value from 64-bit array for each XMM
register.
Tracked-On: #7380
Reviewed-by: Fei Li <fei1.li@intel.com>
Signed-off-by: Jiang, Yanting <yanting.jiang@intel.com>
In spite of Table Size in MSI-X Message Control Register [Bits 10:0] masks as
RO (Register bits are read-only and cannot be altered by software), In Spec
PCIe 6.0, Chap 6.1.4.2 MSI-X Configuration "Depending upon system software
policy, system software, device driver software, or each at different times or
environments may configure a Function’s MSI-X Capability and table structures
with suitable vectors."
This patch just pass through MSI-X Control Register field to guest.
Tracked-On: #7275
Signed-off-by: Fei Li <fei1.li@intel.com>
Since CAT support for hybrid platform is landed, let's remove some old declarations
which are no longer used.
Tracked-On: #6690
Signed-off-by: Tw <wei.tan@intel.com>
The current code only supports 2 HPA regions per VM.
This patch extended ACRN to support 2+ HPA regions per VM, to use host
memory better if it is scatted among multiple regions.
This patch uses an array to describe the hpa region for the VM, and
change the logic of ve820 to support multiple regions.
This patch dependent on the config tool and GPA SSRAM change
Tracked-On: #6690
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Page table entry present check is page table type
specific and static, e.g. just need to check bit0
of page entry for entries of MMU page table and
bit2~bit0 for EPT page table case. hence no need to
check it by callback function every time.
This patch remove 'pgentry_present' callback field and
add a new bitmask field for this page entry present check.
It can get better performance especially when this
check is executed frequently.
Tracked-On: #7327
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Using the SSRAM area size extracted by config_tools, the patch changes
the hard-coded GPA SSRAM area size to its actual size, so that
pre-launched VMs can support large(>8MB) SSRAM area.
When booting service VM, the SSRAM area has to be removed from Service
VM's mem space, because they are passed-through to the pre-rt VM. The
code was bugged since it was using the SSRAM area's GPA in the pre-rt
VM. Changed it to GPA in Service VM.
Tracked-On: #7212
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
On hybrid platform(e.g. ADL), there may be multiple instances of same level caches for different type of processors,
The current design only supports one global `rdt_info` for each RDT resource type.
In order to support hybrid platform, this patch introduce `rdt_ins` to represents the "instance".
Also, the number of `rdt_info` is dynamically generated by config-tool to match with physical board.
Tracked-On: projectacrn#6690
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
As RDT related information will be offered by config-tool dynamically,
and HV is just a consumer of that. So there's no need to do this detection
at startup anymore.
Tracked-On: projectacrn#6690
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Many of the license and Intel copyright headers include the "All rights
reserved" string. It is not relevant in the context of the BSD-3-Clause
license that the code is released under. This patch removes those strings
throughout the code (hypervisor, devicemodel and misc).
Tracked-On: #7254
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Unify the handling of host/guest MSR area in VMCS. Remove the emum value
as the element index when there are a few of MSRs in host/guest area.
Because the index could be changed if one element not used. So, use a
variable to save the index which will be used.
Tracked-On: #6966
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Requirement: in CPU partition VM (RTVM), vtune or perf can be used to
sample hotspot code path to tune the RT performance, It need support
PMU/PEBS (Processor Event Based Sampling). Intel TCC asks for it, too.
It exposes PEBS related capabilities/features and MSRs to CPU
partition VM, like RTVM. PEBS is a part of PMU. Also PEBS needs
DS (Debug Store) feature to support. So DS is exposed too.
Limitation: current it just support PEBS feature in VM level, when CPU
traps to HV, the performance counter will stop. Perf global control
MSR is used to do this work. So, the counters shall be close to native.
Tracked-On: #6966
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Add a flag: GUEST_FLAG_PMU_PASSTHROUGH to indicate if
PMU (Performance Monitor Unit) is passthrough to guest VM.
Tracked-On: #6966
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
NMI is used to notify LAPIC-PT RTVM, to kick its CPU into hypervisor.
But NMI could be used by system devices, like PMU (Performance Monitor
Unit). So use INIT signal as the partition CPU notification function, to
replace injecting NMI.
Also remove unused NMI as notification related code.
Tracked-On: #6966
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Now the vept module uses a mixture of nept and vept, it's better to
refine it.
So this patch rename nept to vept and simplify the interface of vept
init module.
