When VHWP enabled, return 0 and px_cnt = 0 on ACRN_PMCMD_GET_PX_CNT,
so that DM will write _CPC to guests' ACPI.
Tracked-On: #8414
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Changes made by this patch includes:
1. Emulate HWP and pstate MSRs/CPUIDs. Those are exposed to guest when
the GUEST_FLAG_VHWP is set:
- CPUID[6].EAX[7,9,10]: MSR_IA32_PM_ENABLE(enabled by hv, always read
1), MSR_IA32_HWP_CAPABILITIES, MSR_IA32_HWP_REQUEST,
MSR_IA32_HWP_STATUS,
- CPUID[6].ECX[0]: MSR_IA32_MPERF, MSR_IA32_APERF
- MSR_IA32_PERF_STATUS(read as base frequency when not owning pCPU)
- MSR_IA32_PERF_CTL(ignore writes)
2. Always hide HWP interrupt and package control MSRs/CPUIDs:
- CPUID[6].EAX[8]: MSR_IA32_HWP_INTERRUPT(currently ACRN is not able
to deliver thermal LVT virtual interrupt to guests)
- CPUID[6].EAX[11,22]: MSR_IA32_HWP_REQUEST_PKG, MSR_IA32_HWP_CTL
Tracked-On: #8414
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Currently CPU frequency control is hidden to guests, and controlled
by hypervisor. While it is sufficient in most cases, some guest OS may
still need CPU performance info to make multi-core scheduling decisions.
This is seen on Linux kernel, which uses HWP highest performance level
as CPU core's priority in multi-core scheduling (CONFIG_SCHED_MC_PRIO).
Enabling this kernel feature could improve performance as single thread
workloads are scheduled on the highest performance cores. This is
significantly useful for guests with hybrid cores.
The concept is to expose performance interface to guest who exclusively
owns pCPU assigned to it. So that Linux guest can load intel_pstate
driver which will then provide the kernel with each core's schedule
priority.
Intel_pstate driver also relies on CONFIG_ACPI_CPPC_LIB to implement
this mechanic, this means we also need to provide ACPI _CPC in DM.
This patch sets up a guest flag GUEST_FLAG_VHWP to indicate whether
the guest can have VHWP feature.
Tracked-On: #8414
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
This patch refactors partition_epc() to make the code easier to
understand, also fixes the maybe-uninitialized warning for gcc-13.
Initializing 'vm_config' to get_vm_config(0) is okay here as scenario
validator ensures CONFIG_MAX_VM_NUM to be always larger than 0.
Tracked-On: #8413
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
This patch emulates the PLATFORM_INFO MSR in hypervisor to make it
only visible to Service VM, and only processor ratios (bit 15:8,
47:40 and 55:48) and sample part bit (27) are exponsed. This is
intended to prevent Service VM from changing processor parameters
like turbo ratio.
Tracked-On: #8406
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
When assigning a physical interrupt to a Post-launched VM, if it has
been assigned to ServiceVM, we should remove that mapping first to reset
ioapic pin state and rte, and build new mapping for the Post-launched
VM.
Tracked-On: #8370
Signed-off-by: Qiang Zhang <qiang4.zhang@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ptirq_remapping_info records which physical interrupt is mapped to
the virtual interrupt in a VM. As we need to knonw whether a physical
sid has been mapped to a VM and whether a virtual sid in a VM has been
used, there should be two hash tables to link and iterate
ptirq_remapping_info:
- One is used to lookup from physical sid, linking phys_link.
- The other is used to lookup from virtual sid in a VM, linking virt_link
Without this patch, phys_link or virt_link from different
ptirq_remapping_info was linked by one hash list head if they got the
same hash value, as shown in following diagram.
When looking for a ptirq_remapping_info from physical sid, the original
code took all hash list node as phys_link and failed to get
ptirq_remapping_info linked with virt_link and later references
to its members are wrong.
The same problem also occurred when looking for a ptirq_remapping_info
from virtual sid and vm.
