Move Cache/TLB arch specific parts into cpu.h
After this change, we should not expose arch specific parts out from mmu.h
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Allow guest set CR4_VMXE if CONFIG_NVMX_ENABLED is set:
- move CR4_VMXE from CR4_EMULATED_RESERVE_BITS to CR4_TRAP_AND_EMULATE_BITS
so that CR4_VMXE is removed from cr4_reserved_bits_mask.
- force CR4_VMXE to be removed from cr4_rsv_bits_guest_value so that CR4_VMXE
is able to be set.
Expose VMX feature (CPUID01.01H:ECX[5]) to L1 guests whose GUEST_FLAG_NVMX_ENABLED
is set.
Assuming guest hypervisor (L1) is KVM, and KVM uses EPT for L2 guests.
Constraints on ACRN VM.
- LAPIC passthrough should be enabled.
- use SCHED_NOOP scheduler.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
moving invvpid and invept helper code from mmu.c to mmu.h, so that they
can be accessed by the nested virtualization code.
No logical changes.
Tracked-On: #5923
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
TPAUSE, UMONITOR or UMWAIT instructions execution in guest VM cause
a #UD if "enable user wait and pause" (bit 26) of VMX_PROCBASED_CTLS2
is not set. To fix this issue, set the bit 26 of VMX_PROCBASED_CTLS2.
Besides, these WAITPKG instructions uses MSR_IA32_UMWAIT_CONTROL. So
load corresponding vMSR value during context switch in of a vCPU.
Please note, the TPAUSE or UMWAIT instruction causes a VM exit if the
"RDTSC exiting" and "enable user wait and pause" are both 1. In ACRN
hypervisor, "RDTSC exiting" is always 0. So TPAUSE or UMWAIT doesn't
cause a VM exit.
Performance impact:
MSR_IA32_UMWAIT_CONTROL read costs ~19 cycles;
MSR_IA32_UMWAIT_CONTROL write costs ~63 cycles.
Tracked-On: #6006
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Instead of "#include <x86/foo.h>", use "#include <asm/foo.h>".
In other words, we are adopting the same practice in Linux kernel.
Tracked-On: #5920
Signed-off-by: Liang Yi <yi.liang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Both Windows guest and Linux guest use the MSR MSR_IA32_CSTAR, while
Linux uses it rarely. Now vcpu context switch doesn't save/restore it.
Windows detects the change of the MSR and rises a exception.
Do the save/resotre MSR_IA32_CSTAR during context switch.
Tracked-On: #5899
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
TLFS spec defines that when a VM is created, the value of
HV_X64_MSR_TIME_REF_COUNT is set to zero. Now tsc_offset is not
supported properly, so guest get a drifted reference time.
This patch implements tsc_offset. tsc_scale and tsc_offset
are calculated when a VM is launched and are saved in
struct acrn_hyperv of struct acrn_vm.
Tracked-On: #5956
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In order to support platform (such as Ander Lake) which physical address width
bits is 46, the current code need to reserve 2^16 PD page ((2^46) / (2^30)).
This is a complete waste of memory.
This patch would reserve PD page by three parts:
1. DRAM - may take PD_PAGE_NUM(CONFIG_PLATFORM_RAM_SIZE) PD pages at most;
2. low MMIO - may take PD_PAGE_NUM(MEM_1G << 2U) PD pages at most;
3. high MMIO - may takes (CONFIG_MAX_PCI_DEV_NUM * 6U) PD pages (may plus
PDPT entries if its size is larger than 1GB ) at most for:
(a) MMIO BAR size must be a power of 2 from 16 bytes;
(b) MMIO BAR base address must be power of two in size and are aligned with
its size.
Tracked-On: #5929
Signed-off-by: Li Fei1 <fei1.li@intel.com>
No one uses get_mem_range_info to get the top/bottom/size of the physical memory.
We could get these informations by e820 table easily.
