This patch extracts information on CPU topology and capability and put them
under the `/acrn-config/processors` node in the board XML.
The added information can be divided into two categories.
1. The topology of CPUs like the following. Each thread (which is a leaf
node in the topology) contains its addresses (i.e. CPU ID, APIC ID,
x2APIC ID) and model identifiers (i.e. family, model, stepping IDs, core
types and native model ID).
<die id="0">
<core id="0x0">
<thread id="0x0">
<cpu_id>0</cpu_id>
<apic_id>0x0</apic_id>
<x2apic_id>0x0</x2apic_id>
<family_id>0x6</family_id>
<model_id>0x9e</model_id>
<stepping_id>0x9</stepping_id>
<core_type></core_type>
<native_model_id></native_model_id>
</thread>
<thread id="0x1"> ... </thread>
</core>
<core id="0x1">
<thread id="0x2"> ... </thread>
<thread id="0x3"> ... </thread>
</core>
<core id="0x2">
<thread id="0x4"> ... </thread>
<thread id="0x5"> ... </thread>
</core>
<core id="0x3">
<thread id="0x6"> ... </thread>
<thread id="0x7"> ... </thread>
</core>
</die>
2. The CPU models identified by the quadruple (family_id, model_id,
core_type, native_model_id). Each model is described by its brandstring
and capabilities, both of which are fetched from CPUID leaves.
<model description="Intel(R) Core(TM) i7-7700 CPU @ 3.60GHz">
<family_id>0x6</family_id>
<model_id>0x9e</model_id>
<core_type></core_type>
<native_model_id></native_model_id>
<capability id="sse3"/>
<capability id="pclmulqdq"/>
<capability id="dtes64"/>
<capability id="monitor"/>
...
</model>
Tracked-On: #5922
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
This patch makes the `run.py` enumerate and invoke all extractors (whose
name should be `##-<name>.py` where `##` is a decimal number for ordering)
under the extractors/ directory. Only some helper subroutines are added in
this patch; the actual extractors will be added in the subsequent patches
in this series.
v1 -> v2:
- Allow an extractor to be classified as advanced by defining the variable
`advanced` to True. Advanced extractors are not enabled by default and
can be invoked by passing `--advanced` to the board inspector.
Tracked-On: #5922
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
This patch adds a parser of SMBIOS tables. The tables are fetched from
/sys/firmware/dmi/tables on target board. The parser comes from
BITS (https://biosbits.org/) without modifications, except how the raw
SMBIOS tables are read.
Tracked-On: #5922
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
This patch adds a parser of PCI-compatible configuration space read from
sysfs. The headers and capability lists are fully parsed, but only a couple
of capabilities are parsed completely. Parsing of additional capabilities
will be added on an on-demand basis.
v1 -> v2:
- Fix a typo that causes incorrect parsing of BAR types
- Parse capability structures using from_buffer_copy instead of
from_address
Tracked-On: #5922
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
This patch adds a parser and interpreter of ACPI DSDT/SSDT tables in
AML (ACPI Machine Language) in order to understand the complete device
layout and resource allocation.
Kindly note that the interpreter is still experimental and not yet
complete.
Tracked-On: #5922
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
This patch adds a parser of the physical E820 memory maps fetched from
/sys/firmware/memmap.
Tracked-On: #5922
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
This patch adds a parser of CPU identification information reported by the
CPUID instruction.
The framework is based on the CPUID parsing facilities in
BITS (https://biosbits.org/), but with the following changes.
1. The CPUID data is fetched by executing the `cpuid` utility, rather than
executing the `cpuid` instruction. This avoids introducing any
additional library or Python/C extension and gets a CPUID leaf on all
physical cores in one shot.
2. Parsers of CPUID leaves 0x10, 0x1A and 0x1F are added. New fields in
existing leaves are also added.
3. A wrapper function, named `parse_cpuid`, is added as the single API that
allows other modules to get an arbitrary CPUID leaf or subleaf.
Tracked-On: #5922
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Starting from Python 3.0 the following changes to the language are
effective:
1. The integer types `int` and `long` have been unified as `int`. See
`https://www.python.org/dev/peps/pep-0237/` for details.
