Remove redundant DMAR MACROs for given platform_acpi_info files because
CONFIG_ACPI_PARSE_ENABLED is enabled for all boards by default. The DMAR
info for nuc7i7dnb is kept as reference in the case that ACPI_PARSE_ENABLED
is not set in Kconfig.
As DMAR info is not provided for apl-mrb, the platform_acpi_info.h under
apl-mrb config folder is meaningless, so also remove this file and let
hypervisor parse ACPI for apl-mrb;
Tracked-On: #3977
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The DMAR info is board specific so move the structure definition to board.c.
As a configruation file, the whole board.c could be generated by acrn-config
tool for each board.
Please note we only provide DMAR info MACROs for nuc7i7dnb board. For other
boards, ACPI_PARSE_ENABLED must be set to y in Kconfig to let hypervisor parse
DMAR info, or use acrn-config tool to generate DMAR info MACROs if user won't
enable ACPI parse code for FuSa consideration.
The patch also moves the function of get_dmar_info() to vtd.c, so dmar_info.c
could be removed.
Tracked-On: #3977
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The value of CONFIG_MAX_IOMMU and MAX_DRHDS are identical to DRHD_COUNT
which defined in platform ACPI table, so remove CONFIG_MAX_IOMMU_NUM
from Kconfig and link these three MACROs together.
Tracked-On: #3977
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hypcall_id has a type of uint64_t and should use 'llx' as
formatting flag instead of '%d'. Otherwise, we will get a
confusing error log when not-allowed hypercall occurs.
Without this patch:
[96707209us][cpu=1][sev=3][seq=2386]:hypercall -2147483548 is only allowed from SOS_VM!
With this patch:
[84613395us][cpu=1][sev=3][seq=2136]:hypercall 0x80000064 is only allowed from SOS_VM!
So, we can figure out which not-allowed hypercall has been triggered more conveniently.
BTW, this patch adds hypcall_id which triggered from non-ring0 into error log.
Tracked-On: #4012
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Now the default board memory size is 16 GB. However, ACRN support more and more boards
which may have memory size large than 16 GB. This patch try to filter e820 table which
is over top address space.
Tracked-On: #4007
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Now the e820 structure store ACRN HV memory layout, not the physical memory layout.
Rename e820 to hv_hv_e820 to show this explicitly.
Tracked-On: #4007
Signed-off-by: Li Fei1 <fei1.li@intel.com>
AP trampoline code should be accessible
to hypervisor only, this patch is to unmap
this region from service VM's EPT for security
reason.
Tracked-On: #3992
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. Print warning message instead of ASSERT when
the caller try to modify the attribute for
memory region that is not present.
2. To avoid above warning message for memory region
below 1M,its attribute may be updated by Service
VM when updating MTTR setting.
Tracked-On: #3992
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently, memory with size of 'CONFIG_LOW_RAM_SIZE' will be
allocated when 'get_direct_boot_ap_trampoline()' is called.
This patch refine the implementation of of above function, it
returns the base address of trampoline buffer when called, and
the memory is allocated when vboot module is initialized.
Tracked-On: #3992
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
We should use INIT signal to notify the vcpu threads when
powering off the hard RTVM. To achive this, we should set
the vcpu->thread_obj.notify_mode as SCHED_NOTIFY_INIT.
Patch (27163df9 hv: sched: add sleep/wake for thread object)
tries to set the notify_mode according `is_lapic_pt_enabled(vcpu)`
in function prepare_vcpu. But at this point, the is_lapic_pt_enabled(vcpu)
will always return false. Consequently, it will set notify_mode
as SCHED_NOTIFY_IPI. Then leads to the failure of powering off
hard RTVM.
This patch fixes it by:
- Initialize the notify_mode as SCHED_NOTIFY_IPI in prepare_vcpu.
- Set notify_mode as SCHED_NOTIFY_INIT after guest is trying to
enable x2apic mode of passthru lapic.
Tracked-On: #3975
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
After adding PCI BAR remap support, mmio_node may unregister when there's others
access it. This patch add a lock to protect mmio_node access.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Concurrent access on PCI device may happened if UOS try to access PCI configuration
space on different vCPUs through IO port. This patch just adds a global PCI lock for
each VM to prevent the concurrent access.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Refine PCI CONFIG_ADDRESS Register definition as its physical layout.
In this case, we could read/write PCI CONFIG_ADDRESS Register atomically.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Unmap old mappings in vdev_pt_write_vbar explicitly before set_vbar_base.
Then map new mappings explicitly in vdev_pt_write_vbar.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Since guest could re-program PCI device MSI-X table BAR, we should add mmio
emulation handler unregister.
However, after add unregister_mmio_emulation_handler API, emul_mmio_regions
is no longer accurate. Just replace it with max_emul_mmio_regions which records
the max index of the emul_mmio_node.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
In theory, guest could re-program PCI BAR address to any address. However, ACRN
hypervisor only support [0, top_address_space) EPT memory mapping. So we need to
check whether the PCI BAR re-program address is within this scope.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN currently uses 2MB large pages in the page tables setup
for trampoline code and data. This patch lets ACRN use 1GB large
pages instead.
When it comes to fixing symbols in trampoline code, fixing pointers
in PDPT is no more needed as PDPT PTEs contain Physical Address.
Tracked-On: #3899
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch makes the following changes:
- Remove the 4th VM
- Make the default vcpu num of RTVM as 2
---
v1 -> v2: Modify CONFIG_MAX_VM_NUM to 3U + KATA
Tracked-On: #3925
Signed-off-by: Yan, Like <like.yan@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
kick means to notify one thread_object. If the target thread object is
running, send a IPI to notify it; if the target thread object is
runnable, make reschedule on it.
Also add kick_vcpu API in vcpu layer to notify vcpu.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
After moving softirq to following interrupt path, softirq handler might
break in the schedule spinlock context and try to grab the lock again,
then deadlock.
Disable interrupt with schedule spinlock context.
For the IRQ disable/restore operations:
CPU_INT_ALL_DISABLE(&rflag)
CPU_INT_ALL_RESTORE(rflag)
each takes 50~60 cycles.
renaming: get_schedule_lock -> obtain_schedule_lock
Tracked-On: #3813
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Clean up do_swtich and do switch related things in schedule().
