Per trusty design, trusty requires a monotonic increasing
secure tick(TSC) at run time. This secure tick will used
to mitigate password/pin force attack, control key expiration,
etc.
Currently, the TSC_OFFSET is enabled. And guest will got
(host_tsc + tsc_offset) when execute rdtsc/rdtscp/rdmsr to
aquire tsc value. The host_tsc is always keeping increasing
during the runtime.
So initialize tsc_offset of trusty to 0 will ensure the
secure tick feature.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
eptp should be record as PA.
this patch changed nworld_eptp, sworld_eptp and m2p eptp to PA type,
necessary HPA2HVA/HVA2HPA transition is used for them after the change.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- read/write page table entries should use VA which defined as "void *"
- the address data in page table entries should us PA which defined as
"uint64_t"
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The cpu model name of "Intel(R) Celeron(R) CPU J3455 @ 1.50GHz" is used for
APL NUC which is in Acrn official suport list.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Currently acrn partitions cpus between SOS and UOS, so the default
policy is to allow guest managing CPU px state. However we would
not blindly passthrough perf_ctrl MSR to guest. Instead guest access
is always trapped and validated by acrn hypervisor before forwarding
to pcpu. Doing so leaves room for future power budget control in
hypervisor, e.g. limiting turbo percentage that a cpu can enter.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
We can use this interface for VHM to pass per-cpu power state data
to guest per its request.
For now the vcpu power state is per-vm, this could be changed if
per-cpu power state support is required in the future.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The vm px info would be used for guest Pstate control.
Currently it is copied from host boot cpu.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The patch takes Intel ATOM A3960 as example that hard code all Px info
which is needed for Px control into Acrn HV and load it in boot process.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The cpu model name would be used to distinguish which hard coded data
need to be loaded to boot_cpu_data;
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
all callers for fetch_page_table_offset should already make sure
it will not come to an unknown table_leve, so just panic here.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
- walk_paging_struct should return sub_table_addr, if something wrong,
it return NULL
- update_page_table_entry should return adjusted_size, if something wrong
it return 0
the change is valid under release version, as at that time, ASSERT in
walk_paging_struct is empty.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- remove unused map_params in get_table_entry
- add error return for both, which is valid under release version,
as at that time, ASSERT in get_table_entry is empty.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
function break_page_table should return next_level_page_size, if
something wrong, it return 0.
the change is valid for release version, as at that time ASSERT()
in break_page_table is empty.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
function map_mem_region should return mapped_size, if something wrong,
it return 0.
the change is valid for release version, as at that time ASSERT()
in map_mem_region is empty.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
add error return for all, which is valid under release version,
as at that time, ASSERT in modify_paging is empty.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
malloc: allocate a block of memory, the contents of the block are undefined.
calloc: allocate a block of memory for an array of num elements and initializes all its bits to zero.
Signed-off-by: yechunliang <yechunliangcn@163.com>
Add check_continuous_hpa API:
when create secure world,if the physical
address is not continuous, will assert.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch added API destroy_secure_world, which will do:
-- clear trusty memory space
-- restore memory to SOS ept mapping
It will be called when VM is destroyed, furthermore, ept of
Secure world will be destroyed as well.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove TODO comments since it has been done below the comments.
Typo fix: startup_info --> startup_param.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1.it doesn't support VMX for guest OS
2.for MSR out of control, inject GP to guest OS.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
--add free_paging_struct api, used for free page tables
it will clear memory before free.
--add HPA2HVA translation when free ept memory
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Before this patch, HV accesses PML4E of secure world when the PML4
doesn't exist,will access null pointer.
Fix as follow:
Before the copy of PDPTE,will allocate memory and write PML4E,
then copy the PDPTE.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per SDM Vol. 2:
If CPUID.80000008H:EAX[7:0] is supported, the maximum physical address
number supported should come from this field.
This patch gets the maximum physical address number from CPUID leaf
0x80000008 and calculates the physical address mask when the leaf is
available.
Currently ACRN does not support platforms w/o this leaf and will panic
on such platforms.
Also call get_cpu_capabilities() earlier since the physical address mask
is required for initializing paging.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per SDM:
When CPUID executes with EAX set to 80000000H, the processor returns
the highest value the processor recognizes for returning extended
processor information. The value is returned in the EAX register and is
processor specific.
This patch caches this value in the global cpuinfo_x86.cpuid_leaves. This
value will be used to check the availability of any CPUID extended
function.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
enable TSC offset in VMX, so if TSC MSR is changed by guest OS,
write a caculated value into TSC-offset, then host TSC will not be changed.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
enable Xsave feature and pass-through it to guests
update based on v2:
- enable host xsave before expose it to guests.
