FPU/SSE is not supported in HV. Otherwise it is possible that the
SSE/FPU register is used under -O2 option.
So the gcc option is added to disable them.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now two flags can be used to control the optimizatin option. So unify them
and only one flag can be used to config the optimization
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now one uint64_t type is used to obtain the corresponding descriptor_table
for GDT/IDT. This will cause the stack protect corruption under -O2.
So the descriptor_table struct is added to configure the GDT/IDT of VMCS.
V1->V2: Move the descriptor_table into vmx.h header file
And its type is renamed from dt_addr_t to descriptor_table.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The RFLAGS will be touched in some inline assembly.(exec_vmxon/
RFLAGS_RESTORE). The "cc" constraint should be added. Otherwise
it won't be handled under -O2 option.
And "%%XXX" register should also be added into constraints.
Otherwise it will be optimized incorrectly.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add vlapic_create_timer/vlapic_reset_timer to setup/reset a timer.
Add vlapic_update_lvtt to disarm timer when mode changes.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Using __func__ instead of function string name.
Using tab instead of more whitespace.
Using macro instead of numeric constants.
Remove unnecessary function declaration.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
These code is useless since it just pseudocode. Current it doesn't
support vlapic one-shot/periodic timer.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
make the timer list be ordered to speed up expried timer
process and next timer event finding.
Add timer would not schedule timer unless it's the next
timer event.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Update the "Contributing Guidelines" document to point at the
top-level LICENSE file that was created after the merger of
the three acrn-{hypervisor,devicemodel,documentation} repositories
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The tools directory is moved out of ./devicemodle, to be in parallel with
hypervisor, devicemodel and doc.
Signed-off-by: Yan, Like <like.yan@intel.com>
Post-merge, the doc building instructions need an update to reflect the
new diretory structure.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Documentation updates were needed to account for changes caused by the
recent merging of the three acrn-hypervisor, acrn-devicemodel, and
acrn-documentation repos.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The name of acrn_register is too generic, rename to acpi_generic_address
which is more common.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
V2->V3: Updated variable name: trampoline_code_paddr
V1->V2: changed variable name: init_ap_code_addr
These page tablea are sitting right after the trampoline code, so adjust it according to
the actual loaded address for trampoline code
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
V3->V4: Updated function/variable names for accurancy
V2->V3: Changed a few function/variable names to make it less confusing
V1->V2: removed the unneccesary cache flushing
- For UEFI boot, allocate memory for trampoline code in ACRN EFI,
and pass the pointer to HV through efi_ctx
- For other boot, scan E820 to allocate memory in HV run time
- update_trampoline_code_refs() updates all the references that need the
absolute PA with the actual load address
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
V2->V3: Fixed the booting issue on MRB board and removed the restriction
of allocate memory from address 0
1) Fix the booting from MRB issue
-#define CONFIG_LOW_RAM_SIZE 0x000CF000
+#define CONFIG_LOW_RAM_SIZE 0x00010000
2) changed e820_alloc_low_memory() to handle corner case of unaligned e820 entries
and enable it to allocate memory at address 0
+ a length = end > start ? (end - start) : 0;
- /* We don't want the first page */
- if ((length == size) && (start == 0))
- continue;
3) changed emalloc_for_low_mem() to enable to allocate memory at address 0
- /* We don't want the first page */
- if (start == 0)
- start = EFI_PAGE_SIZE;
V1->V2: moved e820_alloc_low_memory() to guest.c and added the logic to
handle unaligned E820 entries
emalloc_for_low_mem() is used if CONFIG_EFI_STUB is defined.
e820_alloc_low_memory() is used for other cases
In either case, the allocated memory will be marked with E820_TYPE_RESERVED
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
V1->V2: removed CONFIG_LOW_RAM_START and added ".org 0" to
cpu_secondary.S
The assumption is trampoline code is relocated while HV is not, so:
trampoline code is built at address 0, and CS register is updated
by SIPI to reflect the correct vector
in real mode part, added extra pointers for page tables and long jump buffer
so it's possible for HV code to patch the relocation offset
in long mode part, use absolute addressing when referring HV symbols,
and use relative addressing for symbols within trampoline code
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
The current dm, all non-pci and non-acpi related files are put into
hw/platform directory. This is actually disturbed the meaning of
*platform*. The platform devices are mean of board and SoC specific
non-PCI devices, like usb devices, etc.
This patch refines the ACRN dm directory architecture.
For some common device logic files, likes block_if.c/uart_core.c or
usb_core.c. They will move to hw/ directly.
For platform architecture depended files, create arch/ under root dir.
