The IOAPIC specification defined EOI register for 0x20 version. The
original vioapic code implemented this register but the version was
still export as 0x11.
Tried to set 0x20, the Linux kernel has't access this EOI register,
still rely on lapic to send eoi.
From Linux ioapic driver comments, it says that only send EOI via EOI
register when met IOAPIC hardware bug.
This patch removes all 0x20 IOAPIC code to reduce the code size.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
To make vioapic simpler, avoid lots of code to convert variable type
between uint8_t and uint32_t.
This patch changes all variable type of pin related variables to
uint32_t instead of original uint_8.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
During ioapic reset, some registers need to be set to the default value
which defined in ioapic spec.
So far, the vioapic function only be called by ioapic itself in
ioapic_init. And just invoked after calloc the vioapic object, so all
the content are already set to zero. But this vioapic_reset function be
exported as one API which maybe invoked by other scenarios in future.
So this patch resolves this potential issue.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The APIC ID field should be bit 24:27 in IOAPIC Identification register.
The bits 28:31 are reserved bits which need to be avoid touched.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
For level sensitive trigger mode, the vioapic should not deliver extra
interrupt to vlapic if the previous one hasn't received EOI.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Merge multiple if to switch-case. And set 0xFFFFFFFFU as the default
value of undefined address.
And the IOREGSEL register only bits 7:0 are defined, so mask the other
bits for read operation.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1, Remove vioapic_mmio_read/vioapic_mmio_write, and combine them to
vioapic_mmio_rw.
2, The vioapic_read/write are used for emulate the ioapic indirect
access logic. So change their name with vioapic_indirect as the prefix.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch changes vm resuming condition from VM_STARTED to VM_PAUSED
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Yuhong Tao <yuhong.tao@intel.com>
Reviewed-by: Like Yan <like.yan@intel.com>
This patch resolves vm state mismatch between vm and acrnd
which causes vm resuming failure
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Yuhong Tao <yuhong.tao@intel.com>
Reviewed-by: Like Yan <like.yan@intel.com>
This patch resolves acrnd does not notify vm stop state(suspend/shutdown) to
cbc_lifecycle after SOS enters suspend/shutdown, that causes cbc_lifecycle
cannot trigger SOS suspend/shutdown flow.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Like Yan <like.yan@intel.com>
The issue is "acrnctl list" command always returns error with "no vmname
provided" information.
The rootcause is that vmname is an invalid parameter, which does not contain
any vm information.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Yuhong Tao <yuhong.tao@intel.com>
Reviewed-by: Like Yan <like.yan@intel.com>
Remove structure vm_attr
Wrap two APIs alloc_vm_id and free_vm_id
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
'hv_main()' wraps several logic which has no dependencies
each other(enable VMX, prepare to create service os VM..),
in this case, split this function to make code logic clear.
remove 'is_vm0_bsp()' & 'hv_main()'
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add the parameter identifier for typedef function pointer.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
one/two_byte_opcodes is indexed by op_byte. So vie_op->op_byte is unnecessary.
This patch remove it and add a new variable opcode to instr_emul_vie.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
There are size2mask array to convert addsize to corresponding mask and function
vie_size2mask doing the same thing except validation check of addrsize.
Theoretically, addrsize can only be one of (1, 2, 4, 8). So, the check of addrsize
is unnecessary.
This patch remove vie_size2mask and use size2maks directly.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We have vm_set/get_register here. There is no need to wrap the function with
vie_read_register.
This patch remove it.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
In order to comply with MISRA C rules, renamed vairables
and function names starting with "_".
The major changes invloves mostly static function
names, as they are being called inside the same file
by a wrapper function.
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
MISRAC requires that the array size should be declared explicitly.