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch decouple some scheduling logic and abstract into a scheduler.
Then we have scheduler, schedule framework. From modulization
perspective, schedule framework provides some APIs for other layers to
use, also interact with scheduler through scheduler interaces.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To get pcpu_id from sched_control quickly and easier.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
- The default behaviors of PIO & MMIO handlers are same
for all VMs, no need to expose dedicated APIs to register
default hanlders for SOS and prelaunched VM.
Tracked-On: #3904
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
'info.pmsi_addr' may be written to physicall device's
PCI configuration field without initialization when
'enable' is false in 'vmsi_remap()'.
this patch is to fix above issues, 'PCIR_MSI_ADDR'
and 'PCIR_MSI_ADDR_HIGH' only be programmed when
'enable' is true.
Tracked-On: #3903
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Currently the parameter of init_ept_mem_ops is
'struct acrn_vm *vm' for this api,change it to
'struct memory_ops *mem_ops' and 'vm_id' to avoid
the reversed dependency, page.c is hardware layer and vm structure
is its upper-layer stuff.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Let init thread end with run_idle_thread(), then idle thread take over and
start to do scheduling.
Change enter_guest_mode() to init_guest_mode() as run_idle_thread() is removed
out of it. Also add run_thread() in schedule module to run
thread_object's thread loop directly.
rename: switch_to_idle -> run_idle_thread
Tracked-On: #3813
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
sleep one thread_object means to prevent it from being scheduled.
wake one thread_object is an opposite operation of sleep.
This patch also add notify_mode in thread_object to indicate how to
deliver the request.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, we have three valid status for thread_object:
THREAD_STS_RUNNING,
THREAD_STS_RUNNABLE,
THREAD_STS_BLOCKED.
This patch also provide several helpers to check the thread's status and
a status set wrapper function.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
schedule infrastructure is per pcpu, so move its initialization to each
pcpu's initialization.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To support cpu sharing, multiple vcpu can run on same pcpu. We need do
necessary vcpu context switch. This patch add below actions in context
switch.
1) fxsave/fxrstor;
2) save/restore MSRs: MSR_IA32_STAR, MSR_IA32_LSTAR,
MSR_IA32_FMASK, MSR_IA32_KERNEL_GS_BASE;
3) switch vmcs.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With cpu sharing enabled, per_cpu vcpu cannot work properly as we might
has multiple vcpus running on one pcpu.
Add a schedule API sched_get_current to get current thread_object on
specific pcpu, also add a vcpu API get_running_vcpu to get corresponding
vcpu of the thread_object.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With cpu sharing enabled, we will map acrn_vcpu to thread_object
in scheduling. From modulization perspective, we'd better hide the
pcpu_id in acrn_vcpu and move it to thread_object.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vcpu thread's stack shouldn't follow reset_vcpu to reset.
There is also a bug here:
while vcpu B thread set vcpu->running to false, other vcpu A thread
will treat the vcpu B is paused while it has not been switch out
completely, then reset_vcpu will reset the vcpu B thread's stack and
corrupt its running context.
This patch will remove the vcpu thread's stack reset from reset_vcpu.
With the change, we need do init_vmcs between vcpu startup address be
settled and scheduled in. And switch_to_idle() is not needed anymore
as S3 thread's stack will not be reset.
Tracked-On: #3813
Signed-off-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Two time related synthetic MSRs are implemented in this patch. Both of
them are partition wide MSR.
- HV_X64_MSR_TIME_REF_COUNT is read only and it is used to return the
partition's reference counter value in 100ns units.
- HV_X64_MSR_REFERENCE_TSC is used to set/get the reference TSC page,
a sequence number, an offset and a multiplier are defined in this
page by hypervisor and guest OS can use them to calculate the
normalized reference time since partition creation, in 100ns units.
Tracked-On: #3831
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch implements the minimum set of TLFS functionality. It
includes 6 vCPUID leaves and 3 vMSRs.
- 0x40000001 Hypervisor Vendor-Neutral Interface Identification
- 0x40000002 Hypervisor System Identity
- 0x40000003 Hypervisor Feature Identification
- 0x40000004 Implementation Recommendations
- 0x40000005 Hypervisor Implementation Limits
- 0x40000006 Implementation Hardware Features
- HV_X64_MSR_GUEST_OS_ID Reporting the guest OS identity
- HV_X64_MSR_HYPERCALL Establishing the hypercall interface
- HV_X64_MSR_VP_INDEX Retrieve the vCPU ID from hypervisor
Tracked-On: #3832
Signed-off-by: wenwumax <wenwux.ma@intel.com>
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Change i915.domain_plane_owners and i915.avail_planes_per_pipe for
hybrid scenario;because some User vm(like:Ubuntu/Debian and WaaG)
doesn't support plane restriction; it will use PipeA by default.
Tracked-On: #3840
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
Consider the following case when TPR shadow is used with vlapic
basic mode:
1) 2 interrupts are pending in vlapic. INTa's priority > TPR and
INTb's priority <= TPR.
2) TPR threshold is set to zero and INTa is injected to guest.
3) Guest set TPR to the priority of INTa.
4) EOI of INTa. PPR is updated to TPR which equals INTa's priority.
INTb cannot be injected because its priority <= PPR.
5) Guest set TPR to zero. Because TPR threshold is still zero, there is
no TPR threshold vmexit. But since both TPR and ISRV are zero at
this time, the PPR is zero as well. INTb still cannot be injected.
This is a bug.
By adding vcpu_make_request(vlapic->vcpu, ACRN_REQUEST_EVENT) in EOI,
TPR threshold will be updated before vm_resume.
Tracked-On: #3795
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently we are using a 1:1 mapping logic for pcpu:vcpu. So don't need
a runqueue for it. Removing it as preparation work to abstract scheduler
framework.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
PRMRR related MSRs need to be configured by platform BIOS / bootloader.
These settings are not allowed to be changed by guest.
VMs currently have no requirement to access these MSRs even when vSGX is enabled.
So, this patch disables PRMRR related MSRs in VM.
