In current implementation, if there are multiple continous 4k-aligned
modules, 0-sized e820 entries will be created between these regions.
And for non-4k-aligned modules, when two of them are located in one
page, the second memory range will not be reserved as it was not in
one e820 entry after the first is reserved, making it vulnerable.
This patch fixes it by marking the exact memory range of multiboot
modules as unusable first, then shrinking the e820 entries to page
boundary. If the module crosses multiple e820 entries, possibly due
to a buggy bootloader, hypervisor will panic immediately to prevent
modules getting corrupted.
Tracked-On: #8617
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Some cpuids will return invalid values on hybrid platform because of the
error in the pointer arithmetic. Add `(void *)` before
`cpu_cpuids.leaves`.
Leaf 0x14 is used to report Intel Processor Trace Enumeration and varies
between P-cores and E-cores on hybrid platform. So add it to
`hybrid_leaves`.
Tracked-On: #8608
Fixes: 59a8cc4c2 ("hv: cpuid: make leaf 0x4 per-cpu in hybrid architecture")
Signed-off-by: Haiwei Li <haiwei.li@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
In HV, cpuid uses the lower 32 bits of rax\rbx\rcx\rdx registers to pass parameters,
But the software does not clear the upper 32-bit registers, if the guest
uses 64-bit variables to pass parameters to cpuid，guest will use rax\rbx\rcx\rdx,
not eax\ebx\ecx\edx, the previous value of the high 32 registers will affect the guest.
Tracked-On: #8605
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Signed-off-by: andi6 <andi6@xiaomi.com>
P-cores and E-cores accessing leaf 0x2U/0x14U/0x16U/0x18U/0x1A/0x1C/0x80000006U
will have different information in hybrid architecture.
So add them to per-cpu list in hybrid architecture and directly return
the physical value.
Note: 0x14U is hided and return 0.
Tracked-On: #8608
Signed-off-by: Haiwei Li <haiwei.li@intel.com>
Leaf 0x6 returns thermal and power management information. In
hybrid architecture, P-cores and E-cores have different information.
Add leaf 0x6 to per-cpu list in hybrid architecture and handle specific
cpuid access.
Tracked-On: #8608
Signed-off-by: Haiwei Li <haiwei.li@intel.com>
Leaf 0x4 returns deterministic cache parameters for each level. In
hybrid architecture, P-cores and E-cores have different cache
information.
Add leaf 0x4 to per-cpu list in hybrid architecture and handle specific
cpuid access.
Tracked-On: #8608
Signed-off-by: Haiwei Li <haiwei.li@intel.com>
CPUID returns processor identification and feature information.
Different pcpus may return different infos. That is, the info is
per-cpu.
In hybrid architecture, per-cpu leaf is different from the previous. So
introduce a struct percpu_cpuids to indicate the per-cpu leaf. struct
percpu_cpuids will consist of two parts: generic percpu leaves and
hybrid related percpu leaves.
This patch is just to add generic percpu leaves.
Tracked-On: #8608
Signed-off-by: Haiwei Li <haiwei.li@intel.com>
CPUID leaf 1f is preferred superset of leaf 0b, currently ACRN exposes
leaf 0b but leaf 1f is empty so the 2 leaves mismatch, and so
application will follow the SDM to check 1f first.
Tracked-On: #8608
Signed-off-by: Xin Zhang <xin.x.zhang@intel.com>
This patch can fetch the thermal lvt irq and propagate
it to VM.
At this stage we support the case that there is only one VM
governing thermal. And we pass the hardware thermal irq to this VM.
First, we register the handler for thermal lvt interrupt, its irq
vector is THERMAL_VECTOR and the handler is thermal_irq_handler().
Then, when a thermal irq occurs, it flags the SOFTIRQ_THERMAL bit
of softirq_pending, This bit triggers the thermal_softirq() function.
And this function will inject the virtual thermal irq to VM.