---------- <- hash table
|hlist_head| --actual ptirq_remapping_info address
---------- --------- / --used as ptirq_remapping_info
| ... | |phys_link| ___/
---------- --------- --------- / ---------
|hlist_head| -> |phys_link| <-> |virt_link| <-> |phys_link|
---------- --------- --------- ---------
| ... | |virt_link| | other | |virt_link|
---------- --------- | members | ---------
| other | --------- | other |
| members | | members |
--------- ---------
Tracked-On: #8370
Signed-off-by: Qiang Zhang <qiang4.zhang@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
to enable early print output by pci uart, which has mmio address
above 4G, add the early pagetable map for the MMIO range.
we make an assumption that only map it with 2MB page, since platform
with 39bit memory width have no 1G huge page feature and we cannot
get the capacity at runtime, since it is a very early code stage.
v2->v1:
1. add hva2hpa_early
2. add process when *pdpte is not present
Signed-off-by: hangliu1 <hang1.liu@linux.intel.com>
Reviewed-by: fei1.li <fei1.li@intel.com>
Tracked-On: #6690
The version info is mainly used to tell the user when and where the binary is
compiled and built, this will change the hv version format.
The hv follows the format:
major.minor-stable/unstable-remote_branch-acrn-commit_date-commit_id-dirty
DBG/REL(tag-current_commit_id) scenario@board build by author date.
The '(tag-current_commit_id)' is optional, it exits only when there are
tags for current commit.
e.g.
with tag:
ACRN:\>version
HV: 3.1-stable-release_3.1-2022-09-27-11:15:42-7fad37e02-dirty DBG(tag: v3.1)
scenario3.1@my_desk_3.1 build by zhangwei 2022-11-16 07:02:37
without tag:
ACRN:\>version
HV: 3.2-unstable-master-2022-11-16-14:34:49-11f53d849-dirty DBG
scenario3.1@my_desk_3.1 build by zhangwei 2022-11-16 06:49:44
Tracked-On #8303
Signed-off-by: Zhangwei6 <wei6.zhang@intel.com>
When CPU support MONITOR/MWAIT, OS prefer to use it enter
deeper C-state.
Now ACRN pass through MONITOR/MWAIT to guest.
For vCPUs (ie vCPU A and vCPU B) share a pCPU, if vCPU A uses MWait to enter C state,
vCPU B could run only after the time slice of vCPU A is expired. This time slice of
vCPU A is gone to waste.
For Local APIC pass-through (used for RTVM), the guest pay more attention to
timeliness than power saving.
So this patch hides MONITOR/MWAIT by:
1. Clear vCPUID.05H, vCPUID.01H:ECX.[bit 3] and
MSR_IA32_MISC_ENABLE_MONITOR_ENA to tell the guest VM's vCPU
does not support MONITOR/MAIT.
2. Enable MSR_IA32_MISC_ENABLE_MONITOR_ENA bit for
MSR_IA32_MISC_ENABLE inject 'GP'.
3. Trap instruction 'MONITOR' and 'MWAIT' and inject 'UD'.
4. Clear vCPUID.07H:ECX.[bit 5] to hide 'UMONITOR/UMWAIT'.
5. Clear "enable user wait and pause" VM-execution control, so
UMONITOR/MWAIT causes an 'UD'.
Tracked-On: #8253
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Exclude "GUEST_FLAG_PMU_PASSTHROUGH" from DM_OWNED_GUEST_FLAG_MASK
in case device model rewrite the value in release mode, reserve it
in debug mode.
Signed-off-by: hangliu1 <hang1.liu@linux.intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Tracked-On:#6690
The current code would write 'BAR address & size_maks' into PCIe virtual
BAR before updating the virtual BAR's base address when guest writing a
PCIe device's BAR. If the size of a PCIe device's BAR is larger than 4G,
the low 32 bits size_mask for this 64 bits BAR is zero. When ACRN updating
the virtual BAR's base address, the low 32 bits sizing information would
be lost.
This patch saves whether a BAR writing is sizing or not before updating the
virtual BAR's base address.
Tracked-On: #8267
Signed-off-by: Fei Li <fei1.li@intel.com>
The targets "clean" and "distclean" are special as they do not need BOARD
or SCENARIO from users. This patch stops the guesswork of BOARD and
SCENARIO if any of those two targets are specified.
It is assumed that "clean" or "distclean" is not invoked with other targets
at the same time.
Tracked-On: #8259
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
In the current config.mk board and scenario XMLs are only copied to the
build directory when they do not exist. That prevents users from using XML
files they have edited, probably to fix previously reported validation
errors, for a rebuild unless the former build directory is totally removed.
This patch adds the user-given paths to XML files (if they exist) as
dependencies of the copied files in the build directory, so that users can
now provide new board and/or scenario XMLs to an existing build to
automatically trigger a complete rebuild.
Building without explicitly specifying BOARD and SCENARIO is still
supported if a build directory already exists. In that case the copied
board and scenario XMLs will not be modified.
