Rename SOS_VM type to SERVICE_VM
rename UOS to User VM in XML description
rename uos_thread_pid to user_vm_thread_pid
rename devname_uos to devname_user_vm
rename uosid to user_vmid
rename UOS_ACK to USER_VM_ACK
rename SOS_VM_CONFIG_CPU_AFFINITY to SERVICE_VM_CONFIG_CPU_AFFINITY
rename SOS_COM to SERVICE_VM_COM
rename SOS_UART1_VALID_NUM" to SERVICE_VM_UART1_VALID_NUM
rename SOS_BOOTARGS_DIFF to SERVICE_VM_BOOTARGS_DIFF
rename uos to user_vm in launch script and xml
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Rename SOS_VM_NUM to SERVICE_VM_NUM.
rename SOS_SOCKET_PORT to SERVICE_VM_SOCKET_PORT.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename PCI_DEV_TYPE_SOSEMUL to PCI_DEV_TYPE_SERVICE_VM_EMUL.
rename SHUTDOWN_REQ_FROM_SOS to SHUTDOWN_REQ_FROM_SERVICE_VM.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename SHUTDOWN_REQ_FROM_UOS to SHUTDOWN_REQ_FROM_USER_VM.
rename UOS_SOCKET_PORT to USER_VM_SOCKET_PORT.
rename SOS_CONSOLE to SERVICE_VM_OS_CONSOLE.
rename SOS_LCS_SOCK to SERVICE_VM_LCS_SOCK.
rename SOS_VM_BOOTARGS to SERVICE_VM_OS_BOOTARGS.
rename SOS_ROOTFS to SERVICE_VM_ROOTFS.
rename SOS_IDLE to SERVICE_VM_IDLE.
rename SEVERITY_SOS to SEVERITY_SERVICE_VM.
rename SOS_VM_UUID to SERVICE_VM_UUID.
rename SOS_REQ to SERVICE_VM_REQ.
rename RTCT_NATIVE_FILE_PATH_IN_SOS to RTCT_NATIVE_FILE_PATH_IN_SERVICE_VM.
rename CBC_REQ_T_UOS_ACTIVE to CBC_REQ_T_USER_VM_ACTIVE.
rename CBC_REQ_T_UOS_INACTIVE to CBC_REQ_T_USER_VM_INACTIV.
rename uos_active to user_vm_active.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Rename gpa_uos to gpa_user_vm
rename base_gpa_in_uos to base_gpa_in_user_vm
rename UOS_VIRT_PCI_MMCFG_BASE to USER_VM_VIRT_PCI_MMCFG_BASE
rename UOS_VIRT_PCI_MMCFG_START_BUS to USER_VM_VIRT_PCI_MMCFG_START_BUS
rename UOS_VIRT_PCI_MMCFG_END_BUS to USER_VM_VIRT_PCI_MMCFG_END_BUS
rename UOS_VIRT_PCI_MEMBASE32 to USER_VM_VIRT_PCI_MEMBASE32
rename UOS_VIRT_PCI_MEMLIMIT32 to USER_VM_VIRT_PCI_MEMLIMIT32
rename UOS_VIRT_PCI_MEMBASE64 to USER_VM_VIRT_PCI_MEMBASE64
rename UOS_VIRT_PCI_MEMLIMIT64 to USER_VM_VIRT_PCI_MEMLIMIT64
rename UOS in comments message to User VM.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Rename sos_vm to service_vm.
rename sos_vmid to service_vmid.
rename sos_vm_ptr to service_vm_ptr.
rename get_sos_vm to get_service_vm.
rename sos_vm_gpa to service_vm_gpa.
rename sos_vm_e820 to service_vm_e820.
rename sos_efi_info to service_vm_efi_info.
rename sos_vm_config to service_vm_config.
rename sos_vm_hpa2gpa to service_vm_hpa2gpa.
rename vdev_in_sos to vdev_in_service_vm.
rename create_sos_vm_e820 to create_service_vm_e820.
rename sos_high64_max_ram to service_vm_high64_max_ram.
rename prepare_sos_vm_memmap to prepare_service_vm_memmap.
rename post_uos_sworld_memory to post_user_vm_sworld_memory
rename hcall_sos_offline_cpu to hcall_service_vm_offline_cpu.
rename filter_mem_from_sos_e820 to filter_mem_from_service_vm_e820.
rename create_sos_vm_efi_mmap_desc to create_service_vm_efi_mmap_desc.
rename HC_SOS_OFFLINE_CPU to HC_SERVICE_VM_OFFLINE_CPU.
