this patch moves function xx_offset and xx_index to common code,
Add arch interface arch_quirk/arch_pgtle_page_vaddr and
arch_pgtle_large.
Tracked-On: #8831
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Liu, Yifan1 <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
move _page_table_level to common, and rename functions and
variables to comform with pgtln style
when we refer to pgtl0e, it means the lowest translation
table entry, while the "pte" refers generic page table entry.
Tracked-On: #8831
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
add x86 mm_common.h to map common macro name to x86 name
and chang them in common/mmu.c, replace XX_PFN_MASK with
PFN_MASK, since they are the same.
Tracked-On: #8831
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Liu, Yifan1 <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The sanitized page is used to mitigate l1tf for x86, but sanitized_page_hpa
is the hpa used to set in the page table entry when delete or modify
page happens, it is by default is 0, other arch donot need to init it.
move this part to common for other arch to reuse it.
Tracked-On: #8831
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Liu, Yifan1 <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
move struct pgtable and page_pool to common code and
move alloc_page/free_page/init_page_pool to common
Tracked-On: #8831
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Liu, Yifan1 <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
move some funcitons like hpa2hva to common file.
change some files to include file from asm/pgtable.h to common/pgtable.h
Tracked-On: #8831
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
For now, BOARD should use the qemu-riscv for risc-v.
For RISC-V:
make hypervisor BOARD=qemu-riscv SCENARIO=shared ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu-
For x86:
make hypervisor BOARD=qemu SCENARIO=shared [ARCH=x86]
Tracked-On: #8805
Signed-off-by: Fei Li <fei1.li@intel.com>
Only x86 has local APIC pass-thru. For release mode, the console_vmexit_callback
is empty, complier should optimize this unuseful check.
Tracked-On: #8805
Signed-off-by: Fei Li <fei1.li@intel.com>
get_vm_from_vmid,is_paused_vm and is_poweroff_vm should be common APIs.
But now doesn't implement them as common for not introduce more VM related
data structure and APIs.
Tracked-On: #8805
Signed-off-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
MMIO read/write without memory order should be common ARCH, without
PIO support shouldn't use PIO APIs, so implement them as empty.
Tracked-On: #8807
Signed-off-by: Fei Li <fei1.li@intel.com>
Signed-off-by: Haoyu Tang <haoyu.tang@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
cpu_dead calls arch_cpu_dead, cpu_do_idle calls arch_cpu_do_idle,
arch_cpu_dead and arch_cpu_do_idle are required to be implemented by
each architecture.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
stack_frame is not only for vcpu thread, host thread needs
it, so move stack_frame out of vcpu file.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
delivery mode and idle mode are x86 specific percpu, so move it from common to
x86 arch, also change the name of mode_to_idle to be idle_mode, change the name
of mode_to_kick_pcpu to be kick_pcpu_mode.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
add arch_send_reschedule_request, which is called by make_reschedule_request, for X86
arch_send_reschedule_request will call kick_pcpu, arch_send_reschedule_request is arch
public API, which is needed to be implemented by each architecture.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Convert IRQ-related macros to static inline functions and introduce
wrappers for arch-specific implementations. This follows the style we
defined for multi-arch development.
This is a follow-up update for commit
a7239d126 ("[FIXME] hv: risc-v add denpended implementation in cpu.h").
CPU_IRQ_ENABLE_ON_CONFIG -> local_irq_enable
CPU_IRQ_DISABLE_ON_CONFIG -> local_irq_disable
CPU_INT_ALL_DISABLE -> local_irq_save
CPU_INT_ALL_RESTORE -> local_irq_restore
Tracked-On: #8813
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Enable acrnlog (memory logging) in release builds, default log level
is still controlled by DEBUG_OPTIONS/MEM_LOGLEVEL in scenario file.
Tracked-On: #8805
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
The following pcpu related interfaces are moved into common:
- common/cpu.c::start_pcpus
- include/common/cpu.h::get_pcpu_id
- include/common/cpu.h::set_current_pcpu_id
Their arch specific implementations are moved into arch/$(ARCH):
- arch/$(ARCH)/cpu.c::arch_start_pcpu
- include/arch/$(ARCH)/asm/cpu.h::arch_get_pcpu_id
- include/arch/$(ARCH)/asm/cpu.h::arch_set_current_pcpu_id
The following interface is moved into common:
- pcpu_set_current_state (from arch/x86/cpu.c -> common/cpu.c)
The following MACROs are moved into include/common/cpu.h:
- CPU_UP_TIMEOUT
- CPU_DOWN_TIMEOUT
- BSP_CPU_ID
- INVALID_CPU_ID
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Extract common interface to include/lib/bits.h, and invoke the variant
implementation of arch.
Re-implement unlocked functions as C in common library.
Rename bitmap*lock() to bitmap*(), bitmap*nolock() to bitmap*non_atomic().
Tracked-On: #8803
Signed-off-by: Haoyu Tang <haoyu.tang@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Extract common interface to include/lib/spinlock.h, and invoke the
variant implementation of arch.
