While running in a nested environment, such as qemu, parse the board
information should be allowed even it is not in a native environment.
Replace the error with warning message and does not exit the program.
Tracked-On: #6208
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Enlarge the max size to store the PTCT/RTCT table to 1k bytes
because the size of RTCT table exceeded the original max size
0x1100 - 0xF00 which makes RTCT table overlap other ACPI tables.
Tracked-On: #6303
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
1. Update the vaule of the tag CLOS_MASK to 0xfffff according to board.xml
in all scenario xml files.
2. Replace industry_launch_2uos.xml launch file with industry_launch_6uos.xml.
3. Update logical_partition.xml file.
4. Remove hybrid_rt.xml file, then add a second POST_STD_VM in hybrid.xml and
add hybrid_launch_2uos.xml launch file correspondingly.
Tracked-On: #6244
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Add the MSI-X capability structure nodes under <capability
id="MSI-X"> in board.xml.
Example:
<capability id="MSI-X">
<table_size>16</table_size>
<table_bir>1</table_bir>
<table_offset>0x1000000</table_offset>
<pba_bir>1</pba_bir>
<pba_offset>0x0</pba_offset>
</capability>
Fix the MSI <count> nodes when there is only one vector.
Tracked-On: #6235
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
The PR 6236 has modified the board.xml format for MAX_MSIX_TABLE_NUM fix.
To compromise this PR, updates all the source file board.xmls.
Tracked-On: #6235
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
IC_ASSIGN_MMIODEV -> ACRN_IOCTL_ASSIGN_MMIODEV
IC_DEASSIGN_MMIODEV -> ACRN_IOCTL_DEASSIGN_MMIODEV
struct acrn_mmiodev has slight change. Move struct acrn_mmiodev into
acrn_common.h because it is used by both DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
vmm.h has some unused definitions.
Keep the useful definitions and delete vmm.h
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
In launch script, update cpu offline method to fix the issue
that it isn't offline cpu on ADL-S board.
Tracked-On: #6266
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
This patch sets the MemoryOverwriteRequestControl (MORCtrl for short)
EFI variable before jumping to hypervisor.
Setting variable MemoryOverwriteRequestControlLock (MORCtrlLock for
short) can also be enabled by manually adding -DMORCTRL_LOCK_ENABLED to
CFLAGS.
Setting MORCtrl indicates to the platform firmware that memory be
cleared upon system reset. Setting MORCtrlLock for the first time will
render both MORCtrl and MORCtrlLock to read-only, until next reset.
Tracked-On: #6241
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
This patch implements the container_load_modules function.
This function loads multiboot modules following multiboot protocol.
Tracked-On: #6241
Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
This patch implements the container_load_boot_image function.
This function loads boot image following multiboot protocol.
Tracked-On: #6241
Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Previous patches introduces an abstract struct HV_LOADER to do two
things: load boot image and load boot modules. This patch provides an
implementation barebone of container. The implementation of critical
functions container_load_boot_image and container_load_modules will come
in coming patches.
Tracked-On: #6241
Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
This patch adds a file containing some helper functions to load
or validate ELF32 images.
Tracked-On: #6241
Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
This patch adds a file containing some helper functions to search or parse
multiboot headers.
Tracked-On: #6241
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
This patch adds code to prepare multiboot2 info passed to hypervisor.
Currently we prepare only the following information to hypervisor:
Boot command line
Boot loader name
Modules
Memory Map
ACPI table
EFI64 system table
EFI memory map
Tracked-On: #6241
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
ACRN EFI application based on the legacy efi-stub code provides booting method
of HV on UEFI-BIOS without using the GRUB Bootloader. It is supposed to be used
for secure booting on certain platform. By means of that users can boot HV,
Service VM kernel, pre-launched VM kernel and its ACPI table binary packed in
the Slim Bootloader container boot image file format. ACRN EFI application has
additional dependencies to compile which are not listed in the existing ACRN GSG
doc. Since this is an optional feature but not all users need, it does not get
compiled by default to avoid causing any confusion for existing users. README
for how to use the feature will come later in a separated commit.