Tracked-On: #3739
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
--remove unnecessary includes
--remove unnecssary forward-declaration for 'struct vhm_request'
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
The MSI Message Address and Message Data have no valid data after Power-ON. So
there's no need to initialize them by reading the data from physical PCI configuration
space.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
this patch is to fix error debug message
for invalid 'param' case, there is no string
variable for '%s' output, which will potenially
trigger hypervisor crash as it may access random
memroy address and trigger SMAP violation.
Tracked-On: #3801
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
We only support Type 0 and Type 1 PCI device. Remove PC-Card type support which
was originally described in the [PC-Card] and is used in previous versions of
the programming model.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
When a VM is configured with LAPIC PT mode and its vCPU is in x2APIC
mode, the corresponding pCPU needs to be reset during VM shutdown/reset
as its physical LAPIC was used by its guest.
This commit fixes an issue where this reset never happens.
is_lapic_pt_enabled() needs to be called before reset_vcpu() to be able
to correctly reflect a vCPU's APIC mode.
A vCPU with LAPIC PT mode but in xAPIC mode does not require such reset,
since its physical LAPIC was not touched by its guest directly.
v2 -> v3:
- refine edge case detection logic
v1 -> v2:
- use a separate function to return the bitmap of LAPIC PT enabled pCPUs
Tracked-On: #3708
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Jack Ren <jack.ren@intel.com>
it uses builtin function(__builtin_popcountl)in bitmap_weight(),
it will use the 'popcnt' instruction,
this patch enable 'popcnt' instruction support in Makefile
Tracked-On: #3663
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
- update the function argument type to union
Declaring argument as pointer is not necessary since it
only does the comparison.
Tracked-On: #1842
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
To enable static configuration of different scenarios, we configure VMs
in HV code and prepare all nesserary resources for this VM in create VM
hypercall. It means when we create one VM through hypercall, HV will
read all its configuration and run it automatically.
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As we introduced vcpu_affinity[] to assign vcpus to different pcpus, the
old policy and functions are not needed. Remove them.
Tracked-On: #3663
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add this vcpu_affinity[] for each VM to indicate the assignment policy.
With it, pcpu_bitmap is not needed, so remove it from vm_config.
Instead, vcpu_affinity is a must for each VM.
This patch also add some sanitize check of vcpu_affinity[]. Here are
some rules:
1) only one bit can be set for each vcpu_affinity of vcpu.
2) two vcpus in same VM cannot be set with same vcpu_affinity.
3) vcpu_affinity cannot be set to the pcpu which used by pre-launched VM.
v4: config SDC with CONFIG_MAX_KATA_VM_NUM
v5: config SDC with CONFIG_MAX_PCPU_NUM
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
There is plan that define each VM configuration statically in HV and let
DM just do VM creating and destroying. So DM need get vcpu_num
information when VM creating.
This patch return the vcpu_num via the API param. And also initial the
VMs' cpu_num for existing scenarios.
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MAX_PCPU_NUM is different on various BOARDs. So we move the generic
definition from Kconfig to each board's config header file.
Tracked-On: #3663
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Sometimes we need know the number of 1 in one bitmap. This patch provide
a inline function bitmap_weight for it.
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, we create vcpus while VM being created in hypervisor. The
create vcpu hypercall will not be used any more. For compatbility,
keep the hypercall HC_CREATE_VCPU do nothing.
v4: Don't remove HC_CREATE_VCPU hypercall, let it do nothing.
Tracked-On: #3663
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
it will panic if phys_cpu_num > CONFIG_MAX_PCPU_NUM
during init_pcpu_pre,after that no need to check it again.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
C99 supports variable-length array,
but misra-c required "variable-length array types shall not be used"
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
No need to memset since it will overwrite the memory
by copy_from_gpa in some cases.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Initialize vBAR configure space when doing vPCI BAR initialization. At this time,
we access the physical device as we needs, no need to cache physical PCI device
BAR information beforehand.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Add " with acrn-config" tag in build info when user build hypervisor with
acrn-config xmls would be helpful to identify the hypervisor configuration
in current build is from acrn-config xml or from source code.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
Previously we generate config patch based on config xml in toplevel Makefile,
it brings two issues:
1. we could not generate xml configuration patch with hypervisor source only;
2. The github commit info of current code base which is defined in version.h
will be overwritten by the new generated config patch, then the lost commit
info would impact build identify and bug reproducing.
This patch fixed these two issues. Besides, the patch also modify the logic of
platform_acpi_info file existence judgement, which need to be depends on the
acrn-config patch.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
TSC would be reset to 0 when enter suspend state on some platform.
This will fail the secure timer checking in secure world because
secure world leverage the TSC as source of secure timer which should
be increased monotonously.
This patch save/restore TSC in host suspend/resume path to guarantee
the mono increasing TSC.
Note: There should no timer setup before TSC resumed.
Tracked-On: #3697
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. if SCENARIO=$(SCENARIO) is specified in make param, then override
the default CONFIG_$(SCENARIO) value in existed .config. This means
we don't need to modify the default SCENARIO config in Kconfig file
to build the hypervisor;
2. Some board name shortcuts like apl-nuc/kbl-nuc-i7 need to be converted
to official board name to make sure overrides working;
3. Previously make sbl-hypervisor did not load the defconfig so the
defconfig for boards are lost, this patch fix this issue;
4. remove SCENARIO param when make hypervisor, because SCENARIO could
be got from SCENARIO_NAME which parsed from .config;
Tracked-On: #3593
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
The orignal communication port will lose data when tx is too fast, and
the data in FIFO will be overwritten.
Now, when the FIFO is full, stop sending more data. When the FIFO is not
full, notify the vuart to send more data.
Tracked-On: #3681
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For communication vuart, when it send data to target vuart's fifo, it
should meet the conditions:
1. MCR_LOOPBACK is not set
2. LCR_DLAB is not set
3. access reg is UART16550_THR
4. target_vu is not null
But the LCR_DLAB is missed now, and when vuart set it's UART16550_DLL,
it will be send to target by mistake as UART16550_DLL = UART16550_THR.
Add the missed condition.
DLAB in uart16550 spec:
Divisor Latch Access Bit.
1 = Allows access to the Divisor Latch Registers and reading of the FIFO
Control Register.
0 = Allows access to RBR, THR, IER and IIR registers.
