IC_ASSIGN_PCIDEV -> ACRN_IOCTL_ASSIGN_PCIDEV
IC_DEASSIGN_PCIDEV -> ACRN_IOCTL_DEASSIGN_PCIDEV
QUIRK_PTDEV -> ACRN_PTDEV_QUIRK_ASSIGN
struct acrn_assign_pcidev -> struct acrn_pcidev
Move struct acrn_pcidev into acrn_common.h because it is used by both
DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
struct hc_platform_info -> struct acrn_platform_info
MAX_PLATFORM_LAPIC_IDS -> ACRN_PLATFORM_LAPIC_IDS_MAX
A layout change to the struct hc_platform_info is that move
max_kata_containers to back of vm_config_size,
uint16_t max_vcpus_per_vm;
uint16_t max_vms;
uint32_t vm_config_size;
uint64_t max_kata_containers;
Then, they are nature 64-bits aligned.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
The current permission-checking and dispatching mechanism of hypercalls is
not unified because:
1. Some hypercalls require the exact vCPU initiating the call, while the
others only need to know the VM.
2. Different hypercalls have different permission requirements: the
trusty-related ones are enabled by a guest flag, while the others
require the initiating VM to be the Service OS.
Without a unified logic it could be hard to scale when more kinds of
hypercalls are added later.
The objectives of this patch are as follows.
1. All hypercalls have the same prototype and are dispatched by a unified
logic.
2. Permissions are checked by a unified logic without consulting the
hypercall ID.
To achieve the first objective, this patch modifies the type of the first
parameter of hcall_* functions (which are the callbacks implementing the
hypercalls) from `struct acrn_vm *` to `struct acrn_vcpu *`. The
doxygen-style documentations are updated accordingly.
To achieve the second objective, this patch adds to `struct hc_dispatch` a
`permission_flags` field which specifies the guest flags that must ALL be
set for a VM to be able to invoke the hypercall. The default value (which
is 0UL) indicates that this hypercall is for SOS only. Currently only the
`permission_flag` of trusty-related hypercalls have the non-zero value
GUEST_FLAG_SECURE_WORLD_ENABLED.
With `permission_flag`, the permission checking logic of hypercalls is
unified as follows.
1. General checks
i. If the VM is neither SOS nor having any guest flag that allows
certain hypercalls, it gets #UD upon executing the `vmcall`
instruction.
ii. If the VM is allowed to execute the `vmcall` instruction, but
attempts to execute it in ring 1, 2 or 3, the VM gets #GP(0).
2. Hypercall-specific checks
i. If the hypercall is for SOS (i.e. `permission_flag` is 0), the
initiating VM must be SOS and the specified target VM cannot be a
pre-launched VM. Otherwise the hypercall returns -EINVAL without
further actions.
ii. If the hypercall requires certain guest flags, the initiating VM
must have all the required flags. Otherwise the hypercall returns
-EINVAL without further actions.
iii. A hypercall with an unknown hypercall ID makes the hypercall
returns -EINVAL without further actions.
The logic above is different from the current implementation in the
following aspects.
1. A pre-launched VM now gets #UD (rather than #GP(0)) when it attempts
to execute `vmcall` in ring 1, 2 or 3.
2. A pre-launched VM now gets #UD (rather than the return value -EPERM)
when it attempts to execute a trusty hypercall in ring 0.
3. The SOS now gets the return value -EINVAL (rather than -EPERM) when it
attempts to invoke a trusty hypercall.
4. A post-launched VM with trusty support now gets the return value
-EINVAL (rather than #UD) when it attempts to invoke a non-trusty
hypercall or an invalid hypercall.
v1 -> v2:
- Update documentation that describe hypercall behavior.
- Fix Doxygen warnings
Tracked-On: #5924
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add HC_CREATE_VDEV and HC_DESTROY_VDEV two hypercalls that are used to
create and destroy an emulated device(PCI device or legacy device) in hypervisor
v3: 1) change HC_CREATE_DEVICE and HC_DESTROY_DEVICE to HC_CREATE_VDEV
and HC_DESTROY_VDEV
2) refine code style
v4: 1) remove unnecessary parameter
2) add VM state check for HC_CREATE_VDEV and HC_DESTROY hypercalls
Tracked-On: #4853
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- use an array to fast locate the hypercall handler
to replace switch case.
