MISRA C requires specified bounds for arrays declaration, previous declaration
of platform_clos_array in board.h does not meet the requirement.
Tracked-On: #3987
Signed-off-by: Victor Sun <victor.sun@intel.com>
Remove redundant DMAR MACROs for given platform_acpi_info files because
CONFIG_ACPI_PARSE_ENABLED is enabled for all boards by default. The DMAR
info for nuc7i7dnb is kept as reference in the case that ACPI_PARSE_ENABLED
is not set in Kconfig.
As DMAR info is not provided for apl-mrb, the platform_acpi_info.h under
apl-mrb config folder is meaningless, so also remove this file and let
hypervisor parse ACPI for apl-mrb;
Tracked-On: #3977
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The DMAR info is board specific so move the structure definition to board.c.
As a configruation file, the whole board.c could be generated by acrn-config
tool for each board.
Please note we only provide DMAR info MACROs for nuc7i7dnb board. For other
boards, ACPI_PARSE_ENABLED must be set to y in Kconfig to let hypervisor parse
DMAR info, or use acrn-config tool to generate DMAR info MACROs if user won't
enable ACPI parse code for FuSa consideration.
The patch also moves the function of get_dmar_info() to vtd.c, so dmar_info.c
could be removed.
Tracked-On: #3977
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The value of CONFIG_MAX_IOMMU and MAX_DRHDS are identical to DRHD_COUNT
which defined in platform ACPI table, so remove CONFIG_MAX_IOMMU_NUM
from Kconfig and link these three MACROs together.
Tracked-On: #3977
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hypcall_id has a type of uint64_t and should use 'llx' as
formatting flag instead of '%d'. Otherwise, we will get a
confusing error log when not-allowed hypercall occurs.
Without this patch:
[96707209us][cpu=1][sev=3][seq=2386]:hypercall -2147483548 is only allowed from SOS_VM!
With this patch:
[84613395us][cpu=1][sev=3][seq=2136]:hypercall 0x80000064 is only allowed from SOS_VM!
So, we can figure out which not-allowed hypercall has been triggered more conveniently.
BTW, this patch adds hypcall_id which triggered from non-ring0 into error log.
Tracked-On: #4012
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Now the default board memory size is 16 GB. However, ACRN support more and more boards
which may have memory size large than 16 GB. This patch try to filter e820 table which
is over top address space.
Tracked-On: #4007
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Now the e820 structure store ACRN HV memory layout, not the physical memory layout.
Rename e820 to hv_hv_e820 to show this explicitly.
Tracked-On: #4007
Signed-off-by: Li Fei1 <fei1.li@intel.com>
AP trampoline code should be accessible
to hypervisor only, this patch is to unmap
this region from service VM's EPT for security
reason.
Tracked-On: #3992
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. Print warning message instead of ASSERT when
the caller try to modify the attribute for
memory region that is not present.
2. To avoid above warning message for memory region
below 1M,its attribute may be updated by Service
VM when updating MTTR setting.
Tracked-On: #3992
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We should use INIT signal to notify the vcpu threads when
powering off the hard RTVM. To achive this, we should set
the vcpu->thread_obj.notify_mode as SCHED_NOTIFY_INIT.
Patch (27163df9 hv: sched: add sleep/wake for thread object)
tries to set the notify_mode according `is_lapic_pt_enabled(vcpu)`
in function prepare_vcpu. But at this point, the is_lapic_pt_enabled(vcpu)
will always return false. Consequently, it will set notify_mode
as SCHED_NOTIFY_IPI. Then leads to the failure of powering off
hard RTVM.
This patch fixes it by:
- Initialize the notify_mode as SCHED_NOTIFY_IPI in prepare_vcpu.
- Set notify_mode as SCHED_NOTIFY_INIT after guest is trying to
enable x2apic mode of passthru lapic.
Tracked-On: #3975
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
After adding PCI BAR remap support, mmio_node may unregister when there's others
access it. This patch add a lock to protect mmio_node access.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Since guest could re-program PCI device MSI-X table BAR, we should add mmio
emulation handler unregister.
However, after add unregister_mmio_emulation_handler API, emul_mmio_regions
is no longer accurate. Just replace it with max_emul_mmio_regions which records
the max index of the emul_mmio_node.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
In theory, guest could re-program PCI BAR address to any address. However, ACRN
hypervisor only support [0, top_address_space) EPT memory mapping. So we need to
check whether the PCI BAR re-program address is within this scope.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN currently uses 2MB large pages in the page tables setup
for trampoline code and data. This patch lets ACRN use 1GB large
pages instead.