Tracked-On: #8259
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
ACRN config tools generate source files, scripts and binaries based on
users' inputs in the configurations files, i.e., board and scenario
XMLs. Those generation activities all assume that users' inputs are
properly validated, so that all assumptions they have on such inputs are
hold.
Unfortunately, not all dependencies on validated user inputs are explicitly
stated in the Makefiles today. That will cause random error messages
(typically a Python stack trace) to be printed along with validation errors
when an invalid scenario XML is given, and such messages confuse users
about the root causes of the failure.
This patch decouples scenario validation from genconf.sh and make that step
as a separate target that depends on the board and scenario XMLs. One
timestamp file is generated only when the validation succeeds so that
targets requiring validated XMLs can refer that file in its dependency list
to make it explicit.
Dependencies of the following targets are also updated accordingly:
* $(HV_ALLOCATION_XML), which is the allocation XML including static
allocation results, now also depends on validated XMLs.
* $(HV_CONFIG_TIMESTAMP), which records when the config source files are
generated, now also depends on validated XMLs.
* $(SERIAL_CONF), which is the serial conf for the service VM, depends on
the allocation XML.
By the way, the missing dependency on HV_CONFIG_DIR for touching
HV_DIFFCONFIG_LIST is added to fix the "file not found" issue.
Tracked-On: #8259
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Phony targets are mostly for recipes that are expected to be invoked
directly from the command line as a target and will always be executed. As
a result, it is in most cases not appropriate for a real file target to to
depend on a phony one, as that means the file will always be regenerated.
In the Makefile today, however, dependencies on phony targets are common
and cause the hypervisor to be fully rebuilt regardless of whether an
existing build exists or not.
This patch cleans up the following phony targets which are not meant to be
targets from the command line.
- pre_build: This target has three outputs, namely the prebuild checker,
the ACPI tables for pre-launched VMs and the serial.conf. It is split
into three targets, one for each output.
- headers: This target is an alias of dynamically-generated header
files. It is replaced with a variable so that targets depending on
"header" now depends on the actual header files generated.
With this patch, make will only rebuild modified files and targets
depending on them directly or indirectly.
Tracked-On: #8259
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
The target "default" in hypervisor/Makefile is just an alias of the target
"all" in order to make "all" being the default goal. This patch replaces
that duplicate target and specifies the default goal by defining the
variable .DEFAULT_GOAL instead.
Tracked-On: #8259
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Now ACRN would traps MSI-X Table Structure access and does MSI-X interrupt
remapping for pass-thru PCIe devices. ACRN does this trap by unmmapping the
address ranges where the MSI-X Table Structure locates in granularity of 4K
pages. So there may have other registers (non-MSI-X structures) in these
trapped pages
However, the guest may access these registers (non-MSI-X structures) in these
trapped pages, which needs to be forwarded to the physical device. This patch
forwards the access to real hardware for pass-thru PCIe devices.
Tracked-On: #8255
Signed-off-by: Fei Li <fei1.li@intel.com>
When guest traps and wants to access a mmio region, the ACRN hypervisor
doesn't know the mmio size the guest wants to access until the trap
happens. In this case, ACRN should switch the mmio size and then call
mmio_read8/16/32/64 or mmio_write8/16/32/64 in each trap place.
This patch wrap the mmio read/write with a parameter to assign the mmio
size.
Tracked-On: #8255
Signed-off-by: Fei Li <fei1.li@intel.com>
The current code uses a predefined sworld memory array to reserve memory
for trusty VMs, and assume all post launched VMs are trusty VM which is
not correct.
This patch statically reserved memory just for trusty VMs and save 16M
memory for every non trusty VM.
Tracked-On: #6690
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
The design of ACRN CPU performance management is to let hardware
do the autonomous frequency selection(or set to a fixed value),
and remove guest's ability to control CPU frequency.
This patch is to implement the CPU frequency initializer, which will
setup CPU frequency base on the performance policy type.
Two performance policy types are provided for user to choose from:
- 'Performance': CPU runs at its CPU runs at its maximum frequency.
Enable hardware autonomous frequency selection if HWP is presented.
- 'Nominal': CPU runs at its guaranteed frequency.
The policy type is passed to hypervisor through boot parameter, as
either 'cpu_perf_policy=Nominal' or 'cpu_perf_policy=Performance'.
The default type is 'Performance'.
Both HWP and ACPI p-state are supported. HWP is the first choice, for
it provides hardware autonomous frequency selection, while keeps
frequency transaction time low.