-- uniform hypercall handler as below:
int32_t (*handler)(sos_vm, target_vm, param1, param2)
Tracked-On: #4958
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Add two hypercalls to support MMIO device pass through for post-launched VM.
And when we support MMIO pass through for pre-launched VM, we could re-use
the code in mmio_dev.c
Tracked-On: #5053
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Now we split passthrough PCI device from DM to HV, we could remove all the passthrough
PCI device unused code.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add assign/deassign PCI device hypercall APIs to assign a PCI device from SOS to
post-launched VM or deassign a PCI device from post-launched VM to SOS. This patch
is prepared for spliting passthrough PCI device from DM to HV.
The old assign/deassign ptdev APIs will be discarded.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
'param' is BDF value instead of GPA when VHM driver
issues below 2 hypercalls:
- HC_ASSIGN_PTEDEV
- HC_DEASSIGN_PTDEV
This patch is to remove related code in hc_assign/deassign()
functions.
Tracked-On: #4334
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
--remove unnecessary includes
--remove unnecssary forward-declaration for 'struct vhm_request'
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Now, we create vcpus while VM being created in hypervisor. The
create vcpu hypercall will not be used any more. For compatbility,
keep the hypercall HC_CREATE_VCPU do nothing.
v4: Don't remove HC_CREATE_VCPU hypercall, let it do nothing.
Tracked-On: #3663
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
add new hypercall get platform information,
such as physical CPU number.
Tracked-On: #2538
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Under sharing mode, VM0 is identical with SOS VM. But the coupling of
SOS VM and VM 0 is not friendly for partition mode.
This patch is a pure term change of vm0 to sos VM, it does not change
any code logic or senmantic.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove the usage of HV_DEBUG in hypercall.c and vmcall.c
TO-DO:
Enhance Makefile to compile debug/release into 2 libraries
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
fix the following integer violations:
1. Signed/unsigned conversion without cast
2. Literal value requires a U suffix
3. Implicit conversion of underlying type
v3 -> v4:
* change the type of npk_loglevel/mem_loglevel/console_loglevel
from uint32_t to uint16_t
v2 -> v3:
* discard the return value of update_ept
* discard changes related to npk loglevel
v1 -> v2:
* remove the unnecessary changes related to the false positive
issues caused by scanning tool
* change the type of the local variable 'vlapic_id' from uint8_t
to uint32_t in function 'vlapic_build_id'
* change the type of the struct member 'flags' in shared_buf from
uint64_t to uint32_t
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The the bdf(bus/dev/func) is used to determine which pass-through device should
be assigned/released. Now the hypervisor parses the corresponding bdf from the guest
physical address when hcall_assign_ptdev/hcall_deassign_ptdev is called.
As it is only uint16_t, it is unnecessary to use the GPA to pass the bdf parameter.
Instead the parameter can be used as the bdf directly.
In order to keep the compatibility, it still can get the bdf by using
copy_from_gpa when SOS passes the parameter based on the buffer. But this will
be depreciated.
This is based on the assumption that the GPA in SOS is greater than 0x10000
when one buffer is allocated to pass the corresponding hypercall parameter.
After the SOS uses the bdf to pass the hypercall paremeter, we can remove the code
that gets the bdf by using copy_from_gpa.
V1->V2: Add some comments for hcall_assign_ptdev/hcall_deassign_ptdev.
Tracked-on: #1751
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The old doc update commit changed the code by accident and broke
release version build. This patch fix the release build issue.
Tracked-On: #1595
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For data structure types "struct vm", its name is identical
with variable name in the same scope. This is a MISRA C violation.
Naming convention rule:If the data structure type is used by multi
modules, its corresponding logic resource is exposed to external
components (such as SOS, UOS), and its name meaning is simplistic
(such as vcpu, vm), its name needs prefix "acrn_".
The following udpates are made:
struct vm *vm-->struct acrn_vm *vm
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
For data structure types "struct vcpu", its name is identical
with variable name in the same scope. This is a MISRA C violation.
Naming convention rule:If the data structure type is used by multi
modules, its corresponding logic resource is exposed to external
components (such as SOS, UOS), and its name meaning is simplistic
(such as vcpu, vm), its name needs prefix "acrn_".