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: eddie Dong <eddie.dong@intel.com>
We used get_mem_range_info to get the top memory address and then use this address
as the high 64 bits max memory address. This assumes the platform must have high
memory space.
This patch calculates the high 64 bits max memory address according the e820 tables
and removes the assumption "The platform must have high memory space" by map the
low RAM region and high RAM region separately.
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: eddie Dong <eddie.dong@intel.com>
sanitize_pte is used to set page table entry to map to an sanitized page to
mitigate l1tf. It should belongs to pgtable module. So move it to pagetable.c
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
lookup_address is used to lookup a pagetable entry by an address. So rename it
to pgtable_lookup_entry to indicate this clearly.
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
alloc_page/free_page should been called in pagetable module. In order to do this,
we add pgtable_create_root and pgtable_create_trusty_root to create PML4 page table
page for normal world and secure world.
After this done, no one uses alloc_ept_page. So remove it.
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Add pgtable_create_trusty_root to allocate a page for trusty PML4 page table page.
This function also copy PDPT entries from Normal world to Secure world.
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Add pgtable_create_root to allocate a page for PMl4 page table page.
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Rename mmu_add to pgtable_add_map;
Rename mmu_modify_or_del to pgtable_modify_or_del_map.
And move these functions declaration into pgtable.h
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Requires explicit arch path name in the include directive.
The config scripts was also updated to reflect this change.
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Each .c file includes the arch specific irq header file (with full
path) by itself if required.
Tracked-On: #5825
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
A new x86/guest/virq.h head file now contains all guest
related interrupt handling API.
Tracked-On: #5825
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Move exception stack layout struct and exception/NMI handling
declarations from x86/irq.h into x86/cpu.h.
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The common irq file is responsible for managing the central
irq_desc data structure and provides the following APIs for
host interrupt handling.
- init_interrupt()
- reserve_irq_num()
- request_irq()
- free_irq()
- set_irq_trigger_mode()
- do_irq()
API prototypes, constant and data structures belonging to common
interrupt handling are all moved into include/common/irq.h.
Conversely, the following arch specific APIs are added which are
called from the common code at various points:
- init_irq_descs_arch()
- setup_irqs_arch()
- init_interrupt_arch()
- free_irq_arch()
- request_irq_arch()
- pre_irq_arch()
- post_irq_arch()
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
This is done be adding irq_rsvd_bitmap as an auxiliary bitmap
besides irq_alloc_bitmap.
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Arch specific IRQ data is now an opaque pointer in irq_desc.
This is a preparation step for spliting IRQ handling into common
and architecture specific parts.
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
This patch moves pgtable definition to pgtable.h and include the proper
header file for page module.
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move the EPT page table related APIs to ept.c. page module only provides APIs to
allocate/free page for page table page. pagetabl module only provides APIs to
add/modify/delete/lookup page table entry. The page pool and the page table
related APIs for EPT should defined in EPT module.
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Move the MMU page table related APIs to mmu.c. page module only provides APIs to
allocate/free page for page table page. pagetabl module only provides APIs to
add/modify/delete/lookup page table entry. The page pool and the page table
related APIs for MMU should defined in MMU module.
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
We would move the MMU page table related APIs to mmu.c and move the EPT related
APIs to EPT.c. The page table module only provides APIs to add/modify/delete/lookup
page table entry.
This patch separates common APIs and adds separate APIs of page table module
for MMU/EPT.
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
post_uos_sworld_memory are used for post-launched VM which support trusty.
It's more VM related. So move it definition into vm.c
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per-core software SRAM L2 cache may be flushed by 'mwait'
extension instruction, which guest VM may execute to enter
core deep sleep. Such kind of flushing is not expected when
software SRAM is enabled for RTVM.
Hypervisor disables MONITOR-WAIT support on both hypervisor
and VMs sides to protect above software SRAM from being flushed.
This patch disable ACRN guest MONITOR-WAIT support if software
SRAM is configured.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per-core software SRAM L2 cache may be flushed by 'mwait'
extension instruction, which guest VM may execute to enter
core deep sleep. Such kind of flushing is not expected when
software SRAM is enabled for RTVM.