Tracked-On: #3681
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Reserve memory for hv sbuf to avoid its possible overwriting on kernel memory.
For apl-up2, move hv_log address to 0x5de00000 to avoid possible conflict with
HV_RAM which start from 0x5e000000;
For nuc6cayh, move HV_RAM_START to 0x20000000 to avoid possible conflict with
hv_log which start from 0x1fe00000;
Tracked-On: #3533
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
In "commit 6ebc22" the vPCI device initialize sequence is wrong changed. This patch
tries to revert it.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
In "commit 90480d" we use a pointer new_owner to point to the actual vPCI device
for post-launched VM when this device is assigned to this post-launched VM from
SOS. However, now DM will use SOS's vmsix_table_mmio_access_handler to trap vMSI-X
table mmio access for post-launched VM. So we should use the post-launched VM's
vPCI device in this case.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Now the structures(run_context & ext_context) are defined
in vcpu.h,and they are used in the lower-layer modules(wakeup.S),
this patch move down the structures from vcpu.h to cpu.h
to avoid reversed dependency.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now the structures(union source & struct intr_source) are defined
in ptdev.h,they are used in vtd.c and assign.c,
vtd is the hardware layer and ptdev is the upper-layer module
from the modularization perspective, this patch move down
these structures to avoid reversed dependency.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Using per_cpu list to record ptdev interrupts is more reasonable than
recording them per-vm. It makes dispatching such interrupts more easier
as we now do it in softirq which happens following interrupt context of
each pcpu.
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
From modulization perspective, it's not suitable to put pcpu and vm
related request operations in schedule. So move them to pcpu and vm
module respectively. Also change need_offline return value to bool.
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Now, we have assumption that SOS control whether the platform
should enter S5 or not. So when SOS tries enter S5, we just
forward the S5 request to native port which make sure platform
S5 is totally aligned with SOS S5.
With higher serverity guest introduced,this assumption is not
true any more. We need to extend the platform S5 process to
handle higher severity guest:
- For DM launched RTVM, we need to make sure these guests
is off before put the whole platfrom to S5.
- For pre-launched VM, there are two cases:
* if os running in it support S5, we wait for guests off.
* if os running in it doesn't support S5, we expect it
will invoke one hypercall to notify HV to shutdown it.
NOTE: this case is not supported yet. Will add it in the
future.
Tracked-On: #3564
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
do_acpi_s3 actually not limit to do s3 operation. It depends on
the paramters pm1a_cnt_val and pm1b_cnt_val. It could be s3/s5.
Update the function name from xx_s3 to xx_sx.
Tracked-On: #3564
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently nuc7i7dnb board is using default platform acpi info file so causes
S3/S5 not working properly.
This patch updates the correct ACPI info for nuc7i7dnb board.
Tracked-On: #3609
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
vPCI device should use its virtual configure space to access its BAR after vPCI
device initialized.
This patch also remove corner case "vPCI device will use its 64 bits BAR high idx
to access its BAR base address".
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
PCI BAR physical base address will never changed. Cache it to avoid calculating
it every time when we access it.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
When we support PCI MSI-X table BAR remapping, we may re-delete the MSI-X table BAR
region. This patch removes strict check for deleting page table mapping.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
The current implement only do "only add a page table mapping for a region when
it's not mapped" check when this page table entry is a PTE entry. However, it
need to do this check for PDPTE entry and PDE entry too.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
pcpu_active_bitmap was read continuously in wait_pcpus_offline(),
acrn_vcpu->running was read continuously in pause_vcpu(),
add volatile keyword to ensure that such accesses are not
optimised away by the complier.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
As the pr_dbg will access sbuf which will call stac/clac inside, so can
not put pr_dbg between stac/clac, it will case Page Fault.
acrn_print_request is a debug feature, and it calls pr_dbg. when the
loglevel is set to 6, there will be Page Fault.
So, remove the caller for acrn_print_request and mask the function as
unused, reserved for debug.
Tracked-On: #3648
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
We did following to do platform reset:
1. Try ACPI reset first if it's available
2. Then try 0xcf9 reset method
3. if 2 fails, try keyboard reset method
This introduces some timing concern which needs be handled carefully.
We change it by following:
assume the platforms which ACRN could be run on must support either
ACPI reset or 0xcf9 reset. And simplify platform reset operation
a little bit:
If ACPI reset register is generated
try ACPI reset
else
try 0xcf9 reset method
Tracked-On: #3609
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
change the input parameter from vcpu to eptp in order to let this api
more generic, no need to care normal world or secure world.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Currently, the clos id of the cpu cores in vmx root mode is the same as non-root mode.
For RTVM, if hypervisor share the same clos id with non-root mode, the cacheline may
be polluted due to the hypervisor code execution when vmexit.
The patch adds hv_clos in vm_configurations.c
Hypervisor initializes clos setting according to hv_clos during physical cpu cores initialization.
For RTVM, MSR auto load/store areas are used to switch different settings for VMX root/non-root
mode for RTVM.
Tracked-On: #2462
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
-- remove some unnecessary includes
-- fix a typo
-- remove unnecessary void before launch_vms
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Fix tsc_deadline issue by trapping TSC_DEADLINE msr write if VMX_TSC_OFFSET is not 0.
Because there is an assupmtion in the ACRN vART design that pTSC_Adjust and vTSC_Adjust are
both 0.
We can leave the TSC_DEADLINE write pass-through without correctness issue becuase there is
no offset between the pTSC and vTSC, and there is no write to vTSC or vTSC_Adjust write observed
in the RTOS so far.
This commit fix the potential correctness issue, but the RT performance will be badly affected
if vTSC or vTSC_Adjust was not zero, which we will address if such case happened.
Tracked-On: #3636
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN HV is designed/implemented with "invariant TSC" capability, which wasn't checked at boot time.
This commit adds the "invairant TSC" detection, ACRN fails to boot if there wasn't "invariant TSC" capability.
Tracked-On: #3636
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We are trying to add both industry and sdc images to CL build. To
maintain the build interface unchanged (no change from CL side), we
extend the build command to generate the different target images.
To identity different images, we use rule:
$(HV_FILE).$(BOARD).$(FIRMWARE).$(SCENARIO)
as target image file name.