This patch adds barebone implementation of this efi-stub. The following
files are reused from a previous version of efi-stub without changes:
efilinux.h, pe.c, stdlib.h
Other files contains stubbed functions, whose implementation will come
in coming patches.
Tracked-On: #6241
Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Co-developed-by: Yifan Liu <yifan1.liu@intel.com>
1. Update the necessary libraries to consistent with the "Build ACRN From Source"
document in the "Getting Started Guide" document.
2. Delete the related introduction with acrngt.conf and launch_uos_id1.sh files in
"Getting Started Guide" document.
3. Update WHL-IPC-I7 board's processor in Supported HW document.
4. Add cpu_affinity element's description in ACRN Configuration Data.
5. Update the description for shm_region in Launch XML format.
6. Update configurable/readonly attributes values.
7. Update the description for hv.CAPACITIES.MAX_MSIX_TABLE_NUM in schema/config.xsd.
Tracked-On: #5692
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
1. Update the value of the tag MAX_MSIX_TABLE_NUM from 64 to empty
for all scenario xml except ehl-crb-b board.
2. Update the value of the tag MAX_MSIX_TABLE_NUM to 96 for the
scenario xml on the ehl-crb-b board.
Tracked-On: #6186
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Update the value of the tag MAX_PT_IRQ_ENTRIES from 64 to 128
in TGL-RVP scenario xml.
Tracked-On: #6185
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
A vmsix supported passthrough device expects the first unused bar region
for vmsix. Pop the first unused_bar_index in gpa.py instead.
Reference code: init_vmsix_on_msi of hypervisor\dm\vpci\vmsix_on_msi.c
Tracked-On: #6192
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Without this, the GUEST_FLAG_NVMX_ENABLED doesn't show up in the
drop-down list of "guest_flags" in the ACRN config GUI.
Tracked-On: #5923
Signed-off-by: Zide Chen <zide.chen@intel.com>
Update the content about getting board xml from native
enviroment in acrn_configuration_tool.rst and README.
Tracked-On: #6134
Signed-off-by: Kunhui Li <kunhuix.li@intel.com>
Refine get_pt_intx_table. The method parse the <pt_inx> of scenario and
append the pair of phys_gsi and virt_gsi if there is any.
Refine check_pt_intx. Add a condition that the method returns if the
phys_gsi and virt_gsi are empty dictionary.
Tracked-On: #6178
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Add flag "allow_trigger_s5" to launch script xmls. If this flag sets to
'y' and the poweroff_channel sets to "vuart1(pty)" or "vuart1(tty)", the
"allow_trigger_s5" will appends to the end of "--pm_notify_channel
uart".
Tracked-On: #6138
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Make up qemu.xml to compromise the static allocators which use the
new xpath based on board inspector.
Tracked-On: #6102
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
For illegal characters, replace original characters with escaped characters in board.xml.
Tracked-On: #6113
Signed-off-by: Kunhui Li <kunhuix.li@intel.com>
Modify the initial value of PT_SLOT variable and
update the get slot logic that all device call the virtual_dev_slot function to get slot number directly.
Copy the launch_uos_id1.sh to launch_win.sh.
Tracked-On: #6072
Signed-off-by: Kunhui Li <kunhuix.li@intel.com>
Update the severity from "warning" to "error" for hybrid cores check.
Tracked-On: #5918
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Signed-off-by: Kunhui Li <kunhuix.li@intel.com>
Retrieve physical APIC IDs from board xml file and use them to fill in the ACPI MADT table
for pre-Launched VMs.
Note that the config-tool will throw an error if the processors/die/core/thread tags are absent.
User needs to run board_inspector.py to regenerate the board xml file when this commit is merged,
if the processors/die/core/thread tags are missing in the board xml file.
Tracked-On: #6020
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
commit 873ed75 ("misc: sanity check VM config for nested virtualization")
requires that the guest_flag tag can't be empty, or it will fail to build.
This patch changes adl instances of "<guest_flag></guest_flag>" to
"<guest_flag>0</guest_flag>".
