When pass-thru GPU to pre-launched Linux guest,
need to pass GPU OpRegion to the guest.
Here's the detailed steps:
1. reserve a memory region in ve820 table for GPU OpRegion
2. build EPT mapping for GPU OpRegion to pass-thru OpRegion to guest
3. emulate the pci config register for OpRegion
For the third step, here's detailed description:
The address of OpRegion locates on PCI config space offset 0xFC,
Normal Linux guest won't write this register,
so we can regard this register as read-only.
When guest reads this register, return the emulated value.
When guest writes this register, ignore the operation.
Tracked-On: #6387
Signed-off-by: Liu,Junming <junming.liu@intel.com>
According to PCIe Spec, for a RW register bits, If the optional feature
that is associated with the bits is not implemented, the bits are permitted
to be hardwired to 0b. However Zephyr would use INTx Line Register as writable
even this PCI device has no INTx, so emulate INTx Line Register as writable.
Tracked-On: #6330
Signed-off-by: Fei Li <fei1.li@intel.com>
IC_ASSIGN_PCIDEV -> ACRN_IOCTL_ASSIGN_PCIDEV
IC_DEASSIGN_PCIDEV -> ACRN_IOCTL_DEASSIGN_PCIDEV
QUIRK_PTDEV -> ACRN_PTDEV_QUIRK_ASSIGN
struct acrn_assign_pcidev -> struct acrn_pcidev
Move struct acrn_pcidev into acrn_common.h because it is used by both
DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
For a pci BAR, its size aligned bits have fixed to 0(except the memory
type bits, they have another fixed value), they are read-only.
When write ~0U to BAR for sizing, (type_bits | size_mask) is written
into BAR.
So do not need to distinguish between sizing vBAR and programming vBAR.
When write a value to vBAR, always store (value & size_mask | type_bit)
to vfcg.
pci_vdev_read_vbar() is unnecessary, because it is only need to read
vcfg.
Tracked-On: #6011
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Li Fei <fei1.li@intel.com>
When guest doing BAR re-programming, we should check whether
the base address of the BAR is valid.This patch does this check by:
1. whether the gpa is located in the responding MMIO window
2. whether the gpa is aligned with the BAR size
Tracked-On: #6011
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Li Fei <fei1.li@intel.com>
Instead of "#include <x86/foo.h>", use "#include <asm/foo.h>".
In other words, we are adopting the same practice in Linux kernel.
Tracked-On: #5920
Signed-off-by: Liang Yi <yi.liang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Requires explicit arch path name in the include directive.
The config scripts was also updated to reflect this change.
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
This patch denies Service VM the access permission to device resources
owned by hypervisor.
HV may own these devices: (1) debug uart pci device for debug version
(2) type 1 pci device if have pre-launched VMs.
Current implementation exposes the mmio/pio resource of HV owned devices
to SOS, should remove them from SOS.
Tracked-On: #5615
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
When wrong BAR address is set for pci-vuart, OS may assign a
new BAR address to it. Pci-vuart BAR can't be reprogrammed,
for its wrong fixed value. That can may because pci_vbar.fixed and
pci_vbar.type has overlap in abstraction, pci_vbar.fixed
has a confusing name, pci_vbar.type has PCIBAR_MEM64HI which is not
really a type of pci BARs.
So replace pci_vbar.type with pci_vbar.is_mem64hi, and change
pci_vbar.fixed to an union type with new name pci_vbar.bar_type.
Tracked-On: #5491
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
- fix bug in 'hcall_destroy_vdev()', the availability of
vpci device shall be checked on 'target_vm".
- refine 'vpci_update_one_vbar()' to avoid potential NULL
pointer access.
Tracked-On: #5490
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
cleanup vpci structure when shutdown_vm to avoid use uninitialized data
after reboot.
Tracked-On: #4958
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch enables doorbell feature for hv-land
ivshmem device to support interrupt notification
between VMs that use inter-VM(ivshmem) devices.
Tracked-On: #5407
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Li, Fei <fei1.li@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- write_vmsix_cap_reg(): emulates vmsix cap writes.
write_pt_vmsix_cap_reg(): emulates msix cap write
for PT devices.
- rw_vmsix_table(): emulates vmsix table bar space access.
- vmsix_handle_table_mmio_access(): emulates the vmsix
bar space access only.
- pt_vmsix_handle_table_mmio_access(): emulates the vmsix
bar space access and remap msi entry for PT device if
write operation is executed.
- rename 'init_vmsix()' and 'deinit_vmsix()' to
'init_vmsix_pt()' and 'deinit_vmsix_pt()' respectively,
they're for PT devices only.
- remove below 2 functions,call
'pci_vdev_read_vcfg()' directly in cases they're used.