Tracked-On: #3593
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
ROOT_ENTRY_LOWER_CTP_MASK shall be (0xFFFFFFFFFFFFFUL << ROOT_ENTRY_LOWER_CTP_POS)
rather than (0xFFFFFFFFFFFFFUL).
Rationale:
CTP is bits 63:12 in a root entry according to Chapter 9.1 Root Entry in
VT-d spec.
Similarly, update ROOT_ENTRY_LOWER_PRESENT_MASK to keep the coding style
consistent.
CTX_ENTRY_UPPER_DID_MASK shall be (0xFFFFUL << CTX_ENTRY_UPPER_DID_POS)
rather than (0x3FUL << CTX_ENTRY_UPPER_DID_POS).
Rationale:
DID is bits 87:72 in a context entry according to Chapter 9.3 Context
Entry in VT-d spec. It takes 16 bits rather than 6 bits.
Tracked-On: #3626
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now that ACPI is enabled for pre-launched VMs, we can remove all mptable code.
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Statically define the per vm RSDP/XSDT/MADT ACPI template tables in vacpi.c,
RSDP/XSDT tables are copied to guest physical memory after checksum is
calculated. For MADT table, first fix up process id/lapic id in its lapic
subtable, then the MADT table's checksum is calculated before it is copies to
guest physical memory.
Add 8-bit checksum function in util.h
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Move 8-bit sum code to a separate new function calculate_sum8() in
util.h and replace the old code with a call to calculate_sum8()
Minor code cleanup in found_rsdp() to make it more readable. Both break and
continue statements are used in a single for loop, changed to only use break
statement to make the logic simpler.
Fixed some coding style issues reported by checkpatch.pl for file
hypervisor/boot/acpi_base.c
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Minor cosmetic fixes in acpi.h:
Move and group similar defines together
Rename RSDP_CHECKSUM_LENGTH to ACPI_RSDP_CHECKSUM_LENGTH
Add post fix 'U' to define as unsinged int and change code accordingly
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
All tables and structs must be byte packed to match ACPI
specification, also use __packed in place of __attribute__((packed))
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Currently ACPI related defines/structs are scattered across multiple C
source files, move them into acpi.h so that they can be shared and used by
vacpi code (to be added in subsequent commits).
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Cacheline is flushed on EPT entry change, no need to invalidate cache globally
when VM created per VM.
Tracked-On: #3607
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
EPT tables are shared by MMU and IOMMU.
Some IOMMUs don't support page-walk coherency, the cpu cache of EPT entires
should be flushed to memory after modifications, so that the modifications
are visible to the IOMMUs.
This patch adds a new interface to flush the cache of modified EPT entires.
There are different implementations for EPT/PPT entries:
- For PPT, there is no need to flush the cpu cache after update.
- For EPT, need to call iommu_flush_cache to make the modifications visible
to IOMMUs.
Tracked-On: #3607
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
VT-d shares the EPT tables as the second level translation tables.
For the IOMMUs that don't support page-walk coherecy, cpu cache should
be flushed for the IOMMU EPT entries that are modified.
For the current implementation, EPT tables for translating from GPA to HPA
for EPT/IOMMU are not modified after VM is created, so cpu cache invlidation is
done once per VM before starting execution of VM.
However, this may be changed, runtime EPT modification is possible.
When cpu cache of EPT entries is invalidated when modification, there is no need
invalidate cpu cache globally per VM.
This patch exports iommu_flush_cache for EPT entry cache invlidation operations.
- IOMMUs share the same copy of EPT table, cpu cache should be flushed if any of
the IOMMU active doesn't support page-walk coherency.
- In the context of ACRN, GPA to HPA mapping relationship is not changed after
VM created, skip flushing iotlb to avoid potential performance penalty.
Tracked-On: #3607
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
-- move 'RFLAGS_AC' to cpu.h
-- move 'VMX_SUPPORT_UNRESTRICTED_GUEST' to msr.h
and rename it to 'MSR_IA32_MISC_UNRESTRICTED_GUEST'
-- move 'get_vcpu_mode' to vcpu.h
-- remove deadcode 'vmx_eoi_exit()'
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move some data structures and APIs related host reset
from vm_reset.c to pm.c, these are not related with guest.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The vCOM2 of each VM is designed for VM communication, one VM could send
command or request to another VM through this channel. The feature will
be used for system S3/S5 implementation.
On Hybird scenario, vCOM2 of pre-launched VM will connect to vCOM2 of SOS_VM;
On Industry scenario, vCOM2 of post-launched RTVM will connect to vCOM2 of
SOS_VM.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
The settings of SOS VM COM1 which is used for console is board specific,
and this result in SOS VM COM2 which used for VM communication is also
board specific, so move the configure method from Kconfig to board configs
folder. The MACRO definition will be handled by acrn-config tool in future.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Set sos root device of apl-up2 to mmcblk0p3 and let UP2 uefi variant
and sbl variant share one config for now.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Now, we use native gdt saved in boot context for guest and assume
it could be put to same address of guest. But it may not be true
after the pre-launched VM is introduced. The gdt for guest could
be overwritten by guest images.
This patch make 32bit protect mode boot not use saved boot context.
Insteadly, we use predefined vcpu_regs value for protect guest to
initialize the guest bsp registers and copy pre-defined gdt table
to a safe place of guest memory to avoid gdt table overwritten by
guest images.
Tracked-On: #3532
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently, 'flags' is defined and set but never be used
in the flow of handling i/o request after then.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Enable console vuart for the reset of VMs in industry scenario.
Tracked-On: #3370
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
In the definition of port i/o handler, struct acrn_vm * pointer
is redundant as input, as context of acrn_vm is aleady linked
in struct acrn_vcpu * by vcpu->vm, 'vm' is not required as input.
this patch removes argument '*vm' from 'io_read_fn_t' &
'io_write_fn_t', use '*vcpu' for them instead.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Check whether the address area pointed by the guest
cr3 is valid or not before loading pdptrs. Inject #GP(0)
to guest if there are any invalid cases.
Tracked-On: #3572
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
fix violations touched below:
1.Cast operation on a constant value
2.signed/unsigned implicity conversion
3.return value unused.