Two functions are added to the hypervisor to call:
- init_frequency_policy(): called by BSP at start up time. It processes
the boot parameters, and enables HWP if it is presented.
- apply_frequency_policy(): called after init_frequency_policy().
It applies initial CPU frequency policy setting for each core. It
uses a set of frequency limits data struct to quickly decide what the
highest/nominal frequency is. The frequency limits are generated by
config-tools.
The hypervisor will not be governing CPU frequency after initial policy
is applied.
Cores running RTVMs are fixed to nominal/guaranteed frequency, to get
more certainty in latency. This is done by setting the core's frequency
limits to highest=lowest=nominal in config-tools.
Tracked-On: #8168
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For an IO request, hv will check if it was registered in asyncio desc
list. If yes, put the corresponding fd to the shared buffer. If the
shared buffer is full, yield the vcpu and try again later.
Tracked-On: #8209
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add hypercall to add/remove asyncio request info. Hv will record the
info in a list, and when a new ioreq is come, hv will check if it is
in the asyncio list, if yes, queue the fd to asyncio buffer.
Tracked-On: #8209
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Current IO emulation is synchronous. The user VM need to wait for the
completion of the the I/O request before return. But Virtio Spec
introduces introduces asynchronous IO with a new register in MMIO/PIO
space named NOTIFY, to be used for FE driver to notify BE driver, ACRN
hypervisor can emulate this register by sending a notification to vCPU
in Service VM side. This way, FE side can resume to work without waiting
for the full completion of BE side response.
Tracked-On: #8209
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Extend sbuf hypercall to support other kinds of share buffer.
Tracked-On: #8209
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
sbuf is now only used for debug purpose, but later, it will be used as a
common interfaces. So, move the sbuf related code out of the debug directory.
Tracked-On: #8209
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Improve SMP call to support ACRN shell to operate RTVM.
before, the RTVM CPU can't be kicked off by notification IPI,
so some shell commands can't support it, like rdmsr/wrmsr,
memory/registers dump. So INIT will be used for RTVM, which
LAPIC is pass-thru.
Tracked-On: #8207
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
By default, notification IPI used to kick sharing pCPU, INIT
used to kick partition pCPU. If USE_INIT_IPI flag is passed to
hypervisor, only INIT will be used to kick pCPU.
Tracked-On: #8207
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
INIT signal has been used to kick off the partitioned pCPU, like RTVM,
whose LAPIC is pass-through. notification IPI is used to kick off
sharing pCPU.
Add mode_to_kick_pcpu in per-cpu to control the way of kicking
pCPU.
Tracked-On: #8207
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The access to PCI config_space is handled in HV for Passthrough pci
devices. And it also provides one mechanism to forward cfg_access of
some registers to DM. For example: the opregion reg for GPU device.
This patch tried to add the support of emulated PCI ROM bar for the
device. And it doesn't handle the phys PCI ROM bar of phys PCI devices.
At the same time the rom firmware is provided in DM and pci rom bar_reg
is also emulated in DM, this leverages the quirk mechanism so that the
access to PCI rom bar_reg is forwarded to DM.
Tracked-On: #8175
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
The design of ACRN CPU performance management is to let hardware
do the autonomous frequency selection(or set to a fixed value),
and remove guest's ability to control CPU frequency.
This patch is to remove guest's ability to control CPU frequency by
removing the guests' HWP/EIST CPUIDs and blocking the related MSR
accesses. Including:
- Remove CPUID.06H:EAX[7..11] (HWP)
- Remove CPUID.01H:ECX[7] (EIST)
- Inject #GP(0) upon accesses to MSR_IA32_PM_ENABLE,
MSR_IA32_HWP_CAPABILITIES, MSR_IA32_HWP_REQUEST,
MSR_IA32_HWP_STATUS, MSR_IA32_HWP_INTERRUPT,
MSR_IA32_HWP_REQUEST_PKG
- Emulate MSR_IA32_PERF_CTL. Value written to MSR_IA32_PERF_CTL
is just stored for reading. This is like how the native
environment would behavior when EIST is disabled from BIOS.
- Emulate MSR_IA32_PERF_STATUS by filling it with base frequency
state. This is consistent with Windows, which displays current
frequency as base frequency when running in VM.
- Hide the IA32_MISC_ENABLE bit 16 (EIST enable) from guests.
This bit is dependent to CPUID.01H:ECX[7] according to SDM.
