With pins being uint8_t, implicit narrowing conversions arises since unsigned
integer constants, irq IDs and general registers have type ''unsigned
int''. Make such conversions explicit.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
PIC pin IDs should be logically unsigned, while we currently use ''int'' to
represent them.
Following the convention we use unsigned IDs, this patch converts the
representation of pins to uint8_t. A special value VPIC_INVALID_PIN is
introduced to represent the case when a valid target pin cannot be
found (previously -1 is used for this case). The branch conditions are updated
accordingly, following the convention below.
(for ''pin''s representing a per-PIC pin)
if (pin != -1) -> if (pin < NR_VPIC_PINS_PER_CHIP)
if (pin == -1) -> if (pin >= NR_VPIC_PINS_PER_CHIP)
if (pin >= 0 && pin < 8) -> if (pin < NR_VPIC_PINS_PER_CHIP)
if (pin >= 0 && pin <= 7) -> if (pin < NR_VPIC_PINS_PER_CHIP)
if (pin >= 0) -> if (pin < NR_VPIC_PINS_PER_CHIP)
(for ''pin''s representing a pin in the vPIC with 2 cascading PICs)
if (pin >= 0 && pin <= 15) -> if (pin < NR_VPIC_PINS_TOTAL)
if (pin > 15) -> if (pin >= NR_VPIC_PINS_TOTAL)
Related local variables are also changed accordingly.
v1 -> v2:
* Rename the number of pins per PIC to NR_VPIC_PINS_PER_CHIP, and the number
of pins of 2 cascading PICs to NR_VPIC_PINS_TOTAL.
* Using "%hhu" instead of "%d" in format string when a pin is expected.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch drops the duplicated definitions to ''true'' and ''false'' and
initializes boolean variables with boolean values instead of integers.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Port I/O handlers are expected to accept unsigned port address and width which
have type uint16_t and size_t accordingly. The internal handlers in vpic, on the
other hand, declares signed addresses and width in their prototypes. This patch
enforces unsignedness of addresses and widths in these handlers.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The number of initialization command word (ICW) and register contents are
logically unsigned and they have already been used in such way. This patch
changes the declaration of them so that the declarations, definitions and uses
are all aligned.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN needs to trap the pm1a/pm1b written/read from VM0. So we
could know when should we put the system to S3.
We will have two path back to VM0:
- S3 enter/exit sucess. Will reset VM0 and jump to VM0 wakeup vec
with real mode
- S3 enter/exit failed. Will return to the next instruction of
pm1a/pm1b register writing. VM0 will read the pm1a/pm1b evt
register to check whether it's waked up or not.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Emulate VM0 resume from S3 state:
- reset BSP of VM0
- set the BSP entry to saved VM0 wakeup vec and set BSP to real mode
- start BSP
To match trampoline_spinlock release on ACRN Sx resume path, acquire
trampoline_spinlock if ACRN Sx enter fails.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Couple of small changes merged in this change:
- export main_entry, trampoline_spinlock and stop_cpus.
- change vm_resume() name to resume_vm()
- change resume_console_enable() name to resume_console()
- extend reset_vcpu to reset more fields of vcpu
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It is already assumed that ''long'' has 8-bytes, and thus there is no need to
use ULL to indicate a 8-byte unsigned constant.
This patch changes all ULL suffixes found in the hypervisor to UL.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
phys_cpu_num is more popular than phy_cpu_num, update them
through command.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Update the structure definition to define the address type
(HVA vs HPA vs GPA) explicitly.
Convert address to HVA before access the GPA/HPA type of address.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Before we set the page table, we should know the attribute. So
move configure the page table attribute outside of modify_paging.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The member of width in struct e820_entries,can be declared to
uint32_t(the range of the member is bigger than 0) to avoid
negative shift.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C doesn't allowed negative shift, changed any potential signed value
to unsigned value.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the hypervisor, physical cpu id is defined as "int" or "uint32_t"
type in the hypervisor. So there are some sign conversion issues
about physical cpu id (pcpu_id) reported by static analysis tool.
Sign conversion violates the rules of MISRA C:2012.