Tracked-On: #6690
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
This patch adds ENOTTY and ENOSYS to indicate undefined and obsoleted
request hyercall respectively, and uses ENOTTY as error code for undefined
hypercall instead of EINVAL to consistent with the ACRN kernel's return
value.
Tracked-On: #7029
Signed-off-by: Wen Qian <qian.wen@intel.com>
Signed-off-by: Li Fei <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Now the vept table was allocate dynamically, but the table size of vept
was calculated by the CONFIG_PLATFORM_RAM_SIZE which was predefined by
config tool.
It's not complete change and can't support single binary for different
boards/platforms.
So this patch will replace the CONFIG_PLATFORM_RAM_SIZE and get the
top ram size from hv_E820 interface for vept.
Tracked-On: #6690
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
CONFIG_PLATFORM_RAM_SIZE is predefined by config tool and mmu use it to
calculate the table size and predefine the ppt table.
This patch will change the ppt to allocate dynamically and get the table
size by the hv_e820_ram_size interface which could get the RAM
info on run time and replace the CONFIG_PLATFORM_RAM_SIZE.
Tracked-On: #6690
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
The e820 module could get the RAM info on run time, but the RAM size
and MAX address was limited by CONFIG_PLATFORM_RAM_SIZE which was
predefined by config tool.
Current solution can't support single binary for different boards or
platforms and the CONFIG_PLATFORM_RAM_SIZE can't matching the RAM size
if user have not update config tools setting after the device changed.
So this patch remove the CONFIG_PLATFORM_RAM_SIZE and calculate ram
size on run time.
Tracked-On: #6690
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
HC_GET_PLATFORM_INFO hypercall is not supported anymore,
hence to remove related function and data structure definition.
Tracked-On: #6690
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
The coding guideline rule C-FN-16 requires that 'Mixed-use of
C code and assembly code in a single function shall not be allowed',
this patch wraps inline assembly to inline functions.
Tracked-On: #6776
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
v1-->v2:
use inline functions for read/write XMM registers
This patch adds an option CONFIG_KEEP_IRQ_DISABLED to hv (default n) and
config-tool so that when this option is 'y', all interrupts in hv root
mode will be permanently disabled.
With this option to be 'y', all interrupts received in root mode will be
handled in external interrupt vmexit after next VM entry. The postpone
latency is negligible. This new configuration is a requirement from x86
TEE's secure/non-secure interrupt flow support. Many race conditions can be
avoided when keeping IRQ off.
v5:
Rename CONFIG_ACRN_KEEP_IRQ_DISABLED to CONFIG_KEEP_IRQ_DISABLED
v4:
Change CPU_IRQ_ENABLE/DISABLE to
CPU_IRQ_ENABLE_ON_CONFIG/DISABLE_ON_CONFIG and guard them using
CONFIG_ACRN_KEEP_IRQ_DISABLED
v3:
CONFIG_ACRN_DISABLE_INTERRUPT -> CONFIG_ACRN_KEEP_IRQ_DISABLED
Add more comment in commit message
Tracked-On: #6571
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
"idle=halt " should be avoided in REE since we have to
keep the interrupt always masked in root mode.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The TEE_NOTIFICATION_VECTOR can sometimes be confused with TEE's PI
notification vector. So rename it to TEE_FIXED_NONSECURE_VECTOR for
better readability.
No logic change.
v3:
Add more comments in commit message.
Tracked-On: #6571
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Sometimes HV would like to know if there are specific interrupt
pending in vIRR, and clears them if necessary (such as in x86_tee case).
This patch adds two APIs: get_next_pending_intr and clear_pending_intr.
This patch also moves the inline api prio() from
vlapic.c to vlapic.h
v3:
Remove apicv_get_next_pending_intr and apicv_clear_pending_intr
and use vlapic_get_next_pending_intr and vlapic_clear_pending_intr
directly.
v2:
get_pending_intr -> get_next_pending_intr
apicv_basic/advanced_clear_pending_intr -> apicv_clear_pending_intr
apicv_basic/advanced_get_pending_intr -> apicv_get_next_pending_intr
has_pending_intr kept
Tracked-On: #6571
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch wraps the check of GUEST_FLAG_TEE/REE into functions
is_tee_vm/is_ree_vm for readability. No logic changes.
Tracked-On: #6571
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The CONFIG_LOG_DESTINATION parameter selects where the logging messages
send to，serial console or memory or npk device MMIO region.
Now we want to remove it and check the loglevel of each channel,close the
output when the loglevel is ZERO.
Tracked-On: #6934
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