- Remove CPID.06H:ECX[0] (hardware coordination feedback)
- Inject #GP(0) upon accesses to IA32_MPERF, IA32_APERF
Also DM do not need to generate _PSS/_PPC for post-launched VMs
anymore. This is done by letting hypercall HC_PM_GET_CPU_STATE sub
command ACRN_PMCMD_GET_PX_CNT and ACRN_PMCMD_GET_PX_DATA return (-1).
Tracked-On: #8168
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
HPET is used to calibrate the tsc frequency if system fails to
get the accurate frequency from CPUID 0x15. But on some platforms
(for example: the emulated ACRN on QEMU) HPET is not started
by default, which causes the failure of calibration TSC by HPET.
Tracked-On: #8113
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In order to improve DX, 'DISABLED' style configurator settings are
changed to 'ENABLED' style. The meaning of the MACROs are reversed,
so in the hv code we have to change '#ifndef' -> '#ifdef' or
'#ifdef' -> '#ifndef'.
Including:
- MCE_ON_PSC_DISABLED -> MCE_ON_PSC_ENABLED
- ENFORCE_TURNOFF_AC -> SPLIT_LOCK_DETECTION_ENABLED
- ENFORCE_TURNOFF_GP -> UC_LOCK_DETECTION_ENABLED
Tracked-On: #7661
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
BVT schedule rule:
When a new thread is wakeup and added to runqueue, it will get the
smallest avt (svt) from runqueue to initiate its avt. If the svt is
smaller than it's avt, it will keep the original avt. With the svt, it
can prevent a thread from claiming an excessive share of CPU after
sleepting for a long time.
For the reboot issue, when the VM is reboot, it means a new vcpu thread
is wakeup, but at this time, the Service VM's vcpu thread is blocked,
and removed from the runqueue, and the runqueue is empty, so the svt is
0. The new vcpu thread will get avt=0. avt=0 means very high priority,
and can run for a very long time until it catch up with other thread's
avt in runqueue.
At this time, when Service VM's vcpu thread wakeup, it will check the
svt, but the svt is very small, so will not update it's avt according to
the rule, thus has a very low priority and cannot be scheduled.
To fix it, update svt in pick_next handler to make sure svt is align
with the avt of the first obj in runqueue.
Tracked-On: #7944
Signed-off-by: Conghui <conghui.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
This function is registered as PCI MMIO configuration
access handler, which processes PCI configuration access
request from ACRN guest hence the inputs shall be validated
to avoid potential hypervisor crash when handling inputs
from malicious guests.
Tracked-On: #7902
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. make memcpy_erms as a public API; add a new one
memcpy_erms_backwards, which supports to copy data from tail to head.
2. improve to use right/left/home/end key to move cursor, and support
delete/backspace key to modify current input command.
Tracked-On: #7931
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. buffer history commands.
2. support up/down key to select history buffered commands
Tracked-On: #7931
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When LAPIC timer is working in oneshot or periodic mode, OS uses
initial counter register/current counter register to program
a timer. Both initial counter and current counter depend on the
LAPIC frequency. ACRN emulated vLAPIC timer based on the TSC.
vLAPIC freq is the same as TSC freq.
Tracked-On: #7876
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
For platform that supports RRSBA (Restricted Return Stack Buffer
Alternate), using retpoline may not be sufficient to guard against branch
history injection or intra-mode branch target injection. RRSBA must
be disabled to prevent CPUs from using alternate predictors for RETs.
Quoting Intel CVE-2022-0001/CVE-2022-0002:
Where software is using retpoline as a mitigation for BHI or intra-mode BTI,
and the processor both enumerates RRSBA and enumerates RRSBA_DIS controls,
it should disable this behavior.
...
Software using retpoline as a mitigation for BHI or intra-mode BTI should use
these new indirect predictor controls to disable alternate predictors for RETs.
See: https://www.intel.com/content/www/us/en/developer/articles/technical/
software-security-guidance/technical-documentation/branch-history-injection.html
Tracked-On: #7907
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
TLFS defined 2 vMSRs which can be used by Windows guest to get the
TSC/APIC frequencies from hypervisor. This patch adds the support
of HV_X64_MSR_TSC_FREQUENCY/HV_X64_MSR_APIC_FREQUENCY vMSRS whose
availability is exposed by CPUID.0x40000003:EAX[bit11] and EDX[bit8].
v1->v2:
- revise commit message to highlight that the changes are for WaaG
Tracked-On: #7876
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
On some platforms CPUID.0x15:ECX is zero and CPUID.0x16 can
only return the TSC frequency in MHZ which is not accurate.