V1->V2:
1.bitmap api will return boolean type, not need to check "!= 0", deleted.
2.The behaves ~(uint32_t)X and (uint32_t)~X are not defined in ACRN hypervisor Coding Guidelines,
removed the change of it.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
This patch moves vmx_rdmsr_pat/vmx_wrmsr_pat from vmcs.c to vmsr.c,
so that these two functions would become internal functions inside
vmsr.c.
This approach improves the modularity.
v1 -> v2:
* remove 'vmx_rdmsr_pat'
* rename 'vmx_wrmsr_pat' with 'write_pat_msr'
Tracked-On: #1842
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Hardcode "RELEASE=0" will cause the value of "CONFIG_RELEASE"
to be 'n' in kconfig.mk, it will be overwritten "CONFIG_RELEASE"
with Kconfig setting.
Tracked-On: #3565
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
When assgined a PCI PTDev to post-launched VM from SOS, using a pointer to point to
the real struct pci_vdev. When post-launched VM access its PTDev configure space in
SOS address space, using this real struct pci_vdev.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Add a field (vdev_ops) in struct acrn_vm_pci_dev_config to configure a PCI CFG
operation for an emulated PCI device. Use pci_pt_dev_ops for PCI_DEV_TYPE_PTDEV
by default if there's no such configure.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add emulated PCI device configure for SOS to prepare for add support for customizing
special pci operations for each emulated PCI device.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
now the dependency is like this in Makefile:
acrn.bin << xxxx.a << xxxx.obj
if excute 'make' in hypervsior fold for the first time,
it can generate acrn.bin, if excute 'make' for second
time, it can not do the final link because there are
the same timestamp for acrn.bin and xxxx.a generated by
previous build, add PHONY to fix this issue.
Tracked-On: #3542
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
String buffer temp_str is defined with size TEMP_STR_SIZE(60U) but accessed with MAX_STR_SIZE(256U). Better to limit the access bound to TEMP_STR_SIZE to prevent potential issue.
Tracked-On: #3549
Signed-off-by: Yifan Luo <luoyifan@cmss.chinamobile.com>
Create an iommu domain for all guest in vpci_init no matter if there's a PTDev
in it.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Dongsheng Zhang <dongsheng.x.zhang@intel.com>
Now almost the vPCI device information could be obtain from PCI device configure
in VM configure. init_vdevs could make things more easier.
And rename init_vdevs to vpci_init_vdevs, init_vdev to vpci_init_vdevs to avoid
MISRA-C violations.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Dongsheng Zhang <dongsheng.x.zhang@intel.com>
Align SOS pci device configure with pre-launched VM and filter pre-launched VM's
PCI PT device from SOS pci device configure.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
pci_dev_config in VM configure stores all the PCI devices for a VM. Besides PT
devices, there're other type devices, like virtual host bridge. So rename ptdev
to pci_dev for these configure.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For non-trusty hypercalls, HV should inject #GP(0) to vCPU if they are
from non-ring0 or inject #UD if they are from ring0 of non-SOS. Also
we should not modify RAX of vCPU for these invalid vmcalls.
Tracked-On: #3497
Signed-off-by: Victor Sun <victor.sun@intel.com>
In current code, the timer_list for per cpu can be accessed both in
vmexit and softirq handler. There is a case that, the timer_list is
modifying in vmexit, but an interrupt occur, the timer_list is also
modified in softirq handler. So the time_list may in unpredictable
state. In some platforms, the hv console may hang as its timer handler
is not invoked because of the corruption for timer_list.
So, to fix the issue, disable the interrupt before modifying the
timer_list.
Tracked-On: #3512
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
In hybrid mode, pre-launched VM should have the highest severity to
handle platform reset, the flag should not be set in SOS VM;
Tracked-On: #3505
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In some case, guest need to get more information under virtual environment,
like guest capabilities. Basically this could be done by hypercalls, but
hypercalls are designed for trusted VM/SOS VM, We need a machenism to report
these information for normal VMs. In this patch, vCPUID leaf 0x40000001 will
be used to satisfy this needs that report some extended information for guest
by CPUID.
Tracked-On: #3498
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The policy of vART is that software in native can run in
VM too. And in native side, the relationship between the
ART hardware and TSC is:
pTSC = (pART * M) / N + pAdjust
The vART solution is:
- Present the ART capability to guest through CPUID leaf
15H for M/N which identical to the physical values.
- PT devices see the pART (vART = pART).
- Guest expect: vTSC = vART * M / N + vAdjust.
- VMCS.OFFSET = vTSC - pTSC = vAdjust - pAdjust.
So to support vART, we should do the following:
1. if vAdjust and vTSC are changed by guest, we should change
VMCS.OFFSET accordingly.
2. Make the assumption that the pAjust is never touched by ACRN.
For #1, commit "a958fea hv: emulate IA32_TSC_ADJUST MSR" has implementation
it. And for #2, acrn never touch pAdjust.
--
v2 -> v3:
- Add comment when handle guest TSC_ADJUST and TSC accessing.
- Initialize the VMCS.OFFSET = vAdjust - pAdjust.
v1 -> v2
Refine commit message to describe the whole vART solution.
Tracked-On: #3501
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add to include acrn.32.out during cl rpm
generation as acrn.(board).32.out
This is required for Hybrid mode bringup in multios
Tracked-On:#3487
Signed-off-by: Nikhil Rane <nikhil.rane@intel.com>
To fix below err format:
"%s" is used to output 'secondary_bus' with type of 'uint8_t'
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
In lib/string.c, strncmp doesn't consider condition "n_arg=0",
just add a process to "n_arg=0".
