The term PSRAM is now obsoleted and should be replaced with SSRAM, as has been
done by commit 9facbb43b3 ("config-tool: rename PSRAM to SSRAM"). However,
there are two places in the configuration toolset that still uses PSRAM. This
patch updates these missed occurrences accordingly.
Tracked-On: #6012
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
There could be multiple ways in the scenario configuration to specify that
no INTx allocation is explicitly allocation to a prelaunched VM:
* Do not have a `pt_intx` node at all.
* Have a `pt_intx` node with no text.
* Have a `pt_intx` node with a text that has nothing but whitespaces,
tabs and newlines.
The current implementation only supports the first way, and will cause
build-time failures when a scenario configuration uses the latter two. The
following changes are introduced by this patch to fix such errors.
* The INTx static allocator queries the text() of `pt_intx` nodes
directly to gracefully handle `pt_intx` nodes with no text.
* The XSLT of pt_intx.c clears all kinds of white spaces from the text of
`pt_intx` nodes before calculating the set of allocated INTx mappings.
Tracked-On: #6287
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
If passthrough TPM2 is enabled and the log area is present, allocates
the log_area_start_address with the size log_area_minimum_length(256K).
Tracked-On: #6320
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
This patch allocates interrupt lines among VMs according to the PCI devices
assigned to them.
v1 -> v2:
* Remove the usage of VMx_PT_INTX_NUM macro in vm_configuration.c; use the
concrete numbers directly.
* The static allocator will also complain if any interrupt line is allocated to
a VM with LAPIC_PASSTHROUGH.
v2 -> v3:
* Fix a minor coding style issue.
Tracked-On: #6287
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
It is a common practice to parse PCI BDF in the static allocators. This
patch moves the BusDevFunc class (which is a named tuple encoding a BDF) to
lib.py and uses it for BDF parsing throughout the static allocators.
Tracked-On: #6287
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
This patch adds interrupt pin related information into the board XML,
including:
* The PCI routing table in ACPI DSDT/SSDT are parsed and generated into
the board XML as "interrupt_pin_routing" nodes.
* IRQs encoded in _CRS directly are represented as resources of type
"irq".
* Interrupt lines (i.e. INTx#) of PCI devices are represented as
resources of type "interrupt_pin". When the PCI routing table is
available, the corresponding interrupt line is identified and
represented as the "source" attribute of the resource node.
Due to the existence of vIOAPIC in ACRN VMs, the board inspector interprets
the \_PIC method with parameter 1 to inform the ACPI namespace that the
interrupt model should be in APIC mode.
v1 -> v2:
* Remove the msi_enable variable which is defined but never used.
Tracked-On: #6287
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
A vmsix supported passthrough device expects the first unused bar region
for vmsix. Pop the first unused_bar_index in gpa.py instead.
Reference code: init_vmsix_on_msi of hypervisor\dm\vpci\vmsix_on_msi.c
Tracked-On: #6192
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Assign bdf to pci emulated and passthrough devices.
For pre-launched VM, assigns unique bdf to passthrough devices, inter-vm
shared memory, pci vuart(console and communication vuarts).
For SOS vm, assigns unique bdf to inter-vm shared memory and pci
vuart(console and communication vuarts).
The bdf follows the rules below:
- the bdf 00:00.0 is reserved for pci hostbridge
- the assigned bdf range: bus is 0x00, dev is in range [0x1, 0x20)
and the fuc is 0x00
- the bdf must be unique, which means any vm's emulated devices cannot
share the same bdf with existing devices
- some devices's bdf is hardcoded, modify its bdf would leads the
device cannot be dicoverd by os. A HARDCODED_BDF_LIST in bdf.py documents
them
- the passthrough devices' bdf can be reused in SOS vm
Tracked-On: #6024
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add methods allocates the mmio bar base to console vuart,
communication vuarts, inter-vm shared memory and passthrough pci
devices.
For SOS:
- get low mem by parsing board xml.
