To support full context switch scheduling, each physical
CPU must have its own idle sched_obj.
Tracked-On: #2394
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
We will use guest_flags of SECURE_WORLD_ENABLED to check wthether
sworld is supported.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch creates a new get_sos_vm() api to replace get_vm_from_vmid(0U)
because VM 0 might not be SOS VM now;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When pcpu enter guest mode, it will call launch_vms() function to launch
VMs in global vm_configs array.
In launch_vms() function, current pcpu will go through vm_config array list
and check whether it is a bsp of configured VM, if yes then it will prepare
corresponding VM and start it. The index of vm_config array will be specified
to VM id.
The first least significant bit in pcpu_bitmap means the bsp of the VM.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Under sharing mode, VM0 is identical with SOS VM. But the coupling of
SOS VM and VM 0 is not friendly for partition mode.
This patch is a pure term change of vm0 to sos VM, it does not change
any code logic or senmantic.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
to edge interrupt, like eth device, it can triger the interrupt again
when its IRQ in softirq entry queue or in timer list.
in current design, for sofrirq entry, it calls "list_del" before
"list_add_tail", to avoid the entry added twice.
so for interrupt delay timer, add to check if it is started
then just drop the next one; to avoid it enqueue twice.
Tracked-On: #2365
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
This patch is a pure term change of vm_description to vm_config,
the struct name of vm_description is changed to acrn_vm_config.
The patch does not change any code logic or senmantic.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently the SOS kernel will call hcall_set_callback_vector to config
the expected up-notification vector(0xF3) and then hypervisor uses the
passed vector to raise the interrupt to SOS when needed.
As sos kernel already switches to 0xF3 notification vector, the default
notification vector can be changed from 0xF7 to 0xF3. In such case it still
can work well even when the SOS kernel doesn't reconfigure the notification
vector.
Tracked-On: projectacrn/acrn-hypervisor#2355
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
-- Change acrn_vhm_vector to static, only used in io_request.c
-- Add set_vhm_vector() api, it will call this api instead of
acrn_vhm_vector except io_request.c
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When we use script to analyze the latency between vm_exit and vm_entry,
it does not include the duration of vm_exit handler.
The patch moves the vm_exit trace before vmexit_handler.
v2: move vm_exit trace right after run_vcpu.
Tracked-On: #2341
Signed-off-by: Zhipeng Gong <zhipeng.gong@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Misra C requires Function must have only 1 return entry.
Fixed it by use "if ... else ..." format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Misra C requires Function must have only 1 return entry.
Fixed it by use "if ... else ..." format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
IO completion polling will access vcpu and vm structs. If doing it in
idle thread, there might be some race issues between vm destroying and
idle thread. They are running on different cores.
Got suggestion from Fengwei, decouple the polling action from idle
thread and just do it in vcpu thread, then we can guarantee idle thread
in really idle status.
Tracked-On: #1821
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Now, need_reschedule will test_and_clear the bit NEED_RESCHEDULE in
schedule context, then call schedule. It is not a exact match with the
name.
This patch move the flag clearing into scheudle, and need_reschedule
just check and return.
Tracked-On: #1821
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Misra C requires Function must have only 1 return entry.
Fixed it by use "if ... else ..." format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix "Procedure has more than one exit point" by split the function into
two parts.
V1->V2:
compact the multiple lines into one.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix the complicated violations by methods list below:
1.if ... else ... fmt.
2.add status in proper position.
example:
bool bdf_valid;(could find this variable in this patch).
V1->V2:
merge branches.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fix the violations by the "if ... else ..." fmt.
V1->V2:
merge branches.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix the violations list below:
1.Procedure has more than one exit point.
2.Use of sizeof on an array parameter.
3.Expression needs brackets.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Misra C requires Function must have only 1 return entry.
Fixed it by use "if ... else ..." format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
use struct sched_object as the main interface of scheduling, then
make scheduler as an independent module to vcpu:
- add struct sched_object as one field in struct vcpu
- define sched_object.thread for switch_to thread
- define sched_object.prepare_switch_out/in for prepare_switch before
switch_to
- move context_switch_out/context_switch_in into vcpu.c as
vcpu.sched_obj.prepare_switch_out/in
- make default_idle as global idle.thread for idle_thread
- make vcpu_thread as vcpu.sched_obj.thread for each vcpu thread
- simplify switch_to based on sched_object
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <edide.dong@intel.com>
just use pcpu_id for make_reschedule_request is enough
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <edide.dong@intel.com>
add struct sched_object, and use it as input param instead of vcpu for
below functions:
- add_to_cpu_runqueue renamed from add_vcpu_to_runqueue
- remove_from_cpu_runqueue renamed from remove_vcpu_from_runqueue
- get_next_sched_obj added to get next sched object
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <edide.dong@intel.com>
Clean the io_request.c's violations reported by the misra tools.
V1->V2:
remove violations which checked with NULL.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fixs MISRAC violations in common/ptdev.c and include/common/ptdev.h
Tracked-On: #861
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
-- fix MISRA-C violation "procedure has more than one exit point"
for this api
-- change start_vm to void type since it is always return 0
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- 'buffer'with size of 'buffer_cnt', will overflow in
next loop if 'index == buffer_cnt - 1'.
Tracked-On: #1252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Misra C requires Function must have only 1 return entry.
Fixed it by use "if ... else ..." format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With SMAP enabled, hypervisor can't access pages that
owned by guest(either SOS or UOS), and an override is
is provided: stac()/clac() to enable/disable access to
guest's memory pages.
Pre-conditon:
Mark hypervisor owned pages as supervisor mode (U/S = 0),
and set all othter memory pages as user mode (U/S = 1).
Tracked-On: #2056
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch fixes incorrect vm_id captured when sampling PMU data. Currently,
the vm_id gets attributed to ACRN hypervisor, rather than actual guest vm_id.
The issue is identified that the existing code captures the guest vm info
after vmexit_hander function is completed, in which the profiling module
points its context to VMM. When the vmexit happens by PMI, the guest context
should be captured so that the attribution to proper guest vm can happen.
This change will also allow to capture more accurate TSC when vmexit happens.
Tracked-On: #2043
Signed-off-by: Min Lim <min.yeol.lim@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
They're some duplicated and strcpy_s is not safety as strncpy_s.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Huang, Yonghua <yonghua.huang@intel.com>
1. change its APIs as more indepentent, and modify the callers' code
2. limit its global variables as static, and return const to the callers
3. remove unused code in "CONFIG_CMA"
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. e820 is modulized as separated files.
2. move boot_regs into multiboot.h as it's related with
multiboot info header
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Identifier reuse may arise confusion. So should minimize the case of it
as much as possible. This patch is try to do this except the PCI related
module.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Implicit conversion may result in loss of information or undefined behaviour.
So make it with explicit conversion.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
There may the theoretic infinite loop with some code. But actually it doesn't.
This patch make these code more obvious it's not a potentially infinite loop.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
This patch adds the necessary space before or after binary operator.
v1 -> v2:
* minor fix related to integer
[i - 1] ====> [i - 1U]
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
replace CPU_PAGE_SIZE with PAGE_SIZE
These two MACROs are duplicated and PAGE_SIZE is a more reasonable name.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