Tracked-On: projectacrn/acrn-hypervisor#3466
Signed-off-by: YanX Fu <yanx.fu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The CONFIG_BOARD value in defconfig should match with Makefile, otherwise
the build might be failed in some condition.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
This patch is to clean-up acrn-hypervisor root directory, targt only 5 folders under acrn-hypervisor:1.hypervisor,2.devicemodel,3.misc,4.doc,5.build
Tracked-On: #3482
Signed-off-by: Terry Zou <terry.zou@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently the Px Cx supported SoCs which listed in cpu_state_tbl.c is limited,
and it is not a wise option to build a huge state table data base to support
Px/Cx for other SoCs. This patch give a alternative solution that build a board
specific cpu state table in board.c which could be auto-generated by offline
tool, then the CPU Px/Cx of customer board could be enabled;
Hypervisor will search the cpu state table in cpu_state_tbl[] first, if not
found then go check board_cpu_state_tbl. If no matched cpu state table is found
then Px/Cx will not be supported;
Tracked-On: #3477
Signed-off-by: Victor Sun <victor.sun@intel.com>
The functions always return 0 so it makes sense to make them void functions
Tracked-On: #3475
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The caller function has already done the checking to make sure the req is targeted
for the called functions, so there is no need to do the same checking in called
functions.
Remove calling of is_bar_offset() in vdev_pt_read_cfg/vdev_pt_write_cfg:
In vpci.c's vpci_read_pt_dev_cfg and vpci_write_dev_cfg, vbar_access is called
first to make sure the req is targed for vdev pt (vbar emulation) before
dispatching the request to vdev_pt_read_cfg/vdev_pt_write_cfg, so there is no
need to call is_bar_offset() again to do the same checking in vdev_pt_read_cfg/vdev_pt_write_cfg.
The same goes for msicap_access/msixcap_access
vbar_access should only check if the req is for bar access, it should not care
about whether the bar access is 4 bytes or 4 bytes aligned. The called function
vdev_pt_write_vbar will check and ignore the write access if it is not 4 bytes or 4 bytes
aligned, although this is counted as a bar access.
vdev_pt_read_vbar will check if the read access is 4 bytes or 4 bytes
aligned, although this is counted as a bar access, set read value (*val) to
-1 if the access is not 4 bytes (or aligned).
Tracked-On: #3475
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
After "commit f0e1c5e init vcpu host stack when reset vcpu", SOS resume form S3
wants to schedule to vcpu_thread not the point where SOS enter S3. So we should
schedule to idel first then reschedule to execute vcpu_thread.
Tracked-On: #3387
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
When monitor/mwait is not supported, it still uses the inline assembly in
wait_sync_change. As it is not allowed based on MISRA-C, the asm wrapper
is used for pause scenario in wait_sync_change.
Tracked-On: #3442
Suggested-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Based on SDM Vol2 the monitor uses the RAX register to setup the address
monitored by HW. The mwait uses the rax/rcx as the hints that the process
will enter. It is incorrect that the same value is used for monitor/mwait.
The ecx in mwait specifies the optional externsions.
At the same time it needs to check whether the the value of monitored addr
is already expected before entering mwait. Otherwise it will have possible
lockup.
V1->V2: Add the asm wrappper of monitor/mwait to avoid the mixed usage of
inline assembly in wait_sync_change
v2-v3: Remove the unnecessary line break in asm_monitor/asm_mwait.
Follow Fei's comment to remove the mwait ecx hint setting that
treats the interrupt as break event. It only needs to check whether the
value of psync_change is already expected.
Tracked-On: #3442
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
When need hpa and hva translation before init_paging, we need hpa2hva_early and
hva2hpa_early since init_paging may modify hva2hpa to not be identical mapping.
Tracked-On: #2987
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
1) Using printf to warn if platform ram size configuration is wrong.
2) Using printf to warn if the platform is not supported by ACRN hypervisor.
Tracked-On: #2987
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Enable uart as early as possible to make things easier for debugging.
After this we could use printf to output information to the uart. As for
pr_xxx APIs, they start to work when init_logmsg is called.
Tracked-On: #2987
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Now if the uart is mapped to a PIO address space, the uart base address is a physical
PIO address; if it's mapped to a MMIO address space, the uart base address is a
virtual MMIO address. Add union uart_addr structure to imply this.
And define a console_uart structure to add all uart related fields into this structure.
Tracked-On: #2987
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
PMC is hidden from guest and hypervisor should
inject UD to guest when 'rdpmc' vmexit.
Tracked-On: #3453
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Per SDM, writing 0 to MSR_IA32_MCG_STATUS is allowed, HV should not
return -EACCES on this case;
Tracked-On: #3454
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The vbar info which hard-coded in scenarios/logical_partition/pt_dev.c
is board specific actually, so move these information to
arch/x86/configs/$(CONFIG_BOARD)/pci_devices.h.
Please be aware that the memory range of vBAR should exactly match with
the e820 layout of VM.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
This is a followup patch to fix the coding style issue introduced
in by commit "c2d25aafb889ade954af8795df2405a94024d860":
The unmodified pointer should be defined as const
Also addressed one comments from Fei to use reversed function call
in vpci_init_pt_dev and vpci_deinit_pt_dev.
Tracked-On: #3241
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
NUC7i7BNH is not a board name but a product name of KBL NUC, and it is
outdated to support LOGICAL_PARTITION scenario and HYBRID scenario.
NUC7i7DNH is the product name of KBL NUC that ACRN currently supported,
but its official board name is NUC7i7DNB, so change the folder name from
"nuc7i7bnh" to "nuc7i7dnb" under arch/x86/configs/.
Please refer more details on below documentation:
Intel® NUC Board/Kit NUC7i7DN Technical Product Specification
Tracked-On: #3446
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
'invept' is not expected in guest and hypervisor should
inject UD when 'invept' VM exit happens.
Tracked-On: #3444
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
To avoid acrn_handle_pending_request called twice within one vmexit,
we remove the error-prone "continue" in vcpu_thread.
And make vcpu shecheduled out if fatal error happens with vcpu.
Tracked-On: #3387
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Otherwise, the previous local variables in host stack is not reset.
Tracked-On: #3387
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
softirq shouldn't be bounded to vcpu thread. One issue for this
is shell (based on timer) can't work if we don't start any guest.
This change also is trying best to make softirq handler running
with irq enabled.
Also update the irq disable/enabel in vmexit handler to align
with the usage in vcpu_thread.
Tracked-On: #3387
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Now, we are trying to move softirq from vcpu thread context to
real softirq context (it was not real softirq context even it has
softirq name), we need to make sure all the spinlock could be
access from softirq handler to use spinlock_irqsave_obtain and
spinlock_irqrestore_release.
