1. Enable Service VM to power off or restart the whole platform even when RTVM is running.
2. Allow Service VM stop the RTVM using acrnctl tool with option "stop -f".
3. Add 'Service VM supervisor role enabled' option in ACRN configurator
Tracked-On: #8618
Signed-off-by: YuanXin-Intel <xin.yuan@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Jian Jun Chen <jian.jun.chen@intel.com>
Now only BSP is reset. After Service VM OS resumes from s3, APs'
apic_base_msr are incorrect with x2apic bit en.
To avoid incorrect states, do `reset_vm` after resume.
Tracked-On: #8623
Signed-off-by: Haiwei Li <haiwei.li@intel.com>
Virtio legacy device (ver < 1.0) uses a single PIO for all virtqueues.
Notifications from different virtqueues are implemented by writing
virtqueue index to the PIO. Writing different values to the same addr
needs to be mapped to different eventfds by asyncio. This is called
data match feature of asyncio.
v3 -> v4:
* Update the definition of `struct asyncio_desc`
Use `struct acrn_asyncio_info` inside it, instaed of defining the duplicated
fileds.
* Update `add_asyncio` to use `memcpy_s` rather than assigning all the fields
using 5 assignment statements.
* Update `asyncio_is_conflict` for coding style
120-character line is sufficient to write all conditions.
* Update the checks related to `wildcard`
Because we require every conditional clause to have a Boolean type
in the coding guideline.
v2 -> v3:
No change
v1 -> v2:
No change
Tracked-On: #8612
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
In hcall_vm_intr_monitor(), the default case for intr_hdr->cmd is a
wrong case. So, it should return error code back. But it returns success
code 0 in current codes.
Tracked-On: #8580
Reviewed-by: Fei Li <fei1.li@intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
When VHWP enabled, return 0 and px_cnt = 0 on ACRN_PMCMD_GET_PX_CNT,
so that DM will write _CPC to guests' ACPI.
Tracked-On: #8414
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
When assigning a physical interrupt to a Post-launched VM, if it has
been assigned to ServiceVM, we should remove that mapping first to reset
ioapic pin state and rte, and build new mapping for the Post-launched
VM.
Tracked-On: #8370
Signed-off-by: Qiang Zhang <qiang4.zhang@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add hypercall to add/remove asyncio request info. Hv will record the
info in a list, and when a new ioreq is come, hv will check if it is
in the asyncio list, if yes, queue the fd to asyncio buffer.
Tracked-On: #8209
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Extend sbuf hypercall to support other kinds of share buffer.
Tracked-On: #8209
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The design of ACRN CPU performance management is to let hardware
do the autonomous frequency selection(or set to a fixed value),
and remove guest's ability to control CPU frequency.
This patch is to remove guest's ability to control CPU frequency by
removing the guests' HWP/EIST CPUIDs and blocking the related MSR
accesses. Including:
- Remove CPUID.06H:EAX[7..11] (HWP)
- Remove CPUID.01H:ECX[7] (EIST)
- Inject #GP(0) upon accesses to MSR_IA32_PM_ENABLE,
MSR_IA32_HWP_CAPABILITIES, MSR_IA32_HWP_REQUEST,
MSR_IA32_HWP_STATUS, MSR_IA32_HWP_INTERRUPT,
MSR_IA32_HWP_REQUEST_PKG
- Emulate MSR_IA32_PERF_CTL. Value written to MSR_IA32_PERF_CTL
is just stored for reading. This is like how the native
environment would behavior when EIST is disabled from BIOS.
- Emulate MSR_IA32_PERF_STATUS by filling it with base frequency
state. This is consistent with Windows, which displays current
frequency as base frequency when running in VM.
- Hide the IA32_MISC_ENABLE bit 16 (EIST enable) from guests.
This bit is dependent to CPUID.01H:ECX[7] according to SDM.
- Remove CPID.06H:ECX[0] (hardware coordination feedback)
- Inject #GP(0) upon accesses to IA32_MPERF, IA32_APERF
Also DM do not need to generate _PSS/_PPC for post-launched VMs
anymore. This is done by letting hypercall HC_PM_GET_CPU_STATE sub
command ACRN_PMCMD_GET_PX_CNT and ACRN_PMCMD_GET_PX_DATA return (-1).