2. The `.iterkeys` method is removed from the `dict` class. See
`https://www.python.org/dev/peps/pep-3106/` for details.
This patch updates `unpack.py`, originally from BITS, so that it can be
used in Python 3.
Tracked-On: #5922
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
This patch reorganize the files of the board inspector as follows.
1. Rename the directory name from `target` to `board_inspector`, in order to
align with the name used in ACRN documentation.
2. Move the scripts that generate the current board XML into the `legacy`
sub-directory. The legacy nodes will be removed after transitioning to the
new board XML schema completely,
3. Add the main script `cli.py` which is the command line interface of the board
inspector.
v1 -> v2:
- Rename `run.py` to `cli.py`.
Tracked-On: #5922
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
The ivshmem region name format is not ristricted to start with "hv".
Loosen the schema validation so that the region name can start with "hv" or "dm".
Tracked-On: #6009
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
- SOS does not allow LAPIC passthru unless nested virtualization is
enabled on SOS.
- Currently nested virtualization requires LAPIC passthru, so if
GUEST_FLAG_VMX_ENABLED is set, GUEST_FLAG_LAPIC_PASSTHROUGH must be
set in same VM.
- Per VM GUEST_FLAG_VMX_ENABLED can be set only if CONFIG_VMX_ENABLED
is set.
Tracked-On: #5923
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
NVMX_ENABLED: ACRN is built to support nested virtualization if set.
GUEST_FLAG_NVMX_ENABLED: indicates that the VMX capability can be present
in this guest to run nested VMs.
Tracked-On: #5923
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The xml schema validator would fail the build if RDT_ENABLED is set to ‘y’
in scenario file, saying that "'RDT' Unexpected child with tag 'MBA_DELAY'"
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
The macro definition SOS_VM_BOOTARGS in vm_configurations.h calls
macros SOS_ROOTFS, SOS_CONSOLE and SOS_BOOTARGS_DIFF which is defined in
misc_cfg.h and parsed from scenario.xmls.
Add a whitespace in the end of the argument macros to prevent arguments
are concatenated in a single line.
Tracked-On: #5998
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
ehl-crb-b
enable CDP_ENABLED for RT in scenarios, enable ivshmem for industry
scenario, disable vuart0 in launch settings, passthru SATA for RTVM,
set virtio-net and virtio-blk for post-launched WaaG and YaaGs.
Tracked-On: #5955
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Instead of "#include <x86/foo.h>", use "#include <asm/foo.h>".
In other words, we are adopting the same practice in Linux kernel.
Tracked-On: #5920
Signed-off-by: Liang Yi <yi.liang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Add comma to the last member of ivshmem pci devices.
If the last element ends without comma, the clang-format would attach
the brackets to the first and last lines.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add a xslt file "misc_cfg.h.xsl". This file is used to
generate misc_cfg.h which is used by hypervisor.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add a xslt file "ivshemem_cfg.h.xsl". This file is used to
generate ivshemem_cfg.h which is used by hypervisor.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add a xslt file "pt_intx.c.xsl". This file is used to
generate pt_intx.c which is used by hypervisor.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add a xslt file "vm_configurations.h.xsl". This file is used to
generate vm_configurations.h which is used by hypervisor.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add a xslt file "vm_configurations.c.xsl". This file is used to
generate vm_configurations.c which is used by hypervisor.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
This file allocates the resource of pio base.
The available pio base is in ['0x3F8', '0x2F8', '0x3E8', '0x2E8'] and it
cannot be used by native device.
When any of sos legacy vuarts are enabled, assign a pio base to legancy
vuarts' base.
The allocator follows rules:
1. An SOS legacy vuart only support PIO vuart.
2. To assign a pio base for sos legacy vuart 0:
- If the hv/DEBUG_OPTIONS/SERIAL_CONSOLE is one of
[ttys0, ttys1, ttys2, ttys3] and it's a pio vuart in the native
environment, the pio base of SOS legacy vuart 0 would be the same as
native one.
- If the hv/DEBUG_OPTIONS/SERIAL_CONSOLE is not one of
[ttys0, ttys1, ttys2, ttys3], assigns a pio base to SOS legacy vuart 0
from avilable pio base.