And create sub-dir arch/x86 for x86 architecture, will create more
architectures in future. The pm.c will move to this new dir.
The hw/acpi will be moved to hw/platform/acpi due to acpi also be
considered as part of platform.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Currently config_page_table_attr() treats MMU_MEM_ATTR_READ exactly as
MMU_MEM_ATTR_BIT_READ_WRITE for PTT_HOST, so even when MMU_MEM_ATTR_WRITE
is not used, the R/W bit in PTE is still being set
Signed-off-by: Zide Chen <zide.chen@intel.com>
The name of acrn_register is too generic, rename to acpi_generic_address
which is more common.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
We've enabled GitHub issues for submitting and tracking bug and
enhancement requests for the project. Add some documentation about how
to use issues and what to expect.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
With curren code, DM will ignore the SIGHUP signal generated from
SOS reboot that causes DM will not release resource when SOS reboot
occurs.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Right now, the virtio_heci_proc_rx only process the first
available client at a time, then clear rx_need_sched flag to make
rx_thread sleep. It cause the remain data available clients lost the
current change to be processed. This patch resolves this issue, to
process all data available clients in a round prior to push rx_thread
enter sleep.
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With rare probability, the two threads may try to get&put client
together. For client getting, the subsequent thread will get one
destroyed client. For client putting, it will cause acrn-dm get crashed
due to assert be triggered in virtio_heci_client_put.
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The original code assume there is only one configuration for
virtio-blk, and 'b' is just located after that configuration,
so to get the value of 'b', it will end char *config by adding
'\0' after the first configuration.
Thus, char *config will change from:
/XXXX_vdisk_file,range=xxx/xxx
to:
/XXXX_vdisk_file
and char *b will point to:
range=xxx/xxx
So, the range will never take effect for virtio-blk.
Now, 'b' is designed to located just after emul, and
char *config will point to all configurations after 'b'.
Note: only ",b," is taken for boot device option.
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
All related resources are freed in virtio_input_deinit.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The implementation of virtio_input_get_config is based on ioctl of
evdev fd. The following properties of input device are got by ioctl
to service configuation request from FE driver:
- name and devids
- propbit
- evbit: keybit/relbit/absbit/mscbit/swbit
- absbit
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Input events are read from host evdev fd and cached into a local queue.
When SYN_REPORT is read, the cached input events are sent to guest via
EVENT virtqueue. Guest input events are read from STATUS virtqueue then
written to host evdev fd.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the callbacks required by virtio_input_ops:
reset/cfgread/cfgwrite/apply_features/set_status.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The following are done in virtio_input_init:
- parse the command line to get the path of host evdev
- parse the command line to get the optional serial string
- calloc struct virtio_input and initialize it
- call virtio framework APIs to initialize virtio PCI
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds the data structures and macros used to implement
virtio-input.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- According to Intel SDM 24.9.2,Vol3, should check the
validity of "VM-exit interruption information" before
extracting the vector of interrupt.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
- rename it to 'io_shared_page' to keep consistent
with ACRN HDL foils.
- update related code that reference this data structure.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
This patch makes the Service OS bootloader configurable by passing
a command-line argument to 'acrn.efi' when setting up the EFI
bootloader using, e.g., 'efibootmgr'. If no argument is passed, the
default bootloader used is: "\EFI\org.clearlinux\bootloaderx64.efi".
This is the default bootloader/setting used by Clearlinux and is set
in the bsp/uefi/include/bsp/bsp_cfg.h file (via the
CONFIG_UEFI_OS_LOADER_NAME define)
The general format of the argument is: "bootloader=<\path\to\bootloader>".
As a concrete example, imagine the following set-up:
* You have installed the Service OS (bare-metal for now)
* Bootloader is "\EFI\org.clearlinux\bootloaderx64.efi"
* Boot device is '/dev/sda'
* EFI System Partition (ESP) is '1'
* You put the ACRN hypervisor under "\EFI\acrn\"
To change the default boot entry to boot the ACRN hypervisor, enter:
# efibootmgr -c -l "\EFI\acrn\acrn.efi" -d /dev/sda -p 1 \
-L "ACRN Hypervisor" -u "bootloader=\EFI\org.clearlinux\bootloaderx64.efi"
And reboot your machine.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Fix some formatting problems with a recent GSG update. Tweak the
custom CSS to adjust code block (and code literal) colors. Update
Makefile to document doc build options for pulling source from the other
repos and for publishing targets.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The boot process has changed a bit and the ACRN hypervisor is now
directly loaded by the platform EFI firmware. This commit reflects
those changes and also reference a newer version of Clearlinux that
includes the ACRN hypervisor that has these changes in.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