Tracked-On: #8168
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Modified the copyright year range in code, and corrected "int32_tel"
into "Intel" in two "hypervisor/include/debug/profiling.h" and
"hypervisor/include/debug/profiling_internal.h".
Tracked-On: #7559
Signed-off-by: Ziheng Li <ziheng.li@intel.com>
Many of the license and Intel copyright headers include the "All rights
reserved" string. It is not relevant in the context of the BSD-3-Clause
license that the code is released under. This patch removes those strings
throughout the code (hypervisor, devicemodel and misc).
Tracked-On: #7254
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The coding guideline rule C-ST-04 requires that
a 'if' statement followed by one or more 'else if'
statement shall be terminated by an 'else' statement
which contains either appropriate action or a comment.
Tracked-On: #6776
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
HC_GET_PLATFORM_INFO hypercall is not supported anymore,
hence to remove related function and data structure definition.
Tracked-On: #6690
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Avoid failing hypercalls by returning 0 for empty PX and CX tables on
HC_PM_GET_CPU_STATE/PMCMD_GET_PX_CNT and
HC_PM_GET_CPU_STATE/PMCMD_GET_CX_CNT.
Tracked-On: #6848
Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@opensource.tttech-industrial.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Since the UUID is not a *must* set parameter for the standard post-launched
VM which doesn't depend on any static VM configuration. We can remove
the KATA related code from hypervisor as it belongs to such VM type.
v2-->v3:
separate the struce acrn_platform_info change of devicemodel
v1-->v2:
update the subject and commit msg
Tracked-On:#6685
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
With current arch design the UUID is used to identify ACRN VMs,
all VM configurations must be deployed with given UUIDs at build time.
For post-launched VMs, end user must use UUID as acrn-dm parameter
to launch specified user VM. This is not friendly for end users
that they have to look up the pre-configured UUID before launching VM,
and then can only launch the VM which its UUID in the pre-configured UUID
list,otherwise the launch will fail.Another side, VM name is much straight
forward for end user to identify VMs, whereas the VM name defined
in launch script has not been passed to hypervisor VM configuration
so it is not consistent with the VM name when user list VM
in hypervisor shell, this would confuse user a lot.
This patch will resolve these issues by removing UUID as VM identifier
and use VM name instead:
1. Hypervisor will check the VM name duplication during VM creation time
to make sure the VM name is unique.
2. If the VM name passed from acrn-dm matches one of pre-configured
VM configurations, the corresponding VM will be launched,
we call it static configured VM.
If there is no matching found, hypervisor will try to allocate one
unused VM configuration slot for this VM with given VM name and get it
run if VM number does not reach CONFIG_MAX_VM_NUM,
we will call it dynamic configured VM.
3. For dynamic configured VMs, we need a guest flag to identify them
because the VM configuration need to be destroyed
when it is shutdown or creation failed.
v7->v8:
-- rename is_static_vm_configured to is_static_configured_vm
-- only set DM owned guest_flags in hcall_create_vm
-- add check dynamic flag in get_unused_vmid
v6->v7:
-- refine get_vmid_by_name, return the first matching vm_id
-- the GUEST_FLAG_STATIC_VM is added to identify the static or
dynamic VM, the offline tool will set this flag for
all the pre-defined VMs.
-- only clear name field for dynamic VM instead of clear entire
vm_config
Tracked-On: #6685
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Victor Sun<victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The coding guideline rules C-TY-27 and C-TY-28, combined, requires that
assignment and arithmetic operations shall be applied only on operands of the
same kind. This patch either adds explicit type casts or adjust types of
variables to align the types of operands.
The only semantic change introduced by this patch is the promotion of the
second argument of set_vmcs_bit() and clear_vmcs_bit() to
uint64_t (formerly uint32_t). This avoids clear_vmcs_bit() to accidentally
clears the upper 32 bits of the requested VMCS field.
Other than that, this patch has no semantic change. Specifically this patch
is not meant to fix buggy narrowing operations, only to make these
operations explicit.
