Use tp register directly for arch_get_pcpu_id. This can eliminate the
unnecessary mv instruction.
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
send_single_ipi/send_dest_ipi_mask are calling sbi_send_ipi. According
to SBI spec:
- uint64_t hart_mask is a scalar bit-vector containing hartids
- uint64_t hart_mask_base is the starting hartid from which the
bit-vector must be computed
Logical pCPU ID and pCPU ID mask need to be converted to physical hart
ID mask and physical hart ID base.
Tracked-On: #8811
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
MMIO read/write without memory order should be common ARCH, without
PIO support shouldn't use PIO APIs, so implement them as empty.
Tracked-On: #8807
Signed-off-by: Fei Li <fei1.li@intel.com>
Signed-off-by: Haoyu Tang <haoyu.tang@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
init sched and call run_idle_thred in init_pcpu_comm_post to switch to idle
thread after AP initialization finish.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
schedule.c and sched_noop are common module instead of x86 specific, so
move them out of x86 macro, and need set SCHEDULER to be SCHED_NOOP
in scenario file for riscv build.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
some trace API is required by other module, so move trace.c out of x86,
it needs add ACRNTRACE_ENABLE = n in scenario file for riscv, could remove
ACRNTRACE_ENABLE = n when trace in riscv is fully supported.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
implement arch_cpu_dead and arch_cpu_do_idle for riscv, arch_cpu_dead and
arch_cpu_do_idle will be called by common module.
Tracked-On: #8812
Signed-off-by: Haicheng Li <haicheng.li@outlook.com>
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
cpu_dead calls arch_cpu_dead, cpu_do_idle calls arch_cpu_do_idle,
arch_cpu_dead and arch_cpu_do_idle are required to be implemented by
each architecture.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
move run_idle_thread and default_idle to schedule file as common
function.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
stack_frame is not only for vcpu thread, host thread needs
it, so move stack_frame out of vcpu file.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
delivery mode and idle mode are x86 specific percpu, so move it from common to
x86 arch, also change the name of mode_to_idle to be idle_mode, change the name
of mode_to_kick_pcpu to be kick_pcpu_mode.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
add arch_send_reschedule_request, which is called by make_reschedule_request, for X86
arch_send_reschedule_request will call kick_pcpu, arch_send_reschedule_request is arch
public API, which is needed to be implemented by each architecture.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch moves timer.c and softirq.c out from x86 to
make them be built for risc-v too.
Tracked-On: #8816
Signed-off-by: Yi Y Sun <yi.y.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch calls timer_init() to initialize timer for
pcpu on risc-v platform.
Tracked-On: #8816
Signed-off-by: Yi Y Sun <yi.y.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Convert IRQ-related macros to static inline functions and introduce
wrappers for arch-specific implementations. This follows the style we
defined for multi-arch development.
This is a follow-up update for commit
a7239d126 ("[FIXME] hv: risc-v add denpended implementation in cpu.h").
CPU_IRQ_ENABLE_ON_CONFIG -> local_irq_enable
CPU_IRQ_DISABLE_ON_CONFIG -> local_irq_disable
CPU_INT_ALL_DISABLE -> local_irq_save
CPU_INT_ALL_RESTORE -> local_irq_restore
Tracked-On: #8813
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Fix a compilation error that may occur in some environments due to an
inconsistent type cast. The compiler reports a strict-aliasing violation:
acrn-hypervisor/hypervisor/include/arch/riscv/asm/cpu.h:73:18:
error: dereferencing type-punned pointer will break strict-aliasing rules
[-Werror=strict-aliasing]
73 | *(uint32_t *)(x) = val;
| ^~~~~
Tracked-On: #8813
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
local_irq_save() is intended to read and clear the SIE bit in
sstatus (disabling interrupts). The current implementation mistakenly
clears all bits in sstatus.
This patch corrects the inline assembly so that only the SIE bit is affected,
ensuring proper interrupt save/disable semantics on RISC-V.
Fixes: a7239d126 ("[FIXME] hv: risc-v add denpended implementation in cpu.h")
Tracked-On: #8813
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch implements interrupt initialization and the basic
exception/interrupt handling flow on RISC-V.
init_interrupt() needs to be invoked during CPU initialization to
set up the trap vector and enable the interrupt.