- add validation for the value to be set to 'xcr0' before call xsetbv
when handling xsetbv vmexit.
- tested in SOS guest, created two threads to do different
FP calculations,test code runs in user land of sos.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
According to C99:
The empty list in a function declarator that is not part of a definition of
that function specifies that no information about the number or types of the
parameters is supplied.
This means gcc is happy with the following code, which is undesirable.
void foo(); /* declaration with an empty parameter list */
void bar() {
foo(); /* OK */
foo(1); /* OK */
foo(1, 2); /* OK */
}
This patch fixes declarations of functions with empty parameter lists by adding
an unnamed parameter of type void, which is the standard way to specify that a
function has no parameters. The following coccinelle script is used.
@@
type T;
identifier f;
@@
-T f();
+T f(void);
New compilation errors are fixed accordingly.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
A bugfix for saving secure world memory info.
Maybe there are multiple UOS, each VM has its own secure
world and normal world, should save memory info into individual VM.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
On some toolchain configurations direct struct assignments will
default to a memcpy operation which is not present in this
environment, so explicitly use the internal memcpy_s function.
Signed-of-by: Rusty Lynch <rusty.lynch@intel.com>
Save the pointer of efi_ctx in mi_drivers_addr field of
multiboot structure and pass to hypervisor, not by
saving in register RDX(the third default parameter in
64bit call function).
With this method, we can be compatible with the original
32bit boot parameters passing method and no need to
large the array size of boot_regs in hypervisor.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Currently, the serial log is printed through IO(0x3f8).
Secure World will print serial log by port 0x3f8. So
remove the ASSERT for Secure World booting.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
For trusty bring-up, key_info is needed.
Currently, bootloader did not transfer key_info to hypervisor.
So in this patch, use dummy key_info temporarily.
Derive vSeed from dSeed before trusty startup, the vSeed will
bind with UUID of each VM.
Remove key_info from sworld_control structure.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
UOS_Loader will trigger boot of Trusty-OS by HC_INITIALIZE_TRUSTY.
UOS_Loader will load trusty image and alloc runtime memory for
trusty. UOS_Loader will transfer these information include
trusty runtime memory base address, entry address and memory
size to hypervisor by trusty_boot_param structure.
In hypervisor, once HC_INITIALIZE_TRUSTY received, it will create
EPT for Secure World, save Normal World vCPU context, init
Secure World vCPU context and switch World state to Secure World.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
For ARM, The SMC instruction is used to generate a synchronous
exception that is handled by Secure Monitor code running in EL3.
In the ARM architecture, synchronous control is transferred between
the normal Non-secure state and the Secure state through Secure
Monitor Call exceptions. SMC exceptions are generated by the SMC
instruction, and handled by the Secure Monitor.The operation of
the Secure Monitor is determined by the parameters that are passed
in through registers.
For ACRN, Hypervisor will simulate SMC by hypercall to switch vCPU
State between Normal World and Secure World.
There are 4 registers(RDI, RSI, RDX, RBX) reserved for paramters
passing between Normal World and Secure World.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
for release version, the vuart is not be used - pin 4 then is not used
by hypervisor.
this patch adds check for vm0->vuart to distinguish it.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
functions ptdev_build_physical_rte & activate_physical_ioapic
doesn't need to get parameters like phys_irq, ptdev_intx_info or vector
from caller, instead they can derive from entry.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
this patch is a preparation for changing ptdev remapping entry from
virtual to physical based, it changes the ptdev_lock from per-vm to
global, as entries based on physical mode are global resource.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
this patch is a preparation for changing ptdev remapping entry from
virtual to physical based, it changes the ptdev_list from per-vm to
global, as entries based on physical mode are global resource.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Generate all common virtual cpuid entries for flexible support of
guest VCPUID emulation, by decoupling from PCPUID.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Chen, Jason CJ <jason.cj.chen@intel.com>
microcode update from UOS is disabled.
microcode version checking is available for both SOS and UOS.
There are two TODOs of this patch:
1. This patch only update the uCode on pCPUs SOS owned. For the
pCPUs not owned by SOS, the uCode is not updated. To handle
this gap, we will have SOS own all pCPUs at boot time. So
all pCPUs could have uCode updated. This will be handled
in the patch to enable SOS own all pCPUs at boot time.
2. gva2gpa now doesn't check possible page table walk failure.
Will add the failure check in gva2gpa in different patch.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Anthony Xu (anthony.xu@intel.com)
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
Add a global boot_cpu_data to cache common cpu capbility/feature
for detect cpu capbility/feature.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