Hypervisor disables MONITOR-WAIT support on both hypervisor
and VMs sides to protect above software SRAM from being flushed.
This patch disable hypervisor(host) MONITOR-WAIT support and refine
software sram initializaion flow.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Below boolean function are defined in this patch:
- is_software_sram_enabled() to check if SW SRAM
feature is enabled or not.
- set global variable 'is_sw_sram_initialized'
to file static.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The fields and APIs in old 'struct memory_ops' are used to add/modify/delete
page table (page or entry). So rename 'struct memory_ops' to 'struct pgtable'.
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use default_access_right field to replace get_default_access_right API.
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
RTVM is enforced to use 4KB pages to mitigate CVE-2018-12207 and performance jitter,
which may be introduced by splitting large page into 4KB pages on demand. It works
fine in previous hardware platform where the size of address space for the RTVM is
relatively small. However, this is a problem when the platforms support 64 bits
high MMIO space, which could be super large and therefore consumes large # of
EPT page table pages.
This patch optimize it by using large page for purely data pages, such as MMIO spaces,
even for the RTVM.
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Tracked-On: #5788
Add free_page to free page when unmap pagetable.
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Tracked-On: #5788
For FuSa's case, we remove all dynamic memory allocation use in ACRN HV. Instead,
we use static memory allocation or embedded data structure. For pagetable page,
we prefer to use an index (hva for MMU, gpa for EPT) to get a page from a special
page pool. The special page pool should be big enougn for each possible index.
This is not a big problem when we don't support 64 bits MMIO. Without 64 bits MMIO
support, we could use the index to search addrss not larger than DRAM_SIZE + 4G.
However, if ACRN plan to support 64 bits MMIO in SOS, we could not use the static
memory alocation any more. This is because there's a very huge hole between the
top DRAM address and the bottom 64 bits MMIO address. We could not reserve such
many pages for pagetable mapping as the CPU physical address bits may very large.
This patch will use dynamic page allocation for pagetable mapping. We also need
reserve a big enough page pool at first. For HV MMU, we don't use 4K granularity
page table mapping, we need reserve PML4, PDPT and PD pages according the maximum
physical address space (PPT va and pa are identical mapping); For each VM EPT,
we reserve PML4, PDPT and PD pages according to the maximum physical address space
too, (the EPT address sapce can't beyond the physical address space), and we reserve
PT pages by real use cases of DRAM, low MMIO and high MMIO.
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Tracked-On: #5788
memory_ops structure will be changed to store page table related fields.
However, secure world memory base address is not one of them, it's VM
related. So save sworld_memory_base_hva in vm_arch structure directly.
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Tracked-On: #5788
Accessing to software SRAM region is not allowed when
software SRAM is pass-thru to prelaunch RTVM.
This patch removes software SRAM region from service VM
EPT if it is enabled for prelaunch RTVM.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Fixing an incorrect struct definition for ir_bits in ioapic_rte. Since bits after
the delivery status in the lower 32 bits are not touched by code,
this has never showed up as an issue. And the higher 32 bits in the RTE
are aligned by the compiler.
Tracked-On: #5773
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
The logical processor scoped IWKey can be copied to or from a
platform-scope storage copy called IWKeyBackup. Copying IWKey to
IWKeyBackup is called ‘backing up IWKey’ and copying from IWKeyBackup to
IWKey is called ‘restoring IWKey’.
IWKeyBackup and the path between it and IWKey are protected against
software and simple hardware attacks. This means that IWKeyBackup can be
used to distribute an IWKey within the logical processors in a platform
in a protected manner.
Linux keylocker implementation uses this feature, so they are
introduced by this patch.
Tracked-On: #5695
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Different vCPU may have different IWKeys. Hypervisor need do the iwkey
context switch.