rename SOS to Service VM in comments message.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Implement the propagate_vcbm() function:
Set vCBM to to all the vCPUs that share cache with vcpu
to mimic hardware CAT behavior
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Implement the write_vcbm() function to handle the
MSR_IA32_type_MASK_n vCBM MSRs write request
Call write_vclosid() to handle MSR_IA32_PQR_ASSOC MSR write request
Several vCAT P2V (physical to virtual) and V2P (virtual to physical)
mappings exist:
struct acrn_vm_config *vm_config = get_vm_config(vm_id)
max_pcbm = vm_config->max_type_pcbm (type: l2 or l3)
mask_shift = ffs64(max_pcbm)
vclosid = vmsr - MSR_IA32_type_MASK_0
pclosid = vm_config->pclosids[vclosid]
pmsr = MSR_IA32_type_MASK_0 + pclosid
pcbm = vcbm << mask_shift
vcbm = pcbm >> mask_shift
Where
MSR_IA32_type_MASK_n: L2 or L3 mask msr address for CLOSIDn, from
0C90H through 0D8FH (inclusive).
max_pcbm: a bitmask that selects all the physical cache ways assigned to the VM
vclosid: virtual CLOSID, always starts from 0
pclosid: corresponding physical CLOSID for a given vclosid
vmsr: virtual msr address, passed to vCAT handlers by the
caller functions rdmsr_vmexit_handler()/wrmsr_vmexit_handler()
pmsr: physical msr address
vcbm: virtual CBM, passed to vCAT handlers by the
caller functions rdmsr_vmexit_handler()/wrmsr_vmexit_handler()
pcbm: physical CBM
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Implement the read_vcbm() and read_vclosid() functions to handle the MSR_IA32_PQR_ASSOC
and MSR_IA32_type_MASK_n vCAT MSRs read request.
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Expose CAT feature to vCAT VM by reporting the number of
cache ways/CLOSIDs via the 04H/10H cpuid instructions, so that the
VM can take advantage of CAT to prioritize and partition cache
resource for its own tasks.
Add the vcat_pcbm_to_vcbm() function to map pcbm to vcbm
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Initialize vCBM MSRs
Initialize vCLOSID MSR
Add some vCAT functions:
Retrieve max_vcbm and max_pcbm
Check if vCAT is configured or not for the VM
Map vclosid to pclosid
write_vclosid: vCLOSID MSR write handler
write_vcbm: vCBM MSR write handler
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Specifying a reserved or unimplemented MSR address in ECX for rdmsr will cause a
general protection exception. In this case, we should not change the contents of
registers EDX:EAX.
Tracked-On: #4550
Signed-off-by: Fei Li <fei1.li@intel.com>
Initialize the emulated_guest_msrs[] array at runtime for
MSR_IA32_type_MASK_n and MSR_IA32_PQR_ASSOC msrs, there is no good
way to do this initialization statically at build time
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For vCAT, it may need to store more than MAX_VCPUS_PER_VM of closids,
change clos in vm_config.h to a pointer to accommodate this situation
Rename clos to pclosids
pclosids now is a pointer to an array of physical CLOSIDs that is defined
in vm_configurations.c by vmconfig. The number of elements in the array
must be equal to the value given by num_pclosids
Add max_type_pcbm (type: l2 or l3) to struct acrn_vm_config, which stores a bitmask
that selects/covers all the physical cache ways assigned to the VM
Change vmsr.c to accommodate this amended data structure
Change the config-tools to generate vm_configurations.c, and fill in the num_closids
and clos pointers based on the information from the scenario file.
Now vm_configurations.c.xsl generates all the clos related code so remove the same
code from misc_cfg.h.xsl.