Tracked-On: #6776
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename SOS_VM_NUM to SERVICE_VM_NUM.
rename SOS_SOCKET_PORT to SERVICE_VM_SOCKET_PORT.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename PCI_DEV_TYPE_SOSEMUL to PCI_DEV_TYPE_SERVICE_VM_EMUL.
rename SHUTDOWN_REQ_FROM_SOS to SHUTDOWN_REQ_FROM_SERVICE_VM.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename SHUTDOWN_REQ_FROM_UOS to SHUTDOWN_REQ_FROM_USER_VM.
rename UOS_SOCKET_PORT to USER_VM_SOCKET_PORT.
rename SOS_CONSOLE to SERVICE_VM_OS_CONSOLE.
rename SOS_LCS_SOCK to SERVICE_VM_LCS_SOCK.
rename SOS_VM_BOOTARGS to SERVICE_VM_OS_BOOTARGS.
rename SOS_ROOTFS to SERVICE_VM_ROOTFS.
rename SOS_IDLE to SERVICE_VM_IDLE.
rename SEVERITY_SOS to SEVERITY_SERVICE_VM.
rename SOS_VM_UUID to SERVICE_VM_UUID.
rename SOS_REQ to SERVICE_VM_REQ.
rename RTCT_NATIVE_FILE_PATH_IN_SOS to RTCT_NATIVE_FILE_PATH_IN_SERVICE_VM.
rename CBC_REQ_T_UOS_ACTIVE to CBC_REQ_T_USER_VM_ACTIVE.
rename CBC_REQ_T_UOS_INACTIVE to CBC_REQ_T_USER_VM_INACTIV.
rename uos_active to user_vm_active.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Rename sos_vm to service_vm.
rename sos_vmid to service_vmid.
rename sos_vm_ptr to service_vm_ptr.
rename get_sos_vm to get_service_vm.
rename sos_vm_gpa to service_vm_gpa.
rename sos_vm_e820 to service_vm_e820.
rename sos_efi_info to service_vm_efi_info.
rename sos_vm_config to service_vm_config.
rename sos_vm_hpa2gpa to service_vm_hpa2gpa.
rename vdev_in_sos to vdev_in_service_vm.
rename create_sos_vm_e820 to create_service_vm_e820.
rename sos_high64_max_ram to service_vm_high64_max_ram.
rename prepare_sos_vm_memmap to prepare_service_vm_memmap.
rename post_uos_sworld_memory to post_user_vm_sworld_memory
rename hcall_sos_offline_cpu to hcall_service_vm_offline_cpu.
rename filter_mem_from_sos_e820 to filter_mem_from_service_vm_e820.
rename create_sos_vm_efi_mmap_desc to create_service_vm_efi_mmap_desc.
rename HC_SOS_OFFLINE_CPU to HC_SERVICE_VM_OFFLINE_CPU.
rename SOS to Service VM in comments message.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Implement the propagate_vcbm() function:
Set vCBM to to all the vCPUs that share cache with vcpu
to mimic hardware CAT behavior
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
It's difficult to configure CONFIG_HV_RAM_SIZE properly at once. This patch
not only remove CONFIG_HV_RAM_SIZE, but also we use ld linker script to
dynamically get the size of HV RAM size.
Tracked-On: #6663
Signed-off-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
GSI of hcall_set_irqline should be checked against target_vm's
total GSI count instead of SOS's total GSI count.
Tracked-On: #6357
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. add a name field to indicate what the MMIO Device is.
2. add two more MMIO resource to the acrn_mmiodev data structure.
Tracked-On: #6366
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Signed-off-by: Fei Li <fei1.li@intel.com>
IC_ADD_HV_VDEV -> ACRN_IOCTL_CREATE_VDEV
IC_REMOVE_HV_VDEV -> ACRN_IOCTL_DESTROY_VDEV
struct acrn_emul_dev -> struct acrn_vdev
Also, move struct acrn_vdev to acrn_common.h as this structure is used
by both DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
IC_ASSIGN_MMIODEV -> ACRN_IOCTL_ASSIGN_MMIODEV
IC_DEASSIGN_MMIODEV -> ACRN_IOCTL_DEASSIGN_MMIODEV
struct acrn_mmiodev has slight change. Move struct acrn_mmiodev into
acrn_common.h because it is used by both DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
IC_ASSIGN_PCIDEV -> ACRN_IOCTL_ASSIGN_PCIDEV
IC_DEASSIGN_PCIDEV -> ACRN_IOCTL_DEASSIGN_PCIDEV
QUIRK_PTDEV -> ACRN_PTDEV_QUIRK_ASSIGN
struct acrn_assign_pcidev -> struct acrn_pcidev
Move struct acrn_pcidev into acrn_common.h because it is used by both
DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
struct hc_platform_info -> struct acrn_platform_info
MAX_PLATFORM_LAPIC_IDS -> ACRN_PLATFORM_LAPIC_IDS_MAX
A layout change to the struct hc_platform_info is that move
max_kata_containers to back of vm_config_size,
uint16_t max_vcpus_per_vm;
uint16_t max_vms;
uint32_t vm_config_size;
uint64_t max_kata_containers;
Then, they are nature 64-bits aligned.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
So that DM can retrieve physical APIC IDs and use them to fill in the ACPI MADT table for
post-launched VMs.