Refine assemble macro code in case that ASSEMBLER defined.
Tracked-On: #8803
Signed-off-by: Haoyu Tang <haoyu.tang@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Move phys_cpu_num and pcpu_active_bitmap to common, which could be
only accessed by interfaces provided by smp.h.
v2->v3:
1. move ALL_CPUS_MASK/AP_MASK to common cpu.h
v1->v2:
1. preserve phys_cpu_num in x86 but implement arch_get_num_available_cpus()
to provide interface for common code to access.
2. change function name test_xx to check_xx
Tracked-On: #8801
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Reviewed-by: Liu, Yifan1 <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Move x86 architecture dependent per cpu data into a
seperate structure and embeded it in per_cpu_region.
caller could access architecture dependent member by
using prefix 'arch.'.
v2->v3:
move whose_iwkey, profiling_info and tsc_suspend to x86
v1->v2:
rebased on latest repo
Tracked-On: #8801
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Reviewed-by: Liu, Yifan1 <yifan1.liu@intel.com>
Reviewed-by: Chen, Jian Jun<jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Since there is no common IPI abstraction, the arch_ prefix is redundant.
This patch renames the functions as follows:
- arch_send_dest_ipi_mask -> send_dest_ipi_mask
- arch_send_single_ipi -> send_single_ipi
Tracked-On: #8799
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
For arch specific codes, we use arch_xxx() to name the function.
So, rename cpu_ticks/cpu_tickrate/set_hw_timeout/init_hw_timer
to follow this convention. Then, use arch interface to set timeout
value in update_physical_timer().
Furthermore, remove hw_timer.h and move its contents into common/
timer.h.
Tracked-On: #8792
Signed-off-by: Yi Y Sun <yi.y.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch:
- abstracts the common logic from existing x86 implementation
- moves x86-specific logic to arch/x86/notify.c
A new common/notify.{c,h} is introduced to provide a common SMP call framework for
multi-arch support in ACRN.
arch-specific files such as arch/{x86,riscv}/notify.c is aim to provide the
corresponding implementations respectively.
The framework provides the following common APIs:
- init_smp_call(): initialize the SMP call support during pCPU initialization
- handle_smp_call(): execute the SMP call notification handler
- smp_call_function(): trigger the SMP call request to target pCPUs
Other SW modules should invoke these common APIs to perform arch-independent
SMP operations.
Two arch-specific hooks are abstracted:
- arch_smp_call_kick_pcpu():
- On x86, special handling is required when LAPIC is passthrough.
- On RISC-V, a plain IPI is sufficient to kick the target pCPU.
- arch_init_smp_call():
- On x86, CPU initialization reserves dedicated vectors and
registers callback handlers for purposes such as notifications
or posted interrupts.
- On RISC-V, no special handling is required at present; this
can be extended in the future if needed.
----------
Changelog:
* Merged the following two patches into one:
[RFC PATCH v2 4/7] hv: introduce common/smp.{c,h}
[RFC PATCH v2 5/7] hv: smpcall: x86: adapt to common SMP call
Tracked-On: #8786
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Rename send_single_ipi() and send_dest_ipi_mask() to
arch_send_single_ipi() and arch_send_dest_ipi_mask() in x86, to make the
naming consistent with the RISC-V implementation and reflect that these
functions are arch-specific.
Tracked-On: #8786
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Align the prototype of send_dest_ipi_mask() on x86 with the RISC-V
definition. dest_mask is updated from uint32_t to uint64_t:
From: void send_dest_ipi_mask(uint32_t dest_mask, uint32_t vector)
To: void send_dest_ipi_mask(uint64_t dest_mask, uint32_t vector)
On RISC-V, send_dest_ipi_mask() is implemented using SBI interfaces,
where the dest_mask is defined as "unsigned long" in the SBI spec.
Tracked-On: #8786
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Currently ACRN supports only x86 architecture. And this patch is the
first of a series of patches to enable ACRN on multiple architecture.
This commit does the multi-arch of Makefile: put x86 specific content
into arch/x86/Makefile.
This includes:
- Pre-launched VM ACPI binary generation
- acrn.32.out generation (32 bit ELF was generated towards i386
architecture)
- Customized modularization (*_MOD). Only one module is created in
common section: COMMON_MOD
- Architecture specific make targets and pre-build actions are moved to
architecture specific makefile. Introduce the following variable to
register arch targets and/or actions:
- ARCH_PRE_BUILD_TARGETS
- ARCH_ALL_TARGETS
- ARCH_INSTALL_TARGETS
Tracked-On: #8782
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Mark hypervisor memory region as unusable in its e820 table to avoid
being overlapped by e820_alloc_memory(). As it is already filtered out
in hypervisor e820 table, there is no longer need to filter it out in
service VM e820.
Tracked-On: #8738
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
The hypervisor image size is determined at link time, but now it is
calculated and stored in a global variable during mmu initialization,
and the helper function reads from that variable. Change to calculate
it inside helper function to avoid inconsistency.