Examples:
Scenario file:
<RDT>
<RDT_ENABLED>y</RDT_ENABLED>
<CDP_ENABLED>n</CDP_ENABLED>
<VCAT_ENABLED>y</VCAT_ENABLED>
<CLOS_MASK>0x7ff</CLOS_MASK>
<CLOS_MASK>0x7ff</CLOS_MASK>
<CLOS_MASK>0x7ff</CLOS_MASK>
<CLOS_MASK>0xff800</CLOS_MASK>
<CLOS_MASK>0xff800</CLOS_MASK>
<CLOS_MASK>0xff800</CLOS_MASK>
<CLOS_MASK>0xff800</CLOS_MASK>
<CLOS_MASK>0xff800</CLOS_MASK>
/RDT>
<vm id="0">
<guest_flags>
<guest_flag>GUEST_FLAG_VCAT_ENABLED</guest_flag>
</guest_flags>
<clos>
<vcpu_clos>3</vcpu_clos>
<vcpu_clos>4</vcpu_clos>
<vcpu_clos>5</vcpu_clos>
<vcpu_clos>6</vcpu_clos>
<vcpu_clos>7</vcpu_clos>
</clos>
</vm>
<vm id="1">
<clos>
<vcpu_clos>1</vcpu_clos>
<vcpu_clos>2</vcpu_clos>
</clos>
</vm>
vm_configurations.c (generated by config-tools) with the above vCAT config:
static uint16_t vm0_vcpu_clos[5U] = {3U, 4U, 5U, 6U, 7U};
static uint16_t vm1_vcpu_clos[2U] = {1U, 2U};
struct acrn_vm_config vm_configs[CONFIG_MAX_VM_NUM] = {
{
.guest_flags = (GUEST_FLAG_VCAT_ENABLED),
.pclosids = vm0_vcpu_clos,
.num_pclosids = 5U,
.max_l3_pcbm = 0xff800U,
},
{
.pclosids = vm1_vcpu_clos,
.num_pclosids = 2U,
},
};
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IOMMU hardware resource is owned by hypervisor, while
IOMMU capability is reported to service VM in its ACPI
table. In this case, Service VM may access IOMMU hardware
resource, which is not expected.
This patch unmaps all Intel IOMMU register pages for service VM EPT.
Tracked-On: #6677
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It's difficult to configure CONFIG_HV_RAM_SIZE properly at once. This patch
not only remove CONFIG_HV_RAM_SIZE, but also we use ld linker script to
dynamically get the size of HV RAM size.
Tracked-On: #6663
Signed-off-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements a separate path for L2 VMEntry in run_vcpu(),
which has several benefits:
- keep run_vcpu() clean, to reduce the number of is_vcpu_in_l2_guest()
statements:
- current code has three is_vcpu_in_l2_guest() already.
- supposed to have another 2 statement so that nested VMEntry won't
hit the "Starting vCPU" and "vCPU launched" pr_info() and a few
other statements in the VM launch path.
- save few other things in run_vcpu() that are not needed for nested.
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
In run time, one vCPU won't read or write a register on other vCPUs,
thus we don't need the LOCK prefixed instructions on reg_cached and
reg_updated.
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move the bitmap test call out of vcpu_inject_exception(), then we call
the expensive bitmap_test_and_clear_lock() only pending_req_bits is
non-zero and call vcpu_inject_exception() only if needed.
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
In very large number of VM extis, the VM-exit instruction length could be
zero, and it's no need to update VMX_GUEST_RIP.
Some examples:
- all external interrupt VM exits in non LAPIC passthru setup.
- for all the nested VM-exits that are reflecting to L1 hypervisor.
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- wrap a new function exec_vmentry() to reduce code duplication.
- remove exec_vmread(VMX_GUEST_RSP) since ACRN doesn't need to know
guest RSP in run time.
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Change "uint64_t vmcs_hva" to "void *vmcs_hva" in the input argument,
list, so that no type casting is needed when calling them from pointers.
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current design, when pass-thru dev,
for the PIO bar, need to ensure the guest PIO start address
equals to host PIO start address.
Then set the VMCS io bitmap to pass-thru the corresponding
port io to guest for performance.
ACRN-DM and acrn-config should ensure the identical mapping of PIO bar.
If ACRN-DM or acrn-config failed to achieve this,
we should deny the launch of VM
Tracked-On: #6508
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
In the commit of 4e1deab3d9, we changed the
init sequence that init paging first and then init e820 because we worried
about the efi memory map could be beyond 4GB space on some platform.
After we double checked multiboot2 spec, when system boot from multiboot2
protocol, the efi memory map info will be embedded in multiboot info so it
is guaranteed that the efi memory map must be under 4GB space. Consider that
the page table will be allocated in free memory space in future, we have
to change the init sequence back that init e820 first and then init paging.