Note:
1. DM needs to use the same logic as hypervisor to calculate vLAPIC IDs based on physical APIC IDs
and CPU affinity setting
2. Using reserved0[] in struct hc_platform_info to pass physical APIC IDs means we can only support at
most 116 cores. And it assumes LAPIC ID is 8bits (X2APIC mode supports 32 bits).
Cat IDs shift will be used by DM RTCT V2
Tracked-On: #6020
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Create virtual root port through add_vdev hypercall. add_vdev
identifies the virtual device to add by its vendor id and device id, then
call the corresponding function to create virtual device.
-create_vrp(): Find the right virtual root port to create
by its secondary bus number, then initialize the virtual root port.
And finally initialize PTM related configurations.
-destroy_vrp(): nothing to destroy
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Jason Chen <jason.cj.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Generalize and split basic cpu cycle/tick routines from x86/timer:
- Instead of rdstc(), use cpu_ticks() in generic code.
- Instead of get_tsc_khz(), use cpu_tickrate() in generic code.
- Include "common/ticks.h" instead of "x86/timer.h" in generic code.
- CYCLES_PER_MS is renamed to TICKS_PER_MS.
The x86 specific API rdstc() and get_tsc_khz(), as well as TSC_PER_MS
are still available in arch/x86/tsc.h but only for x86 specific usage.
Tracked-On: #5920
Signed-off-by: Rong Liu <rong2.liu@intel.com>
Signed-off-by: Yi Liang <yi.liang@intel.com>
The current permission-checking and dispatching mechanism of hypercalls is
not unified because:
1. Some hypercalls require the exact vCPU initiating the call, while the
others only need to know the VM.
2. Different hypercalls have different permission requirements: the
trusty-related ones are enabled by a guest flag, while the others
require the initiating VM to be the Service OS.
Without a unified logic it could be hard to scale when more kinds of
hypercalls are added later.
The objectives of this patch are as follows.
1. All hypercalls have the same prototype and are dispatched by a unified
logic.
2. Permissions are checked by a unified logic without consulting the
hypercall ID.
To achieve the first objective, this patch modifies the type of the first
parameter of hcall_* functions (which are the callbacks implementing the
hypercalls) from `struct acrn_vm *` to `struct acrn_vcpu *`. The
doxygen-style documentations are updated accordingly.
To achieve the second objective, this patch adds to `struct hc_dispatch` a
`permission_flags` field which specifies the guest flags that must ALL be
set for a VM to be able to invoke the hypercall. The default value (which
is 0UL) indicates that this hypercall is for SOS only. Currently only the
`permission_flag` of trusty-related hypercalls have the non-zero value
GUEST_FLAG_SECURE_WORLD_ENABLED.
With `permission_flag`, the permission checking logic of hypercalls is
unified as follows.
1. General checks
i. If the VM is neither SOS nor having any guest flag that allows
certain hypercalls, it gets #UD upon executing the `vmcall`
instruction.
ii. If the VM is allowed to execute the `vmcall` instruction, but
attempts to execute it in ring 1, 2 or 3, the VM gets #GP(0).
2. Hypercall-specific checks
i. If the hypercall is for SOS (i.e. `permission_flag` is 0), the
initiating VM must be SOS and the specified target VM cannot be a
pre-launched VM. Otherwise the hypercall returns -EINVAL without
further actions.
ii. If the hypercall requires certain guest flags, the initiating VM
must have all the required flags. Otherwise the hypercall returns
-EINVAL without further actions.
iii. A hypercall with an unknown hypercall ID makes the hypercall
returns -EINVAL without further actions.
The logic above is different from the current implementation in the
following aspects.