When it comes to fixing symbols in trampoline code, fixing pointers
in PDPT is no more needed as PDPT PTEs contain Physical Address.
Tracked-On: #3899
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
kick means to notify one thread_object. If the target thread object is
running, send a IPI to notify it; if the target thread object is
runnable, make reschedule on it.
Also add kick_vcpu API in vcpu layer to notify vcpu.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch decouple some scheduling logic and abstract into a scheduler.
Then we have scheduler, schedule framework. From modulization
perspective, schedule framework provides some APIs for other layers to
use, also interact with scheduler through scheduler interaces.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- The default behaviors of PIO & MMIO handlers are same
for all VMs, no need to expose dedicated APIs to register
default hanlders for SOS and prelaunched VM.
Tracked-On: #3904
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Currently the parameter of init_ept_mem_ops is
'struct acrn_vm *vm' for this api,change it to
'struct memory_ops *mem_ops' and 'vm_id' to avoid
the reversed dependency, page.c is hardware layer and vm structure
is its upper-layer stuff.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Let init thread end with run_idle_thread(), then idle thread take over and
start to do scheduling.
Change enter_guest_mode() to init_guest_mode() as run_idle_thread() is removed
out of it. Also add run_thread() in schedule module to run
thread_object's thread loop directly.
rename: switch_to_idle -> run_idle_thread
Tracked-On: #3813
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
sleep one thread_object means to prevent it from being scheduled.
wake one thread_object is an opposite operation of sleep.
This patch also add notify_mode in thread_object to indicate how to
deliver the request.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
schedule infrastructure is per pcpu, so move its initialization to each
pcpu's initialization.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To support cpu sharing, multiple vcpu can run on same pcpu. We need do
necessary vcpu context switch. This patch add below actions in context
switch.
1) fxsave/fxrstor;
2) save/restore MSRs: MSR_IA32_STAR, MSR_IA32_LSTAR,
MSR_IA32_FMASK, MSR_IA32_KERNEL_GS_BASE;
3) switch vmcs.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With cpu sharing enabled, per_cpu vcpu cannot work properly as we might
has multiple vcpus running on one pcpu.
Add a schedule API sched_get_current to get current thread_object on
specific pcpu, also add a vcpu API get_running_vcpu to get corresponding
vcpu of the thread_object.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With cpu sharing enabled, we will map acrn_vcpu to thread_object
in scheduling. From modulization perspective, we'd better hide the
pcpu_id in acrn_vcpu and move it to thread_object.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vcpu thread's stack shouldn't follow reset_vcpu to reset.
There is also a bug here:
while vcpu B thread set vcpu->running to false, other vcpu A thread
will treat the vcpu B is paused while it has not been switch out
completely, then reset_vcpu will reset the vcpu B thread's stack and
corrupt its running context.
This patch will remove the vcpu thread's stack reset from reset_vcpu.
With the change, we need do init_vmcs between vcpu startup address be
settled and scheduled in. And switch_to_idle() is not needed anymore
as S3 thread's stack will not be reset.
Tracked-On: #3813
Signed-off-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Two time related synthetic MSRs are implemented in this patch. Both of
them are partition wide MSR.
- HV_X64_MSR_TIME_REF_COUNT is read only and it is used to return the
partition's reference counter value in 100ns units.
- HV_X64_MSR_REFERENCE_TSC is used to set/get the reference TSC page,
a sequence number, an offset and a multiplier are defined in this
page by hypervisor and guest OS can use them to calculate the
normalized reference time since partition creation, in 100ns units.
Tracked-On: #3831
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch implements the minimum set of TLFS functionality. It
includes 6 vCPUID leaves and 3 vMSRs.
- 0x40000001 Hypervisor Vendor-Neutral Interface Identification
- 0x40000002 Hypervisor System Identity
- 0x40000003 Hypervisor Feature Identification
- 0x40000004 Implementation Recommendations
- 0x40000005 Hypervisor Implementation Limits
- 0x40000006 Implementation Hardware Features
- HV_X64_MSR_GUEST_OS_ID Reporting the guest OS identity
- HV_X64_MSR_HYPERCALL Establishing the hypercall interface
- HV_X64_MSR_VP_INDEX Retrieve the vCPU ID from hypervisor
Tracked-On: #3832
Signed-off-by: wenwumax <wenwux.ma@intel.com>
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Consider the following case when TPR shadow is used with vlapic
basic mode:
1) 2 interrupts are pending in vlapic. INTa's priority > TPR and
INTb's priority <= TPR.