In this patch, define physical cpu id as "uint16_t" type for all
modules in the hypervisor and change related codes. The valid
range of pcpu_id is 0~65534, INVALID_PCPU_ID is defined to the
invalid pcpu_id for error detection, BROADCAST_PCPU_ID is
broadcast pcpu_id used to notify all valid pcpu.
The type of pcpu_id in the struct vcpu and vcpu_id is "int" type,
this will be fixed in another patch.
V1-->V2:
* Change the type of pcpu_id from uint32_t to uint16_t;
* Define INVALID_PCPU_ID for error detection;
* Define BROADCAST_PCPU_ID to notify all valid pcpu.
V2-->V3:
* Update comments for INVALID_PCPU_ID and BROADCAST_PCPU_ID;
* Update addtional pcpu_id;
* Convert hexadecimals to unsigned to meet the type of pcpu_id;
* Clean up for MIN_PCPU_ID and MAX_PCPU_ID, they will be
defined by configuration.
Note: fix bug in the init_lapic(), the pcpu_id shall be less than 8,
this is constraint by implement in the init_lapic().
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C explicit required expression should be boolean when
in branch statements (if,while...).
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C explicit required expression should be boolean when
in branch statements (if,while...).
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C explicit required expression should be boolean when
in branch statements (if,while...).
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We will get following warnings when build acrn as release version. This patch
fix those warnings.
No functional change.
...
arch/x86/cpu.c: In function ‘stop_cpus’:
arch/x86/cpu.c:727:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
if (get_cpu_id() == i) /* avoid offline itself */
^~
arch/x86/vtd.c: In function ‘dmar_enable_translation’:
arch/x86/vtd.c:84:12: warning: unused variable ‘start’ [-Wunused-variable]
uint64_t start = rdtsc(); \
...
arch/x86/guest/instr_emul.c: In function ‘get_gla’:
arch/x86/guest/instr_emul.c:615:6: warning: variable ‘error’ set but not used [-Wunused-but-set-variable]
int error;
...
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C required that return value should be used, missing for it should
add "(void)" prefix before the function call.
Some function can be declared without return value to avoid this problem.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This change is to fix a guest vm hang issue at vm reset, especially easy to
be seen when it's a watchdog timeout reset.
vlapic_init create and init vlapic.vlapic_timer without deleting the
timer from cpu_times list, which breaks the list, results in a timer remains
with callback points to an invalid location.
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Yan, Like <like.yan@intel.com>
There are some __unused attached to variables. But, those variables
are used by the function actually.
This patch remove them. No functional change.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The pm S state data is from host ACPI info and needed for S3/S5
implementation.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently irq and vector numbers are used inconsistently.
* Sometimes vector or irq ids is used in bit operations, indicating
that they should be unsigned (which is required by MISRA C).
* At the same time we use -1 to indicate an unknown irq (in
common_register_handler()) or unavailable irq (in
alloc_irq()). Also (irq < 0) or (vector < 0) are used for error
checking. These indicate that irq or vector ids should be signed.
This patch converts irq and vector numbers to unsigned 32-bit integers, and
replace the previous -1 with IRQ_INVALID or VECTOR_INVALID. The branch
conditions are updated accordingly.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- For UEFI boot, allocate memory for trampoline code in ACRN EFI,
and pass the pointer to HV through efi_ctx
- Correct LOW_RAM_SIZE and LOW_RAM_START in Kconfig and bsp_cfg.h
- use trampline_start16_paddr instead of the hardcoded
CONFIG_LOW_RAM_START for initial guest GDT and page tables
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
emalloc_for_low_mem() is used if CONFIG_EFI_STUB is defined.
e820_alloc_low_memory() is used for other cases
In either case, the allocated memory will be marked with E820_TYPE_RESERVED
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
- vm_gva2gpa is same as gva2gpa, so replace it with gva2gpa directly.
- remove dead usage of vm_gva2gpa in emulate_movs.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
using copy_from_gva to refine function acrn_update_ucode
v2:
- inject #PF if copy_from_gva meet -EFAULT
- remove VCPU_RETAIN_RIP when inject #PF
- refine MACRO GET_DATA_SIZE
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
there is no need to use wrap function vm_restart_instruction, we
can use VCPU_RETAIN_RIP directly
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
use copy_from_gva in vie_init, if copy_from_gva meet -EFAULT, inject #PF.