Tracked-On: #8595
Signed-off-by: Zhangwei6 <wei6.zhang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
In this phase, we only use one VM to control thermal.
So we make thermal MSRs readable and writable by this VM.
This VM is flagged with GUEST_FLAG_VTM, and can
read/write thermal MSRs.
For the VMs not flagged with GUEST_FLAG_VTM,
can only read these thermal MSRs to get current status.
Tracked-On: #8595
Signed-off-by: Zhangwei6 <wei6.zhang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Leave canary of stack protector untouched on pCPU
if it has been initialized, instead of generating a new one.
Tracked-On: #8577
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
ppt_page_pool.bitmap should be zero-initialized. Also fixes the wrong
indention in allocate_ppt_pages().
Tracked-On: #8559
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
In the triple fault handler, post-launched VMs are instantly turned
off. Now a vm event is generated simultaneously. So that
developers can capture the event and decide what to do with it. (e.g.,
logging and populating diagnostics, or poweroff VM)
Tracked-On: #8547
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
This patch creates vm_event support in HV, including:
1. Create vm_event data type.
2. Add vm_event sbuf and its initializer. The sbuf will be allocated by
DM in Service VM. Its page address will then be share to HV through
hypercall.
3. Add an API to send the HV generated event.
Tracked-On: #8547
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Abstract out schedulers config data for vCPU threads and other hypervisor
threads to sched_params structure. And it's used to initialize per
thread scheduler private data. The sched_params for vCPU threads come
from vm_config generated by config tools while other hypervisor threads
need give them explicitly.
Tracked-On: #8500
Signed-off-by: Qiang Zhang <qiang4.zhang@intel.com>
make_request sets the request bit, and signal_event wakes the vcpu
thread. If we signal_event comes first, the target vCPU has a chance to
sleep again before processing the request bit.
Tracked-On: #8507
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
When all vCPU threads on one pCPU are put to sleep (e.g., when all
guests execute HLT), hv would schedule to idle thread. Currently the
idle thread executes PAUSE which does not enter any c-state and consumes
a lot of power. This patch is to support HLT in the idle thread.
When we switch to HLT, we have to make sure events that would wake a
vCPU must also be able to wake the pCPU. Those events are either
generated by local interrupt or issued by other pCPUs followed by an
ipi kick.
Each of them have an interrupt involved, so they are also able to wake
the halted pCPU. Except when the pCPU has just scheduled to idle thread
but not yet halted, interrupts could be missed.
sleep-------schedule to idle------IRQ ON---HLT--(kick missed)
^
wake---kick|
This areas should be protected. This is done by a safe halt
mechanism leveraging STI instruction’s delay effect (same as Linux).
vCPUs with lapic_pt or hv with CONFIG_KEEP_IRQ_DISABLED=y does not allow
interrupts in root mode, so they could never wake from HLT (INIT kick
does not wake HLT in root mode either). They should continue using PAUSE
in idle.
Tracked-On: #8507
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
~0UL is widely used to specify the maximum memory size
when calling e820_alloc_memory(), this patch to define
a MACRO for it to avoid using this magic number.
Tracked-On: #8502
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
For a pdev which allocated to prelaunched VM or owned by HV, we need to check
whether it is a multifuction dev at function 0. If yes we have to emulate a
dummy function dev in Service VM, otherwise the sub-function devices will be
lost in guest OS pci probe process.
Tracked-On: #8492
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Signed-off-by: Qiang Zhang <qiang4.zhang@intel.com>
Signed-off-by: Victor Sun <victor.sun@intel.com>
When we do init_all_dev_config() in pci.c, the pdevs added to pci dev_config
will be exposed to Service VM or passthru to prelauched VM. The original code
would find service VM config in every pci pdev init loop, this is unnecessary
and definitely impact performance. Here we generate Service VM config pointer
with config tool so that init_one_dev_config() could refer service VM config
directly.