RISC-V exception and interrupt handling includes:
- Saving and restoring CPU registers around traps
- Implementing handlers for:
- Supervisor software interrupt
- Supervisor timer interrupt
- Halting the CPU for all other interrupts and exceptions
------
TODOs:
1. add support for registering interrupt handlers via request_irq() and
further adoption of the common IRQ framework.
2. add support for external interrupt.
Tracked-On: #8813
Signed-off-by: Haicheng Li <haicheng.li@intel.com>
Co-developed-by: Shiqing Gao <shiqing.gao@intel.com>
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Enable acrnlog (memory logging) in release builds, default log level
is still controlled by DEBUG_OPTIONS/MEM_LOGLEVEL in scenario file.
Tracked-On: #8805
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
acrntrace and hvlog depends on sbuf, as they are going to be included
in release versions, sbuf also need to be included.
Tracked-On: #8805
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Make acrntrace a common feature in both debug and release builds,
instead of debug-only. A new config option ACRNTRACE_ENABLED is added
in scenario to toggle this feature and it is enabled by default.
TRACE_6C is removed due to it violates "C-FN-20: Each function shall
have at most 6 parameters" coding rule and it is never used.
Tracked-On: #8805
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Without -fpie or -fno-pie specified in the CFLAGS and ASFLAGS, different
versions of riscv64-linux-gnu-gcc have different behavior, for example,
Ubuntu 13.3.0-6ubuntu2~24.04 will compile as if -fpie, but 15.1.0 will
compile as if -fno-pie. To make the build consistent specify -fpie when
CONFIG_RELOC=y and -fno-pie otherwize explicitly.
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch adds the basic logics to bring up all APs in the C
entry of BSP boot. The mapping between logcial CPU IDs and physical
hart IDs is setup based on the pre-generated data from config tool
by parsing the device tree. Logical CPU ID BSP_CPU_ID will always
map to the BSP hart ID. The per pCPU logic ID is saved in tp register.
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Extension Zihintpause (Pause hint) is mandatory for RVA23. asm_pause
is implemented based on "pause" instruction.
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Use tp register to hold the current logical CPU ID. This follows the
same design as x86 which uses MSR_IA32_SYSENTER_CS for the same purpose.
riscv uses SBI HSM to start the APs.
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This is just for temporary build and should be reverted when
common debug module is integrated.
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The following pcpu related interfaces are moved into common:
- common/cpu.c::start_pcpus
- include/common/cpu.h::get_pcpu_id
- include/common/cpu.h::set_current_pcpu_id
Their arch specific implementations are moved into arch/$(ARCH):
- arch/$(ARCH)/cpu.c::arch_start_pcpu
- include/arch/$(ARCH)/asm/cpu.h::arch_get_pcpu_id
- include/arch/$(ARCH)/asm/cpu.h::arch_set_current_pcpu_id
The following interface is moved into common:
- pcpu_set_current_state (from arch/x86/cpu.c -> common/cpu.c)
The following MACROs are moved into include/common/cpu.h:
- CPU_UP_TIMEOUT
- CPU_DOWN_TIMEOUT
- BSP_CPU_ID
- INVALID_CPU_ID
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Extract common interface to include/lib/bits.h, and invoke the variant
implementation of arch.
Re-implement unlocked functions as C in common library.
Rename bitmap*lock() to bitmap*(), bitmap*nolock() to bitmap*non_atomic().
Tracked-On: #8803
Signed-off-by: Haoyu Tang <haoyu.tang@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
extract common barrier interface to include/lib/barrier.h,
and invoke the variant implementation of arch.
Tracked-On: #8803
Signed-off-by: Haoyu Tang <haoyu.tang@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
spinlock invokes CPU_INT_ALL_DISABLE & CPU_INT_ALL_RESTOE, bitops
invokes BITS_PER_LONG, add them to pass the build.
current implementation is macro, same as X86. later official mult-arch
change should refactor to static inline on both x86 and risc-v.
Tracked-On: #8803
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Haoyu Tang <haoyu.tang@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Extract common interface to include/lib/spinlock.h, and invoke the
variant implementation of arch.
Refine assemble macro code in case that ASSEMBLER defined.
Tracked-On: #8803
Signed-off-by: Haoyu Tang <haoyu.tang@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
