This patch renames the GUEST_FLAG_TPM2_FIXUP to
GUEST_FLAG_SECURITY_VM.
v2 -> v3:
The "FIXUP" suffix is removed.
Tracked-On: #6320
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
MAXIMUM_PA_WIDTH will be calculated from board information.
Tracked-On: #6357
Signed-off-by: Liang Yi <yi.liang@intel.com>
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
It is used to specify the maximum number of EFI memmap entries.
On some platforms, like Tiger Lake, the number of EFI memmap entries
becomes 268 when the BIOS settings are changed.
The current value of MAX_EFI_MMAP_ENTRIES (256) defined in hypervisor
is not big enough to cover such cases.
As the number of EFI memmap entries depends on the platforms and the
BIOS settings, this patch introduces a new entry MAX_EFI_MMAP_ENTRIES
in configurations so that it can be adjusted for different cases.
Tracked-On: #6442
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Rename KERNEL_ZEPHYR to KERNEL_RAWIMAGE. Added new type "KERNEL_ELF".
Add CONFIG_GUEST_KERNEL_RAWIMAGE, CONFIG_GUEST_KERNEL_ELF and/or
CONFIG_GUEST_KERNEL_BZIMAGE to config.h if it's configured.
Tracked-On: #6323
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Extract the log area address from TPM2 acpi table and add node
log_area_start_address to board.xml. This emelment is used by host_pa of
mmiodevs.
Tracked-On: #6320
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
There could be multiple ways in the scenario configuration to specify that
no INTx allocation is explicitly allocation to a prelaunched VM:
* Do not have a `pt_intx` node at all.
* Have a `pt_intx` node with no text.
* Have a `pt_intx` node with a text that has nothing but whitespaces,
tabs and newlines.
The current implementation only supports the first way, and will cause
build-time failures when a scenario configuration uses the latter two. The
following changes are introduced by this patch to fix such errors.
* The INTx static allocator queries the text() of `pt_intx` nodes
directly to gracefully handle `pt_intx` nodes with no text.
* The XSLT of pt_intx.c clears all kinds of white spaces from the text of
`pt_intx` nodes before calculating the set of allocated INTx mappings.
Tracked-On: #6287
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Add SECURITY_VM_FIXUP config for Security VM whether it needs to do fixup
for TPM2 and SMBIOS
Tracked-On: #6320
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Signed-off-by: Fei Li <fei1.li@intel.com>
ACRN used to prepare the vTPM2 ACPI Table for pre-launched VM at the build stage
using config tools. This is OK if the TPM2 ACPI Table never changes. However,
TPM2 ACPI Table may be changed in some conditions: change BIOS configuration or
update BIOS.
This patch do TPM2 fixup to update the vTPM2 ACPI Table and TPM2 MMIO resource
configuration according to the physical TPM2 ACPI Table.
Tracked-On: #6366
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Signed-off-by: Fei Li <fei1.li@intel.com>
If the MAX_MSIX_TABLE_NUM is specified in scenario.xml. Return the
largest number from count of MSI, table_size of MSIX or
MAX_MSIX_TABLE_NUM of scenario.xml.
Tracked-On: #6235
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
This patch allocates interrupt lines among VMs according to the PCI devices
assigned to them.
v1 -> v2:
* Remove the usage of VMx_PT_INTX_NUM macro in vm_configuration.c; use the
concrete numbers directly.
* The static allocator will also complain if any interrupt line is allocated to
a VM with LAPIC_PASSTHROUGH.
v2 -> v3:
* Fix a minor coding style issue.
Tracked-On: #6287
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
It is a common practice to parse PCI BDF in the static allocators. This
patch moves the BusDevFunc class (which is a named tuple encoding a BDF) to
lib.py and uses it for BDF parsing throughout the static allocators.
Tracked-On: #6287
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
IC_ASSIGN_MMIODEV -> ACRN_IOCTL_ASSIGN_MMIODEV
IC_DEASSIGN_MMIODEV -> ACRN_IOCTL_DEASSIGN_MMIODEV
struct acrn_mmiodev has slight change. Move struct acrn_mmiodev into
acrn_common.h because it is used by both DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Configure PTM in post-launched VM using <PTM> element. If the //vm/PTM
sets to 'y', pci_dev.c.xsl appends the virtual root port to
corresponding struct acrn_vm_pci_dev_config of that VM. Currently it
supports only post-launched VMs.