This patch fixes the issues caused by the arrays that are defined in
link_ram.ld.in or assembly file.
v1 -> v2:
* Update the solution based on the info from the following link.
https://sourceware.org/binutils/docs/ld/Source-Code-Reference.html
Fix pattern is like below:
extern char start_of_ROM, end_of_ROM, start_of_FLASH;
memcpy (& start_of_FLASH, & start_of_ROM, & end_of_ROM - &
start_of_ROM);
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
mevent is added only if uart backend fd refers TTY in uart_opentty.
So we should only delete mevent if uart backend fd refers TTY in uart_closetty.
This issue can be reproduced by below steps
1) acrnd starts UOS
2) run poweroff command in UOS
3) crash happens
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Reshuffle VMX init code, and check both allowed 0-settings and
1-settings of related MSR to make the final VMCS control value.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Change this API to void type
Add pre-condition, state the input parameters are not NULL.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- print error message for command parameter error
when callback/handler is called.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
According to ACPI spec, when system back to working mode from
S3, WAK_STS bit (15) should be set.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We do:
- pause target vm
- suspend all virtual devices
- wait for resume notification
- resume all virtual devices
- reset target vm
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When guest enter/exit S3, we need to do
1. stop watchdog timer when guest enter S3 to avoid watchdog
timer reset guest when guest is in S3 state.
2. reset watchdog timer when guest exit from S3.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Then, acrnctl could send command to monitor module of DM and call
functions defined in pm ops. One example is: acrnctl resume UOS
after UOS enter S3.
Also add general pm.c and move pm related function to this file.
Signed-off-by: Yan Like <like.yan@intel.com>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
And export the API to DM. DM will do system reboot/S3 resume based
on this API.
Also add the pre-assumption description for some vm APIs.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. We could explicitly use specific register to avoid one more
register allocated.
2. If we explicitly assign register, it's not neccessary to
add the register in clobber list according to gcc mannual.
3. For vmptrld, we add memory to clobber list also.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the C99 standard, the order of evaluation associated with
multiple #, multiple ## or a mix of # and ## preprocessor
operator is unspecified. For this case, gcc 7.3.0 manual
does not specify related implementation. So it is unsafe
to use multiple # or ## in a macro.
BTW, there are some macros with one or more "##" which are
not used by hypervisor.
Update relate codes to avoid using multiple # or ## in a macro;
Remove unused macros with one or more "##";
Remove "struct __hack;" at the end of GETCC since it is useless.
Note:
'##' operator usage constraints: A ## preprocessing token shall
not occur at the beginning or at the end of a replacement list
for either form of macro definition.
V1--V2:
Update relate codes to avoid using multiple # or ## in a macro.
V2-->V3:
Remove unused macros with one or more "##";
Remove "struct __hack;" at the end of GETCC since it is useless.
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Adding Kconfig option to choose and compile partitioning mode for ACRN.
Current implementation does not allow ACRN to support sharing mode
and partitioning mode out of a single binary.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
-- Check uart enabled flag, it will return if the flag is false.
-- Add function declaration (uart16550_set_property) in console.h
-- Remove unnecessary function declaration(get_serial_handle)
-- Change uart_enabled and port_mapped to bool
-- Fix MISRA-C integer violations
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix integer related violations.
V1->V2:
clean all memset/calloc integer violations excpet bsp/boot directory
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Default behavior is for figure captions below the figure, but table
captions above the table. Tweak the CSS for tables to put the caption
below instead.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
As first step to separate misc folder into github/intel/ioc-cbc-tools we
need let acrn create devel package. This package will let ioc-cbc-tools
use acrn manager interface API to control lifecycle.
The Clear Linux autospec script will *detect* /usr/include/acrn/*.h and
thus help us create the devel package. This devel pacakge will be in the
build_req for ioc-cbc-tools autospec.
Signed-off-by: Alek Du <alek.du@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Like Yan <like.yan@intel.com>
Fix the parameter type mismatch between API declaration and definition.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
to remove it as no requirement of bounding i/o handlers
dynamically in hypervisor shell
- update source code related with i/o session
- move shell command definitions from shell_pulic.c
to shell_internal.c
- remove shell_public.c
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