Tracked-On: #3387
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Because we depend on guest OS to switch x2apic mode to enable lapic pass-thru, vlapic is working at the early stage of booting, eg: in virtual boot loader.
After lapic pass-thru enabled, no interrupt should be injected via vlapic any more.
This commit resets the vlapic to clear the pending status and adds ptapic_ops to enforce that no more interrupt accepted/injected via vlapic.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
This commit adds ops to vlapic structure, and add an *ops parameter to vlapic_reset().
At vlapic reset, the ops is set to the global apicv_ops, and may be assigned
to other ops later.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per community requirement;up to three post-launched VM might be
needed for some automotive SDC system, so add SDC2 scenario to
satisfy this requirement.
Tracked-On: #3429
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
In release environment, binary files must be stripped in
order to remove debugging code sections and symbol information
that aid attackers in the process of disassembly and reverse
engineering.
Use '-s' linking option to remove symbol table and relocation
information from release binaries.
Tracked-On: #3427
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
When a VM send data to its communication vuart, the vuart driver should
inject a DR interrupt to target VM and also inject a THRE interrupt to
self VM. But the original code inject the THRE interrupt to target VM,
correct it in this patch.
Tracked-On: #3423
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When initialize secondary pcpu, pass INVALID_CPU_ID as param of init_pcpu_pre()
looks weird, so change the param type to bool to represent whether the pcpu is
a BSP or AP.
Tracked-On: #3420
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In x86 architecture, word/doubleword/quadword aligned read/write on its boundary
is atomic, so we may remove atomic load/store.
As for atomic set/clear, use bitmap_set/claer seems more reasonable. After replace
them all, we could remove them too.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
vCPU schedule state change is under schedule lock protection. So there's no need
to be atomic.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For pre-launched VMs and SOS, vCPUs are created on BSP one by one; For post-launched VMs,
vCPUs are created under vmm_hypercall_lock protection. So vcpu_create is called sequentially.
Operation in vcpu_create don't need to be atomic.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
For per-vCPU, EOI exit bitmap is a global parameter which should set or clear
atomically since there's no lock to protect this critical variable.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
ACRN Coding guidelines requires type conversion shall be explicity. However,
there's no need for this case since we could return bool directly.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now sched_object and sched_context are protected by scheduler_lock. There's no
chance to use runqueue_lock to protect schedule runqueue if we have no plan to
support schedule migration.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
It's a global parameter and could be set concurrently. So it should be set atomically.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fenwgei <fengwei.yin@intel.com>
Schedule context flag may set out of schedule lock protection, like NEED_OFFLINE
or NEED_SHUTDOWN_VM. So NEED_RESCHEDULE flag should be set atomically too.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
In grub 2.02, the flag of MULTIBOOT_INFO_HAS_CMDLINE is set even there is
no cmdline was configured. So we need to validate the content of cmdline
in multiboot info. If there is no cmdline exist, we should not do merge
cmdline for SOS VM.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
And use vhostbridge for both SOS and pre-launched VM.
Tracked-On: #3241
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
And use the ops based operations instead of direct access vdev
specific API.
Tracked-On: #3241
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It will be used to define pci vdev own ops. And high level API
will call this ops intead of invoking device specific functions
directly.
Tracked-On: #3241
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current design, devicemodel passes VM UUID to create VMs and hypervisor
would check the UUID whether it is matched with the one in VM configurations.
Kata container would maintain few UUIDs to let ACRN launch the VM, so
hypervisor need to add these UUIDs in VM configurations for Kata running.
In the hypercall of hcall_get_platform_info(), hypervisor will report the
maximum Kata container number it will support. The patch will add a Kconfig
to indicate the maximum Kata container number that SOS could support.
In current stage, only one Kata container is supported by SOS on SDC scenario
so add one UUID for Kata container in SDC VM configuration. If we want to
support Kata on other scenarios in the future, we could follow the example
of this patch;
Tracked-On: #3402
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
'pcpu_id' should be less than CONFIG_MAX_PCPU_NUM,
else 'per_cpu_data' will overflow. This commit fixes
this potential overflow issue.
Tracked-On: #3397
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
- To support grub multiboot for nuc6cayh, we should put hv ram start
at a suitable address;
- Enable HSUART controller at PCI 0:18.0 as HV serail port;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add ve820 table for apl nuc board to enable prelaunched VM on it;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN Coding guidelines requires two different types pointer can't
convert to each other, except void *.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN Coding guidelines requires two different types pointer can't
convert to each other, except void *.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
ACRN Coding guidelines requires two different types pointer can't
convert to each other, except void *.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
ACRN Coding guidelines requires type conversion shall be explicity.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In almost case, vLAPIC will only be accessed by the related vCPU. There's no
synchronization issue in this case. However, other vCPUs could deliver interrupts
to the current vCPU, in this case, the IRR (for APICv base situation) or PIR
(for APICv advanced situation) and TMR for both cases could be accessed by more
than one vCPUS simultaneously. So operations on IRR or PIR should be atomical
and visible to other vCPUs immediately. In another case, vLAPIC could be accessed
by another vCPU when create vCPU or reset vCPU which could be supposed to be
consequently.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
1) add a write memory barrier after setting pcpu_sync to one to let this change
visible to AP immediately.
2) there's only BSP will set pcpu_sync, so there's no memory order issue between CPUs.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In spite of vhm_req status could be updated in HV and DM on different CPUs, they
only change vhm_req status when they detect vhm_req status has been updated by
each other. So vhm_req status will not been misconfigured. However, before HV
sets vhm_req status to REQ_STATE_PENDING, vhm_req buffer filling should be visible
to DM. Add a write memory barrier to guarantee this.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Hypervisor exposes mitigation technique for Speculative
Store Bypass(SSB) to guests and allows a guest to determine
whether to enable SSBD mitigation by providing direct guest
access to IA32_SPEC_CTRL.
Before that, hypervisor should check the SSB mitigation support
on underlying processor, this patch is to add this capability check.
Tracked-On: #3385
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Fix the violations list below:
1.Function should have one return entry.
2.Do not use -- or ++ operation.
3.For loop should be simple, shall not use comma operations.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN Coding guidelines requires parameters need to add const prefix when the
parameter is not modified in its function or recursion function call.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