- get high mem by parsing board xml, if the high mem is not enabled,
the high mem start address would be ~0UL and the end address is 0UL
- get the occupied mmio windows by parsing board.xml
- for each console vuart, communication vuart and inter-vm shared memory
devices, assign unused mmio windows to them
- all the assigned mmio windows must be unique and should not overlay
with any devices' mmio window
- the passthrough devices mmio windows can be reused in SOS vm
- each allocated mmio start address must be 4k alignment if the length
of bar is smaller than 4k
- each allocated mmio start address must be aligned with the bar length
if its length is greater than 4k
- the 32bits bar will fall in low mem range only
- 64bits bar will look for free mmio in low mem rage first, if the high
mem is enabled, the 64bits bar will look for free mmio in high mem
range if there is not enough space in low mem range
- allocator raises an error if there is not enough mmio space
For pre-launched VM:
- the high mem range is [256G, 512G)
- the low mem range is [2G, 3.5G)
- there is no used mmio window initially
- for each console vuart, communication vuart, inter-vm shared memory
devices and passthrough devices, assign unused mmio windows to them
- all the assigned mmio windows must be unique and should not overlay
with any devices' mmio window
- the 32bits bar will fall in low mem range only
- 64bits bar will look for free mmio in low mem rage first and then
look for free mmio in high mem range if there is not enough space in
low mem range
- each allocated mmio start address must be 4k alignment if the length
of bar is smaller than 4k
- each allocated mmio start address must be aligned with the bar length
if its lenght is greater than 4k
- allocator raises an error if there is not enough mmio space
Tracked-On: #6024
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add a common method "get_shmem_regions":
This method get <IVSHMEM_REGION> and extracts the region size, region
position in xml and and vm ids which share this regions. Returns a
dictionary:
{'vm_id':{'region_name':{'id': region position,'size': region size,}}}
Add vm type checking methods:
is_pre_launched_vm, is_post_launched_vm and is_sos_vm.
Tracked-On: #6024
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
This patch adds support to parse RTCT v2 using the refined board XML
schema. The major changes include:
- Add the RTCT v2 parser in the acpiparser module. The version of an RTCT
is detected automatically to choose the right parser.
- Extract software SRAM capabilities of caches into the board XML.
- Move the logic that determines the software SRAM base address for the
pre-launched VM to the static allocator of GPAs.
- Generate software SRAM related macros into misc_cfg.h when necessary.
Tracked-On: #6020
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
This file allocates the resource of pio base.
The available pio base is in ['0x3F8', '0x2F8', '0x3E8', '0x2E8'] and it
cannot be used by native device.
When any of sos legacy vuarts are enabled, assign a pio base to legancy
vuarts' base.
The allocator follows rules:
1. An SOS legacy vuart only support PIO vuart.
2. To assign a pio base for sos legacy vuart 0:
- If the hv/DEBUG_OPTIONS/SERIAL_CONSOLE is one of
[ttys0, ttys1, ttys2, ttys3] and it's a pio vuart in the native
environment, the pio base of SOS legacy vuart 0 would be the same as
native one.
- If the hv/DEBUG_OPTIONS/SERIAL_CONSOLE is not one of
[ttys0, ttys1, ttys2, ttys3], assigns a pio base to SOS legacy vuart 0
from avilable pio base.
- If the hv/DEBUG_OPTIONS/SERIAL_CONSOLE is not one of
[ttys0, ttys1, ttys2, ttys3] but a pio vuart, will assigns a pio
base to SOS legacy vuart 0 from avilable pio base and raise a
warning to user.
3. To assign a pio base for sos legacy vuart 1:
- Assigns a pio base to SOS legacy vuart 1 from avilable pio base.
- If all the available pio bases list is empty (which means all are
in used by native), it assigns one of the pio base to SOS legacy
vuart 1 anyway, but raise a warning to user.
4. Assigned pio bases must be unique.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Create an intx.py which is a static allocator to allocate the irq
resources. The available irq list is based on the native irqs which
are in range [0, 15] and are not used by native os.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
If a cpu_affinity node of SOS is not present in the scenario.xml,
assign the native cpus which are not assigned to pre-launched vm to
SOS vm.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Refine the "append_node" which can add new node with an attribute and
return the appended node.
The method "get_node" finds the xpath value and return it if there is an
unique node exists, otherwise it returns None.
It is used to get an xpath element node or can determine the xpath existence.
The "get_text" is replaced with "get_node". The only get_text in
hv_ram.py is modified accordingly.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Create lib.py which contains the common methods that are shared by static
allocators under misc/config_tools/static_allocators.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Create a file which contains user-defined errors for config-tools.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
add 2 * max (IVSHMEM_SHM_SIZE, 2M) in HV_RAM_SIZE calculation to
avoid ram overflow caused by additional memory usage for shared
memory alignment.
Tracked-On: #5955
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
update HV_RAM_SIZE calculation algorithm to 20MB + VM number*
16MB, which consists of text segment rodata(2MB), bss data(about
1MB), bss.ppt_pages(2.4MB), bss.ctx_tables(6MB), bss.vm_array(
3.2MB), bss.ivshmem_base(2MB+1.8MB for alignment) and
bss.post_uos_sworld_memory(16MB*post-launched VM number).
Tracked-On: #5927
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Remove vm_configs folder and move all the XML files and generic code example into config_tools/data
Tracked-On: #5644
Signed-off-by: Xie, nanlin <nanlin.xie@intel.com>