Tracked-On: #8491
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Signed-off-by: Qiang Zhang <qiang4.zhang@intel.com>
Signed-off-by: Victor Sun <victor.sun@intel.com>
Rename is_allocated_to_prelaunched_vm to allocate_to_prelaunched_vm as
it not only checks whether the PCI device is allocated to a Pre-launched
VM but also associate it with Pre-launched VM's dev_config.
Tracked-On: #8491
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Signed-off-by: Qiang Zhang <qiang4.zhang@intel.com>
On some platforms, the last e820 entry may not be of type E820_TYPE_RAM,
such as E820_TYPE_ACPI_NVS which may also be used by Service VM.
So we need take all e820 entry types into account when finding the upper
bound of Service VM EPT mapping.
Tracked-On: #8495
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Signed-off-by: Qiang Zhang <qiang4.zhang@intel.com>
doxygen will warn that documented return type is found for functions
that does not return anything in 1.9.4 or later versions. 'None' is
not a special keyword in doxyge, it will recognize it as description
to the return value that does not exist in void functions.
Tracked-On: #8425
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
The Hardware Feedback Interface (HFI) and Intel® Thread Director (ITD)
features require OS to provide a physical page address to
IA32_HW_FEEDBACK_PTR. Then the hardware will update the processor
information to the page address. The issue is that guest VM will program
its GPA to that MSR, causing great risk of tempering memory.
So HFI and ITD should be made invisible to guests, until we provide
proper virtulization of those features.
Tracked-On: #8463
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
ffs64() returns INVALID_BIT_INDEX (0xffffU) when it tries to deal with
zero input value. This may happen In calculate_logical_dest_mask() when
the guest tries to write some illegal destination IDs to MSI config
registers of a pt-device. The ffs64() return value is used as per_cpu
array index, and it would cause a page fault.
This patch adds protection to the per_cpu array, making this function
return zero on illegal value. As in logical destination's definition, a
zero logical designation would point to no CPU.
Fixes: 89d11d91e
Tracked-On: #8454
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
According to SDM Vol3 11.12.10, in x2APIC mode, Logical Destination has
two parts:
- Cluster ID (LDR[31:16])
- Logical ID (LDR[15:0])
Cluster ID is a numerical address, while Logical ID is a 16bit mask. We
can only use Logical ID to address multi destinations within a Cluster.
So we can't just 'or' all the Logical Destination in LDR registers to
get one mask for all target pCPUs. This would get a wrong destination
mask if the target Destinations are from different Clusters.
For example in ADL/RPL x2APIC LDRs for core 2-5 are 0x10001 0x10100
0x20001 0x20100. If we 'or' them together, we would get a Logical
Destination of 0x30101, which points to core 6 and another core.
If core 6 is running a RTVM, then the irq is unable to get to
core 2-5, causing the guest on core 2-5 driver fail.
Guests working in xAPIC mode may use 'Flat Model' to select an
arbitrary list of CPUs as its irq destination. HV may not be able to
include them all when transfering to physical destinations, because
the HW is working in x2APIC mode and can only use 'Cluster Model'.
There would be no perfect fix for this issue. This patch is a simple
fix, by just keep the first Cluster of all target Logical Destinations.
Tracked-On: #8435
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Guests bootloader may read MSR_PLATFORM_INFO to get TSC frequency for
time measurement, so injecting #GP on read may crash the vm on boot.
This patch emulates MSR_PLATFORM_INFO with 0, same behavior in kvm, to
tell the guest it's a virtualized environment.
Tracked-On: #8406
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Thermal events are delivered through lapic thermal LVT. Currently
ACRN does not support delivering those interrupts to guests by
virtual lapic. They need to be virtualized to provide guests some
thermal management abilities. Currently we just hide thermal
lvt from guests, including:
1. Thermal LVT:
There is no way to hide thermal LVT from guests. But we need do
something to make sure no interrupt can be actually trigered:
- skip thermal LVT in vlapic_trigger_lvt()
- trap-and-emulate thermal LVT in lapic-pt mode
2. As We have plan to introduce virtualization of thermal monitor in the
future, we use a vm flag GUEST_FLAG_VTM which is default 0 to control
the access to it. So that it can help enabling VTM in the future.