The following udpates are made:
struct vcpu *vcpu-->struct acrn_vcpu *vcpu
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
After enabling vPCI in hypervisor for vm0, UOS may not able be launched
successfully. Consider this scenario (take MSI-X for example):
- DM makes hypercall to hypervisor to do MSI-X remapping on behalf of
UOS guests.
- After the hypercall, VHM module in SOS kernel updates the physical
MSI-X table with the physical Message Data/Addr.
- These MMIO write requests are intercepted by hypervisor, which will
call ptdev_msix_remap() to do MSI-S remapping.
It may fail due to 2 possible reasons:
1) wrong target VM because:
hypervisor thinks it's a VM0 MSI-X device but they have been registered
as UOS guests through HC_SET_PTDEV_INTR_INFO hypercall.
2) wrong ptdev_msi_info->vmsi_data because:
The virtual MSI-X table is supposed to hold virtual Message data/addr
but the SOS VHM writes the physical ones to it.
This patch resolves these problems by ignoring the HC_VM_PCI_MSIX_REMAP
hypercall, so virtual and physical Message Data are the same from SOS'
perspective and it won't mess up the virtual PCI device in HV.
Also in HC_SET_PTDEV_INTR_INFO handler, vpci updates the target VM
when the PCI devices are assigned to different VMs.
The UOS' MSI/MSI-X remapping is triggered by hypervisor when SOS (either
DM or VHM) updates the Message Data/Addr.
Tracked-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Below functions are deprecated, remove them from hypercall.h
hc_assert_irqline()/hc_deassert_irqline()/hc_pulse_irqline()
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds support to sep/socwatch profiling
Adds 2 new files include/arch/x86/profiling.h and arch/x86/profiling.c
which contains most of the implementation for profiling,most of the functions
in profiling.c have dummy implementation and will be implemented in next patches
a. cpu.c, Initial profiling setup is done as part of bsp_boot_post
and cpu_secondary_post flow
b. vmcall.c, New ioctl is added for performing profiling related
operations in vmcall_vmexit_handler
ioctl - HC_PROFILING_OPS
function - hcall_profiling_ops()
c. common/hypercall.c, hcall_profiling_ops() implementation.
d. hv_main.c, In vcpu_thread calling profiling related functions
to save vm context
e. acrn_hv_defs.h, list all the profiling command types
Tracked-On: projectacrn#1409
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Chinthapally, Manisha <manisha.chinthapally@intel.com>
Fix violations for function whose parameter can be read-only.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Pointer param should be declared pointer to const if
the parameter is keeped read-only.
This patch changes pointer param whose name is vm.
Tracked-On:#861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
DM will use this hypercall to initialize the UOS BSP state.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Doxygen API comment added to hypercall.h was incorrect causing the doc
build process to fail with a warning (parameter not documented).
Fixes: #1353
Tracked-On: #1353
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fix a Doxygen comment in the hypercall.h header file which is
missing the name of the parameter, this is causing warnings when
generating the documentation related to the
hcall_set_callback_vector() hypercall.
Tracked-On: #1335
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Currently the acrn-hypervisor is using the PLATFORM_IPI vector to notify
the sos_kernel. And then sos_kernel will handle the notification from acrn
hypervisor in PLATFORM_IPI ISR. But as the PLATFORM_IPI ISR can be registered
by the other modules, it will have the conflict when trying to register
acrn intr ISR. So the HYPERVISOR_CALLBACK_VECTOR will be used instead.
In order to switch the notification vector from PLATFORM_IPI to
HYPERVISOR_CALLBACK_VECTOR, one API is added so that sos can configure
the up-notifier interrrupt vector.
Tracked-On: https://github.com/projectacrn/acrn-hypervisor/issues/1325
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The hypercall can be used by SOS/DM to monitor UOS
pass-thru devices' interrupt data; and if an "interrupt
storm" happens in UOS, it can be used to delay the UOS
PTdev interrupt's injection for sometime.
The two functions are implemented by one hypercall with
two sub-commands, and with the data/params in the buffer.
Tracked-On: #866
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In the current hypervisor hypercall, first all vcpu is
allocated to SOS, vcpu's vm field is initialized to vm0.