Tracked-On: #5923
Signed-off-by: Jiang, Yanting <yanting.jiang@intel.com>
Configure PTM in post-launched VM using <PTM> element. If the //vm/PTM
sets to 'y', pci_dev.c.xsl appends the virtual root port to
corresponding struct acrn_vm_pci_dev_config of that VM. Currently it
supports only post-launched VMs.
Configure enable_ptm for dm argument. If a uos/enable_ptm with uos id
= 'vm_id 'sets to 'y' and the vm/PTM with the same vm_id sets to 'y',
append an "enable_ptm" flag to the end of passthrough ethernet devices.
Currently there is only ethernet card can support the "enable_ptm"flag.
For the schema validation, the <PTM> can only be ['y', 'n'].
For the launched script validation, the <enable_ptm> can only be ['y',
'n']. If the <enable_ptm> sets to 'y' but the corresponding <PTM> sets
to 'n', the launch script will fail to generate.
Tracked-On: #6054
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Add an xslt file "board_info.h.xsl". This file is used to
generate board_info.h which is used by hypervisor.
Tracked-On: #6024
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add an xslt file "pci_dev.c.xsl". This file is used to
generate pci_dev.c which is used by hypervisor.
Tracked-On: #6024
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
acrn:get-vbdf: get the virtual bdf from allocation.xml based on vmid and device name
acrn:get-pbdf: get physical bdf from <pci_dev>
acrn:ptdev-name-suffix: fix the name to look up allocation.xml
acrn:get-hidden-device-num: get the number of hidden devices based on
board name
acrn:is-vmsix-supported-device: check if a device is a vmsix supported
device based on the vendor and identifier
Tracked-On: #6024
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Assign bdf to pci emulated and passthrough devices.
For pre-launched VM, assigns unique bdf to passthrough devices, inter-vm
shared memory, pci vuart(console and communication vuarts).
For SOS vm, assigns unique bdf to inter-vm shared memory and pci
vuart(console and communication vuarts).
The bdf follows the rules below:
- the bdf 00:00.0 is reserved for pci hostbridge
- the assigned bdf range: bus is 0x00, dev is in range [0x1, 0x20)
and the fuc is 0x00
- the bdf must be unique, which means any vm's emulated devices cannot
share the same bdf with existing devices
- some devices's bdf is hardcoded, modify its bdf would leads the
device cannot be dicoverd by os. A HARDCODED_BDF_LIST in bdf.py documents
them
- the passthrough devices' bdf can be reused in SOS vm
Tracked-On: #6024
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add methods allocates the mmio bar base to console vuart,
communication vuarts, inter-vm shared memory and passthrough pci
devices.
For SOS:
- get low mem by parsing board xml.
- get high mem by parsing board xml, if the high mem is not enabled,
the high mem start address would be ~0UL and the end address is 0UL
- get the occupied mmio windows by parsing board.xml
- for each console vuart, communication vuart and inter-vm shared memory
devices, assign unused mmio windows to them
- all the assigned mmio windows must be unique and should not overlay
with any devices' mmio window
- the passthrough devices mmio windows can be reused in SOS vm
- each allocated mmio start address must be 4k alignment if the length
of bar is smaller than 4k
- each allocated mmio start address must be aligned with the bar length
if its length is greater than 4k
- the 32bits bar will fall in low mem range only
- 64bits bar will look for free mmio in low mem rage first, if the high
mem is enabled, the 64bits bar will look for free mmio in high mem
range if there is not enough space in low mem range
- allocator raises an error if there is not enough mmio space
For pre-launched VM:
- the high mem range is [256G, 512G)
- the low mem range is [2G, 3.5G)
- there is no used mmio window initially
- for each console vuart, communication vuart, inter-vm shared memory
devices and passthrough devices, assign unused mmio windows to them
- all the assigned mmio windows must be unique and should not overlay
with any devices' mmio window
- the 32bits bar will fall in low mem range only
- 64bits bar will look for free mmio in low mem rage first and then
look for free mmio in high mem range if there is not enough space in
low mem range
- each allocated mmio start address must be 4k alignment if the length
of bar is smaller than 4k
- each allocated mmio start address must be aligned with the bar length
if its lenght is greater than 4k
- allocator raises an error if there is not enough mmio space
Tracked-On: #6024
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