- 'read_vmsi_cap_reg()'
- 'read_vmsix_cap_reg()'
Tracked-On: #5407
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Li, Fei <fei1.li@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Done <eddie.dong@intel.com>
Per PCI Firmware Specification Revision 3.0, 4.1.2. MCFG Table Description:
Memory Mapped Enhanced Configuration Space Base Address Allocation Structure
assign the Start Bus Number and the End Bus Number which could decoded by the
Host Bridge. We should not access the PCI device which bus number outside of
the range of [Start Bus Number, End Bus Number).
For ACRN, we should:
1. Don't detect PCI device which bus number outside the range of
[Start Bus Number, End Bus Number) of MCFG ACPI Table.
2. Only trap the ECAM MMIO size: [MMCFG_BASE_ADDRESS, MMCFG_BASE_ADDRESS +
(End Bus Number - Start Bus Number + 1) * 0x100000) for SOS.
Tracked-On: #5233
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Kernel driver and ACPI ASL may access a platform hidden device
thru PIO, e.g., Intel ICH LPC driver. If the access is originated
in SOS or Pre-launched OS, vpci_pio_cfgdata_write/read should support
it.
This commit also reworks vpci_write_cfg/vpci_read_cfg to do the access
check and elimiates the access from post-launched VM (that should be
handled by DM).
Tracked-On: #5257
Signed-off-by: Stanley Chang <stanley.chang@intel.com>
Reviewed-by: Li Fei <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
if device configuration vbdf is unassigned, then the corresponding
vdev will not be initialized, instead, the vdev will be initialized
by device model through hypercall.
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch introduces vpci_update_one_vbar API to simplify
vBAR mapping/unmapping when vBAR writing.
v2: refine commit message
v4: refine commit message
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When VM read pre-sriov header in ECAP of ptdev, only emulate the
reading if SRIOV is hidden.
Write to pre-sriov header is ignored so no need to fix writting.
Tracked-On: #5085
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Hide sriov capability of passthrough devices for VMs at init_vdev_pt().
And for post-launched VM, allow assign PF.
Tracked-On: #5041
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Support hide SRIOV extend capability for passthough device
Tracked-On: #5041
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
-- remove unnecessary lock in pci_mmcfg_read_cfg and
pci_mmcfg_write_cfg since the mmio operation is atomic
if the offest is aligned with 1/2/4 bytes.
-- move pci_is_valid_access to pci.h
Tracked-On: #4958
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
hv: pci: refine pci_find_vdev with hash
1. Refined pci_find_vdev with BDF-hashing for better performance
Tracked-On: #4857
Signed-off-by: Wang Qian <qian1.wang@intel.com>
Reviewed-by: Li Fei <Fei1.Li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Some passthrough devices require multiple MSI vectors, but don't
support MSI-X. In meanwhile, Linux kernel doesn't support continuous
vector allocation.
On native platform, this issue can be mitigated by IOMMU via interrupt
remapping. However, on ACRN, there is no vIOMMU.
vMSI-X on MSI emulation is one solution to mitigate this problem on ACRN.
This patch adds MSI-X emulation on MSI capability.
For the device needs to do MSI-X emulation, HV will hide MSI capability
and present MSI-X capability to guest.
The guest driver may need to modify to reqeust MSI-X vector.
For example:
ret = pci_alloc_irq_vectors(pdev, 1, STMMAC_MSI_VEC_MAX,
- PCI_IRQ_MSI);
+ PCI_IRQ_MSI | PCI_IRQ_MSIX);
To enable MSI-X emulation, the device should:
- 1. The device should be in vmsix_on_msi_devs array.
- 2. Support MSI, but don't support MSI-X.
- 3. MSI capability should support per-vector mask.
- 4. The device should have an unused BAR.
- 5. The device driver should not rely on PBA for functionality.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now Host Bridge and PCI Bridge could only be added to SOS's acrn_vm_pci_dev_config.
So For UOS, we always emualte Host Bridge and PCI Bridge for it and assign PCI device
to it; for SOS, if it's the highest severity VM, we will assign Host Bridge and PCI
Bridge to it directly, otherwise, we will emulate them same as UOS.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
According PCI Code and ID Assignment Specification Revision 1.11, a PCI device
whose Base Class is 06h and Sub-Class is 00h is a Host bridge.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Guest may write a MSI-X capability register with only RW bits setting on. This works
well on native since the hardware will make sure RO register bits could not over-write.
However, the software needs more efforts to achieve this. This patch does this by
defining a RW permission mapping base on bits. When a guest tries to write a MSI-X
Capability register, only modify the RW bits on vCFG space.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Guest may write a MSI capability register with only RW bits setting on. This works
well on native since the hardware will make sure RO register bits could not over-write.
However, the software needs more efforts to achieve this. This patch does this by
defining a RW permission mapping base on bits. When a guest tries to write a MSI
Capability register, only modify the RW bits on vCFG space.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
In commit 0a7770cb, we remove vm pointer in vpci structrue. So there's no need
for such pre-condition since vpci is embedded in vm structure. The vm can't be
NULL Once the vpci is not NULL.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
The existing code do separately for each VM when we deinit vpci of a VM. This is
not necessary. This patch use the common handling for all VMs: we first deassign
it from the (current) user, then give it back to its parent user.