Configure enable_ptm for dm argument. If a uos/enable_ptm with uos id
= 'vm_id 'sets to 'y' and the vm/PTM with the same vm_id sets to 'y',
append an "enable_ptm" flag to the end of passthrough ethernet devices.
Currently there is only ethernet card can support the "enable_ptm"flag.
For the schema validation, the <PTM> can only be ['y', 'n'].
For the launched script validation, the <enable_ptm> can only be ['y',
'n']. If the <enable_ptm> sets to 'y' but the corresponding <PTM> sets
to 'n', the launch script will fail to generate.
Tracked-On: #6054
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Add an xslt file "board_info.h.xsl". This file is used to
generate board_info.h which is used by hypervisor.
Tracked-On: #6024
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add an xslt file "pci_dev.c.xsl". This file is used to
generate pci_dev.c which is used by hypervisor.
Tracked-On: #6024
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
acrn:get-vbdf: get the virtual bdf from allocation.xml based on vmid and device name
acrn:get-pbdf: get physical bdf from <pci_dev>
acrn:ptdev-name-suffix: fix the name to look up allocation.xml
acrn:get-hidden-device-num: get the number of hidden devices based on
board name
acrn:is-vmsix-supported-device: check if a device is a vmsix supported
device based on the vendor and identifier
Tracked-On: #6024
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
If there is hugepage support from board xml, config tool will
add hugepagesz=1G hugepages=[size] into sos kernel cmdline,
the size is calculated by memory size in G minusing 3.
The reason for reducing 3 is that it is reserved for SOS VM use.
Tracked-On: #5815
Signed-off-by: Kunhui Li <kunhuix.li@intel.com>
Reviewed-By: Junjie Mao <junjie.mao@intel.com>
This patch adds support to parse RTCT v2 using the refined board XML
schema. The major changes include:
- Add the RTCT v2 parser in the acpiparser module. The version of an RTCT
is detected automatically to choose the right parser.
- Extract software SRAM capabilities of caches into the board XML.
- Move the logic that determines the software SRAM base address for the
pre-launched VM to the static allocator of GPAs.
- Generate software SRAM related macros into misc_cfg.h when necessary.
Tracked-On: #6020
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
'psram' and 'PSRAM' are legacy names and replaced
with 'ssram' and 'SSRAM' respectively.
Tracked-On: #6012
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuang Zheng <shuang.zheng@intel.com>
NVMX_ENABLED: ACRN is built to support nested virtualization if set.
GUEST_FLAG_NVMX_ENABLED: indicates that the VMX capability can be present
in this guest to run nested VMs.
Tracked-On: #5923
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The macro definition SOS_VM_BOOTARGS in vm_configurations.h calls
macros SOS_ROOTFS, SOS_CONSOLE and SOS_BOOTARGS_DIFF which is defined in
misc_cfg.h and parsed from scenario.xmls.
Add a whitespace in the end of the argument macros to prevent arguments
are concatenated in a single line.
Tracked-On: #5998
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Instead of "#include <x86/foo.h>", use "#include <asm/foo.h>".
In other words, we are adopting the same practice in Linux kernel.
Tracked-On: #5920
Signed-off-by: Liang Yi <yi.liang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Add a xslt file "misc_cfg.h.xsl". This file is used to
generate misc_cfg.h which is used by hypervisor.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add a xslt file "ivshemem_cfg.h.xsl". This file is used to
generate ivshemem_cfg.h which is used by hypervisor.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add a xslt file "pt_intx.c.xsl". This file is used to
generate pt_intx.c which is used by hypervisor.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add a xslt file "vm_configurations.h.xsl". This file is used to
generate vm_configurations.h which is used by hypervisor.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add a xslt file "vm_configurations.c.xsl". This file is used to
generate vm_configurations.c which is used by hypervisor.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add lib.xsl under config_tools/xforms.
This lib.xsl contains the variables and customized functions for
xslt transformation.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
remove UOS_RAM_SIZE and SOS_RAM_SIZE in scenario config since these
two config elements are useless.
Tracked-On: #5927
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Add the capability to disable or enable #AC for Split-locked Access
through <scenario>.xmls. This was implemented through Kconfig. Move this
configuration from Kconfig to xmls.
Tracked-On: #5798
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Remove vm_configs folder and move all the XML files and generic code example into config_tools/data
Tracked-On: #5644
Signed-off-by: Xie, nanlin <nanlin.xie@intel.com>