Tracked-On: #8414
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Changes made by this patch includes:
1. Emulate HWP and pstate MSRs/CPUIDs. Those are exposed to guest when
the GUEST_FLAG_VHWP is set:
- CPUID[6].EAX[7,9,10]: MSR_IA32_PM_ENABLE(enabled by hv, always read
1), MSR_IA32_HWP_CAPABILITIES, MSR_IA32_HWP_REQUEST,
MSR_IA32_HWP_STATUS,
- CPUID[6].ECX[0]: MSR_IA32_MPERF, MSR_IA32_APERF
- MSR_IA32_PERF_STATUS(read as base frequency when not owning pCPU)
- MSR_IA32_PERF_CTL(ignore writes)
2. Always hide HWP interrupt and package control MSRs/CPUIDs:
- CPUID[6].EAX[8]: MSR_IA32_HWP_INTERRUPT(currently ACRN is not able
to deliver thermal LVT virtual interrupt to guests)
- CPUID[6].EAX[11,22]: MSR_IA32_HWP_REQUEST_PKG, MSR_IA32_HWP_CTL
Tracked-On: #8414
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Currently CPU frequency control is hidden to guests, and controlled
by hypervisor. While it is sufficient in most cases, some guest OS may
still need CPU performance info to make multi-core scheduling decisions.
This is seen on Linux kernel, which uses HWP highest performance level
as CPU core's priority in multi-core scheduling (CONFIG_SCHED_MC_PRIO).
Enabling this kernel feature could improve performance as single thread
workloads are scheduled on the highest performance cores. This is
significantly useful for guests with hybrid cores.
The concept is to expose performance interface to guest who exclusively
owns pCPU assigned to it. So that Linux guest can load intel_pstate
driver which will then provide the kernel with each core's schedule
priority.
Intel_pstate driver also relies on CONFIG_ACPI_CPPC_LIB to implement
this mechanic, this means we also need to provide ACPI _CPC in DM.
This patch sets up a guest flag GUEST_FLAG_VHWP to indicate whether
the guest can have VHWP feature.
Tracked-On: #8414
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
This patch refactors partition_epc() to make the code easier to
understand, also fixes the maybe-uninitialized warning for gcc-13.
Initializing 'vm_config' to get_vm_config(0) is okay here as scenario
validator ensures CONFIG_MAX_VM_NUM to be always larger than 0.
Tracked-On: #8413
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
This patch emulates the PLATFORM_INFO MSR in hypervisor to make it
only visible to Service VM, and only processor ratios (bit 15:8,
47:40 and 55:48) and sample part bit (27) are exponsed. This is
intended to prevent Service VM from changing processor parameters
like turbo ratio.
Tracked-On: #8406
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
When assigning a physical interrupt to a Post-launched VM, if it has
been assigned to ServiceVM, we should remove that mapping first to reset
ioapic pin state and rte, and build new mapping for the Post-launched
VM.
Tracked-On: #8370
Signed-off-by: Qiang Zhang <qiang4.zhang@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The version info is mainly used to tell the user when and where the binary is
compiled and built, this will change the hv version format.
The hv follows the format:
major.minor-stable/unstable-remote_branch-acrn-commit_date-commit_id-dirty
DBG/REL(tag-current_commit_id) scenario@board build by author date.