When we deassign the vdev from the (current) user, we would de-initialize the
vMSI/VMSI-X remapping, so does the vMSI/vMSI-X data structure.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
Now we could know a device status by 'user' filed, like
---------------------------------------------------------------------------
| NULL | == vdev | != NULL && != vdev
vdev->user | device is de-init | used by itself VM | assigned to another VM
---------------------------------------------------------------------------
So we don't need to modify 'vpci' field accordingly.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
Add a new field 'parent_user' to record the parent user of the vdev. And refine
'new_owner' to 'user' to record who is the current user of the vdev. Like
-----------------------------------------------------------------------------------------------
vdev in | HV | pre-VM | SOS | post-VM
| | |vdev used by SOS|vdev used by post-VM|
-----------------------------------------------------------------------------------------------
parent_user| NULL(HV) | NULL(HV) | NULL(HV) | NULL(HV) | vdev in SOS
-----------------------------------------------------------------------------------------------
user | vdev in HV | vdev in pre-VM | vdev in SOS | vdev in post-VM | vdev in post-VM
-----------------------------------------------------------------------------------------------
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
Conceptually, the devices unregistration sequence of the shutdown process should be
opposite to create.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
We could use container_of to get vm structure pointer from vpci. So vm
structure pointer is no need in vpci structure.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
There're some PCI devices need special handler for vendor-specical feature or
capability CFG access. The Intel GPU is one of them. In order to keep the ACRN-HV
clean, we want to throw the qurik part of PCI CFG asccess to DM to handle.
To achieve this, we implement per-device policy base on whether it needs quirk handler
for a VM: each device could configure as "quirk pass through device" or not. For a
"quirk pass through device", we will handle the general part in HV and the quirk part
in DM. For a non "quirk pass through device", we will handle all the part in HV.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
There're some cases the SOS (higher severity guest) needs to access the
post-launched VM (lower severity guest) PCI CFG space:
1. The SR-IOV PF needs to reset the VF
2. Some pass through device still need DM to handle some quirk.
In the case a device is assigned to a UOS and is not in a zombie state, the SOS
is able to access, if and only if the SOS has higher severity than the UOS.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
To avoid information leakage, we need to ensure that the device is
inaccessble when it does not exist.
For SR-IOV disabled VF device, we have the following operations.
1. The configuration space accessing will get 0xFFFFFFFF as a
return value after set the device state to zombie.
2. The BAR MMIO EPT mapping are removed, the accesssing causes
EPT violation.
3. The device will be detached from IOMMU.
4. The IRQ pin and vector are released.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
change vmsi_read_cfg to read_vmsi_cfg, same applies to writing
change vmsix_read_cfg to read_vmsix_cfg, same applies to writing
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In order to add GVT-D support, we need pass through stolen memory and opregion memroy
to the post-launched VM. To implement this, we first reserve the GPA for stolen memory
and opregion memory through post-launched VM e820 table. Then we would build EPT mapping
between the GPA and the stolen memory and opregion memory real HPA. The last, we need to
return the GPA to post-launched VM if it wants to read the stolen memory and opregion
memory address and prevent post-launched VM to write the stolen memory and opregion memory
address register for now.
We do the GPA reserve and GPA to HPA EPT mapping in ACRN-DM and the stolen memory and
opregion memory CFG space register access emulation in ACRN-HV.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
VM needs to check if it owns this device before deiniting it.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We didn't support SR-IOV capability of PF in UOS for now, we should
hide the SR-IOV capability if we pass through the PF to a UOS.
For now, we don't support assignment of PF to a UOS.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Emulate Device ID, Vendor ID and MSE(Memory Space Enable) bit in
configuration space for an assigned VF, initialize assgined VF Bars.
The Device ID comes from PF's SRIOV capability
The Vendor ID comes from PF's Vendor ID
The PCI MSE bit always be set when VM reads from an assigned VF.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Change name find_vdev to find_available_vdev and add comments
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add _v prefix for some function name to indicate this function wants to operate
on virtual CFG space or virtual BAR register.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Removed the pci_vdev_write_cfg_u8/u16/u32 APIs and only used
pci_vdev_write_cfg as the API for writing vdev's cfgdata
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add cfg_header_read_cfg and cfg_header_write_cfg to handle the 1st 64B
CFG Space header PCI configuration space.
Only Command and Status Registers are pass through;
Only Command and Status Registers and Base Address Registers are writable.
In order to implement this, we add two type bit mask for per 4B register:
pass through mask and read-only mask. When pass through bit mask is set, this
means this bit of this 4B register is pass through, otherwise, it is virtualized;
When read-only mask is set, this means this bit of this 4B register is read-only,
otherwise, it's writable. We should write it to physical CFG space or virtual
CFG space base on whether the pass through bit mask is set or not.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Make the name of the functions more accurate
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add a new parameter pf_vdev for function vpci_init_vdev to support SRIOV
VF vdev initializaiton.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