Tracked-On: #8738
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
The VM-exit instruction length(VMX_EXIT_INSTR_LEN) in VMCS is undefined
on EPT violation, except during delivery of a software interrupt,
privileged software exception, or software exception[1]. Although CPU
is likely to set the field, it can be incorrect in certain cases, such
as cmp+jcc and test+jcc.
Since hypervisor does not know exactly how much bytes needed, and GVA
translation is costly, it first copies at most 15 (VIE_INST_SIZE) bytes
within the page, then decodes the instruction. If more bytes are needed
during decoding and copied length is less than 15, it copies remaining
bytes.
[1] 29.2.5, https://cdrdv2-public.intel.com/671200/325462-sdm-vol-1-2abcd-3abcd.pdf
Tracked-On: #8756
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
The Access Size field in ACPI GAS was not introduced before ACPI 2.0,
Errata C. It is not guaranteed to be a non zero value, like QEMU
programs it to 0. As it only indicates how many bytes it can be
accessed at once, the register size should be determined by Bit Width
and Bit Offset. In IO space, Bit Offset is always 0, the size is
(Bit Width / 8).
Tracked-On: #8771
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@intel.com>
Reviewed-by: Li Fei <fei1.li@intel.com>
In current code process, hyperv data in struct vm_arch is never cleared
during VM shutdown and is retained to next VM launch. As the enabled
bit of hypercall_page msr is not clear, hypercall page might cause fatal
error such as Windows VM BSOD during VM restart and memory
remapping. Hyperv page destory function can ensure hyperv page is
destory during each VM shutdown so hyperv related config such as
hypercall page is established correctly during each VM launch.
Tracked-On: #8755
Signed-off-by: Yichong Tang <yichong.tang@intel.com>
Add reset_control in acrn_vm. Use this reset_control to simulate
RESET_CONTROL(0xCF9) register in hypervisor.
Tracked-On: #8724
Signed-off-by: Yuan Lu <yuan.y.lu@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Service VM may write 0x6 to port 0xcf9 to trigger a warm reset, but
current hypervisor always performs a cold reset by writing 0xE to CF9.
Hypervisor should reboot the system in the same mode as Service VM
specified. Specific OS features (like linux pstore) requires warm
reset to keep data across reboot.
The behavior of hv console's reboot command (cold reset) remains
unchanged.
Tracked-On: #8539
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Per SDM, VPDPBUSD/VPDPBUSDS/VPDPWSSD/VPDPWSSDS instructions depend on
CPUID Feature Flag 'AVX-VNNI, AVX512_VNNI, AVX512VL'. 'AVX512_VNNI' and
'AVX512VL' are already exposed to any VM.
'AVX-VNNI' is in CPUID.(EAX=07H,ECX=1):EAX.AVX-VNNI[bit 4]. This patch
is to expose all the CPUID.EAX=07H subleaf features to VMs.
Mask corresponding bits if want to disable some features in the future.
Tracked-On: #8710
Reviewed-by: Fei Li <fei1.li@intel.com>
Signed-off-by: Haiwei Li <haiwei.li@intel.com>
Remove unreachable code branch in line 163:
if CR0 enabled WP, supervisor-mode writing a read-only page have
been checked in line 109.
Merge redundant checking:
if smap is enabled, supervisor-mode can't access user-mode address
when eflags.ac disabled.
Tracked-On: #8708
Signed-off-by: Haoyu Tang <haoyu.tang@intel.com>
Some hypercalls return -ENODEV which should be set into RAX as return
value, e.g. HC_ASSIGN_PCIDEV. So, remove the check in
vmcall_vmexit_handler() and change return value to -EACCESS if the
hypercall is not sent from Service VM or allowed VM.
Tracked-On: #8598
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
This patch fixes the following testability issues identified by the dynamic
module test.
Global variables defined in function scope cannot be referenced outside
the function, making it impossible to check the return value of these
functions.
Tracked-On: #861
Signed-off-by: Chen, Jinshi <jinshi.chen@intel.com>
Guest VM, such as Linux, may read RESET_CONTROL(0xCF9) register
before writing to, in this case, ACRN should not always return
dummy value.
Tracked-On: #8688
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
GAI Tooling Notice: These contents may have been developed with support from one
or more generative artificial intelligence solutions.
ACRN hypervisor is decomposed into a series of components and modules. The
module design in hypervisor is to add inline doxygen style comments above
functions, macros, structures, etc.
This patch is to add comments for some elements in hwmgmt_page module.
Tracked-On: #8665
Signed-off-by: Haiwei Li <haiwei.li@intel.com>
GUEST_FLAG_STATELESS indicates guest is running a stateless operating
system and need to be shutdown forcefully without data loss. This flag
is only appalicable to pre-launched VM. For TEE_VM, this flag will be
set implicitly.
Tracked-On: #8671
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Now multiboot modules memory is already reserved from e820 in function
`alloc_mods_memory()` and Service VM will not corrupt pre-launched VM
modules.
So remove the code of Service VM delayed loading.
Tracked-On: #8652
Signed-off-by: Haiwei Li <haiwei.li@intel.com>