This patch introduce a load_iwkey() function to do that. Switches the
host iwkey when the switch_in vCPU satisfies:
1) keylocker feature enabled
2) Different from the current loaded one.
Two opportunities to do the load_iwkey():
1) Guest enables CR4.KL bit.
2) vCPU thread context switch.
load_iwkey() costs ~600 cycles when do the load IWKey action.
Tracked-On: #5695
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
KeyLocker is a new security feature available in new Intel CPUs that
protects data-encryption keys for the Advanced Encryption Standard (AES)
algorithm. These keys are more valuable than what they guard. If stolen
once, the key can be repeatedly used even on another system and even
after vulnerability closed.
It also introduces a CPU-internal wrapping key (IWKey), which is a key-
encryption key to wrap AES keys into handles. While the IWKey is
inaccessible to software, randomizing the value during the boot-time
helps its value unpredictable.
Keylocker usage:
- New “ENCODEKEY” instructions take original key input and returns HANDLE
crypted by an internal wrap key (IWKey, init by “LOADIWKEY” instruction)
- Software can then delete the original key from memory
- Early in boot/software, less likely to have vulnerability that allows
stealing original key
- Later encrypt/decrypt can use the HANDLE through new AES KeyLocker
instructions
- Note:
* Software can use original key without knowing it (use HANDLE)
* HANDLE cannot be used on other systems or after warm/cold reset
* IWKey cannot be read from CPU after it's loaded (this is the
nature of this feature) and only 1 copy of IWKey inside CPU.
The virtualization implementation of Key Locker on ACRN is:
- Each vCPU has a 'struct iwkey' to store its IWKey in struct
acrn_vcpu_arch.
- At initilization, every vCPU is created with a random IWKey.
- Hypervisor traps the execution of LOADIWKEY (by 'LOADIWKEY exiting'
VM-exectuion control) of vCPU to capture and save the IWKey if guest
set a new IWKey. Don't support randomization (emulate CPUID to
disable) of the LOADIWKEY as hypervisor cannot capture and save the
random IWKey. From keylocker spec:
"Note that a VMM may wish to enumerate no support for HW random IWKeys
to the guest (i.e. enumerate CPUID.19H:ECX[1] as 0) as such IWKeys
cannot be easily context switched. A guest ENCODEKEY will return the
type of IWKey used (IWKey.KeySource) and thus will notice if a VMM
virtualized a HW random IWKey with a SW specified IWKey."
- In context_switch_in() of each vCPU, hypervisor loads that vCPU's
IWKey into pCPU by LOADIWKEY instruction.
- There is an assumption that ACRN hypervisor will never use the
KeyLocker feature itself.
This patch implements the vCPU's IWKey management and the next patch
implements host context save/restore IWKey logic.
Tracked-On: #5695
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In order for a VMM to capture the IWKey values of guests, processors
that support Key Locker also support a new "LOADIWKEY exiting"
VM-execution control in bit 0 of the tertiary processor-based
VM-execution controls.
This patch enables the tertiary VM-execution controls.
Tracked-On: #5695
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
KeyLocker is a new security feature available in new Intel CPUs that
protects data-encryption keys for the Advanced Encryption Standard (AES)
algorithm.
This patch emulates Keylocker CPUID leaf 19H to support Keylocker
feature for guest VM.
To make the hypervisor being able to manage the IWKey correctly, this
patch doesn't expose hardware random IWKey capability
(CPUID.0x19.ECX[1]) to guest VM.
Tracked-On: #5695
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Bit19 (CR4_KL) of CR4 is CPU KeyLocker feature enable bit. Hypervisor
traps the bit's writing to track the keylocker feature on/off of guest.
While the bit is set by guest,
- set cr4_kl_enabled to indicate the vcpu's keylocker feature enabled status
- load vcpu's IWKey in host (will add in later patch)
While the bit is clear by guest,
- clear cr4_kl_enabled
This patch trap and passthru the CR4_KL bit to guest for operation.
Tracked-On: #5695
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