- If the hv/DEBUG_OPTIONS/SERIAL_CONSOLE is not one of
[ttys0, ttys1, ttys2, ttys3] but a pio vuart, will assigns a pio
base to SOS legacy vuart 0 from avilable pio base and raise a
warning to user.
3. To assign a pio base for sos legacy vuart 1:
- Assigns a pio base to SOS legacy vuart 1 from avilable pio base.
- If all the available pio bases list is empty (which means all are
in used by native), it assigns one of the pio base to SOS legacy
vuart 1 anyway, but raise a warning to user.
4. Assigned pio bases must be unique.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Create an intx.py which is a static allocator to allocate the irq
resources. The available irq list is based on the native irqs which
are in range [0, 15] and are not used by native os.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
If a cpu_affinity node of SOS is not present in the scenario.xml,
assign the native cpus which are not assigned to pre-launched vm to
SOS vm.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Refine the "append_node" which can add new node with an attribute and
return the appended node.
The method "get_node" finds the xpath value and return it if there is an
unique node exists, otherwise it returns None.
It is used to get an xpath element node or can determine the xpath existence.
The "get_text" is replaced with "get_node". The only get_text in
hv_ram.py is modified accordingly.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add lib.xsl under config_tools/xforms.
This lib.xsl contains the variables and customized functions for
xslt transformation.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Create lib.py which contains the common methods that are shared by static
allocators under misc/config_tools/static_allocators.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Create a file which contains user-defined errors for config-tools.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
<guest_flag/> may be treated as either empty string or null in xslt
transformation and xsd schema validation. Replace it with:
<guest_flag></guest_flag>
to avoid the undefined behavior.
The duplicate guest_flag are removed.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
add 2 * max (IVSHMEM_SHM_SIZE, 2M) in HV_RAM_SIZE calculation to
avoid ram overflow caused by additional memory usage for shared
memory alignment.
Tracked-On: #5955
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
fail to create kata vm type in industry scenario due to
the default vm id value is 1. Meanwhile set the max user
vm to 7 in tgl-rvp industry xml.
Tracked-On: #5932
Signed-off-by: lirui34 <ruix.li@intel.com>
There is no audio device in the default ehl-crb-b.xml, so remove
passthru audio devices from launch xmls on ehl-crb-b.
Tracked-On: #5925
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
remove UOS_RAM_SIZE and SOS_RAM_SIZE in scenario config since these
two config elements are useless.
Tracked-On: #5927
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
update HV_RAM_SIZE calculation algorithm to 20MB + VM number*
16MB, which consists of text segment rodata(2MB), bss data(about
1MB), bss.ppt_pages(2.4MB), bss.ctx_tables(6MB), bss.vm_array(
3.2MB), bss.ivshmem_base(2MB+1.8MB for alignment) and
bss.post_uos_sworld_memory(16MB*post-launched VM number).
Tracked-On: #5927
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Refine the logic of finding unused bdf for SOS ivshmem devices. First,
find the unused bdf based on if the "dev" is unused. Increase the "func"
for the next same type of emulated devices if the last assigned bdf
exists. Otherwise, start over looking for unused bdf based on "dev"
repeatedly.
Tracked-On: #5869
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
A scenario can enable multiple IVSHMEM_REGIONs, loosen the restriction
to extend multiple regions support.
Tracked-On: #5863
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Requires explicit arch path name in the include directive.
The config scripts was also updated to reflect this change.
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
"is_tpm_passthru" would always return "False" with the existing logic.
1. Replace "get_leaf_tag_map_bool" with "get_leaf_tag_map". Instead returning a dictrionary with boolean diction values, just get the string value.
2. Return "True" if any vm has enabled the passtrhough tpm with option "y".
Tracked-On: #5710
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
"PTDEV_HI_MMIO_START" is removed by the commit
8d9f12f3b7.
Replace "PTDEV_HI_MMIO_START" with "HI_MMIO_START".
Tracked-On: #5693
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Add the capability to disable or enable #AC for Split-locked Access
through <scenario>.xmls. This was implemented through Kconfig. Move this
configuration from Kconfig to xmls.
Tracked-On: #5798
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