The '(tag-current_commit_id)' is optional, it exits only when there are
tags for current commit.
e.g.
with tag:
ACRN:\>version
HV: 3.1-stable-release_3.1-2022-09-27-11:15:42-7fad37e02-dirty DBG(tag: v3.1)
scenario3.1@my_desk_3.1 build by zhangwei 2022-11-16 07:02:37
without tag:
ACRN:\>version
HV: 3.2-unstable-master-2022-11-16-14:34:49-11f53d849-dirty DBG
scenario3.1@my_desk_3.1 build by zhangwei 2022-11-16 06:49:44
Tracked-On #8303
Signed-off-by: Zhangwei6 <wei6.zhang@intel.com>
When CPU support MONITOR/MWAIT, OS prefer to use it enter
deeper C-state.
Now ACRN pass through MONITOR/MWAIT to guest.
For vCPUs (ie vCPU A and vCPU B) share a pCPU, if vCPU A uses MWait to enter C state,
vCPU B could run only after the time slice of vCPU A is expired. This time slice of
vCPU A is gone to waste.
For Local APIC pass-through (used for RTVM), the guest pay more attention to
timeliness than power saving.
So this patch hides MONITOR/MWAIT by:
1. Clear vCPUID.05H, vCPUID.01H:ECX.[bit 3] and
MSR_IA32_MISC_ENABLE_MONITOR_ENA to tell the guest VM's vCPU
does not support MONITOR/MAIT.
2. Enable MSR_IA32_MISC_ENABLE_MONITOR_ENA bit for
MSR_IA32_MISC_ENABLE inject 'GP'.
3. Trap instruction 'MONITOR' and 'MWAIT' and inject 'UD'.
4. Clear vCPUID.07H:ECX.[bit 5] to hide 'UMONITOR/UMWAIT'.
5. Clear "enable user wait and pause" VM-execution control, so
UMONITOR/MWAIT causes an 'UD'.
Tracked-On: #8253
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
The current code uses a predefined sworld memory array to reserve memory
for trusty VMs, and assume all post launched VMs are trusty VM which is
not correct.
This patch statically reserved memory just for trusty VMs and save 16M
memory for every non trusty VM.
Tracked-On: #6690
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
The design of ACRN CPU performance management is to let hardware
do the autonomous frequency selection(or set to a fixed value),
and remove guest's ability to control CPU frequency.
This patch is to implement the CPU frequency initializer, which will
setup CPU frequency base on the performance policy type.
Two performance policy types are provided for user to choose from:
- 'Performance': CPU runs at its CPU runs at its maximum frequency.
Enable hardware autonomous frequency selection if HWP is presented.
- 'Nominal': CPU runs at its guaranteed frequency.
The policy type is passed to hypervisor through boot parameter, as
either 'cpu_perf_policy=Nominal' or 'cpu_perf_policy=Performance'.
The default type is 'Performance'.
Both HWP and ACPI p-state are supported. HWP is the first choice, for
it provides hardware autonomous frequency selection, while keeps
frequency transaction time low.
Two functions are added to the hypervisor to call:
- init_frequency_policy(): called by BSP at start up time. It processes
the boot parameters, and enables HWP if it is presented.
- apply_frequency_policy(): called after init_frequency_policy().
It applies initial CPU frequency policy setting for each core. It
uses a set of frequency limits data struct to quickly decide what the
highest/nominal frequency is. The frequency limits are generated by
config-tools.
The hypervisor will not be governing CPU frequency after initial policy
is applied.
Cores running RTVMs are fixed to nominal/guaranteed frequency, to get
more certainty in latency. This is done by setting the core's frequency
limits to highest=lowest=nominal in config-tools.
Tracked-On: #8168
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add hypercall to add/remove asyncio request info. Hv will record the
info in a list, and when a new ioreq is come, hv will check if it is
in the asyncio list, if yes, queue the fd to asyncio buffer.
Tracked-On: #8209
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Current IO emulation is synchronous. The user VM need to wait for the
completion of the the I/O request before return. But Virtio Spec
introduces introduces asynchronous IO with a new register in MMIO/PIO
space named NOTIFY, to be used for FE driver to notify BE driver, ACRN
hypervisor can emulate this register by sending a notification to vCPU
in Service VM side. This way, FE side can resume to work without waiting
for the full completion of BE side response.