When the vcpu is offlined, vcpu will be paused and vcpu's
vm field is set as NULL by DM. When UOS is created, vcpu's
vm field is set as UOS's vm. So when vmcall_vmexit_handler
is invoked, vcpu's vm filed is always non-NULL.
error checking for vm pointer is done in the function
"vmcall_vmexit_handler", vmcall_vmexit_handler will
guarantee that vm is vm0.
So all hypercall functions (these functions is just for handler
hypercall, except vmcall_vmexit_handler) don't need to check
whether invoking vm is NULL and don't need to check whether
invoking vm is vm0 or not.
Remove related invoking vm error checking for hypercall handling.
V1 --> V2:
Add pre-condition for hypercall in the head file.
V2 --> V3:
Add pre-condition for copy_from_gpa and copy_to_gpa.
V3 --> V4:
Add pre-condition both in the head file and source file.
Tracked-On:#1258
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The hypercall HC_SETUP_HV_NPK_LOG is added to enable/disable/configure
the hypervisor NPK log.
Signed-off-by: Zhi Jin <zhi.jin@intel.com>
Signed-off-by: Zhonghua Sun <zhonghua.sun@intel.com>
Reviewed-by: CHEN Gang <gang.c.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
New field in VM's structure:
sworld_snapshot: save cpu_context of secure world.
New hypercall: HC_SAVE_RESTORE_SWORLD_CTX
In UOS S3 suspend path: trusty kernel driver will call this hypercall
to require Hypervisor save context of secure world.
In UOS S3 resume path: virtual firmware will call this hypercall to
require Hypervisor restore context of secure world.
New bit in secure_world_control.flag:
ctx_saved: indicate whether cpu_context of secure world is saved.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix the parameter name mismatch between API declaration and definition.
v2 -> v3:
* Fix two more violations which are missed in previous report.
shell_puts and console_write
v1 -> v2:
* Replace 'ret_desc' with 'desc'
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
And export the API to DM. DM will do system reboot/S3 resume based
on this API.
Also add the pre-assumption description for some vm APIs.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently we don't support resume VM in HC API, the real meaning
of the code is to start VM.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently no post-work is done for I/O requests of type PCICFG or WP. The
impacts include:
1. ''valid'' in VHM request buffers are left as 1 even after the I/O request
completes. This violates the pre-condition of acrn_insert_request_wait()
but does not cause failures since a new I/O request can never happen
before the previous one completes.
2. Values read from PCI configuration spaces are never passed to UOS.
This patch adds the post-work for these two kinds of I/O requests. The post-work
for port I/O is invoked for PCICFG since it is essentially a port I/O and the
request structure is compatible. No post-work is needed for WP as it is only
triggered for EPT violations on writes, while post-work is mainly for reads.
v2 -> v3:
* Consistently use 0/1 (not false/true) for the ''valid'' member.
* Add comments to suggest when the hypervisor can see REQ_PCICFG and why
dm_emulate_pio_post also works in such cases.
* Rename: mark_ioreq_done -> complete_ioreq
* Rename: complete_request -> emulate_io_post
* Rename: hcall_notify_req_finish -> hcall_notify_ioreq_finish
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Add hcall_change_vm_page_wp_perm to change guest one page write permission.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
SOS boot with all physicall cpus, before running UOS, it should free
CPU resource by offline not used cpus
- first do standard cpu offline flow
- then call hcall_sos_offline_cpu hypercall to release cpu resource really
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. rename set_vm_memmap to set_vm_memory_region
2. split ept_mmap into ept_mr_add and ept_mr_del
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This is the final cleanup of the integral type related issues, reported by the
static checker, under common/, mostly including
* make explicit the narrowings of vm_ids passed by register.
* work around the confusion of the static checker by abstracting
sub-expressions to local variables.
The remaining reports that are not trivial to suppress will be in the scope of a
separate document.
v1 -> v2:
* Instead of converting vm_ids inside hcall_xxx, update the prototypes of
these functions and do the conversion in vmcall_vmexit_handler.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The error code in the hypervisor is 32-bit signed integers. To reduce implicit
conversions, this patch make hcall_xxx returns int32_t, and finally converts it
to uint64_t when assigned to rax whose semantics is properly defined in C99.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- Remove those APIs without definition
- Minor changes to make sure the line length is less than 80
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
A couple of diagram were written using text characters. This
commit changes that to use pictures instead.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
