When generate the launch scripts, the pm_by_vuart setting of pm_notify_channel
in launch setting should be according to the config of SOS vuart1.
Tracked-On: #5154
Signed-off-by: Shixiong Zhang <shixiongx.zhang@intel.com>
Move the function which are used to get available ttysn
from board catalogue to library catalogue
Tracked-On: #5154
Signed-off-by: Shixiong Zhang <shixiongx.zhang@intel.com>
We use offline ACPI generator tool to create offline ACPI tables for
pre-launched VMs. Update getting start guide for hybrid and logical
partition mode to launch pre-launched VMs with offline ACPI binaries.
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
move MACRO of IVSHMEM region name to ivshmem_cfg.h and bug fix that
avoids multiple declarations of mem_regions in ivshmem_cfg.h
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The MACRO of IVSHMEM shared region name is relevant to scenario, move
the MACRO from pci_devices.h which should be consistent for different
scenarios to ivshmem_cfg.h which is the configuration for IVSHMEM and
could vary in sceanrios.
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This is a bug fix that avoids multiple declarations of mem_regions
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
so that vm_configurations.h/vm_configurations.c are consistent for
same scenario
Tracked-On: #5229
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Comments will be added for the HV_SUPPORTED_MAX_CLOS/MAX_MBA_CLOS_NUM_ENTRIES/MAX_CACHE_CLOS_NUM_ENTRIES
macros in generated code
Tracked-On: #5229
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Move struct pt_intx_config vm0_pt_intx[] defintion to pt_intx.c
so that vm_configurations.h/vm_configurations.c are consistent for different boards
Tracked-On: #5229
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
so that vm_configurations.h/vm_configurations.c are consistent for different boards
The boilerplate code is protected by #ifdef P2SB_BAR_ADDR/#endif, so it will
not hurt if we always produce related code.
Define new macros P2SB_BAR_ADDR_GPA and P2SB_BAR_SIZE to make the code more flexible.
Tracked-On: #5229
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
so that vm_configurations.h/vm_configurations.c are consistent for different boards
The boilerplate code is protected by #ifdef VM0_PASSTHROUGH_TPM/#endif, so it will
not hurt if we always produce related code.
Define a new macro VM0_TPM_BUFFER_BASE_ADDR_GPA to define the allocated gpa for VM0_TPM_BUFFER_BASE_ADDR
to make the code more flexible.
Tracked-On: #5229
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
so that vm_configurations.h/vm_configurations.c are consistent for different boards
The boilerplate code is protected by #ifdef CONFIG_RDT_ENABLED/#endif, so it will
not hurt if we always produce the .clos code.
Tracked-On: #5229
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
so that vm_configurations.h/vm_configurations.c are consistent for different boards
Debugged and refactored the split_cmdline() function
Tracked-On: #5229
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
so that vm_configurations.h/vm_configurations.c are consistent for different boards
Tracked-On: #5229
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
so that vm_configurations.h/vm_configurations.c are consistent for different boards
Tracked-On: #5229
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
For python versions prior to 3.7, dict order is not guaranteed.
Use ordered dict to ensure consistent ordering for the same input,
otherwise, the generated config files may change every time the config tool runs
Fix some error messages in code/comment
Tracked-On: #5229
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
add extern acrn_vm_pci_dev_config variables in vm_configuration.c
when ivshmem configured on scenarios with ivshmem configured.
Tracked-On: #5298
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Change shared memory name prefix from sos to dm
Change shared memory size unit from byte to megabyte
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The commit of da81a0041d
"HV: add e820 ACPI entry for pre-launched VM" introduced a issue that the
base_hpa and remaining_hpa_size are also calculated on the entry of 32bit
PCI hole which from 0x80000000 to 0xffffffff, which is incorrect;
Tracked-On: #5266
Signed-off-by: Victor Sun <victor.sun@intel.com>
Use vm_type to configure the load_type/uuid/severity,
Delete uuid lines in config scenario.
Tracked-On: #4641
Signed-off-by: Shixiong Zhang <shixiongx.zhang@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
increase the length of DSDT table to avoid memory overwrited by
subsequent ACPI tables.
Tracked-On: #5266
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
add TSN device OTN1 config into offline ACPI table for TSN device
passthrough to pre-launched RTVM.
v2) update TSN device list from bdf list to vid:pid list.
Tracked-On: #5266
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
generate ASL code of ACPI tables for pre-launched VMs on nuc7i7dnb,
whl-ipc-i5, whl-ipc-i7, ehl-crb-b boards
Tracked-On: #5266
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
This reverts commit a67a85c70d.
this revert only for release_2.2 branch to fix WaaG reboot failed
restore memset in create_vm because sub-module use uninitialized data
in vm structure after reboot
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Tracked-On: #4958
On a PCI type HV uart, the bdf value is in a union together with
mmio_base_vaddr, then the value would be overridden by mmio_base_addr
in uart16550_init(), result in is_pci_dbg_uart() returns a wrong value
and then uart hang.
Tracked-On: #5288
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
enable TPM2 config on ehl-crb-b board and update TPM2 configs on
legacy boards.
Tracked-On: #5266
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
For EHL hybrid_rt scenario, the requirement needs a network device
passthough to pre-launched VM0.
Tracked-On: #5286
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
add 2 MACROs: DEFAULT_PCI_MMCFG_START_BUS and DEFAULT_PCI_MMCFG_END_BUS
in platform_acpi_info.h.