If we need to support other boot protocol in future that the efi memory map
might be put beyond 4GB, we could have below options:
1. Request bootloader put efi memory map below 4GB;
2. Call EFI_BOOT_SERVICES.GetMemoryMap() before ExitBootServices();
3. Enable a early 64bit page table to get the efi memory map only;
Tracked-On: #5626
Signed-off-by: Victor Sun <victor.sun@intel.com>
This patch changes the size of vvmcs[] array from 1 to
PER_VCPU_ACTIVE_VVMCS_NUM, and actually enables multiple active VMCS12
support in ACRN. The basic operations:
- if L1 VMPTRLDs a VMCS12 without previously VMCLEAR the current
VMCS12, ACRN no longer unconditionally flushes the current VMCS12
back to L1. Instead, it tries to keep both the current and the newly
loaded VMCS12 in the nested->vvmcs[] array, unless:
- if there is no more available vvmcs[] entry, ACRN flushes one active
VMCS12 to make room for this new VMCS12.
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Some processors don't support VMX_PROCBASED_CTLS_TERTIARY bit
and VMX_PROCBASED_CTLS2_UWAIT_PAUSE bit in MSRs
(IA32_VMX_PROCBASED_CTLS & IA32_VMX_PROCBASED_CTLS2),
HV will output error log which will cause confusion,
change the log level from pr_err to pr_info.
Tracked-On: #6397
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
This patch adds a new priority based scheduler to support
vCPU scheduling based on their pre-configured priorities.
A vCPU can be running only if there is no higher priority
vCPU running on the same pCPU.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
In local APIC passthrough case, when devices triggered a INTx interrupt, this
interrupt would be delivered to vCPU directly. For this case, need to set the
virtual vector in
the 'Interrupt Vector' field of physical IOxAPIC I/O REDIRECTION TABLE REGISTER
(bits 7:0) and 'Vector' field of vt-d Interrupt Remapping Table Entry (IRTE)
for Remapped Interrupts.
Assumption:
(a) IOAPIC pins won't be shared between LAPIC PT guest and other guests;
(b) The guest would not trigger this IRQ before it switched to x2 APIC mode.
Tracked-On: #5923
Signed-off-by: Zide Chen <zide.chen@intel.com>
check some essential vmx capablility,
will panic if processor doesn't support it.
Tracked-On: #6584
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current RDT code, if CDP is configured, L2/L3 resources' num_closids calculation
is wrong:
res_cap_info[res].num_closids = (uint16_t)((edx & 0xffffU) >> 1U) + 1U;
Should be:
res_cap_info[res].num_closids = (uint16_t)((edx & 0xffffU) >> 1U + 1) >> 1U;
Aslo, in order to enable CDP system-wide, need to enable the CDP bit (bit 0) on all pcpus,
not just on pcpu 0.
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Rename the clos_max field in struct rdt_info to num_closids
Rename variable valid_clos_num to common_num_closids and make it static
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
These dirty flags are supposed to be per VMCS12, so move them from the
per vCPU acrn_nested struct to the newly added acrn_vvmcs struct.
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This variable represents the L1 GPA of the current VMCS12. But it's
no longer needed in the multiple active VMCS12 case, which uses the
following variables for this purpose.
- nested->current_vvmcs refers to the vvmcs[] entry which contains the
cached current VMCS12, its associated VMCS02, and other context info.
- nested->current_vvmcs->vmcs12_gpa refers to the L1 GPA of this
current VMCS12.
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add an array of struct acrn_vvmcs to struct acrn_nested, so it is
possible to cache multiple active VMCS12s.
This patch declares the size of this array to 1, meaning that there is
only one active VMCS12. This is to minimize the logical code changes.
Add pointer current_vvmcs to struct acrn_nested, which refers to the
current vvmcs[] entry. In this patch, if any VMCS12 is active, it
always points to vvmcs[0].
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
No any logical changes, this patch is preparing for multiple active
VMCS12 support.
- currently it's easy to get the vmcs12 pointer from the vcpu pointer.
In multiple active vmcs12 case, we need to explicitly add "struct
acrn_vmcs12 *vmcs12" to certain APIs' input argument list, in order to
get the desired vmcs12 pointer.
- merge flush_current_vmcs12() into clear_vmcs02() for multiple reasons:
a) it's called only once; b) we don't wrap the opposite operation
(loading vmcs12) in an API; c) this API has simple and clear logic.
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
By changing the way to assign L1 VPID from bottom-up to top-down,
the possibilities for VPID conflicts between L1 and L2 guests are
small.
Then we can flush VPID just in case of conflicting.
Tracked-On: #6289
Signed-off-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In run time, it's rare for L1 to write to the intercepted non host-state
VMCS fields, and using multiple dirty flags is not necessary.
This patch uses one single dirty flag to manage all non host-state VMCS
fields. This helps to simplify current code and in the future we may
not need to declare new dirty flags when we intercept more VMCS fields.