For example the TSC frequency obtained by CPUID.0x16 is 2300
MHZ and the TSC frequency calibrated by HPET is 2303.998 MHZ
which is much closer to the actual TSC frequency 2304.000 MHZ.
This patch adds the support of using HPET to calibrate TSC
when HPET is available and CPUID.0x15:ECX is zero.
v3->v4:
- move calc_tsc_by_hpet into hpet_calibrate_tsc
v2->v3:
- remove the NULL check in hpet_init
- remove ""& 0xFFFFFFFFU" in tsc_read_hpet
- add comment for the counter wrap in the low 32 bits in
calc_tsc_by_hpet
- use a dedicated function for hpet_calibrate_tsc
v1->v2:
- change native_calibrate_tsc_cpuid_0x15/0x16 to
native_calculate_tsc_cpuid_0x15/0x16
- move hpet_init to BSP init
- encapsulate both HPET and PIT calibration to one function
- revise the commit message with an example"
Tracked-On: #7876
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Modified the copyright year range in code, and corrected "int32_tel"
into "Intel" in two "hypervisor/include/debug/profiling.h" and
"hypervisor/include/debug/profiling_internal.h".
Tracked-On: #7559
Signed-off-by: Ziheng Li <ziheng.li@intel.com>
As mentioned in previous patch, wbinvd utilizes the vcpu_make_request
and signal_event call pair to stall other vcpus. Due to the fact that
these two calls are not thread-safe, we need to avoid concurrent call to
this API pair.
This patch adds wbinvd lock to serialize wbinvd emulation.
Tracked-On: #7887
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Commit d575edf79a changes the internal
implementation of wait_event and signal_event to use a counter instead
of a boolean value.
The background was:
ACRN utilizes vcpu_make_request and signal_event pair to shoot down
other vcpus and let them wait for signals. vcpu_make_request eventually
leads to target vcpu calling wait_event.
However vcpu_make_request/signal_event pair was not thread-safe,
and concurrent calls of this pair of API could lead to problems.
One such example is the concurrent wbinvd emulation, where vcpus may
concurrently issue vcpu_make_request/signal_event to synchronize wbinvd
emulation.
d575edf commit uses a counter in internal implementation of
wait_event/signal_event to avoid data races.
However by using a counter, the wait/signal pair now carries semantics of
semaphores instead of events. Semaphores require caller to carefully
plan their calls instead of multiply signaling any number of times to the same
event, which deviates from the original "event" semantics.
This patch changes the API implementation back to boolean-based, and
re-resolve the issue of concurrent wbinvd in next patch.
This also partially reverts commit 10963b04d1,
which was introduced because of the d575edf.
Tracked-On: #7887
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To avoid hardcoding the minimum "iasl" version in multiple places, IASL_MIN_VER
is defined in the top-level Makefile and is passed to config_tools.
This patch verifies "iasl" version against IASL_MIN_VER directly in
config_tools.
Tracked-On: #7880
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
At build time (on the *dev* machine), config_tools depends on "iasl" to
generate the binary of ACPI tables for pre-launched VMs.
This patch does:
- pass ASL_COMPILER to config_tools
By default, ASL_COMPILER is initialized by "which iasl" at build time.
User could override it by specifying ASL_COMPILER as the build option,
like below:
make BOARD=xxxx SCENARIO=yyyy ASL_COMPILER=/usr/local/bin/iasl
- use ASL_COMPILER as the path to the "iasl" compiler in config_tools
v1 -> v2:
- add a check to make sure ASL_COMPILER is initialized to a value
Tracked-On: #7880
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
When CONFIG_MULTIBOOT2 is disabled, 'create_service_vm_efi_mmap_desc' is
unused and build fails because [-Werror=unused-function] is set.
boot/guest/bzimage_loader.c:188:17: error: 'create_service_vm_efi_mmap_desc' defined but not used [-Werror=unused-function]
188 | static uint16_t create_service_vm_efi_mmap_desc(struct acrn_vm *vm, struct efi_memory_desc *efi_mmap_desc)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Tracked-On: #7634
Signed-off-by: Qiang Zhang <qiang4.zhang@linux.intel.com>
Updates to the TSC members and maintainer list
* Update the Technical Steering Committee (TSC) members following the election
of Junjie Mao as the new chair
* Update Thomas Gleixner's email address since he joined Intel Corporation
* Delete the MAINTAINERS files in the 'hypervisor' and 'devicemodel' folders
as they are obsolete and unused.
Tracked-On: #7706
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