2) TPR threshold is set to zero and INTa is injected to guest.
3) Guest set TPR to the priority of INTa.
4) EOI of INTa. PPR is updated to TPR which equals INTa's priority.
INTb cannot be injected because its priority <= PPR.
5) Guest set TPR to zero. Because TPR threshold is still zero, there is
no TPR threshold vmexit. But since both TPR and ISRV are zero at
this time, the PPR is zero as well. INTb still cannot be injected.
This is a bug.
By adding vcpu_make_request(vlapic->vcpu, ACRN_REQUEST_EVENT) in EOI,
TPR threshold will be updated before vm_resume.
Tracked-On: #3795
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently we are using a 1:1 mapping logic for pcpu:vcpu. So don't need
a runqueue for it. Removing it as preparation work to abstract scheduler
framework.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
PRMRR related MSRs need to be configured by platform BIOS / bootloader.
These settings are not allowed to be changed by guest.
VMs currently have no requirement to access these MSRs even when vSGX is enabled.
So, this patch disables PRMRR related MSRs in VM.
Tracked-On: #3739
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
--remove unnecessary includes
--remove unnecssary forward-declaration for 'struct vhm_request'
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
When a VM is configured with LAPIC PT mode and its vCPU is in x2APIC
mode, the corresponding pCPU needs to be reset during VM shutdown/reset
as its physical LAPIC was used by its guest.
This commit fixes an issue where this reset never happens.
is_lapic_pt_enabled() needs to be called before reset_vcpu() to be able
to correctly reflect a vCPU's APIC mode.
A vCPU with LAPIC PT mode but in xAPIC mode does not require such reset,
since its physical LAPIC was not touched by its guest directly.
v2 -> v3:
- refine edge case detection logic
v1 -> v2:
- use a separate function to return the bitmap of LAPIC PT enabled pCPUs
Tracked-On: #3708
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Jack Ren <jack.ren@intel.com>
it uses builtin function(__builtin_popcountl)in bitmap_weight(),
it will use the 'popcnt' instruction,
this patch enable 'popcnt' instruction support in Makefile
Tracked-On: #3663
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
- update the function argument type to union
Declaring argument as pointer is not necessary since it
only does the comparison.
Tracked-On: #1842
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
To enable static configuration of different scenarios, we configure VMs
in HV code and prepare all nesserary resources for this VM in create VM
hypercall. It means when we create one VM through hypercall, HV will
read all its configuration and run it automatically.
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As we introduced vcpu_affinity[] to assign vcpus to different pcpus, the
old policy and functions are not needed. Remove them.
Tracked-On: #3663
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add this vcpu_affinity[] for each VM to indicate the assignment policy.
With it, pcpu_bitmap is not needed, so remove it from vm_config.
Instead, vcpu_affinity is a must for each VM.
This patch also add some sanitize check of vcpu_affinity[]. Here are
some rules:
1) only one bit can be set for each vcpu_affinity of vcpu.
2) two vcpus in same VM cannot be set with same vcpu_affinity.
3) vcpu_affinity cannot be set to the pcpu which used by pre-launched VM.
v4: config SDC with CONFIG_MAX_KATA_VM_NUM
v5: config SDC with CONFIG_MAX_PCPU_NUM
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
There is plan that define each VM configuration statically in HV and let
DM just do VM creating and destroying. So DM need get vcpu_num
information when VM creating.
This patch return the vcpu_num via the API param. And also initial the
VMs' cpu_num for existing scenarios.
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MAX_PCPU_NUM is different on various BOARDs. So we move the generic
definition from Kconfig to each board's config header file.
Tracked-On: #3663
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Now, we create vcpus while VM being created in hypervisor. The
create vcpu hypercall will not be used any more. For compatbility,
keep the hypercall HC_CREATE_VCPU do nothing.
v4: Don't remove HC_CREATE_VCPU hypercall, let it do nothing.
Tracked-On: #3663
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
it will panic if phys_cpu_num > CONFIG_MAX_PCPU_NUM
during init_pcpu_pre,after that no need to check it again.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Add " with acrn-config" tag in build info when user build hypervisor with
acrn-config xmls would be helpful to identify the hypervisor configuration
in current build is from acrn-config xml or from source code.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
TSC would be reset to 0 when enter suspend state on some platform.
This will fail the secure timer checking in secure world because
secure world leverage the TSC as source of secure timer which should
be increased monotonously.
This patch save/restore TSC in host suspend/resume path to guarantee
the mono increasing TSC.
Note: There should no timer setup before TSC resumed.
Tracked-On: #3697
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