Tracked-On: #5923
Signed-off-by: Zide Chen <zide.chen@intel.com>
Currently vmptrld_vmexit_handler() doesn't sync VMX_EPT_POINTER_FULL
from vmcs12 to vmcs02, instead it sets gpa_field_dirty and relies on
nested_vmentry() to sync EPTP in next nested VMentry.
This creates readability issue since all other intercepted VMCS fields
are synced in sync_vmcs12_to_vmcs02(). Another issue is that other
VMCS fields managed by gpa_field_dirty are repeatedly synced in both
vmptrld and nested vmentry handler.
This patch moves get_nept_desc() ahead of sync_vmcs12_to_vmcs02(), such
that shadow_eptp is allocated before sync_vmcs12_to_vmcs02() which
can sync EPTP properly.
BTW, in nested_vmexit_handler(), don't need to read from VMCS to get
the exit reason, since vcpu->arch.exit_reason has it already.
Tracked-On: #5923
Signed-off-by: Zide Chen <zide.chen@intel.com>
The locked btr instruction is expensive. This patch changes the
logic to ensure that the bitmap is non-zero before executing
bitmap_test_and_clear_lock().
The VMX transition time gets significant improvement. SOS running
on TGL, the CPUID roundtrip reduces from ~2400 cycles to ~2000 cycles.
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently ACRN assumes firmware setup IA32_PAT correctly. This patch
explicitly initializes host IA32_PAT MSR according to ISDM Table 11-12.
Memory Type Setting of PAT Entries Following a Power-up or Reset.
ACRN creates host page tables based on PAT0 (WB) and PAT3 (UC).
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
is_lapic_pt_enabled() is called at least twice in one loop of the vCPU
thread, and it's called in vmexit_handler() frequently if LAPIC is not
pass-through. Thus the efficiency of this function has direct
impact to the system performance.
Since the LAPIC mode is not changed in run time, we don't have to
calculate it on the fly in is_lapic_pt_enabled().
BTW, removed the unused lapic_mask from struct acrn_vcpu_arch.
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For platforms that do not support XSAVES/XRSTORS instructions, like QEMU,
executing these instructions causes #UD.
This patch adds the check before the execution of XSAVES/XRSTORS instructions.
It also refines the logic inside rstore_xsave_area for the following reason:
If XSAVES/XRSTORS instructions are supported, restore XSAVE area if any of the
following conditions is met:
1. "vcpu->launched" is false (state initialization for guest)
2. "vcpu->arch.xsave_enabled" is true (state restoring for guest)
* Before vCPU is launched, condition 1 is satisfied.
* After vCPU is launched, condition 2 is satisfied because
is_valid_xsave_combination() guarantees that "vcpu->arch.xsave_enabled"
is consistent with pcpu_has_cap(X86_FEATURE_XSAVES).
Therefore, the check against "vcpu->launched" and "vcpu->arch.xsave_enabled"
can be eliminated here.
Tracked-On: #6481
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Use an unused MSR on host to save ACRN pcpu ID and avoid saving and
restoring TSC AUX MSR on VMX transitions.
Tracked-On: #6289
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
This feature is guarded under config CONFIG_SECURITY_VM_FIXUP, which
by default should be disabled.
This patch passthrough native SMBIOS information to prelaunched VM.
SMBIOS table contains a small entry point structure and a table, of which
the entry point structure will be put in 0xf0000-0xfffff region in guest
address space, and the table will be put in the ACPI_NVS region in guest
address space.
v2 -> v3:
uuid_is_equal moved to util.h as inline API
result -> pVendortable, in function efi_search_guid
recalc_checksum -> generate_checksum
efi_search_smbios -> efi_search_smbios_eps
scan_smbios_eps -> mem_search_smbios_eps
EFI GUID definition kept
Tracked-On: #6320
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
This helps to improve performance:
- Don't need to execute VMREAD in vcpu_get_efer(), which is frequently
called.
- VMX_EXIT_CTLS_SAVE_EFER can be removed from VM-Exit Controls.
- If the value of IA32_EFER MSR is identical between the host and guest
(highly likely), adjust the VMX controls not to load IA32_EFER on
VMExit and VMEntry.
It's convenient to continue use the exiting vcpu_s/get_efer() APIs,
other than the common vcpu_s/get_guest_msr().
Tracked-On: #6289
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Mask off support of 57-bit linear addresses and five-level paging.
ICX-D has LA57 but ACRN doesn't support 5-level paging yet.
Tracked-On: #6357
Signed-off-by: Liang Yi <yi.liang@intel.com>
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