Tracked-On: #5233
Signed-off-by: Shixiong Zhang <shixiongx.zhang@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
add 2 MACROs: DEFAULT_PCI_MMCFG_START_BUS and DEFAULT_PCI_MMCFG_END_BUS
in platform_acpi_info.h.
Tracked-On: #5233
Signed-off-by: Shixiong Zhang <shixiongx.zhang@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Per PCI Firmware Specification Revision 3.0, 4.1.2. MCFG Table Description:
Memory Mapped Enhanced Configuration Space Base Address Allocation Structure
assign the Start Bus Number and the End Bus Number which could decoded by the
Host Bridge. We should not access the PCI device which bus number outside of
the range of [Start Bus Number, End Bus Number).
For ACRN, we should:
1. Don't detect PCI device which bus number outside the range of
[Start Bus Number, End Bus Number) of MCFG ACPI Table.
2. Only trap the ECAM MMIO size: [MMCFG_BASE_ADDRESS, MMCFG_BASE_ADDRESS +
(End Bus Number - Start Bus Number + 1) * 0x100000) for SOS.
Tracked-On: #5233
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
compile ACPI tables for pre-launched VMs to one binary when pre-build
hypervisor.
Tracked-On: #5266
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
use offline tool to generate one binary of ACPI tables for pre-launched
VMs, then load the ACPI binary into guest physical memory as grub module.
Users can configure the resources or devices like TPM2 for the
pre-launched VM from sceanrio XMLs or UI, and the offline tool will
generate ASL code of the ACPI tables with the configured resources or
devices, then compile the ASL code to one binary when building ACRN.
Tracked-On: #5266
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The old method of build pre-launched VM vacpi by HV source code is deprecated,
so remove related source code;
Tracked-On: #5266
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously we use a pre-defined structure as vACPI table for pre-launched
VM, the structure is initialized by HV code. Now change the method to use a
pre-loaded multiboot module instead. The module file will be generated by
acrn-config tool and loaded to GPA 0x7ff00000, a hardcoded RSDP table at
GPA 0x000f2400 will point to the XSDT table which at GPA 0x7ff00080;
Tracked-On: #5266
Signed-off-by: Victor Sun <victor.sun@intel.com>
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously the ACPI table was stored in F segment which might not be big
enough for a customized ACPI table, hence reserve 1MB space in pre-launched
VM e820 table to store the ACPI related data:
0x7ff00000 ~ 0x7ffeffff : ACPI Reclaim memory
0x7fff0000 ~ 0x7fffffff : ACPI NVS memory
Tracked-On: #5266
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
EHL PSE TSN GbE driver is default set to use 32bit of dma addressing.
net: stmmac: configure PSE Gbe to 32bit dma addressing
https://github.com/intel/linux-intel-lts/commit/011c8f
When VM has more than 4GB physical memory, Linux kernel uses the bounce
buffers (swiotlb) to translate kernel data in 64bit memory to 32bit
range for the sake of the DMA because iommu is not available. The
default swiotlb value 32768 is insufficient to support two PSE TSN GbEs
at the same time. Increase the value to 131072 otherwise two GbEs can't
link up.
Tracked-On: #5243
Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
When creating a new launch setting, config app can't fine the
scenario config which caused the app failed to load the new
launch setting.
Tracked-On: #5282
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Build and install 'acrnctl' for regardless of the RELEASE value. Kata Containers
depends on 'acrnctl' in order to work correctly and we therefore need to make
sure that it is built and installed correctly regardless of whether this is a
debug or a release build.
Tracked-On: #4940
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Add a new scenario xml file for EHL which is derived from hybrid_rt for
validation of certain passthru devices in prelaunched RTVM. Because the
configuration requires to disable GPIO support for SOS VM, it should
not be merged into the standard hybrid_rt scenario. According to this
change, remove the SCI passthru setting from existing hybrid_rt since
from now on hybrid_rt_fusa should be used for SCI passthru test.
Tracked-On: #5278
Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
hv: vpci: Add 0x45, which is the high-byte of device id of EHL,
to the enumeration array in vhostbridge.c. This is to fix the
problem that PCIe extended capabilities like SR-IOV cannot be
used on EHL.
Tracked-On: #5256
Signed-off-by: Qian Wang <qian1.wang@intel.com>
minor_ver should be le 2 when major_ver == 2.
Tracked-On: #5276
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Previously the min load_addr for HV image is hard coded to 0x10000000 when
CONFIG_RELOC is enabled, now use CONFIG_HV_RAM_START as its prefer minimum
address like setting of CONFIG_PHYSICAL_START do in Linux kernel.
With this patch, we can offload the CONFIG_HV_RAM_START algorithm to
acrn-config or manually set it in scenario XML on some special boards.
Tracked-On: #5275
Signed-off-by: Victor Sun <victor.sun@intel.com>
update the size of ivshmem memory region to [2MB, 512MB].
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
When HV pass through the P2SB MMIO device to pre-launched VM, vgpio
device model traps MMIO access to the GPIO registers within P2SB so
that it can expose virtual IOAPIC pins to the VM in accordance with
the programmed mappings between gsi and vgsi.
Tracked-On: #5246
Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Always use P2SB_ as a prefix for all macro definitions related to P2SB
MMIO passthru. And introduce the new P2SB_VGPIO_DM_ENABLED macro to
indicate the presence of the pre-launched VM which requires the feature.
This macro intends to be used to enclose source files with ifdef where
macros defined by config-tool being used which are available only when
the feature is enabled. It is required to avoid causing compilation
errors when users build HV without enabling the feature.
Tracked-On: #5246
Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