1. A pre-launched VM now gets #UD (rather than #GP(0)) when it attempts
to execute `vmcall` in ring 1, 2 or 3.
2. A pre-launched VM now gets #UD (rather than the return value -EPERM)
when it attempts to execute a trusty hypercall in ring 0.
3. The SOS now gets the return value -EINVAL (rather than -EPERM) when it
attempts to invoke a trusty hypercall.
4. A post-launched VM with trusty support now gets the return value
-EINVAL (rather than #UD) when it attempts to invoke a non-trusty
hypercall or an invalid hypercall.
v1 -> v2:
- Update documentation that describe hypercall behavior.
- Fix Doxygen warnings
Tracked-On: #5924
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Instead of "#include <x86/foo.h>", use "#include <asm/foo.h>".
In other words, we are adopting the same practice in Linux kernel.
Tracked-On: #5920
Signed-off-by: Liang Yi <yi.liang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Requires explicit arch path name in the include directive.
The config scripts was also updated to reflect this change.
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Each .c file includes the arch specific irq header file (with full
path) by itself if required.
Tracked-On: #5825
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Below boolean function are defined in this patch:
- is_software_sram_enabled() to check if SW SRAM
feature is enabled or not.
- set global variable 'is_sw_sram_initialized'
to file static.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For FuSa's case, we remove all dynamic memory allocation use in ACRN HV. Instead,
we use static memory allocation or embedded data structure. For pagetable page,
we prefer to use an index (hva for MMU, gpa for EPT) to get a page from a special
page pool. The special page pool should be big enougn for each possible index.
This is not a big problem when we don't support 64 bits MMIO. Without 64 bits MMIO
support, we could use the index to search addrss not larger than DRAM_SIZE + 4G.
However, if ACRN plan to support 64 bits MMIO in SOS, we could not use the static
memory alocation any more. This is because there's a very huge hole between the
top DRAM address and the bottom 64 bits MMIO address. We could not reserve such
many pages for pagetable mapping as the CPU physical address bits may very large.
This patch will use dynamic page allocation for pagetable mapping. We also need
reserve a big enough page pool at first. For HV MMU, we don't use 4K granularity
page table mapping, we need reserve PML4, PDPT and PD pages according the maximum
physical address space (PPT va and pa are identical mapping); For each VM EPT,
we reserve PML4, PDPT and PD pages according to the maximum physical address space
too, (the EPT address sapce can't beyond the physical address space), and we reserve
PT pages by real use cases of DRAM, low MMIO and high MMIO.
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Tracked-On: #5788
Current implementation, SOS may allocate the memory region belonging to
hypervisor/pre-launched VM to a post-launched VM. Because it only verifies
the start address rather than the entire memory region.
This patch verifies the validity of the entire memory region before
allocating to a post-launched VM so that the specified memory can only
be allocated to a post-launched VM if the entire memory region is mapped
in SOS’s EPT.
Tracked-On: #5555
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Physical address to SW SRAM region maybe different
on different platforms, this hardcoded address may
result in address mismatch for SW SRAM operations.
This patch removes above hardcoded address and uses
the physical address parsed from native RTCT.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
'ptcm' and 'ptct' are legacy name according
to the latest TCC spec, hence rename below files
to avoid confusing:
ptcm.c -> rtcm.c
ptcm.h -> rtcm.h
ptct.h -> rtct.h
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
- The current code to virtualize CR0/CR4 is not
well designed, and hard to read.
This patch reshuffle the logic to make it clear
and classify those bits into PASSTHRU,
TRAP_AND_PASSTHRU, TRAP_AND_EMULATE & reserved bits.
Tracked-On: #5586
Signed-off-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
While following two styles are both correct, the 2nd one is simpler.
bool is_level_triggered;
1. if (is_level_triggered == true) {...}
2. if (is_level_triggered) {...}
This patch cleans up the style in hypervisor.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
- fix bug in 'hcall_destroy_vdev()', the availability of
vpci device shall be checked on 'target_vm".
- refine 'vpci_update_one_vbar()' to avoid potential NULL
pointer access.
Tracked-On: #5490
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Hypercall handlers for post-launched VMs automatically grab the vm_lock
in dispatch_sos_hypercall(). Remove the use of vm_lock inside the
handler.
Tracked-On: #5411
Signed-off-by: Peter Fang <peter.fang@intel.com>