Tracked-On: #8209
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Improve SMP call to support ACRN shell to operate RTVM.
before, the RTVM CPU can't be kicked off by notification IPI,
so some shell commands can't support it, like rdmsr/wrmsr,
memory/registers dump. So INIT will be used for RTVM, which
LAPIC is pass-thru.
Tracked-On: #8207
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
By default, notification IPI used to kick sharing pCPU, INIT
used to kick partition pCPU. If USE_INIT_IPI flag is passed to
hypervisor, only INIT will be used to kick pCPU.
Tracked-On: #8207
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
INIT signal has been used to kick off the partitioned pCPU, like RTVM,
whose LAPIC is pass-through. notification IPI is used to kick off
sharing pCPU.
Add mode_to_kick_pcpu in per-cpu to control the way of kicking
pCPU.
Tracked-On: #8207
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The design of ACRN CPU performance management is to let hardware
do the autonomous frequency selection(or set to a fixed value),
and remove guest's ability to control CPU frequency.
This patch is to remove guest's ability to control CPU frequency by
removing the guests' HWP/EIST CPUIDs and blocking the related MSR
accesses. Including:
- Remove CPUID.06H:EAX[7..11] (HWP)
- Remove CPUID.01H:ECX[7] (EIST)
- Inject #GP(0) upon accesses to MSR_IA32_PM_ENABLE,
MSR_IA32_HWP_CAPABILITIES, MSR_IA32_HWP_REQUEST,
MSR_IA32_HWP_STATUS, MSR_IA32_HWP_INTERRUPT,
MSR_IA32_HWP_REQUEST_PKG
- Emulate MSR_IA32_PERF_CTL. Value written to MSR_IA32_PERF_CTL
is just stored for reading. This is like how the native
environment would behavior when EIST is disabled from BIOS.
- Emulate MSR_IA32_PERF_STATUS by filling it with base frequency
state. This is consistent with Windows, which displays current
frequency as base frequency when running in VM.
- Hide the IA32_MISC_ENABLE bit 16 (EIST enable) from guests.
This bit is dependent to CPUID.01H:ECX[7] according to SDM.
- Remove CPID.06H:ECX[0] (hardware coordination feedback)
- Inject #GP(0) upon accesses to IA32_MPERF, IA32_APERF
Also DM do not need to generate _PSS/_PPC for post-launched VMs
anymore. This is done by letting hypercall HC_PM_GET_CPU_STATE sub
command ACRN_PMCMD_GET_PX_CNT and ACRN_PMCMD_GET_PX_DATA return (-1).
Tracked-On: #8168
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
HPET is used to calibrate the tsc frequency if system fails to
get the accurate frequency from CPUID 0x15. But on some platforms
(for example: the emulated ACRN on QEMU) HPET is not started
by default, which causes the failure of calibration TSC by HPET.
Tracked-On: #8113
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In order to improve DX, 'DISABLED' style configurator settings are
changed to 'ENABLED' style. The meaning of the MACROs are reversed,
so in the hv code we have to change '#ifndef' -> '#ifdef' or
'#ifdef' -> '#ifndef'.
Including:
- MCE_ON_PSC_DISABLED -> MCE_ON_PSC_ENABLED
- ENFORCE_TURNOFF_AC -> SPLIT_LOCK_DETECTION_ENABLED
- ENFORCE_TURNOFF_GP -> UC_LOCK_DETECTION_ENABLED
Tracked-On: #7661
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
1. make memcpy_erms as a public API; add a new one
memcpy_erms_backwards, which supports to copy data from tail to head.
2. improve to use right/left/home/end key to move cursor, and support
delete/backspace key to modify current input command.
Tracked-On: #7931
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