And for decode_instruction, if return -EFAULT, the caller should keep return
path with successful status.
v2:
- remove vm_restart_instruction when inject #PF
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
there are data transfer between guest virtual space(GVA) & hv(HVA), for
example, guest rip fetching during instruction decoding.
GVA is address continuous, but its GPA could be only 4K page address
continuous, this patch adds copy_from_gva & copy_to_gva functions by
doing page walking of GVA to avoid address breaking during accessing GVA.
v2:
- modify API interface based on new gva2gpa function, err_code added
- combine similar code with inline function _copy_gpa
- change API name from vcopy_from/to_vm to copy_from/to_gva
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
V2->V3 modified the description
V1->V2 add __unused to handler_private_data
while misra c analyse callback function, it will dereference the pointer
plus an implicit getting address when extra parentheses with inner
star(example:(*foo)()). the first dereference should be removed.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
reviewed-by: Li,Fei1 <fei1.li@intel.com>
reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Cleanup "cpu_secondary_xx" in the symbols/section/functions/variables
name in trampline code.
There is item left: the default C entry is Ap start c entry. Before
ACRN enter S3, the c entry will be updated to high level S3 C entry.
So s3 resume will go s3 resume path instead of AP startup path.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
- unmask MTRR from guest CPUID to enable MTRR
- MTRR virtualization can be disabled by commenting out CONFIG_MTRR_ENABLED
Signed-off-by: bliu11 <baohong.liu@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-rdmsr: emulate all MTRR registers besides variable range MTRRs
-wrmsr: emulate all MTRR registers besides variable range MTRRs and MTRRCAP
Signed-off-by: bliu11 <baohong.liu@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per performance consideration, we don't flush vcpu context when doing
vcpu swithing (because it's only swithing between vcpu and idle).
But when enter S3, we need to call vmclear against all vcpus attached
to APs. We need to know which vcpu is attached with which pcpu.
This patch introduced API to get vcpu mapped to specific pcpu.
Signed-off-by: Yin Fegnwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
keep the global variables access exclusive in vcpu pause & resume.
Signed-]off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The current implementation of per_cpu relies on several non-c99 features,
and in additional involves arbitrary pointer arithmetic which is not MIS-
RA C friendly.
This patch introduces struct per_cpu_region which holds all the per_cpu
variables. Allocation of per_cpu data regions and access to per_cpu vari-
ables are greatly simplified, at the cost of making all per_cpu varaibl-
es accessible in files.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Enable VMX vpid ctrl and assign an unique vpid to each vcpu
so that VMX transitions are not required to invalidate any
linear mappings or combined mappings.
SDM Vol 3 - 28.3.3.3
If EPT is in use, the logical processor associates all mappings
it creates with the value of bits 51:12 of current EPTP.
If a VMM uses different EPTP values for different guests, it may
use the same VPID for those guests. Doing so cannot result in one
guest using translations that pertain to the other.
In our UOS, the trusty world and normal world are using different
EPTP. So we can use the same VPID for it.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current code, sos/uos bsp can only start from 64bit mode.
For sbl platform:
This patch start sos bsp from protected mode by default.
CONFIG_START_VM0_BSP_64BIT is defined to allow start sos bsp
from 64bit mode. If a config CONFIG_START_VM0_BSP_64BIT
defined in config file, then sos bsp will start from 64bit mode.
This patch start uos bsp from real mode, which needs the integration
of virtual bootloader (vsbl).
For uefi platform:
This patch sets sos bsp vcpu mode according to the uefi context.
This patch starts uos bsp from protected mode, because vsbl is not ready
to publish for uefi platform yet. After vsbl is ready, can change to
start uos bsp from real mode.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
In current implementation, on sbl platform, vm0 bsp
starts from 64bit mode. And hv need to prepare init
page table for it.
In this patch series, on sbl platform, vm0 bsp starts
from non-paging protected mode.
This patch prepares an init gdt for vm0 bsp on sbl
platform.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
